I've also changed the way the secondary error message is transported from former "header message 0 secondary 0" to "header header message 0 header secondary 0" as that might be a bit more clearer, and I'll need it for further development anyway.
I was using this while debugging and not recognizing the real problem - for about four hours :-(. I'll need this feature when doing the interface (and link layer type) browsing later (transferring this data from dumpcap to Ethereal) to get a full blown privilege seperation.
svn path=/trunk/; revision=17608
primary and secondary error messages and let the parent worry about how
to display them. This means dumpcap doesn't need stub routines for
generating the formatting tags for the primary and secondary messages.
Have a separate message for capture filter errors, so that the parent
can check whether the capture filter looks like a display filter and
report the appropriate message. This means that dumpcap doesn't need a
stub routine for compiling display filters (a stub routine also means
that Ethereal won't do the check for capture filters that look like
display filters!).
svn path=/trunk/; revision=17465
In "capture_input_new_file()", don't call the callbacks unless we
succeed in opening the new file. Have "capture_info_new_file()" return
a success/failure indication.
Improve the message logged when we fail to open the new file if we're
only opening it for the quick packet counts. We really should put up an
alert box and give up on the capture at that point.
svn path=/trunk/; revision=17437
this way, the capture prefix will "logically" group the files together and file browsers will also group them
we may want to move the files into a subdir capture later
svn path=/trunk/; revision=16691
This way, the capture child don't need to now any of the packet_counter things (no epan/packet.h and all alike).
Currently the capture_info code will always open another wiretap file instance to build it's own counter values. This isn't optimized for now (next step: use data from cf_continue_tail() somehow).
svn path=/trunk/; revision=16669
capture_input_drops
capture_input_error_message
and move the functionality from capture_sync.c to capture.c (just where it belongs)
svn path=/trunk/; revision=16663
link to CaptureSetup wiki page
Win32 only: wireless: "try switch off promicuous mode"
This way we might get less user questions on the users-mailing list ...
Especially the second one hopefully could save us from a lot of support mails :-)
svn path=/trunk/; revision=16591
to do this, I've added file_util.h to wiretap (would file_compat.h be a better name?), and provide compat_macros like eth_open() instead of open(). While at it, move other file related things there, like #include <io.h>, definition of O_BINARY and alike, so it's all in one place.
deleted related things from config.h.win32
As of these massive changes, I'm almost certain that this will break the Unix build. I'll keep an eye on the buildbot so hopefully everything is working again soon.
svn path=/trunk/; revision=16403
cf_cb_file_closing (called before closing a capture file) cf_cb_file_closed will be called afterwards, but both only if a file is really closed as cf_close is called more often ...
If we are closing large capture files (~20MB), the screen looks ugly while the file is closed. Change this so the screen will immediately go back to initial state and a dialog (without buttons) is shown that the file is currently closed. As the operation which takes most of the time to close the file is a single eth_clist_clear call, we can't use a progress bar here.
cf_cb_live_capture_stopping: called when the user wants to stop the capture (toolbar or menu clicked). At least on Win32, the time between this and the actual stop completed can be noticeable (1-2 seconds), so the user doesn't know if the button press did anything at all. Do something similar as above, show a dialog box without buttons to inform that the close is in progress.
svn path=/trunk/; revision=15891
use the console_log_handler in main.c for win32 AND unix now
Currently use the log for the capturing engine (only), as I desperately needed a log output for debugging.
svn path=/trunk/; revision=14438
to prevent problems, bring the main GUI into "capture mode" right after successfully spawn/exec the capture child, without waiting for any response from it
svn path=/trunk/; revision=14436
-show the current capture file size, if capturing in real time mode.
-move the packet "Drops" count (if available) from file to packets statusbar part
svn path=/trunk/; revision=14130
add a new feature to clear the currently captured packets and restart the capture with the previous parameters
various code cleanup and minor bugfixes
Win32: use millisecond resolution in capture_loop, to smooth screen update a bit (500ms instead of 1000ms)
svn path=/trunk/; revision=14059
If this is used together with an option where input files changes too fast (e.g. new file every second), capturing will be (hopefully) stopped.
I've replaced the former capture pipe message format into a somewhat more general format to remove a lot of confusion.
svn path=/trunk/; revision=14054
display filename in statusbar while capturing
print_usage banner fixed
cf_cb_live_capture_prepare no longer needed
rename sync_pipe_do_capture -> sync_pipe_start
bugfix: sync_pipe_input_wait_for_start replaced by former implementation
fix cleanup of old file in capture_input_new_file
fix a tempfile detection bug (named file showed up as tempfile after capture)
svn path=/trunk/; revision=14053
most notably:
- moved opening of safe_file to the capture child (capture_loop.c)
- removed save_file_fd from capture_opts (no longer need to have it global)
svn path=/trunk/; revision=13953
This is currently still disabled, as we cannot pass all required capture flags to the child process (lack of command line parameters).
svn path=/trunk/; revision=13558