equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
that it's not included in the tvbuff handed to subdissectors. Use that
tvbuff to compute the FCS.
Properly handle the FCS in frames that don't include all the captured
data.
In VJ-compressed packets, put the VJ compression information into the
protocol tree, and set the Protocol and Info columns, and don't worry
about the CRC - as per the above, it's no longer in the tvbuff (and
never *was* in the tvbuff in some cases).
Also, clean up some other stuff in the VJ dissector.
svn path=/trunk/; revision=5510
Declares some variables static.
Creates a new include file packet-rsvp.h, and make use of it
(change some extern decls to #inlcude).
Move the file packet-pgm.h into packet-pgm.c as it is not used
by anything outside packet-pgm.c.
svn path=/trunk/; revision=5162
Show the names of the control characters being mapped by the async
control character map option.
Use "proto_item_add_subtree()" to establish a subtree, so that the ett_
value gets associated with it. (Unfortunately, "proto_item" and
"proto_tree" are typedefs for the same type, so checks for use of one
when you should be using the other aren't done at compile time.)
Get rid of some extra blanks before colons.
svn path=/trunk/; revision=5067
Use the "optp" argument in more option dissectors, and set the name of
the option in the table entries for those options - and for one option
where that name *was* being used.
Get rid of unused variables.
svn path=/trunk/; revision=5061
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
items to the protocol tree; it's interpreted as "the rest of the data in
the tvbuff". This can be used if
1) the item covers the entire packet or the remaining payload in
the packet
or
2) the item's length won't be known until it's dissected, and
will be then set with "proto_item_set_len()" - if an
exception is thrown in the dissection, it means the item ran
*past* the end of the tvbuff, so saying it runs to the end of
the tvbuff is reasonable.
Convert a number of "proto_tree_add_XXX()" calls using
"tvb_length_remaining()", values derived from the result of
"tvb_length()", or 0 (in the case of items whose length is unknown) to
use -1 instead (using 0 means that if an exception is thrown, selecting
the item highlights nothing; using -1 means it highlights all the data
for that item that's available).
In some places where "tvb_length()" or "tvb_length_remaining()" was used
to determine how large a packet is, use "tvb_reported_length()" or
"tvb_reported_length_remaining()", instead - the first two calls
indicate how much captured data was in the packet, the latter two calls
indicate how large the packet actually was (and the fact that using the
latter could cause BoundsError exceptions to be thrown is a feature - if
such an exception is thrown, the frame really *was* short, and it should
be tagged as such).
Replace some "proto_tree_add_XXX()" calls with equivalent
"proto_tree_add_item()" calls.
Fix some indentation.
svn path=/trunk/; revision=4578
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
specifies how the selector values used as keys in those tables are to be
displayed, and the title to use when displaying the table.
Use that information in the code to display the initial and current
entries of various dissector tables.
Have the dissector for BACnet APDUs register itself by name, and have
the BACnet NPDU dissector call it iff the BAC_CONTROL_NET bit isn't set,
rather than doing it with a dissector table.
svn path=/trunk/; revision=4358
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
of packet data captured.
Make the "BYTES_ARE_IN_FRAME()" macro take a "captured length of the
packet" argument.
Add some length checks to capture routines.
svn path=/trunk/; revision=4235
1) Shiva PAP (SPAP) and Extensible Authentication Protocol (EAP)
2) CBCP negotiation in LCP Callback Operation Field
to the PPP dissector.
svn path=/trunk/; revision=3826
top-level protocol tree items, use "offset" to set the length, rather
than fetching the length of the item - "offset" is the offset from the
beginning of the Frame Relay or PPP header just past the last field
processed in that header, so it indicates how much of the header we've
processed.
svn path=/trunk/; revision=3215
"ppp_hdlc" dissector, and call the dissector for "raw" PPP (just RFC
1661, no HDLC encapsulation) the "ppp" dissector.
Have the common routine used by both those dissectors take the offset in
the tvbuff of the PPP protocol field as an argument, rather than
assuming that the protocol field begins at the beginning of the tvbuff,
so we don't have to construct a new tvbuff in the
PPP-in-HDLC-like-framing dissector.
Use the PPP dissector, not the PPP-in-HDLC-like-framing dissector, for
PPP over Frame Relay - there's no HDLC header in PPP over Frame Relay,
at least according to
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/pppframe.htm
svn path=/trunk/; revision=3208
protocols; this obviates the need for "dissect_ppp()" to look at the
protocol field at all.
Have "dissect_ppp_stuff()" add the length of the protocol field to the
length of the top-level protocol tree item, as only it knows how long
the field is.
Have "dissect_mp()" call "dissect_ppp_payload()", rather than
duplicating what "dissect_ppp_payload()" does itself.
Don't fetch the address and control fields in "dissect_ppp()" until
you're ready to put them into the protocol tree.
svn path=/trunk/; revision=3207
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
"pinfo->current_proto"; dissectors called only through dissector tables
and handles don't need to do either of those, as the dissector table and
handle code will do it for them. (Dissectors called directly, or
dissectors that can be attached to conversations, still have to do it
themselves.)
Register the PPP Multilink Protocol, PPP Link Control Protocol, and PPP
IP Control Protocol as official protocols, and register them in PPP's
dissector table rather than having PPP handle them specially; change
"dissect_cp()" to take a protocol ID, get the protocol short name
information from it, and use the protocol ID for the top-level protocol
tree item.
Set the Protocol column in the PPP Multilink Protocol dissector, and set
the Info column before extracting anything from the frame, so that if an
exception is thrown, the Info and Protocol columns will reflect that the
packet is supposed to be a PPP Multilink Protocol frame.
Make the "First fragment" and "Last fragment" flags in the PPP Multilink
Protocol header boolean bitfields, and let "proto_tree_add_boolean()" do
all the heavy lifting when displaying them, rather than doing it by
hand.
Don't extract the sequence number in the PPP Multilink Protocol until
you're ready to put it into the tree, just in case the captured packet
includes the flags but not the sequence number.
Clean up the code to check the FCS of PPP frames - extract it with
"tvb_get_letohs()" or "tvb_get_letohl()", don't extract it byte-by-byte
and then put it together yourself.
svn path=/trunk/; revision=2926
for "Bridging PDU"s (which I'm assuming are 802.1d Spanning Tree BPDUs),
and have the STP and LANBridge100 STP dissectors register them with the
"ppp.protocol" dissector table.
Fix the value for the PPP type for MPLS Multicast (it's 0x0283, not
0x0281).
svn path=/trunk/; revision=2896
dissectors for protcools that can be encapsulated inside GRE in that
table.
Fix a bug in the handling of WCCPv2 IP encapsulation (it was
constructing the next tvbuff before, rather than after, advancing the
offset past the redirection header).
svn path=/trunk/; revision=2893
its own; it's used not only by LLC, but by Frame Relay with RFC 2427 and
ATM with RFC 2684.
Support for RFC 2427-encapsulation Frame Relay packets, from Paul
Ionescu.
Get rid of the CISCO_IP PPP protocol type - Cisco HDLC uses, in most
cases, Ethernet packet types, so use ETHERTYPE_IP instead (they're both
0x0800).
svn path=/trunk/; revision=2854
"{old_}heur_dissector_add()", "{old_}conv_dissector_add()", and
"register_dissector()", so that an entry in those tables has associated
with it the protocol index of the protocol the dissector handles (or -1,
if there is no protocol index for it).
This is for future use in a number of places.
(Arguably, "proto_register_protocol()" should take a dissector pointer
as an argument, but
1) it'd have to handle both regular and heuristic dissectors;
2) making it take either a "dissector_t" or a union of that and
a "heur_dissector_t" introduces some painful header-file
interdependencies
so I'm punting on that for now. As with other Ethereal internal APIs,
these APIs are subject to change in the future, at least until Ethereal
1.0 comes out....)
svn path=/trunk/; revision=2849
"prefs_register_module()" except that it takes a protocol index as
returned by "proto_register_protocol()" as its first argument, rather
than taking two character strings as arguments as its first two
arguments, and uses the protocol's abbreviation as the name to use for
preferences in the preferences file and the "-o" flag and uses the
protocol's short name as the name to use in the tabs in the
"Edit->Preferences" window.
svn path=/trunk/; revision=2812