Without that, you could add a comment to a record in a file format the
reading code for which doesn't allocate blocks, but the comment doesn't
get saved, as there's no block in which to save the comment option.
This simplifies some code paths, as we're either using the record's
modified block or we're using the block as read from the file, there's
no third possibility.
If we attempt to read a record, and we get an error, and a block was
allocated for the record, unreference it, so the individual file readers
don't have to worry about it.
It only registers one file type/subtype, so rename it to
wtap_register_file_type_subtype().
That will also force plugins to be recompiled; that will produce compile
errors for some plugins that didn't change to match the new contents of
the file_type_subtype_info structure.
Also check to make sure that the registered file type/subtype supports
at least one type of block; a file type/subtype that doesn't return
*any* blocks and doesn't permit *any* block types to be written is not
very useful. That should also catch most if not all other plugins that
didn't change to match the new contents of the file_type_subtype_info
structure.
Don't make errors registering a file type/subtype fatal; just complain,
don't register the bogus file type/subtype, and drive on.
Instead of a "supports name resolution" Boolean and bitflags for types of
comments supported, provide a list of block types that the file
type/subtype supports, with each block type having a list of options
supported. Indicate whether "supported" means "one instance" or
"multiple instances".
"Supports" doesn't just mean "can be written", it also means "could be
read".
Rename WTAP_BLOCK_IF_DESCRIPTION to WTAP_BLOCK_IF_ID_AND_INFO, to
indicate that it provides, in addition to information about the
interface, an ID (implicitly, in pcapng files, by its ordinal number)
that is associated with every packet in the file. Emphasize that in
comments - just because your capture file format can list the interfaces
on which a capture was done, that doesn't mean it supports this; it
doesn't do so if the file doesn't indicate, for every packet, on which
of those interfaces it was captured (I'm looking at *you*, Microsoft
Network Monitor...).
Use APIs to query that information to do what the "does this file
type/subtype support name resolution information", "does this file
type/subtype support all of these comment types", and "does this file
type/subtype support - and require - interface IDs" APIs did.
Provide backwards compatibility for Lua.
This allows us to eliminate the WTAP_FILE_TYPE_SUBTYPE_ values for IBM's
iptrace; do so.
Provide a wiretap routine to get an array of all savable file
type/subtypes, sorted with pcap and pcapng at the top, followed by the
other types, sorted either by the name or the description.
Use that routine to list options for the -F flag for various commands
Rename wtap_get_savable_file_types_subtypes() to
wtap_get_savable_file_types_subtypes_for_file(), to indicate that it
provides an array of all file type/subtypes in which a given file can be
saved. Have it sort all types, other than the default type/subtype and,
if there is one, the "other" type (both of which are put at the top), by
the name or the description.
Don't allow wtap_register_file_type_subtypes() to override any existing
registrations; have them always register a new type. In that routine,
if there are any emply slots in the table, due to an entry being
unregistered, use it rather than allocating a new slot.
Don't allow unregistration of built-in types.
Rename the "dump open table" to the "file type/subtype table", as it has
entries for all types/subtypes, even if we can't write them.
Initialize that table in a routine that pre-allocates the GArray before
filling it with built-in types/subtypes, so it doesn't keep getting
reallocated.
Get rid of wtap_num_file_types_subtypes - it's just a copy of the size
of the GArray.
Don't have wtap_file_type_subtype_description() crash if handed an
file type/subtype that isn't a valid array index - just return NULL, as
we do with wtap_file_type_subtype_name().
In wtap_name_to_file_type_subtype(), don't use WTAP_FILE_TYPE_SUBTYPE_
names for the backwards-compatibility names - map those names to the
current names, and then look them up. This reduces the number of
uses of hardwired WTAP_FILE_TYPE_SUBTYPE_ values.
Clean up the type of wtap_module_count - it has no need to be a gulong.
Have built-in wiretap file handlers register names to be used for their
file type/subtypes, rather than building the table in init.lua.
Add a new Lua C function get_wtap_filetypes() to construct the
wtap_filetypes table, based on the registered names, and use it in
init.lua.
Add a #define WSLUA_INTERNAL_FUNCTION to register functions intended
only for internal use in init.lua, so they can be made available from
Lua without being documented.
Get rid of WTAP_NUM_FILE_TYPES_SUBTYPES - most code has no need to use
it, as it can just request arrays of types, and the space of
type/subtype codes can be sparse due to registration in any case, so
code has to be careful using it.
wtap_get_num_file_types_subtypes() is no longer used, so remove it. It
returns the number of elements in the file type/subtype array, which is
not necessarily the name of known file type/subtypes, as there may have
been some deregistered types, and those types do *not* get removed from
the array, they just get cleared so that they're available for future
allocation (we don't want the indices of any registered types to changes
if another type is deregistered, as those indicates are the type/subtype
values, so we can't shrink the array).
Clean up white space and remove some comments that shouldn't have been
added.
Remove most of the built-in file types from the table in
wiretap/file_access.c and, instead, have the file types register
themselves, using wtap_register_file_type_subtypes().
This reduces the source code changes needed to add a new file type from
three (add the handler, add the file type to the table in file_access.c,
add a #define for the file type in wiretap/wtap.h) to one (add the
handler). (It also requires adding the handler's source file to
wiretap/CMakeLists.txt, but that's required in both cases.)
A few remain because the WTAP_FILE_TYPE_SUBTYPE_ #define is used
elsewhere; that needs to be fixed.
Fix the wiretap/CMakefile.txt file to scan k12text.l, as that now
contains a registration routine. In the process, avoid scanning files
that don't implement a file type and won't ever have a registration
routine.
Add a Lua routine to fetch the total number of file types; we use that
in some code to construct the wtap_filetypes table, which we need to do
in order to continue to have all the values that used to come from the
WTAP_FILE_TYPE_SUBTYPE_ types.
While we're at it, add modelines to a file that lacked them.
Adds a pre-commit hook for detecting and replacing
occurrences of `g_malloc()` and `wmem_alloc()` with
`g_new()` and `wmem_new()`, to improve the
readability of Wireshark's code, and
occurrences of
`g_malloc(sizeof(struct myobj) * foo)`
with
`g_new(struct myobj, foo)`
to prevent integer overflows
Also fixes all existing occurrences across
the codebase.
That makes them work as input to a mergecap that writes pcapng files.
File types that don't have a single per-file encapsulation type need
more work, with multiple fake IDBs, one for each packet encapsulation
type seen in the file, unless we can generate real IDBs.
Change-Id: I2859e4f7fb15ec0c0f31a4044dc15638e5db7826
Reviewed-on: https://code.wireshark.org/review/37983
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it - and the routines that implement it - work more like the
seek-read routine.
Change-Id: I0cace2d0e4c9ebfc21ac98fd1af1ec70f60a240d
Reviewed-on: https://code.wireshark.org/review/32727
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If, in the process of opening the input file, we determine that it has
packets of more than one link-layer type, we can catch attempts to write
that file to a file of a format that doesn't support more than one
link-layer type at the time we try to open the output file.
If, however, we don't discover that the file has more than one
link-layer type until we've already created the output file - for
example, if we have a pcapng file with a new IDB, with a different
link-layer type from previous IDBs, after packet blocks for the earlier
interfces - we can't catch that until we try to write the packet.
Currently, that causes the packet's data to be written out as is, so the
output file claims it's of the file's link-layer type, causing programs
reading the file to misdissect the packet.
Report WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED on the write attempt
instead, and have a nicer error message for
WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED on a write.
Change-Id: Ic41f2e4367cfe5667eb30c88cc6d3bfe422462f6
Reviewed-on: https://code.wireshark.org/review/30617
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If the seek forward is just skipping record content that's not
(currently) interesting, use wtap_read_bytes() with a null buffer
pointer; it catches short "reads" and requires less seeking, so it may
work better when reading from a pipe.
Change-Id: Ifb07d20e0391a8ed97da85149d971b4e9ef093a8
Reviewed-on: https://code.wireshark.org/review/17976
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It doesn't actually *close* any handle, so it's best called a "finish"
routine rather than a "close" routine.
In libwiretap modules, don't bother setting the finish routine pointer
to null - it's already initialized to null (it's probably best not to
require modules to set it).
Change-Id: I19554f3fb826db495f17b36600ae36222cbc21b0
Reviewed-on: https://code.wireshark.org/review/11659
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That indicates that it's a problem specific to *writing* capture files;
we've already converted some errors to that style, and added a new one
in that style.
Change-Id: I8268316fd8b1a9e301bf09ae970b4b1fbcb35c9d
Reviewed-on: https://code.wireshark.org/review/5826
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For cases where record (meta)data is something that can't be written out
in a particular file format, return WTAP_ERR_UNWRITABLE_REC_DATA along
with an err_info string.
Report (and free) that err_info string in cases where
WTAP_ERR_UNWRITABLE_REC_DATA is returned.
Clean up some other error reporting cases, and flag with an XXX some
cases where we aren't reporting errors at all, while we're at it.
Change-Id: I91d02093af0d42c24ec4634c2c773b30f3d39ab3
Reviewed-on: https://code.wireshark.org/review/5823
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it clearer what the problem is, and that it should only be
returned by the dump code path, not by the read code path.
Change-Id: Icc5c9cff43be6c073f0467607555fa7138c5d074
Reviewed-on: https://code.wireshark.org/review/5797
Reviewed-by: Guy Harris <guy@alum.mit.edu>
WTAP_ERR_UNSUPPORTED_ENCAP means "I can't *write* that particular
encapsulation type to a file of this format", which mainly means "that
file format simply can't handle packets of that type";
WTAP_ERR_UNSUPPORTED means "this file can't currently be supported by
Wireshark, as there's some feature in the file - such as a file or
per-packet encapsulation type - that we don't (yet) handle".
Change-Id: I53cadf9913d20efb2bccb29f61877b71d53807be
Reviewed-on: https://code.wireshark.org/review/5794
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Clean up some things we ran across while making those changes.
Change-Id: Ic0d8943d36e6e120d7af0a6148fad98015d1e83e
Reviewed-on: https://code.wireshark.org/review/4581
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Unlike the standard I/O routines, the code we introduced that supports
fast random seeking on gzipped files will always supply some specific
error code for read errors, so we don't need WTAP_ERR_CANT_READ.
Add WTAP_ERR_CANT_WRITE for writing, as we're still using the standard
I/O routines for that. Set errno to WTAP_ERR_CANT_WRITE before calling
fwrite() in wtap_dump_file_write(), so that it's used if fwrite() fails
without setting errno.
Change-Id: I6bf066a6838284a532737aa65fd0c9bb3639ad63
Reviewed-on: https://code.wireshark.org/review/4540
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add wtap_read_bytes(), which takes a FILE_T, a pointer, a byte count, an
error number pointer, and an error string pointer as arguments, and that
treats a short read of any sort, including a read that returns 0 bytes,
as a WTAP_ERR_SHORT_READ error, and that returns the error number and
string through its last two arguments.
Add wtap_read_bytes_or_eof(), which is similar, but that treats a read
that returns 0 bytes as an EOF, supplying an error number of 0 as an EOF
indication.
Use those in file readers; that simplifies the code and makes it less
likely that somebody will fail to supply the error number and error
string on a file read error.
Change-Id: Ia5dba2a6f81151e87b614461349d611cffc16210
Reviewed-on: https://code.wireshark.org/review/4512
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Pcap-ng files don't have a per-file time stamp resolution, they have a
per-interface time stamp resolution. Add new time stamp resolution
types of "unknown" and "per-packet", add the time stamp resolution to
struct wtap_pkthdr, have the libwiretap core initialize it to the
per-file time stamp resolution, and have pcap-ng do the same thing with
the resolution that it does with the packet encapsulation.
Get rid of the TS_PREC_AUTO_XXX values; just have TS_PREC_AUTO, which
means "use the packet's resolution to determine how many significant
digits to display". Rename all the WTAP_FILE_TSPREC_XXX values to
WTAP_TSPREC_XXX, as they're also used for per-packet values.
Change-Id: If9fd8f799b19836a5104aaa0870a951498886c69
Reviewed-on: https://code.wireshark.org/review/4349
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Otherwise, if you link with both libwiretap and libfiletap, it's
anybody's guess which one you get. That means you're wasting memory
with two copies of its routines if they're identical, and means
surprising behavior if they're not (which showed up when I was debugging
a double-free crash - fixing libwiretap's buffer_free() didn't fix the
problem, because Wireshark happened to be calling libfiletap' unfixed
buffer_free()).
There's nothing *tap-specific about Buffers, anyway, so it really
belongs in wsutil.
Change-Id: I91537e46917e91277981f8f3365a2c0873152870
Reviewed-on: https://code.wireshark.org/review/3066
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Applying part of Bug 7825
Change-Id: I460b5c61b04d793ccc27c25debbd5e8f08bc6974
Reviewed-on: https://code.wireshark.org/review/2280
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a "record type" field to "struct wtap_pkthdr"; currently, it can be
REC_TYPE_PACKET, for a record containing a packet, or
REC_TYPE_FILE_TYPE_SPECIFIC, for records containing file-type-specific
data.
Modify code that reads packets to be able to handle non-packet records,
even if that just means ignoring them.
Rename some routines to indicate that they handle more than just
packets.
We don't yet have any libwiretap code that supplies records other than
REC_TYPE_PACKET or that supporting writing records other than
REC_TYPE_PACKET, or any code to support plugins for handling
REC_TYPE_FILE_TYPE_SPECIFIC records; this is just the first step for bug
8590.
Change-Id: Idb40b78f17c2c3aea72031bcd252abf9bc11c813
Reviewed-on: https://code.wireshark.org/review/1773
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit c0c480d08c.
A better way to do this is to have the record type be part of struct wtap_pkthdr; that keeps the metadata for the record together and requires fewer API changes. That is in-progress.
Change-Id: Ic558f163a48e2c6d0df7f55e81a35a5e24b53bc6
Reviewed-on: https://code.wireshark.org/review/1741
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is the first step towards implementing the mechanisms requestd in
bug 8590; currently, we don't return any records other than packet
records from libwiretap, and just ignore non-packet records in the rest
of Wireshark, but this at least gets the ball rolling.
Change-Id: I34a45b54dd361f69fdad1a758d8ca4f42d67d574
Reviewed-on: https://code.wireshark.org/review/1736
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit 1abeb277f5.
This isn't building, and looks as if it requires significant work to fix.
Change-Id: I622b1bb243e353e874883a302ab419532b7601f2
Reviewed-on: https://code.wireshark.org/review/1568
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Start of refactoring Wiretap and breaking structures down into "generally useful fields for dissection" and "capture specific". Since this in intended as a "base" for Wiretap and Filetap, the "wft" prefix is used for "common" functionality.
The "architectural" changes can be found in cfile.h, wtap.h, wtap-int.h and (new file) wftap-int.h. Most of the other (painstaking) changes were really just the result of compiling those new architecture changes.
bug:9607
Change-Id: Ife858a61760d7a8a03be073546c0e7e582cab2ae
Reviewed-on: https://code.wireshark.org/review/1485
Reviewed-by: Michael Mann <mmann78@netscape.net>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
willing to read or that's bigger than will fit in the file format;
instead, report an error.
For the "I can't write a packet of that type in that file type" error,
report the file type in question.
svn path=/trunk/; revision=54882
subtypes, e.g. Network Monitor version 1 and Network Monitor version 2
are separate "file types", even though they both come from Network
Monitor.
Rename various functions, #defines, and variables appropriately.
svn path=/trunk/; revision=53166
as the "where to put the packet data" argument.
This lets more of the libwiretap code be common between the read and
seek-read code paths, and also allows for more flexibility in the "fill
in the data" path - we can expand the buffer as needed in both cases.
svn path=/trunk/; revision=49949
implemented wtap_dump_file_seek() and _tell()
implemented the previously declared but unimplemented wtap_dump_file_seek() and wtap_dump_file_tell() functions and used them in the seven files that had previously used a plain ftell or fseek and added error checking as appropriate. I also added a new error WTAP_ERR_CANT_SEEK_COMPRESSED and put it next to WTAP_ERR_CANT_SEEK causing renumbering of two of the existing error codes.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8416
svn path=/trunk/; revision=48348
wtap_file_read_expected_bytes() from an open routine - open routines are
supposed to return -1 on error, 0 if the file doesn't appear to be a
file of the specified type, or 1 if the file does appear to be a file of
the specified type, but those macros will cause the caller to return
FALSE on errors (so that, even if there's an I/O error, it reports "the
file isn't a file of the specified type" rather than "we got an error
trying to read the file").
When doing reads in an open routine before we've concluded that the file
is probably of the right type, return 0, rather than -1, if we get
WTAP_ERR_SHORT_READ - if we don't have enough data to check whether a
file is of a given type, we should keep trying other types, not give up.
For reads done *after* we've concluded the file is probably of the right
type, if a read doesn't return the number of bytes we asked for, but
returns an error of 0, return WTAP_ERR_SHORT_READ - the file is
apparently cut short.
For NetMon and NetXRay/Windows Sniffer files, use a #define for the
magic number size, and use that for both magic numbers.
svn path=/trunk/; revision=46803
Guy Harris