properly aligned"; "void *", at least when it's the return value of
ep_malloc(), means "pointer to properly-aligned chunk of memory". Use
"void *" in get_sdp_data_element() and its callers in that case, to
squelch compiler warnings.
svn path=/trunk/; revision=36790
P2P_DIR_SENT or P2P_DIR_RECV - it might be unknown.
Use some #defines for SDP data element IDs, and rename the routine that
gets data elements tor reflect what it does.
svn path=/trunk/; revision=35934
rules. (Is this the right fix? I had to remove a now meaningless
comparison of psm > 0x1000 (4096) since psm is now a guint8 not a guint16.)
svn path=/trunk/; revision=35463
Fix one of the "Conditional jump or move depends on uninitialised value(s)"
errors from Valgrind: always initialize *val in get_sdp_type().
svn path=/trunk/; revision=35343
Bluetooth profiles and protocols above RFCOMM and L2CAP can not be dissected correctly because the required information (server channel and dynamic PSM value mappings to services/profiles) about the type of data carried in the payload is not available. RFCOMM is currently hardcoded to handoff all payload data to the obex dissector though it may carry e.g. handsfree, dial-up networking or serial port profile related data.
The patch consists of modifcations to the following dissectors:
btsdp: Extraction of RFCOMM server channel and L2CAP dynamic PSM with service mapping is provided to RFCOMM and L2CAP through a tap interface. In addition, the packet list info is beautyfied and extended with more details for better
overview.
btl2cap: Adds a new dissector table with services and dynamic PSM mapping which is filled by a tap listner catching the info from btsdp. More info added to packet list.
btrfcomm: Adds a new dissector table with services and server channel mapping which is filled by a tap listner catching the info from btsdp. Dissectors for handsfree, dial-up netorking and serial port profiles (all based on RFCOMM) are also added.
btobex: Registers several obex based profiles (e.g. obex push, file transfer, basic printing etc.) in both RFCOMM and L2CAP. Some cleanup.
svn path=/trunk/; revision=35323
keys to have _uint in their names, to match the routines that handle
dissector tables with string keys. (Using _port can confuse people into
thinking they're intended solely for use with TCP/UDP/etc. ports when,
in fact, they work better for things such as Ethernet types, where the
binding of particular values to particular protocols are a lot
stronger.)
svn path=/trunk/; revision=35224
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
1) update SDP dissector with new IDs from assigned numbers document
https://www.bluetooth.org/apps/content/default.aspx?doc_id=49709
2) decode attribute IDs in an "attribute ID list" parameter (previously it
showed raw number only)
3) removed some duplicate entries in vs_service_classes
svn path=/trunk/; revision=24267
Added support for Symbian OS btsnoop.
The bluetooth HCI layer in Symbian OS can be configured to log all packets to a
file. The log format, "btsnoop" is based on the RFC1761 "snoop" format - but
differences in the header make it incompatible.
The btsnoop format supports logging of these formats:
"H1" (raw HCI packets without framing)
"H4" (HCI UART packets including packet type header)
"H5" (HCI 3 wire UART packets including framing)
"BCSP" (HCI bluecore serial protocol including framing)
"H1" and "H4" are section numbers in the original v1 bluetooth specifications,
but still used colloquially - wireshark's existing support for Linux bluez HCI
logs uses the "H4" name.
In practice, the "H1" format is used for H5,BCSP and USB HCI logs, as the HCI
packet logs are mainly useful for debugging higher layers, bluetooth profiles
and bluetooth applications.
From me:
Deleted some unused prototypes.
Mark an unused parameter.
svn path=/trunk/; revision=24263
most have been tagged unused (few have been deleted if dissector has not been
modified since a long time)
move packet-ssl-utils.c to DISSECTOR_SRC
svn path=/trunk/; revision=21431