Remove a couple useless if(tree)'s while in there.
Change-Id: Ie8de360f4590806eab0a4704b410341918251586
Reviewed-on: https://code.wireshark.org/review/14488
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Always look and set the uinteger64 member of the union for FT_BOOLEAN
values.
Bug: 12236
Change-Id: I7b0166e564b9d6cbb80051a81714a4b4c5f740a2
Reviewed-on: https://code.wireshark.org/review/14481
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In case no descriptors are in the trace, payload packets can
only be identified, if a clearly identified STREAM or CONTROL packet sets
class/subclass of the conversation
Change-Id: I30be30df908ede468fadf56fdef20f9869ce6b56
Reviewed-on: https://code.wireshark.org/review/14467
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Don't distribute gresource, it's redundant binary data, make the distribution
more similar to Qt instead.
We may want to check that glib-compile-resources is in the PATH during
configure.
Change-Id: I82c57f8169be0cbcac14d4ca79df8dece6c4d7ff
Reviewed-on: https://code.wireshark.org/review/14455
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Call QTreeWidget::timerEvent from ProtoTree::timerEvent, otherwise we
turn into the candy factory episode in I Love Lucy.
Do the equivalent in WirelessFrame while we're here. Neither QFrame or
QWidget use timers, but there's no guarantee that this will be the case
in the future.
Bug: 12258
Change-Id: I3cb0096fe2ed87176fec8d7361260b5388d75530
Reviewed-on: https://code.wireshark.org/review/14470
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jim Young <jim.young.ws@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
That seems to be where we're telling it to send its logs.
Change-Id: Ic15370bc1af858b82f0964fcc35189039061ccb7
Reviewed-on: https://code.wireshark.org/review/14476
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Split two media type strings with the properly placed comma.
Change-Id: Ia6026879b63b9f51c3f2e61d8709f43716f0c6e2
Reviewed-on: https://code.wireshark.org/review/14472
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When the "Display enhanced Info column data" preference is set, ensure that:
1. For non-MSP packets, path information (class/symbol) is displayed in the Info column for Forward Open, Forward Close, regular Message Router Request/Response messages
2. For MSP packets, don't display the class/symbol in the Info column (it's too wordy)
This now relies on an extra boolean passed to dissect_cip_data() to handle #2 above. Previously, this relied on checking a proto_item* for NULL, which is not correct.
Change-Id: I7532660bcb23bd664c1f5532256755922c4937d1
Reviewed-on: https://code.wireshark.org/review/14458
Reviewed-by: Guy Harris <guy@alum.mit.edu>
-Warray-bounds + the macros for strcmp() = pain. Either the macro is
doing something wrong or the compiler is confused, because
if( strcmp(argv[i],"--")==0 ) dashdash = 1;
should not produce
array index 3 is past the end of the array (which contains 3
elements)
Either 1) the macro is blithely running past the end of "--", which
does, indeed, contain only 3 elements, or 2) the compiler mistakenly
believes that the code generated by the macro is running past the end of
"--" when it isn't.
Change-Id: I4183e29272ba9e05b3b370efd90102f2226df7c3
Reviewed-on: https://code.wireshark.org/review/14469
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Run each "argument" test (e.g. "-nVxr" and "-nr") simultaneously in
the background. This should speed up our tests without reducing the
amount of fuzzing that we do.
Change-Id: I737d1dc09b31e07910d56632bec62da0f35fe222
Reviewed-on: https://code.wireshark.org/review/14432
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Our check scripts require 8 columns when using tab indentation with modelines
so use the same setting for EditorConfig.
Change-Id: I5a5a7c22a03866ee77c8fdc98d6582366950ce77
Reviewed-on: https://code.wireshark.org/review/14453
Reviewed-by: João Valverde <j@v6e.pt>
Sort the list of PIDL dissectors while we're at it.
Change-Id: Ice90bf9b14b440fdfe59d1639fc0674e326a9923
Reviewed-on: https://code.wireshark.org/review/14461
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Sort the list of PIDL dissectors while we're at it.
Change-Id: I1425046d6feaded7af94f4a852d8f0984bd0b736
Reviewed-on: https://code.wireshark.org/review/14460
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use "Funnel <title>" as dialog name to avoid a user defined dialog
title to be equal to a existing dialog title.
Change-Id: I3d21c87de8fe5852f37a18b4751fb4d4428ce6ea
Reviewed-on: https://code.wireshark.org/review/14450
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
A dissector must never assume that it will, or won't, be called with a
protocol tree; it's up to the Wireshark/TShark/etc. core to decide
whether to do it, and it can change its behavior over time or even
change it from release to release.
Have dissect_epath() take an argument that explicitly indicates whether
to add the CIP class to the Info column, rather than assuming that you
do so only if the tree pointer passed to it is null.
Bug: 12257
Change-Id: Ide8a6fc21252880f849a8d0aa4659a675bb3ae04
Reviewed-on: https://code.wireshark.org/review/14456
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Rather than storing RADIUS calls in a map keyed by the ident and conversation
store a tree of calls (using the the same key). Store each (non-duplicate)
call (request) in the tree, keyed by frame number. When looking for a match
(or a duplicate) look for the most-recently-seen frame in the tree (i.e., the
most recent frame with the same ident + conversation). Only declare a request
a duplicate if the authenticator is identical (as per RFC 5080 section 2.2.2).
Only store things in the map/tree on the first pass.
Remove the 'request_ttl' preference: it's better to show the user when the
response came back even if it was "late." (This also allows duplicate request
detection inside of the TTL.)
When telling the user about a duplicate don't tell them the ident again: they
already know that. Tell them the frame number of the original.
Use the FT_FRAMENUM_REQUEST/FT_FRAMENUM_RESPONSE hints.
Move a couple structures from the header file to the C file: they're only used
in the RADIUS dissector anyway.
Bug: 4096
Change-Id: I0e8bc0d23cd6b219cecd82f5c4cd765d28a14d98
Reviewed-on: https://code.wireshark.org/review/14451
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This includes not making assumptions about the order in which a GHashTable or
wmem_map implementation provides the keys to the GEqualFunc function
(apparently the former's order is different than the latter).
Change-Id: Ifbcb0f4f2c38b2ce6e44bf66c7246575af6299fa
Reviewed-on: https://code.wireshark.org/review/14448
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add missing newline or remove extra newlines at the end of the file.
Trim trailing whitespace.
Change-Id: I73b7a4e20969bc13f72bf97e981fd5de89d8bb17
Reviewed-on: https://code.wireshark.org/review/14400
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
The reason the notice in the INFO column disappeared when a display filter was
added is because the column operation was wrapped in an if(tree).
Change-Id: Ic8ff929d7ef601458b8650f8095f87282f9fde40
Reviewed-on: https://code.wireshark.org/review/14449
Reviewed-by: Michael Mann <mmann78@netscape.net>
Initial import of source code for the dissector of the ISO 8583-1
'financial transaction card originated messages - Interchange
message specification' standard.
Bug: 12244
Change-Id: I24804cab4a93131ec9afa307844ad62eb2e01089
Reviewed-on: https://code.wireshark.org/review/14311
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
A Proto may be only be registered with a heuristic dissector once,
because we check this in heur_dissector_add().
Change-Id: I524fa832b647d557f13aedcb870f7789058d2180
Reviewed-on: https://code.wireshark.org/review/14436
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
recv() can return negative value or 0 in "error cases".
There is need to check it. This also solved empty interfaces
list if there is unauthenticated device.
Bug: 12080
Change-Id: If6cd0e0933b64e9ac9bbb66b3b8138f7177451d1
Reviewed-on: https://code.wireshark.org/review/14316
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Change-Id: I5c7529bc630ad7312011b04ce101ba3608041d35
Reviewed-on: https://code.wireshark.org/review/14435
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Things like [Reassembled TCP segments] can add superfluous leaves so just walking down the tree from current location, so walk up the tree as well.
Bug: 1734
Change-Id: I91af554b59e1a6867dba9189ba37db5e396d892a
Reviewed-on: https://code.wireshark.org/review/14393
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Try to avoid the following call graph:
ProtoTree::expandAll
...
ProtoTree::expand
...
QTreeView::resizeColumnToContents
QTreeView::resizeColumnToContents calls sizeHintForColumn, which
iterates over a number of items (default 1000). Calling it from
ProtoTree::expand can lead to excessive wheel-spinning.
Add a single-shot timer for resizeColumnToContents. This is similar to
what QTreeView does internally when columns are resized.
Bug: 12228
Change-Id: I7b50c1486b3a25817efae58efbb8c9e961dbdab0
Reviewed-on: https://code.wireshark.org/review/14411
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>