same (which raises the question "so why the heck are there two types?" -
note that the way you're supposed to tell Ethernet from 802.3 packets is
by looking at the value of the type/length field; both of them can be
transmitted on the same wire), so we'll treat them the same.
svn path=/trunk/; revision=733
tree to anything other than 0, as we're going to change it to the right
value once the control field has been parsed and we know the right value.
svn path=/trunk/; revision=731
xDLC control field, so that its caller can not only determine from it
whether the frame has a payload, but can also determine how long the
control field is. Put macros in "xdlc.h" to determine both of those.
Have "capture_llc()" and "dissect_llc()" use that information
appropriately.
svn path=/trunk/; revision=727
- Capture->Start->"Active name resolution"
Allows the user to turn on/off name resolution
during a live capture.
- Display->Options->"Name resolution"
Turn on/off name resolution for the displayed
data (or during the -S mode).
E.g. clicking on a packet captured with
resolution disabled will resolve names in
the detailed list if this option is set.
And applying or resetting a display filter
allows the update of the packet list as well.
svn path=/trunk/; revision=726
us, at that point, a character with the 8th bit set) complaint about a
"char" array subscript in an "isdigit()" call by making the character
unsigned.
svn path=/trunk/; revision=724
"zlib" was built in FreeBSD 3.2 (and possibly other 4.4-Lite-derived
BSDs), if HAVE_UNISTD_H is defined before "zlib.h" is included, the
declaration of "gzseek()" in "zlib.h" expands to something that doesn't
match what's in the OS's "zlib".
svn path=/trunk/; revision=721
The "fh" member of a "wtap" structure points to something constructed
from the "fd" member of that structure, so that closing the stream
referred to by "fh" also closes the underlying file descriptor; get rid
of an unnecessary close of "wth->fd".
svn path=/trunk/; revision=720
name, stuff as much of the name as will fit into the buffer before
returning an error, so the error message that gets displayed isn't
completely mangled.
svn path=/trunk/; revision=716
current capture file if it's a temporary file, out of paranoia (so that
we don't get into a state where we have a capture file open but unlinked
- it's probably harmless to be in that state, as the file will remain
around until close, modulo NFS fun, and we may never be in that state
for very long, but I'd rather have it obviously stated in the code).
Remove the close in "capture()", and put one before the other call to
"capture()", in "main_realize_cb()" (is that call necessary, e.g. if you
pass "-r <filename>" *and* "-k", for some perverse reason, as
command-line arguments?).
If "cf.save_file" is non-null, free it before setting it, regardless of
whether it refers to a temporary file name or not.
svn path=/trunk/; revision=712
list of packets in real time" in the "Capture/Start" dialog box,
"ethereal -F" won't work - you get your choice of non-forked capture or
"-S".
Don't have "fork_mode" track "sync_mode"; instead, in those places where
we check for "fork_mode", check for "sync_mode" as well.
svn path=/trunk/; revision=711
child will nuke that file before we get to open the capture in
"tail_cap_file()" - assuming we do, because the capture may not start.
If we fail while writing to, or closing, a capture file we've opened for
writing, don't treat that as a capture error, as we may have saved at
least some packets to the capture file (that's the way it worked before
my recent checkins).
svn path=/trunk/; revision=710
and to fork off and run a separate copy of "ethereal" for "-S" and "-F"
captures or just call "capture()" otherwise, out of "gtk/capture_dlg.c"
and into a routine in "capture.c".
If the attempt to create said temporary capture file fails, pop up a
dialog box and don't do the capture.
Have the child capture process send a message upstream after it either
successfully starts the capture and syncs out the header of the capture
file, or fails to start the capture; the message indicates whether it
succeeded or failed, and, if it failed, includes a failure message.
This:
avoids the use of a signal, and thus means we don't have to
worry about whether to capture the signal, or whether to start
or stop capturing depending on whether this particular capture
is in sync mode or not;
lets us pop up the message box for the error in the parent
process if we're in sync mode, rather than doing it in the
child, which didn't work well.
Add a check button to the Capture/Start dialog box, so that we can
control, for each capture, whether it's to be done in sync mode or not.
svn path=/trunk/; revision=708
than the size of the reads we do, so that we have an extra byte at the
end into which we can stick a '\0' to guarantee null-termination of the
buffer.
When reading the capture file in "tail_cap_file()", use "file_open()"
rather than "fopen()", so that we work correctly if we're using "zlib"
to read capture files.
svn path=/trunk/; revision=707
"try_tempfile()" - the first component of the name comes from the "dir"
argument, so use its length, not the length of the string in the buffer
it should fill in (said buffer may contain garbage, which may not *be* a
C string).
svn path=/trunk/; revision=705
not, so it's OK to use "zlib" to read capture files, as it handles
uncompressed files correctly.
When *writing* capture files, however, we can't detect automatically
whether the user wanted to write the file out as a compressed file or
not, so we should *NOT* use "zlib" until we add a flag to the API
specifying whether to write the file out as a compressed file or not.
Furthermore, the code in Ethereal that implements the "-S" flag depends
on being able to get the "FILE *" for a capture file being written, so
that it can "fflush()" it.
svn path=/trunk/; revision=703
bounce bar for compressed file support). Note that the progress bar may
not grow smoothly for compressed files, but it should be reasonably accurate
for files which are large enough to matter.
svn path=/trunk/; revision=701
short packets. Also increased RIF processing from 18 to 30 bytes of RIF, as
I learned that the token-ring spec changed. Don't call next dissector
if there are no more bytes in packet.
svn path=/trunk/; revision=698
gzip. The zLib library is used for this purpose. If zLib is not available
(or it's use is disabled by the --disable-zlib option to configure), you
can still compile Ethereal but it will be unable to read compressed capture
files.
IMPORTANT:
Now all file accesses to capture files should be done through special macros.
Specifically, for any use of the following functions on capture files, replace them.
The arguments for the right-side functions are exactly the same as for the
original stdio functions.
fopen file_open
fdopen filed_open
fread file_read
fwrite file_write
fseek file_seek
fclose file_close
ferror file_error
svn path=/trunk/; revision=695
data corresponds to the attribute sequence belonging to the previous
delimiter tag, so set the length of the item for the previous delimiter
tag.
The "end of attributes" tag means "no more attributes after this, just
data"; dissect any stuff following it as data.
svn path=/trunk/; revision=686
specified number of bytes of captured data in the frame at the specified
offset, and a "IS_DATA_IN_FRAME()" macro, to test whether there are any
bytes of captured data in the frame at the specified offset, and convert
some bounds checks to use them.
Add a dissector for the Internet Printing Protocol.
svn path=/trunk/; revision=685