By default QMainWindow::createPopupMenu shows a checkable list of
toolbars which aren't synced with our actions under the View menu.
Replace it with a version that handles all the main window widgets.
Change-Id: I5f5c23880133e97e815d3bbbf19ea3bacc482096
Reviewed-on: https://code.wireshark.org/review/8958
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Please found it under Bluetooth menu. It shows all devices found
in logs, not only connected, all that its address can be found in
logs. Show if device is local (in most cases: capturing on it side)
and manufacturer and LMP version what should answer the question what
version of Bluetooth is used by Bluetooth device chip.
Also firmware version.
Change-Id: I32e3b7100cdebcaa850b6541de0ab89dff41c0e1
Reviewed-on: https://code.wireshark.org/review/8901
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Most of the time you intend to go to a new packet, not to go to the previously selected one.
This makes it consistent with all the editors I have used so far.
Change-Id: Ib0cde3c8361a8c3103dd05d622eaba4ee7deab78
Reviewed-on: https://code.wireshark.org/review/8772
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Use a single overloaded dialog, similar to the GTK+ UI.
Change-Id: If85db14a7101770f115bef725f5145e0010c518d
Reviewed-on: https://code.wireshark.org/review/8776
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Changes from the GTK+ UI:
- The display filter is built on the fly with immediate syntax feedback.
- Slightly different layout.
- You can search for fields.
Make the plain SyntaxLineEdit a bit more plain.
Bug: 11128
Change-Id: I06a48cd7b9ba7b9dc193b0199540aede4eb62fa7
Reviewed-on: https://code.wireshark.org/review/8742
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Plumb in more capture file callbacks. Add common functions for setting
the status bar file information. Add and update code to match the GTK+
status bar behavior.
Make sure we update the capture file length when rescanning.
Bug: 10943
Change-Id: Ie84c7a57ee421d57ba3477f8dde3847aaafa1cd1
Reviewed-on: https://code.wireshark.org/review/8594
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Rename "stay_closed" to "dont_reopen" to match cf_save_records and its
GTK+ equivalent. Set "dont_reopen" to FALSE when we "Save As", otherwise
we crash on Windows.
Bug: 10904
Change-Id: I4bb10abc230439e10cc55ffbd5595bfbc0a34b6f
Reviewed-on: https://code.wireshark.org/review/8592
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a setCaptureStopFlag function to ProgressBar. Add a stopTapping
function and setCaptureStopFlag signal to CaptureFile. Use the new
plubming to stop tapping when the IO Graph dialog closes.
Bug: 10116
Change-Id: Ic46814eed18933f511d9d1ff37e2e7918741f353
Reviewed-on: https://code.wireshark.org/review/8480
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Implement the same functionality for "Apply as Column" as it
exists in the GTK version of Wireshark. Especially for the
context menu in the packet view panel.
Change-Id: Id25b7797616ff3b3acf7aa920395516c8a4e9bf9
Reviewed-on: https://code.wireshark.org/review/7604
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Don't call redrawVisiblePackets in PacketList::sectionResized. Otherwise
we trigger the crash in bug 11179. Call recent_set_column_width instead.
Clean up the slots called when column preferences change and when recent
column widths change.
Update our column visibility in redrawVisiblePackets.
Use recent_get_column_width when writing the recent file. columnWidth
doesn't return a valid value when we're not visible.
Bug: 11179.
Change-Id: I34ab93d944b341e42129a1c8ff94ba8f7ad4f5fc
Reviewed-on: https://code.wireshark.org/review/8457
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
10947 Qt Wireshark - The lower left status bar reports "Ready to load or capture" when a live capture is active
Reported by Jim Young
Bug: 10947
Change-Id: I7dcd5081194bbeab43fef4d994220ac3ea23f536
Reviewed-on: https://code.wireshark.org/review/8067
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Show all expert messages in a combined view. Group top-level items by a
(severity, group, protocol) tuple.
Let the user enable and disable messages via a check menu.
Add ProtoTree::goToField and expert_info_t.hf_index. Use them to jump to
what we hope is the afflicted item.
Enable the context menu only if the user has selected a packet item.
Add a free-form search field that matches expert summaries.
This differs from the GTK+ version but hopefully provides a smoother
workflow.
Bug: 10931
Change-Id: Ia12cb7c27cdea1634fa2798fb7e4c1b23bd16ad2
Reviewed-on: https://code.wireshark.org/review/8294
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Implementing a button in the interface list, to bring up
the extcap options dialog, as well as a dialog, which will
be generated depending on the selected extcap options.
Change-Id: I1733dc6a8c1a121089a9c353aff10bc4a53e86de
Reviewed-on: https://code.wireshark.org/review/8224
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
on_actionExternalMenu_triggered() triggered a warning, as no menu
exists on the automatic UI configuration.
Change-Id: Ic3dc4c2c9e4c95ec4bbea01bd53af9a8c831e0d7
Reviewed-on: https://code.wireshark.org/review/8276
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Add a pointer to the callback, which will provide an enum value,
for each calling GUI entity, as well as a pointer to the main
structure for that entity.
For Qt this can be used for instance, to connect to slots of the
main instance, to update a calling dialog.
Change-Id: Ifa6b04f868512574de53b6bce507e343f6e219d4
Reviewed-on: https://code.wireshark.org/review/8085
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Plugins may utilize the tap interface to provide special tools
or analysis options, not otherwise available in Wireshark, or
perhaps not allowed to be distributed freely. Up until now, those
tools either had to start automatically, or could not be started
at all, or had to be started separately.
It should be possible, that those tools may be started using a
menu entry directly from Wireshark. This interface tries to achieve
exactly that.
This interface uses a clean interface, which can be implemented in
any plugin or dissector. Documentation for this has been added to
README.plugins.
Separators are only supported for now in the Qt interface, but
URLs can now be added as a simple item, and the UI will use the
same methods used for other URL calls to open them.
Change-Id: I170107dafb66f6badaa864d05a9091e5cbbf52c2
Reviewed-on: https://code.wireshark.org/review/7865
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The idea is allow to copy data from GUI by user,
what is currently case only for tshark.
The first option copy every item from Packet Details that are expanded (visibled).
The second option do the same but start on currently selected item/tree.
(let think about protocols like BT SDP where there is a lot of recursive subtrees)
Change-Id: I19c925d21293ceb8af2167c7d2c1b1b36507124e
Reviewed-on: https://code.wireshark.org/review/8047
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
The capture timer was never enabled on capture start or disabled on
capture stop. This is now implemented.
Bug: 10601
Change-Id: Iae23a952986a2c5dddf92b6ac0d1f1bc1c83719c
Reviewed-on: https://code.wireshark.org/review/7582
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add file_size_to_qstring and use it to show the file size. Add a
"shrinkable" property to LabelStack. Make the info status shrinkable.
Elide text so that long file paths don't widen the main window.
Change-Id: Ieb1caaf7e016384609d41fcabaa63d8f7a293eff
Bug: 10949
Reviewed-on: https://code.wireshark.org/review/7534
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Wireshark QT will close current opened file when popup open dialogue (File -> open), instead of keeping current file opened till new file is to be opened
Bug: 10962
Change-Id: I2062514ae648c95492e0160953c80d5303b8aba2
Reviewed-on: https://code.wireshark.org/review/7452
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Move the "find the frame" stuff to openPacketDialog(), and don't even
bother creating a new PacketDialog if we don't find the frame. This
should squelch Coverity CID 1270934, by giving up quickly if fdata is
null.
Change-Id: I4605ba7e271a55724f02cafed4122f9dd9b1b6f7
Reviewed-on: https://code.wireshark.org/review/7467
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add an "Auto Scroll in Live Capture" action to the Go menu. It's in the
View menu in the GTK+ UI but it seems to make more sense as a navigation
item.
Use a timeout interval for automatic scrolling. I haven't run any tests
to see if this makes a difference but it would seem that the less
drawing we do during a high speed capture the better, particularly for
remote displays.
Update the x-stay-last icons.
Note that we might want to make prefs.capture_auto_scroll a "recent"
setting.
Mark auto_scroll_live and packet_list_check_end GTK+ only.
Bug: 10601
Co-authored-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I645d27c0814f0e4a0d5b01ae68be366847e2522d
Reviewed-on: https://code.wireshark.org/review/7292
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add PacketList::applyRecentColumnWidths which set the packet list
column widths from our recent settings. Make sure it gets called at
startup and when we change profiles.
Save the packet list header state so that we can restore it when we
reset the model (i.e. freezing and thawing) and load a new capture file.
Save the state when the user resizes a column. As a side effect this
works around a weird bug that adjusts the width of column 1 at an
inopportune time.
Add a profileChanging signal so that we can save the main window geometry
in each profile.
Get rid of MainWindow::configurationProfileChanged. It was unused.
Apply saved pane widths and heights. Note that we might want to add a
separate pair of recent settings for the Qt panes.
Use the last opened directory in the capture file dialog.
Git rid of some unneeded Q_UNUSEDs while we're here.
Bug: 10953
Change-Id: I812aff59818cf0b4d1598b580627d32728d2e9d7
Reviewed-on: https://code.wireshark.org/review/7247
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Freeze and thaw the packet list when changing the layout. This has the
side effect of clearing the proto tree and byte view, which avoids
reading a bad tvb pointer. Note that we might want to add a cleanup
callback to free_data_sources.
Save and restore the current row. Add CaptureFile::currentRow. Fix a
couple of comparisons in PacketList.
Change-Id: I26f9b97ae5a7cdb4fb6e5e6e675570884900e995
Reviewed-on: https://code.wireshark.org/review/7337
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Check the return value of testCaptureFileClose in
MainWindow::openCaptureFile and add testCaptureFileClose to
MainWindow::closeEvent. Some of the file opening and closing behavior
still needs to be cleaned up but this should at least keep the user from
losing unsaved data.
Bug: 10944
Change-Id: I7d7b563a6b72f48b41a5a3aff2837655557869ff
Reviewed-on: https://code.wireshark.org/review/7283
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Bug: 10951
Change-Id: I958aa9e88c30ac20cd7d7971ee903ac97265c1f4
Reviewed-on: https://code.wireshark.org/review/7098
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Martin Kaiser <wireshark@kaiser.cx>
Allow persistence across files. Preserve the use of "window" even
though we're really a dialog.
Update ByteViewTab and ProtoTree to support multiple instances.
Remove the need for a cast in frame_data.
Add more forward declarations.
Change-Id: I50d3d9d1455b8ecc158a37218f9e41fe696d5ae2
Reviewed-on: https://code.wireshark.org/review/7086
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It is a GUI+QT feature that introduce Bluetooth menu and
"ATT Server Attributes" that present all handle+UUID pairs
as table. User may copy cell value, row, selected rows or whole
table within header. On activate user will go to packet that
introduce UUID for specified handle.
Change-Id: If17e53aff5feb89ededc740a595ba5882b90be5e
Reviewed-on: https://code.wireshark.org/review/6911
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Merge in the old ColorDialog which was a placeholder for
color_filter_add_cb.
Change-Id: I48d188509f480b8514122b4011ac9d8790fcca10
Reviewed-on: https://code.wireshark.org/review/6996
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Main window:
Keep track of our current layout and only change it if the preferences
change. This keeps the panes from resizing.
Re-select the current packet if the layout changes so that the proto
tree and byte view aren't left in an invalid state. This fixes a crash
similar to bug 10896.
Search frame:
Get rid of an invalid error message. Update coding style.
I don't think any of these fix bug 10921 since Xiaochuan seems to get a
crash immediately upon opening the dialog.
Change-Id: I0e880a50d3c9ac1c6ae6a01034b05fd2249444f4
Reviewed-on: https://code.wireshark.org/review/6989
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: Ib13d9391b64dad19321a4399c95b95d7fb791284
Reviewed-on: https://code.wireshark.org/review/6421
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Add keyboard shortcuts. Note that not all of the buttons made it from
GTK+. Add a "Go to setup frame" option.
Move rtp_streams.c from ui/gtk to ui.
Add a help URL for RTP analysis (which needs to be split into streams +
analysis).
Fix RTP stream packet marking.
Change-Id: Ifb8192ff701a933422509233d76461a46e459f4f
Reviewed-on: https://code.wireshark.org/review/6852
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I256fd5395b062fa954ebd60598721323ea1d7ff1
Bug: 10875
Reviewed-on: https://code.wireshark.org/review/6713
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Have dfilter_compile() take an additional gchar ** argument, pointing to
a gchar * item that, on error, gets set to point to a g_malloc()ed error
string. That removes one bit of global state from the display filter
parser, and doesn't impose a fixed limit on the error message strings.
Have fvalue_from_string() and fvalue_from_unparsed() take a gchar **
argument, pointer to a gchar * item, rather than an error-reporting
function, and set the gchar * item to point to a g_malloc()ed error
string on an error.
Allow either gchar ** argument to be null; if the argument is null, no
error message is allocated or provided.
Change-Id: Ibd36b8aaa9bf4234aa6efa1e7fb95f7037493b4c
Reviewed-on: https://code.wireshark.org/review/6608
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I7a40c0996517aa71b4ddb764ce3a6e92a55260ad
Reviewed-on: https://code.wireshark.org/review/6589
Reviewed-by: Michael Mann <mmann78@netscape.net>
Wireshark Qt does not add plug-ins that register with stats_tree_register_plugin() to the statistics menu in the ui (like the gtk version does).
This patch dynamically adds all registered stats_tree plug-ins to the statistics menu.
Bug: 9528
Change-Id: I99f9415502ca9f7121d494c856861edc1a762079
Signed-off-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-on: https://code.wireshark.org/review/6336
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Don't carry over the sort items from the GTK+ UI (for now, at least).
Update some names. Add a column editor frame similar to the "Go to
Packet" and "Search" frames.
Change-Id: I1bd3834a26994de96894d2b7512bce2c19915c77
Reviewed-on: https://code.wireshark.org/review/6277
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This affects both the dissector (that has been added with a tap interface and a stats generator) and the UI (to recall the stats menu).
Change-Id: I90658f7aa6707aa39bdd787a51b20fed4dbddc53
Reviewed-on: https://code.wireshark.org/review/6236
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Make the Sequence, IO Graph, Statistics Tree, and VoIP Calls dialogs
subclasses of WiresharkDialog.
Remove "Stats Tree" from Statistics Tree dialog titles. Don't complain
if the user opens more than one instance of the dialog.
Use the applicationName property in WiresharkApplication instead of a
separate variable.
Add a preexisting item to the IO Graph bug list (hovering when the file
is closed clears the graph).
Change-Id: I8411a25305d00b16e0d4a82fa50a9bad5c85b239
Reviewed-on: https://code.wireshark.org/review/6125
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add WiresharkDialog, a common base class for dialogs centered around
capture files. Make it a parent of Capture File Properties, Traffic
Table, Conversations, and Endpoints.
Rename CaptureFile::read_only_ to file_closed_. Add methods to
WiresharkApplication for generating consistent window titles.
Change-Id: Idc771556d8192e60f85dddc08fc4757698dee257
Reviewed-on: https://code.wireshark.org/review/6097
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add isValid, fileTitle, and retapPackets methods to CaptureFile. Add
application name and title separator convenience methods to
WiresharkApplication.
Convert traffic tables, conversations, and endpoints to use CaptureFile
directly and to let the user know when the capture file is closed. Set
the file dialog titles while we're here.
Change-Id: I990392786d3833e1e0b3638aa2d34a5ada39fa13
Reviewed-on: https://code.wireshark.org/review/5957
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Wrap the capture_file struct in a QObject which translates cf_cb_* and
capture_cb_* events into signals. Move the global cfile to
capture_file.cpp.
Don't use a void pointer for the capture file struct.
Change-Id: Ic5d5efb4bb1db64aa0247245890e5669b1da723a
Reviewed-on: https://code.wireshark.org/review/5885
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Wait until we've completely started up to show accumulated warnings and
errors.
Replace three periods with an ellipsis.
Change-Id: Ic3b268836e4e4429786c5eba4862cbc0458a19b5
Reviewed-on: https://code.wireshark.org/review/5762
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change the text from "Enable for" to "Resolve". Make the tooltips more
descriptive. List them in OSI model order.
Change-Id: Ie671ba9d55c609ce475f1681add0ad7d975f19cd
Reviewed-on: https://code.wireshark.org/review/5737
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Remove the preferences for the filter toolbar and mark them GTK+-only.
Change-Id: Ie48b19aee29a1cfcea4c41ca6c08ddbba3102377
Reviewed-on: https://code.wireshark.org/review/5693
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add Telephony menu items for VoIP Calls and SIP Flows. Put VoIP Calls at
the top, since that seems to be the primary item.
Add configure-time checks for QtMultimediaWidgets in anticipation of
adding a VoIP playback dialog.
Add an icon for the playback button. (Yes, I've been avoiding
GNOME-level gratuitous icons so far but this is one of the rare
occiasions where it makes sense.)
Add a help link define for the VoIP calls dialog.
Change-Id: I5d0799685c598ad9af76fe9667f8ea7d14b66050
Reviewed-on: https://code.wireshark.org/review/5674
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Go back to a single view similar to the GTK+ UI. Apply layouts using Qt
Designer.
Rename the menu item and class to "Capture File Properties". It's not
really a summary if it contains details such as "marked average bits
per second". We might want to move this to a "Properties" item under
the "File" menu similar to other applications.
Add the GTK+ summary icon (for now) to the toolbar and open the
properties dialog on clicking.
Singleton dialogs delenda est[1]. Let the user open as many summaries on
as many capture files as he or she wishes. Also, global cfile delenda
est[2].
Don't blindly include QtGui. Add specific components instead.
Use consistent method names, variable names, and patterns. Try to
document what "consistent" means.
Adjust the way we display some statistics to match the summary bar, e.g.
displayed = captured if we don't have a filter applied.
[1] Not really.
[2] Yes, really.
Change-Id: I11793b1d79dd0c3f70414ac8592b86181da59916
Reviewed-on: https://code.wireshark.org/review/5274
Reviewed-by: Gerald Combs <gerald@wireshark.org>
rename display_filter to read_filter in some places to make it clear
what it's used for
modify MainWindow::openCaptureFile() so that a read filter can be set
when the file name is passed in cf_path, not only when it's chosen from
a file selection dialogue
don't display the read filter string in the filter toolbar
Change-Id: Ie8dc94cbd1ff7e61ce1e2a55518a28297daa5d51
Reviewed-on: https://code.wireshark.org/review/5446
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
This improvement avoids use of deallocated memory (crash) if using a
deregistered field in display filter, color filter, custom column and
other cases when the field is used as "interesting field".
This functionality is currently used in http, imf and ldap preferences.
Also removed unused proto_registrar_n() as this does not work correctly
after deregistering fields.
Change-Id: I043e3bf7a98bd773c9801e712a012d1eab8a7f94
Reviewed-on: https://code.wireshark.org/review/5161
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Stig Bjørlykke <stig@bjorlykke.org>
Remove existing code which uses the visibilityChanged signal. It exists
in QToolbar but not QWidget. Use the actions to drive visibility
instead.
Update MainWindow::layoutPanes to respect "recent" settings.
Move the show / hide actions to the top of the View menu to match GTK+.
Change-Id: I670682e2a094945dbd36c80f43cd14515bbca5a6
Reviewed-on: https://code.wireshark.org/review/4911
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reselect the current packet when we redraw the packet list.
Don't crash if we try to mark when no frame is selected. Try to
invalidate cached packet list strings when needed. Rename
PacketList::updateAll to redrawVisiblePackets so that its purpose is
more clear. When changing the font size, call redrawVisiblePackets
instead of rebuilding the entire list of visible rows.
Change-Id: I6e7a15067e7063d0efc26082170e1795ae3c0779
Reviewed-on: https://code.wireshark.org/review/4901
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The "Check for Updates..." action doesn't exist when
QMetaObject::connectSlotsByName is called. Rename
on_actionHelpCheckForUpdates_triggered to checkForUpdates so that we
don't get the warning
QMetaObject::connectSlotsByName: No matching signal for on_actionHelpCheckForUpdates_triggered()
at startup.
Change-Id: Icbd7eb98731023c323212e6ec3d3c98f1321e245
Reviewed-on: https://code.wireshark.org/review/4510
Reviewed-by: Gerald Combs <gerald@wireshark.org>
If WIRESHARK_QUIT_AFTER_CAPTURE is set, call exit(0). This keeps us from
emitting the aboutToQuit signal and doing things that might pop up
dialogs.
Change-Id: I6e986b6e7ad824d8b5258e34a12c32869f5b2d34
Reviewed-on: https://code.wireshark.org/review/4421
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make sure the Qt UI quits if WIRESHARK_QUIT_AFTER_CAPTURE is set. Make
sure Bourne shell scripts (*.sh) have UNIX/POSIX line endings. Reduce
some time values so that the tests run faster.
Change-Id: I81df7c6f72d7d807d1856863cbea1bb6326ca711
Reviewed-on: https://code.wireshark.org/review/4407
Tested-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Fill in the capture-related mise en place so that -k and -i work. Get
rid of global_capture_session in ui/qt and make it a member of
MainWindow.
Copy over privilege checking from GTK+.
Move the global capture session struct to MainWindow.
Change-Id: Iab5ec683860a40255a7e1d82e3872ced24fd55cb
Reviewed-on: https://code.wireshark.org/review/4382
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Don't check syntax when we rebuild the CaptureFilterCombo.
Make sure we switch back to the main window when capturing fails.
Change-Id: Id4137e33a8135645f29ca7b2836c76b90f09e3ac
Reviewed-on: https://code.wireshark.org/review/4311
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make sure we set the "resolved" member of the column fmt_data struct.
Emitting WiresharkApplication::AppSignals from a modal dialog can cause
event loop problems on OS X. Queue them up in PreferencesDialog and emit
them after closing.
Change-Id: I2de77778a0448db3b87d402e431b8e5f325cbbda
Reviewed-on: https://code.wireshark.org/review/4274
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Plumb signals and slots for changing the text size in the main window.
Remove the bold font code from WiresharkApplication. It was only used in
ByteViewText. Adjust the icons a bit.
Bug: When we change the font preferences the packet list stops drawing
cached strings. I haven't been able to track down the cause.
Change-Id: I609d740c9f26265628fa4b7de1b75b0e56651387
Reviewed-on: https://code.wireshark.org/review/4269
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set the main window icon to the "wsiconcap" version while we're capturing
similar to the GTK+ version. Verified on Windows. Not sure if this will
do anything on other platforms.
Change-Id: I9b082601a2c47e5f52cc38ac8d9b4d9f5fb9a4d9
Reviewed-on: https://code.wireshark.org/review/4230
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The new icons are patterned after the existing capture icons. They could
probably benefit from some adjustments here and there.
Start moving toward icon names and a directory layout compliant with
freedesktop.org's Icon Naming Specification and Icon Theme
Specification. We aren't fully compliant and might never be but anyone
with exposure to FDO icon themes should at least know where everything
is.
Make Capture Start (x-capture-start) the first icon in the toolbar.
Define the Colorize Packets, Auto Scroll, and zoom icons even though the
Qt UI doesn't use them yet.
Leave the Capture Filter, Display Filter, Coloring Rules, Preferences,
and Help icons off for now. The GTK+ toolbar is overly cluttered and I'm
not sure they're necessary.
Try not to break ui/gtk/toolbar_icons.h.
Remove welcome.qrc. I initially added it in case we needed to overlay
the welcome screen with translucent .pngs but that never happened.
To do:
- Move the old GTK+ icons to their own directory.
- Find a better name for the "toolbar" directory. "stock"?
- Make the toolbar configurable.
Change-Id: Ie07592113d307b8db786aedace672312a870fe38
Reviewed-on: https://code.wireshark.org/review/4182
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create a TrafficTableDialog (for lack of a better name) parent class
from the general parts of ConversationDialog. Use it to create
EndpointsDialog.
Move the contents of conversation_tree_widget.{cpp,h} to
conversation_dialog.{cpp,h} to match endpoint_dialog and
traffic_table_dialog.
Fill in GeoIP columns dynamically instead of using a hard-coded limit.
Use "endp_" and "ENDP_" prefixes for a lot of endpoint variables and
defines.
Try to make geoip_db_lookup_ipv4 and geoip_db_lookup_ipv6 more robust.
Clean up some includes. Fix a shadowed variable.
Change-Id: I23054816ac7f8c6edb3b1f01c8536db37ba4122d
Reviewed-on: https://code.wireshark.org/review/3462
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The functionality associated with Capture → Capture Filters, Analyze
→ Display Filters, Analyze → Display Filter Macros, and Analyze →
Apply As Column haven't been implemented yet. Disable each menu item
for now so that we don't play tricks on our users.
Follow our current action naming convention. Rename "Apply as Column"
to "Create a Column".
Change-Id: I01901db05adc897d877f6a0a699e3049b0149b4a
Reviewed-on: https://code.wireshark.org/review/3629
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Even though Qt's widget naming suggests otherwise, a QTreeWidget is
usually a better choice for tables than QTableWidget. The former gives
you a nice, clean Plain Old Table while the latter gives you something
that looks and acts like a spreadsheet.
In this particular instance using QTreeWidget also gives us the option
of adding sub-items with detailed information. Do so for attached
addresses.
Allow sorting by traffic while we're here. Simplify the column hiding
logic. Make sure the sparkline delegate isn't editable.
Change-Id: Ia36ba2e12c1c0cb86ae5b2154e6afcf6549ae049
Reviewed-on: https://code.wireshark.org/review/3466
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Refactor (non-GUI) conversation table functionality from gtk/Qt to epan. Also refactor "common GUI" conversation table functionality.
The idea is to not have to modify the GUI when a dissector adds a new "conversation type"
Change-Id: I11f08d0d7edd631218663ba4b902c4a4c849acda
Reviewed-on: https://code.wireshark.org/review/3113
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "refresh the local interfaces" method to WiresharkApplication,
which reloads the interface list and emits the "interface list changed"
signal, and invoke it from the Capture -> Refresh Interfaces menu item.
Change-Id: I9641e4b341eb44d773c556691d8bb9dac776ea9d
Reviewed-on: https://code.wireshark.org/review/3195
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Items are sorted by value.
Move common conversation code to ui/conversation_hash.[ch]. Add a
conversation_type_e enum along with convenience functions for fetching
titles, tap names, etc.
We have a single main dialog instead of a main dialog + individual
protocol dialogs. It de-clutters the statistics menu and results in
simpler code. Conversation type tabs can be added and removed within the
dialog itself. The tab list is sticky and saved with the current profile
when the dialog closes. Data can be copied as CSV or YAML.
Add a FilterAction class and a corresponding filterAction slot to
MainWindow. Use it for the Conversations context menu.
Add an addressResolutionChanged signal and related plumbing.
Get rid of the iterator members in the conversation item struct. Update
the GTK+ code accordingly.
Excercise for the reader:
- Update TShark to use the common hash code.
Ping-Bug: 9231
Ping-Bug: 8703
Ping-Bug: 6727
Change-Id: I8728d771fc5b1a85937bed9d898e53c3ecc3a544
Reviewed-on: https://code.wireshark.org/review/2987
Reviewed-by: Michael Mann <mmann78@netscape.net>
Trigger dialog creation by passing a method name to
QMetaObject::invokeMethod. I'm not entirely sure this is sane but it
seems to work OK. Move getopt processing further down in the main initialization sequence
to more closely match GTK+ and allow for stat command registration.
Change-Id: I5cd5375fa71dbadac69d528b2ba3bb13598dc3f6
Reviewed-on: https://code.wireshark.org/review/2964
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Some of those routines are used only in dumpcap; others are used in
TShark and Wireshark as well.
Change-Id: I9d92483f2fcff57a7d8b6bf6bdf2870505d19fb7
Reviewed-on: https://code.wireshark.org/review/2841
Reviewed-by: Guy Harris <guy@alum.mit.edu>
- allow to change the interface options in the table
- save the options to preferences when the dialog is left
- add a field for setting a capture filter for all selected interfaces
- add a "Compile BPF" button and a window to show the compiled filter output
- try to address Alexis' and Evan's comments
Change-Id: Ic1272e29183ec80e2d2f4b3e494c79dabe2c3b6f
Reviewed-on: https://code.wireshark.org/review/1946
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
emem was exposed because of its memory limits trying to output PDML for a very large byte field in a capture file.
When converting from proto_construct_match_selected_string to fvalue_to_string_repr remember proto_construct_match_selected_string includes fieldname + value, not just value
bug:10081
Change-Id: I4fc6ea7fd1f63cff410207c8b30562771af40ada
Reviewed-on: https://code.wireshark.org/review/1578
Reviewed-by: Evan Huus <eapache@gmail.com>
It's causing a few different test failures - I've tracked down at least one of them, but the others are weirder and will require more digging.
This reverts commit 9edba650d1.
Change-Id: I897f8cf1cfbb2a189b2054e5002f59757befa47f
Reviewed-on: https://code.wireshark.org/review/1575
Reviewed-by: Evan Huus <eapache@gmail.com>
emem was exposed because of its memory limits trying to output PDML for a very large byte field in a capture file.
bug:10081
Change-Id: I6346dfdfb5f6381e16761a99291c4be7851185d9
Reviewed-on: https://code.wireshark.org/review/1566
Reviewed-by: Anders Broman <a.broman58@gmail.com>
bug:9718
Change-Id: I05330d8a2475ad0d238723d444f3d98bdbd7be39
Reviewed-on: https://code.wireshark.org/review/1041
Reviewed-by: Michael Mann <mmann78@netscape.net>
For each graph you can set:
- Its visibility
- A name
- A display filter
- Color, from a fixed list
- Plot style: Line, Impulse, Bar, Stacked Bar, Dot, Square, Diamond
- Basic Y Axes (packets/s, bytes/s, bits/s)
- Computed Y Axes (SUM, MIN, AVG, MAX)
- Smoothing
You can pan and zoom using the mouse and keyboard. Clicking on a graph
selects the last packet for that interval. If all graphs have the same Y
axis a single label is shown, otherwise a legend is shown.
The time scale (X axis) can be toggled between relative seconds and the
time of day.
Graphs can be saved as PDF, PNG, BMP, and JPEG. Settings are "sticky"
via the io_graphs UAT.
To do:
- Minimize graph drawing delays.
- Figure out why smoothing differs from GTK+
- Everything else at the top of io_graph_dialog.cpp
- Fix empty resets.
A fair amount of code was copied from TCPStreamDialog. We might want to
subclass QCustomPlot and place the shared code there.
Move common syntax checking to SyntaxLineEdit.
Move some common code from ui/gtk/io_stat.c to ui/io_graph_item.[ch] and
use it in both GTK+ and Qt.
Make the io_graph_item_t array allocation in io_stat.c static. The
behavior should be identical and this gives us additional compile-time
checks.
Change-Id: I9a3d544469b7048f0761fdbf7bcf20f44ae76577
Reviewed-on: https://code.wireshark.org/review/435
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
There's a relatively new feature in 1.11.3 to select a specific file format
reader, instead of relying on magics or heuristics. If you select a file
reader and open a file, open it, and then click the reload-file button or go
to View->Reload or press the ctrl-R keymap, the file is reloaded but using the
magic/heuristics again instead of the file format reader you previously chose.
Likewise, the Lua relaod() function has the same issue (which is how I found
this problem).
I have tested this change by hand, using a Lua script, but I didn't add it
to the testsuite because I need another change for my test script to work
correctly. (an enhancement rather than a bug fix, which I'll submit separately)
Change-Id: I48c2d9ea443e37fd9d41be43d6b6cd5a866d5b01
Reviewed-on: https://code.wireshark.org/review/764
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the text descriptions for the two toolbars: "Main Toolbar" and
"Display Filter", so the right-click context menu shows what you're
removing/adding. And add a View->Toolbar sub-menu, with checkable
"Main Toolbar" and "Display Filter" entries, which enable you to
show/hide the toolbars via the menu.
If someone has/prefers better names for these things, I'm all ears.
Change-Id: I55b9fbaed2ef6dca3260fa9dfdddd7dad95d05c4
Reviewed-on: https://code.wireshark.org/review/608
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Rebase with last change and add Logcat export
Change-Id: Idc9b444b1bf14b95ff60e8466e94f7eecd875b47
Reviewed-on: https://code.wireshark.org/review/14
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Now that we have the ability to choose input file format type
in the GUI, we might as well have it in the command-line too.
Plus it would help me in test-stuies if we had a commandline.
So I've added a '-X read_format:Foo' for this. Using just
'-X read_format:', or with a bad name, will make it print out
the full list (in tshark); just like the '-F' does for output
file formats.
Note: I am *not* putting in code for Win32 GUI,
because I can't compile that and I wouldn't have even
done the GTK one if I could compile Qt originally. (I don't think we need
to add any more features to GTK or Win32, just Qt from now on,
right?)
Change-Id: I2fe6481d186f63bd2303b9e591edf397a2e14b64
Reviewed-on: https://code.wireshark.org/review/493
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Fix a modeline while we're at it.
Change-Id: Ief6d5edbe33456170059cfab4f436f0844de32a1
Reviewed-on: https://code.wireshark.org/review/440
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The best heuristic can fail, so add possibility to manually choose
capture file format type, so not correctly recognize file format can be
loaded in Wireshark.
On the other side now it is possible to open capture file
as file format to be dissected.
Change-Id: I5a9f662b32ff7e042f753a92eaaa86c6e41f400a
Reviewed-on: https://code.wireshark.org/review/16
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Evan Huus <eapache@gmail.com>
capture interfaces dialog code, *and* the code that calls it, under
HAVE_LIBPCAP.
Still more stuff to remove from the no-pcap UI, such as the Capture
menu, the capture filter in the main window, and the list of interfaces
in the main window.
svn path=/trunk/; revision=53582
* Reuse sparkline from welcome
* Split settings in tab (!= GTK)
* No all feature work (Work In Progress...)
* ...
Comments (and review) are welcome !
svn path=/trunk/; revision=53563
I may eventually switch this to use proto_* values instead of strings, but just the addition of the loop is more jarring as compared to the simple comparing of ip or ethernet values. But it should lead to a smaller (less protocol specific) packet_info structure.
svn path=/trunk/; revision=53476
Add menu items for each corresponding item in gtk/main_menubar.c that
calls gtk_stats_tree_cb(). Hopefully that's everything. Note that we use
quite a bit less code than the GTK+ flavor and why we might not want to
do that. Change a few things in ui/qt/CMakeLists.txt to more closely
match the GTK+ version. Add plumbing for tap registrations in
CMakeLists.txt and Makefile.am. Add the ability to copy text as CSV or
YAML.
svn path=/trunk/; revision=53464
Collect packet numbers when following streams so that we can correlate
text positions with packets. Add a FollowStreamText class so that we can
track mouse events. Add a hint label that shows the packet under the
cursor along with packet counts and the number of "turns".
Add the packet number to the C array dump. Note that dumping to YAML
might be useful for Scapy users.
svn path=/trunk/; revision=53314
Create a new dialog each time the user follows a stream. A lot of the
follow code seems to assume one and only one dialog so there are likely
outstanding bugs.
Don't use the global cfile (should we deprecate its usage?). We want to
move closer to multiple documents, not further away.
Clean up after ourselves. Free our payload list and unlink our temp
file. Make a bunch of gchar*s QStrings. Make sure our destructor gets
called and use it.
Make member variable and method names more consistent.
svn path=/trunk/; revision=53306
In the current Qt startup sequence the main window + splash screen is
displayed before the main preferences are loaded which means we can't
immediately apply the correct geometry. For now, use an animation to
morph from the default to the saved geometry after the prefs are loaded.
Get rid of main_do_quit() (Qt) and main_window_exit() (Qt+GTK). It looks
like they were unused.
Add wsApp->isInitialized() and use it to see if we should exit() when
the main window is closed. Otherwise we won't shut the application down
and clean up properly.
svn path=/trunk/; revision=52988
Copy common code from ui/gtk/flow_graph.c and ui/gtk/graph_analysis.[ch]
to ui/tap-sequence-analysis.[ch]. Start using the name "sequence" in
places.
svn path=/trunk/; revision=52824
resizable. Get rid of the group box -- the OS X and Windows HIGs
discourage its use and I'm not sure if it fits the GNOME HIG in this
case either. Make the stream contents monospace. Set the cursor to the
beginning of the text when we follow a stream.
Continue the War On Unnecessary Dialogs. Move "Find"ing from a pop-up
window to the main Follow dialog. Wrap back to the beginning as needed.
Add a "Cancel" button. Make sure it and the escape key work as expected.
svn path=/trunk/; revision=52607
Make extra_split_ a member variable again. Make it and master_split_
full-on values. Set various parent/child relationships at startup
so that each widget is associated with a layout (which appears to be
the actual fix).
Make the throttled startup delay huge so that it's easier to browse
using GammaRay.
[1] https://github.com/KDAB/GammaRay
svn path=/trunk/; revision=52386
Scan our segment list (and the capture file) once per stream. Switch the
stream selection control to a QSpinBox. Add graph type selection
actions. The context menu + shortcuts should now be complete. Add the
intitial tcptrace graph. Only ACKs and RWINs so far. A bunch of other
updates and fixes.
svn path=/trunk/; revision=52027
Add TCP/UDP/SSL Follow feature to QtShark
Known issue :
* Duplicate code with GTK (function need follow_info_t struct but in GTK there is some GWidget variable in struct)
* Sometimes TCP Follow fail...
svn path=/trunk/; revision=51883
Rename some methods. Add the ability to toggle time and sequence number
origins. Add more keyboard shortcuts. Comment out abs_secs abs_usecs in
the segment struct since it looks like we aren't using them. Make sure
we stay in the same TCP stream.
svn path=/trunk/; revision=51856
Show the time values in ms instead of s. Add a button and keyboard
shortcut to switch the connection direction. Move more code to
tap-tcp-stream.c. Update our axis labels.
svn path=/trunk/; revision=51832
Make the stream graph dialog modeless and let the user open multiple
instances. The dangling dialog behaves similar to the GTK+ version. Add
a setDissectedCaptureFile signal to MainWindow (currently unused).
Properly transform yAxis2 and simplify resetAxes while we're at it.
Other bug fixes.
svn path=/trunk/; revision=51795
GTK+: Fix what appears to be an off-by-one error in the MA period (21
segments instead of 20). Throw away our initial segment length instead
of subtracting it from the moving sum, which skews the sum.
Qt: Add the througput graph. Use bits/s for the throughput y axis. Let
the user switch between graph types. The dialog hangs when doing this. I
haven't been able to track down the cause. Remove some unused code.
Both: Tell the user that we're using a 20 segment moving average. Move
more routines to tap-tcp-stream.[ch].
svn path=/trunk/; revision=51759
panes, not yet which data goes in which pane).
You currently have to restart for the change to take effect. I also had to move
the preferences-reading (and thus the epan_init) call to before the main window
instantiation so that the preference was actually available for use. This means
that the progress-bar doesn't show up for very long any more, since most of the
work is already done by the time it appears.
I'm sure there is a way to delay just the layout setup until later, but I kept
getting slot errors I couldn't figure out...
svn path=/trunk/; revision=51647
QCustomPlot data sets are made up of keys (x axis by default) and values
(y axis). It looks like we can have multiple values for a given key
(i.e. we can show multiple sequence numbers for a given timestamp) but
QCPItemTracers can only be positioned by a key and not a key+value pair.
This makes our graph selection behavior a bit different compared to the
GTK+ version. We can only select one segment for a give timestamp but
our selection targets are much larger (the height of the graph).
Add a map for segment data so we don't have to iterate to find them. Use
UTF8_RIGHTWARDS_ARROW where appropriate. Set a window title. Tell the
user what will happen if he or she clicks. Disable graph selection.
svn path=/trunk/; revision=51604
Add the QCustomPlot widget. Thanks to Emanuel Eichhammer for granting a
license change. Move some common code from ui/gtk/tcp_graph.c to
ui/tap-tcp-stream.[ch]. Get rid of tcp_graph_selected_packet_enabled().
It was only used in the menu code and didn't match what we were doing
elsewhere.
Still quite a bit of work to do but it's a promising start.
svn path=/trunk/; revision=51538
Add CaptureFilterCombo and CaptureFilterEdit classes, similar to their
display filter counterparts. Add a CaptureFilterSyntaxWorker class which
runs a syntax check in a background thread similar to the threaded code
in capture_dlg.c. Add a bunch of related signal and slot plumbing. Other
minor fixups.
svn path=/trunk/; revision=51200
actionEditConfigurationProfiles. This keeps it from being converted to
the default preferences item on OS X.
Remove a hack where we stored the text for
actionEditConfigurationProfiles in its iconText in order to keep it from
clobbering actionEditPreferences. It doesn't seem to be necessary.
svn path=/trunk/; revision=50636
Add Summary Statistics to qtshark (Statistics => Summary)
Now, use tabs to split summary display (File Capture details, Capture Statistics)
Add also Comment Summary tab (to replace Statistics => Comments Summary)
From me :
Fix order of summary files in Qtshark.pro
svn path=/trunk/; revision=50470
Gerald Combs