-List MP_OPT as a subtree with relevant MP_SEQ, ID Address and/or subflow.
-Fixed a compilation warning due to an except statement creating subtree for an inexistent tree.
Previous implementation lacked MP_ADDADDR, MP_REMOVEADDR and had an outdated version of MP_PRIO.
Fixed a bug where the dissector had an incorrect offset of 1 byte, resulting in it incorrectly reading headers and data, something resulting in malformed packets.
Instead of having the UI have to know about each type of follow
stream, and how to retrieve its total number of streams, have
each follow type register a function that returns the total
number of stream. (The function can be NULL, for protocols like
SIP that do not use this.)
This gets us closer to making follow stream registration generic.
A conversation in Wireshark might have two endpoints or might have no
endpoints; few if any have one endpoint. Distinguish between
conversations and endpoints.
The "conversation table" mechanism supports two types of tables, one for
the "Conversations" menu item under "Statistics" and one for the
"Endpoints" menu item under "Statistics". The first of them shows
statistics for conversations at various layers of the networking stack;
the second of them shows statistics for endpoints at various layers of
the networking stack.
The latter is *not* a table of hosts; an endpoint might be a host,
identified by an address at some network level (MAC, IP, etc.), or it
might be a port on a host, identified by an address/port pair.
Some data types, function names, etc. use "host" or "hostlist" or other
terms that imply that an endpoint is a host; change them to speak of
endpoints rather than hosts, using names similar to the corresponding
functions for conversations.
Provide wrapper functions and typedefs for backwards source and binary
compatibility; mark them as deprecated in favor of the new names.
Clean up some comment errors found in the process.
The TCP and UDP follow conversation filter functions should
only retrieve a conversation and conversation data, not
create new conversations or new stream numbers. (That should
only happen during actual packet processing.) So they should
match on the endpoint type and not look up endpoints (since
TCP and UDP don't use the endpoint API.)
They still don't work with tunneling, or any other situation where
the addresses and ports have been changed (see #18231), but this
at least works when some other protocol _has_ used the endpoint
API, and also avoids creating nonsensical streams.
Making them work properly with tunneling either requires adding
packet info to each packet with the stream information, or using
the endpoint API (after finishing it to allow more than one endpoint
on the packet, and a way of searching for endpoints other than
the most recent.)
Changes:
- epan/follow.c: follow_conv_filter_func has new parameter
epan_dissect_t *edt, so filter can be generated based on decoded tree
of packet below the cursor
- menu Follow/SIP Call is enabled when sip packet is selected
- value of sip.Call-ID is used as filter for SIP call
- for sharkd it generates filter just 'sip.Call-ID' with no value
This pull request includes:
* The "Follow DCCP stream" feature.
* Updated docbook documentation for the "Follow DCCP stream" feature.
* Test for the feature.
* Corresponding packet trace for the test.
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, we don't need a chunk of code in epan/prefs.c that knows about
various preference module mappings; individual dissectors can register
aliases as appropriate.
(The Nortel Discovery Protocol never *had* any preferences, even when
it was the SynOptics Network Management Protocol, so there's no need for
it to register an alias.)
Change-Id: I4a718dac6bb06801cc06a6ee5a28d7ed81e67e5d
Reviewed-on: https://code.wireshark.org/review/29914
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When a single UDP port is supporting multiple protocols, for example RTP and
RTCP can share a port, and one of these protocols is detected through a
heuristic before a superior protocol (e.g. SIP/SDP) has established that the
port has multiple protocols, then only the heuristic is used. This is due to
only looking for an exact match with find_conversation() and not going any
further. The superior protocol only adds the dissector by source address/port.
So, to fix, if we do not find the exact match, we continue serching for a
dissector on the partial matches.
Bug: 14370
Change-Id: Icdded9ca1637cd594b920f979f6f0a003bef9aae
Reviewed-on: https://code.wireshark.org/review/25432
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
For the moment this mirrors the port_type enumeration (PT_XXX), but the
intent is to move away from using "port types", eliminating most (if not
all)
Added conversation_pt_to_endpoint_type() so that conversations deal with the
correct enumeration. This is for dissector that use pinfo->ptype as input
to conversation APIs. Explicit use of port types are converted to using
ENDPOINT_XXX type.
Change-Id: Ia0bf553a3943b702c921f185407e03ce93ebf0ef
Reviewed-on: https://code.wireshark.org/review/24166
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Use the tvb_get_ntohXXX instead.
Change-Id: I8d5c6ac2f2c8b1ac9237297f06709513fc2c9113
Reviewed-on: https://code.wireshark.org/review/21733
Reviewed-by: Michael Mann <mmann78@netscape.net>
found by lintian
Change-Id: I50907b9721f3941c291cf322916f553ab3b4b168
Reviewed-on: https://code.wireshark.org/review/20638
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Several calls to proto_tree_add_uint_format_value could be better served
using BASE_UNIT_STRING with a "unit string" in hf_ field. There also
a few cases where proto_tree_add_uint_format_value could just be
proto_tree_add_uint.
Added a few more "common" unit string values to unit_strings.[ch]
Change-Id: Iaedff82c515269c9c31ab9100dff19f5563c932d
Reviewed-on: https://code.wireshark.org/review/19242
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Have all dissector tables have a "supports Decode As" flag, which
defaults to FALSE, and which is set to TRUE if a register_decode_as()
refers to it.
When adding a dissector to a dissector table with a given key, only add
it for Decode As if the dissector table supports it.
For non-FT_STRING dissector tables, always check for multiple entries
for the same protocol with different dissectors, and report an error if
we found them.
This means there's no need for the creator of a dissector table to
specify whether duplicates of that sort should be allowed - we always do
the check when registering something for "Decode As" (in a non-FT_STRING
dissector table), and just don't bother registering anything for "Decode
As" if the dissector table doesn't support "Decode As", so there's no
check done for those dissector tables.
Change-Id: I4a1fdea3bddc2af27a65cfbca23edc99b26c0eed
Reviewed-on: https://code.wireshark.org/review/17402
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Fill in the "gaps" so that all dissectors that verify checksums have both a
status and expert info field.
Also address comments from original proto_tree_add_checksum patch that didn't make it.
Ping-Bug: 8859
Change-Id: I2e6640108fd6bb218cb959fe9e4ba98a13e43a2f
Reviewed-on: https://code.wireshark.org/review/16590
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This is an attempt to standardize display/handling of checksum fields for all dissectors.
The main target is for dissectors that do validation, but dissectors that just report the
checksum were also included just to make them easier to find in the future.
Bug: 10620
Bug: 12058
Ping-Bug: 8859
Change-Id: Ia8abd86e42eaf8ed50de6b173409e914b17993bf
Reviewed-on: https://code.wireshark.org/review/16380
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This saves many dissectors the need to find the data dissector and store a handle to it.
There were also some that were finding it, but not using it.
For others this was the only reason for their handoff function, so it could be eliminated.
Change-Id: I5d3f951ee1daa3d30c060d21bd12bbc881a8027b
Reviewed-on: https://code.wireshark.org/review/14530
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This will make it easier to determine protocol dependencies.
Some LLC OUI dissector tables didn't have an associated protocol, so they were left without one (-1 used)
Change-Id: I6339f16476510ef3f393d6fb5d8946419bfb4b7d
Reviewed-on: https://code.wireshark.org/review/14446
Reviewed-by: Michael Mann <mmann78@netscape.net>
Some of the ASN.1 dissectors still generate a new_create_dissector_handle from the tool itself, so leave those for now.
Change-Id: Ic6e5803b1444d7ac24070949f5fd557909a5641f
Reviewed-on: https://code.wireshark.org/review/12484
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Having a single function call to format source-destination port column info serves the
current (and presently only) use case better by having a single place to manage the
display format.
This commit does not introduce any actual formatting changes.
Change-Id: I1d479d0fd5690d12afb47e538057fdc2dd369ca2
Reviewed-on: https://code.wireshark.org/review/11539
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The target here is the Decode As dialog where protocols have multiple registrations into a dissector table and that shows up as multiple entries in the Decode As dialog list with the same name so users are unsure which "dissector" they are choosing.
The "default" behavior (done in this commit) is to not allow duplicates for a dissector table, whether its part of Decode As or not. It's just ENFORCED for Decode As.
Bug: 3949
Change-Id: Ibe14fa61aaeca0881f9cc39b78799e314b5e8127
Reviewed-on: https://code.wireshark.org/review/11405
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It ends up dragging in libwireshark headers, which programs not linking
with libwireshark shouldn't do. In particular, including
<epan/address.h> causes some functions that refer to libwireshark
functions to be defined if the compiler doesn't handle "static inline"
the way GCC does, and you end up requiring libwireshark even though you
shouldn't require it.
Move plurality() to wsutil/str_util.h, so that non-libwireshark code can
get it without include epan/packet.h. Fix includes as necessary.
Change-Id: Ie4819719da4c2b349f61445112aa419e99b977d3
Reviewed-on: https://code.wireshark.org/review/11545
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Replace CMP_ADDRESS, COPY_ADDRESS, et al with their lower-case
equivalents in the asn1 and epan directories.
Change-Id: I4043b0931d4353d60cffbd829e30269eb8d08cf4
Reviewed-on: https://code.wireshark.org/review/11200
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Not all systems support this glyph
Change-Id: I99784101b4d462991351554e44a5618bfea42a84
Reviewed-on: https://code.wireshark.org/review/11063
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Don't display duplicate ports if transport name resolution is not
enabled (for UDP/TCP/DCCP).
Also introduce col_append_port() to handle info column port display
with name resolution in a uniform format.
Change-Id: Icb8ac45f726b7c539b4534c62061473e9b582753
Reviewed-on: https://code.wireshark.org/review/10804
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Avoid displaying duplicate port numbers with transport name resolution disabled and
make some dissector code simpler.
Introduces port_with_resolution_to_str_buf() function and amends UDP/TCP/DCCP/SCTP to
use the new field display type.
Change-Id: Ifb97810b9c669ccbb1a310a2c0ffd6e2b63af210
Reviewed-on: https://code.wireshark.org/review/10625
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Ia6b62fae76ae76a2859ec47229e1c299bddb5a31
Reviewed-on: https://code.wireshark.org/review/8749
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
GREGORIO-M