Change directory to the source tree before invoking `git shortlog`,
otherwise it fails on build directories outside the source tree.
Alexis suggested to move the git invocation to the perl script, this is
done now and also avoids writing AUTHORS.git in the source tree.
Change-Id: I5905ebf40d8d32a586c88671b52f28c542ca33ba
Reviewed-on: https://code.wireshark.org/review/14660
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add SOCKET_LIBS and NSL_LIBS to global LIBS variables on platforms
where it is required.
Make configure checks for getaddrinfo/gethostname unconditional,
that is handled with #ifdefs if necessary.
Change-Id: Ia874038454fb9cf3bdbf8e6fd829f319e331837e
Reviewed-on: https://code.wireshark.org/review/14560
Reviewed-by: João Valverde <j@v6e.pt>
Ciscodump is a new extcap that allows packet capture
on Cisco routers (IOS 12.4 and later) through SSH.
Change-Id: Ic9c5be01d3bd0112116f7fc9fa10e26c1552b007
Reviewed-on: https://code.wireshark.org/review/13886
Reviewed-by: Roland Knall <rknall@gmail.com>
Using cmake -DENABLE_EXTCAP=no or ./configure --without-extcap.
Some documentation fixes too.
Change-Id: Iebf9c843d67e10a32de1a62904de8f88b872ec99
Reviewed-on: https://code.wireshark.org/review/14522
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Add FOLDER properties to targets to clean up the presentation
in Visual Studio.
Change-Id: I35a175175db055443572c58a069879061fdcf0a3
Reviewed-on: https://code.wireshark.org/review/14528
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Set ENABLE_CHECK_FILTER to 1 for get list of display filter with conflict...
Ping-Bug:2402
Change-Id: I8d56b1573120d1a29d437aae1088be242e15e9a3
Reviewed-on: https://code.wireshark.org/review/13644
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Dump the output of `git shortlog` directly to AUTHORS.git instead of
piping it through `cut`. Depending on our toolchain, cmake COMMANDs might
not support pipes. This appears to be the case for MSBuild. Removing the
`cut` command has the added benefit of reducing our dependency on Cygwin.
Pass HEAD to `git shortlog`, otherwise it doesn't return anything when
run under MSBuild.
Change-Id: I23e9436c007d76a700bbbc45c2772c8aba6d5749
Reviewed-on: https://code.wireshark.org/review/14349
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This new function abstracts the creation of a list of the local
interfaces that will be used by future extcaps to generate specific
filters. Sshdump now uses it to create a pcap filter.
Change-Id: I5b75a266f81104b3c9bcb3e51de246b7cc8785ce
Reviewed-on: https://code.wireshark.org/review/14092
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
new AUTHORS file can be created with "gen-authors" build parameter
The "original" AUTHORS file has been fixed up to be kind to parsers (so no one gets excluded) and renamed to AUTHORS.src. This preserves the features authors worked on. For authors that didn't list features, they may be converted to just getting information from git.
Change-Id: I9a4c4091e229f7f5e1c46d864527a98c1278e451
Reviewed-on: https://code.wireshark.org/review/14231
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Smaller epan/CMakeLists.txt is easier to work with and this structure
is well suited to CMake. It should make it easier to manage and configure
each epan module differently if necessary.
Change-Id: Ia649db3b7dcd405aa43dbdba3288699d5e375229
Reviewed-on: https://code.wireshark.org/review/14068
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Also add the extcap-version parameter to enable parsing of
version and helppage separately
Change-Id: I35ba5aa992940ffbb0cd9ebea8b7c3a1e8629d74
Reviewed-on: https://code.wireshark.org/review/14094
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
If you include something from the wiretap directory, always precede it
with wiretap/.
Fix some includes of files in the top-level directory to use a path
relative to the current directory, not relative to the wiretap
directory.
This makes it a bit clearer what's being included.
Change-Id: Ib99655a13c6006cf6c3112e9d4db6f47df9aff54
Reviewed-on: https://code.wireshark.org/review/13990
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That lets the version of Wireshark built with autotools find the extcap
programs.
Don't install the extcap programs under ${datadir} - that puts it under
a share directory, and share directories are for platform-independent
files, which executable images aren't (they're instruction-set
dependent, hence platform-dependent).
Change-Id: I992eeb984bdbe6b3476777f7114628c83df6080f
Reviewed-on: https://code.wireshark.org/review/13943
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Fixes dpkg warnings:
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/wireshark-qt/usr/bin/wireshark was not linked against libsbc.so.1 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/wireshark-gtk/usr/bin/wireshark-gtk was not linked against libsbc.so.1 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: symbol sbc_decode used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sbc_init used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sin used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol floorf used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol floor used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sbc_finish used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
Change-Id: I71911513c348edd336cdc82ea358b6a05760b4b9
Reviewed-on: https://code.wireshark.org/review/13784
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
In CMake and Autotools, warn the user when neither c-ares nor ADNS is
present. Note that we might want to make asynchronous DNS a requirement.
Change-Id: Ia9cce56cc2286cdc72303fc1410f899f9c320d84
Reviewed-on: https://code.wireshark.org/review/13080
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move ui/filters.[ch] to filter_files.[ch] because dumpcap is using functionality.
Bug: 8091
Change-Id: I195c82fc023f97d6f331b8718c45a2d83d30faea
Reviewed-on: https://code.wireshark.org/review/5925
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This change allows make-version.pl to run correctly on Windows
without having the git binary dir in PATH. This prevents problems when
installing "Git for Windows" with default settings (git only available
via the bundled shell (bash).
Details:
* Add Git to the list of packages to be looked up by CMake.
* If Git is found by CMake, pass the full path to make-version.pl
* make-version.pl: Test whether git is available, and display a warning if git is missing.
On Unix-type systems this should have no impact.
Tested on Windows Server 2012 R2 and Ubuntu 15.04.
Change-Id: I7f7be2035c262658801586cb24c82b912848e31d
Reviewed-on: https://code.wireshark.org/review/13111
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Have CHECK_C_LINKER_FLAG pass /WX to the linker if we're using MSVC, to
force the link to fail if the linker doesn't recognize the flag.
Add flags to WIRESHARK_LD_FLAGS even with MSVC; let CHECK_C_LINKER_FLAG
figure out whether the flag should be used.
While we're at it, fix CHECK_C_LINKER_FLAG to save and restore
CMAKE_REQUIRED_LIBRARIES.
Change-Id: I7f73b4cc3a28eb14e46c2e1e9ad69f5303754f01
Reviewed-on: https://code.wireshark.org/review/13558
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
So far the plugindir variable in the pkg-config file is set like
this:
set( plugindir "\${libdir}/${PLUGIN_INSTALL_DIR}" )
where libdir is set to:
set( libdir "\${exec_prefix}/${CMAKE_INSTALL_LIBDIR}" )
However, PLUGIN_INSTALL_DIR already contains
CMAKE_INSTALL_LIBDIR:
set(PLUGIN_INSTALL_DIR "${CMAKE_INSTALL_LIBDIR}/\
${CPACK_PACKAGE_NAME}/plugins/${CPACK_PACKAGE_VERSION}")
Therefore, if the pkg-config file is generated by cmake, the
resulting plugindir points to:
plugindir=${libdir}/lib/wireshark/plugins/2.1.0
libdir=${exec_prefix}/lib
This is obviously wrong as after variable substitution the
resulting path is /usr/lib/lib/wireshark/plugins/...
Change-Id: I448991284d8948434311b1c0828828fd93d0baf8
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-on: https://code.wireshark.org/review/13258
Tested-by: João Valverde <j@v6e.pt>
Reviewed-by: João Valverde <j@v6e.pt>
Fix
CMake Warning (dev) in CMakeLists.txt:
A logical block opening on the line
C:/Development/wireshark-w64/CMakeLists.txt:1649 (if)
closes on the line
C:/Development/wireshark-w64/CMakeLists.txt:1668 (endif)
with mis-matching arguments.
This warning is for project developers. Use -Wno-dev to suppress it.
Change-Id: I6b6060e4d88b385deb81111234e3229d104772f1
Reviewed-on: https://code.wireshark.org/review/13407
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Avoid build fail if found Lua but it is disabled.
Change-Id: If1cf0d650454d2844a1430135de1385c984e5ba4
Reviewed-on: https://code.wireshark.org/review/13394
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Firstly, when building with autogen.sh and configure script, the
wireshark.pc is not generated at all. Then, due to not matching
names some variables are not being replaced as they should be.
Bug: 11069
Change-Id: Iefa7a9b536f3fee7f9ad78803aaacc5bb64a9c8d
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-on: https://code.wireshark.org/review/13005
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The glob pattern should not catch the generated faq.txt file. Fix this
by explicitly listing all source .txt files.
Bug: 11896
Change-Id: I3904a0e094b5dba3808dacaaabd4db298a8f14cb
Reviewed-on: https://code.wireshark.org/review/12930
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
This also moved color.h into color_filters.h
Change-Id: Ic19e27aa1b3ec67e764aa7ee8bbef7b1187bb12e
Reviewed-on: https://code.wireshark.org/review/12831
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This new extcap is for testing and educational purpose.
It relies on rankpkt-core functions to generate random packets.
Change-Id: If6890f0673545682995a2079458108edc0913b30
Reviewed-on: https://code.wireshark.org/review/11764
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The "-Wwrite-strings" flag produces nuisance warnings. These warnings are
not useful, they're impossible to fix in a sane way and therefore are being
handled with casts of static strings to (char *).
This just moves the warning to [-Wcast-qual] and a compiler pragma is
in turn required (and used) to squelch that warning.
Remove the Wwrite-strings warning. Let that responsibility fall on the
programmer (as is done by casting).
Change-Id: I5a44dfd9decd6d80797a521a3373593074962fb5
Reviewed-on: https://code.wireshark.org/review/12162
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This reverts commit b56f53884b.
Sadly, we *do* get warnings at this point with older versions of Flex,
such as the one on the 32-bit OS X buildbot.
Change-Id: I9aec1a16e9f2e1bbcfaac3dffdabdd89af5815e3
Reviewed-on: https://code.wireshark.org/review/12443
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We shouldn't be getting warnings at this point.
Change-Id: I363a48546cb8d916425f42962ae1697d52ed9a29
Reviewed-on: https://code.wireshark.org/review/12436
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Move the code that finds the Visual C++ redistributable DLLs to its
own module. Run it before we create our NSIS and PortableApps targets.
Add a PortableApps target that copies the redistributable
This reverts commit 403fa9fbe0cdba3f443ec4674cda40092525ffe4.
Bug: 11800
Change-Id: I081d8fd3f5f37dd590659ca8f2bd309642a9a9df
Reviewed-on: https://code.wireshark.org/review/12431
Reviewed-by: Gerald Combs <gerald@wireshark.org>
(cherry picked from commit 5b580834aeeee8477039bc099c49c21aeeb3b71f)
Reviewed-on: https://code.wireshark.org/review/12432
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
This fix was accidentally reverted in d6da952. Tested with CMake
2.8.12.2 and 3.3.2.
Change-Id: I05312eb9ec18be88be6155edb1ced67ea2ee2bba
Reviewed-on: https://code.wireshark.org/review/12301
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
It is misleading to print RelWithDebInfo flags if I am using Debug.
Change-Id: I575d5c950cbe9d59852799c28fd88426f20cdaab
Reviewed-on: https://code.wireshark.org/review/12133
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Ensure that files from INSTALL_FILES depend on html_docs, not the parent
target copy_data_files (that would not help at all). Ensure that lua
scripts are generated before copying them (another moved dependency).
Explicitly track the help files that have to be textified for Windows
(this finalizes the addition of proper dependencies to copy_data_files
targets).
Since there is no compelling reason for the extra
copy_data_files_depends target now, remove it and move copy_data_files a
bit further in the file such that the dependencies can be set.
While at it, remove the unnecessary make_directory, the copy_data_files
target will create it automatically when copying a file into it.
Should fix the problem reported at https://code.wireshark.org/review/12028
Change-Id: I81e56c93ac0fc85e7385605b9c780a80b3d43c85
Reviewed-on: https://code.wireshark.org/review/12130
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Original problem: run/radius/ (and other files) would continuously be
copied over because the "copy_directory" command is always invoked,
resulting in a newer timestamp (observable via rsync output).
Fix 1: convert from "copy_directory" to copying individual files
(matched via a glob pattern).
Fix 2: add DEPENDS information to the commands, ensuring that the
copy commands are only invoked when the file is actually newer.
(copy_if_different does not respect timestamp, so use plain copy.)
Other visible changes:
- radius/Custom.make (automake thingey) is not copied anymore because
an explicit list is used with glob patterns.
- Removed comment about "default.tt" (gone since
v1.99.0-rc1-1684-g07b003a, Makefile.nmake is still untouched though).
Due to fix 1, the number of processes increase by about 300. Due to fix
2 however, less processes are executed for repetitive runs. This is
visible in the following build time comparison:
patch/generator cmake build1 build2 clean
before/make 24.86 152.73 3.46 1.04
after/make 24.78 153.08 3.40 1.03
before/ninja 22.99 141.68 0.64 0.24
after/ninja 22.89 141.66 0.10 0.25
cmake is "cmake -DCMAKE_BUILD_TYPE=None -GNinja" (-G"Unix Makefiles");
build1 is invocation of "make -j10"/"ninja" on v2.1.0rc0-668-g94b9907;
build2 is the second invocation with this patch;
clean is "make clean" or "ninja clean".
Numbers are in seconds over 3 runs. This patch has no significant
performance impact for the first build, but the second run has improved
because the more efficient Ninja generator executes less processes.
Change-Id: I7b62556393520044aaaad17dafb82ac137ae73bb
Reviewed-on: https://code.wireshark.org/review/12028
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I14089fbdafa00280ff7b3148c2e0a880b925958e
Reviewed-on: https://code.wireshark.org/review/11872
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The path may contain a space (it does on my Windows 7 VM), so quote it
in the PowerShell command.
Change-Id: Ib130991b8c29cb327832f2fe51cb37828526448b
Reviewed-on: https://code.wireshark.org/review/12041
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The hardening check runs on all binaries and quite a few third party binaries
are not hardened, thus leading to a warning on the buildslave.
The change reduces the noise by not counting the binaries that are known to be
"soft". They are still printed in the output though, for reference.
Also fixed the search directory passed to the script.
Change-Id: I1619066c687c9ba934ab38fccbbf2011108328e4
Reviewed-on: https://code.wireshark.org/review/12016
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Graham Bloice <graham.bloice@trihedral.com>
sshdump is an extcap module that allows dumping from a remote host using an ssh connection.
It goes with the existing extcap plugin interface.
Change-Id: I8987614fdd817b8173a50130812bc643a4833bca
Reviewed-on: https://code.wireshark.org/review/11402
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
...otherwise we won't copy it to ${CMAKE_BINARY_DIR}/run/Wireshark.app on
OS X, which means our flag icons won't be displayed.
Bug: 11697
Change-Id: I26cd6a2dd13be35f9a80fd93adc8248848df5978
Reviewed-on: https://code.wireshark.org/review/11923
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Some compiler flags may not be passed twice (such as -mllvm
-msan-keep-going), so avoid duplicating CMAKE_C(XX)_FLAGS.
When -DCMAKE_BUILD_TYPE=<type> is set, you can override the default
optimization and debug flags with -DCMAKE_C_FLAGS_<type>=....
This reverts commit 15a238a28d.
Change-Id: I4e1cf11c49eaf00ad4a2c430454a127b4be20d9e
Reviewed-on: https://code.wireshark.org/review/11597
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The current version of the fix only adds -fPIC under certain
circumstances; we check whether it was added and, if it was, and those
circumstances are *not* in effect, we remove it.
Bug: 11643
Change-Id: I75d0ff9b4781d7d4cd884a29bbce7d392939315c
Reviewed-on: https://code.wireshark.org/review/11849
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This allows displaying the WinPcap version in about dialog
Change-Id: Ic3f4256d81db68314a158fc55682dfd9dbf799a0
Reviewed-on: https://code.wireshark.org/review/11726
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This will allow other apps to use the random packet generation
features.
Change-Id: I7e9af58cbe39da4908242b5fbb292f473e03b4f2
Reviewed-on: https://code.wireshark.org/review/11579
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It is no longer supported on El Capitan's clang, which was causing my
cmake/osx/qt build to fail with:
clang: error: optimization flag '-fno-delete-null-pointer-checks' is not
supported
Change-Id: Idfac336758cdea9a34446d8281cd237ad3ee6823
Reviewed-on: https://code.wireshark.org/review/11571
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
The version of CMake I use (3.2.2) failed to parse the
CMakeLists.txt
Change-Id: I146c5a5ba8cd6fa6236b53039a31cc085bf5b460
Reviewed-on: https://code.wireshark.org/review/11392
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
CMake sets CMAKE_CL_64 if we're using a 64-bit version of Visual Studio.
Use it.
Change-Id: I04595a0e703e39e428d853a506472f3881672a35
Reviewed-on: https://code.wireshark.org/review/11376
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Since v2.1.0rc0-17-g877fd03 and v2.0.0rc0-23-g263ff53 ("ssl-utils:
load RSA keys based on their modulus+exponent"), GnuTLS 2.12.0 is
needed.
Add a version check to cmake as well, tested on CentOS6 (with
pkg-config check disabled to verify the code path). Note that RHEL6
has GnuTLS 2.8.5 and thus SSL decryption with a RSA private key is no
longer supported on that version.
Change-Id: I99fdfe6790107f48629dd435794fe8880263063d
Reviewed-on: https://code.wireshark.org/review/11044
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Fixes building on Ubuntu 12.04 x86_64 which has cmake 2.8.7.
Bug: 11617
Change-Id: I253e9fda698d4b963d50516e483d8243231f056b
Reviewed-on: https://code.wireshark.org/review/11193
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
libgcrypt 1.4.2 is required since since v1.11.0-rc1-2787-g23f9100
("Really add support for AEAD ciphers (GCM)") due to the use of
gcry_cipher_setctr. Bump the version in configure.ac too.
Add version check for gcrypt to cmake. Tested with CentOS 6 (cmake
2.8.12.2, libgcrypt 1.4.5).
Change-Id: I93c3ed902a764d9d14675779e866230d073c96d5
Reviewed-on: https://code.wireshark.org/review/11043
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Or, at least, undo the unconditional addition of -fPIC to
Qt5Widgets_EXECUTABLE_COMPILE_FLAGS, and add it back only if we need it
to compile a small test program that includes <QtCore>.
-fPIC still shows up for other reasons; perhaps we need to undo other
unconditional operations "helpfully" done by Qt5CoreConfigExtras.cmake.
Change-Id: I76c1b01b3dce7398e4115552bc4ff87bc775e027
Reviewed-on: https://code.wireshark.org/review/11079
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add "/WX" to the Visual C++ compiler flags if DISABLE_WERROR is off,
similar to config.nmake.
We haven't compiled C++ code with -Wshorten-64-to-32 for quite
some time so there's no need to add -Wno-shorten-64-to-32 in
ui/qt/CMakeLists.txt.
Additionally, squelch
----
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3050) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3065) : see reference to function template instantiation 'void std::_Median<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3127) : see reference to function template instantiation 'std::pair<_RanIt,_RanIt> std::_Unguarded_partition<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3157) : see reference to function template instantiation 'void std::_Sort<_Iter,int,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Diff,_Pr)' being compiled
with
[
_Iter=QList<QString>::iterator
, _RanIt=QList<QString>::iterator
, _Diff=int
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
.\rpc_service_response_time_dialog.cpp(130) : see reference to function template instantiation 'void std::sort<QList<QString>::iterator,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3051) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3052) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3053) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
----
in both rpc_service_response_time_dialog.cpp and wireshark_application.cpp
so that we'll compile successfully.
Change-Id: I457bcede99dcb1f3c1001f1f559c4901bb000357
Reviewed-on: https://code.wireshark.org/review/10533
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Try to find Python and set PYTHON_EXECUTABLE on Windows via the registry
prior to calling FindPythonInterp. This works around a bug in CMake that
prefers Cygwin's Python, which is a symlink, which by default is a text
file that contains a Cygwin-specific cookie, which is therefore useless
outside of Cygwin.
This is avoids the need to pass -DPYTHON_EXECUTABLE=... to CMake.
Change-Id: Ife37221b61d920682c20357b6d139a93067a5ad1
Reviewed-on: https://code.wireshark.org/review/11071
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This reverts commit 222de975c4.
I realized how to do it with a compile test.
Change-Id: I9468c50777e387c572f60411ca39ea86ba6ce520
Reviewed-on: https://code.wireshark.org/review/11078
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit 6bdfa95a1e.
Next I'll revert my change, as I realized how I *can* do it with a compile test, instead.
Change-Id: I75335ef4522af23340fdc9e5d68634cb5a5835d8
Reviewed-on: https://code.wireshark.org/review/11077
Reviewed-by: Guy Harris <guy@alum.mit.edu>
There are other compilers that won't like it or even that may not like
it.
Change-Id: I0d50e4217994bc930914c0fbcf1c5d2fc18a0e3a
Reviewed-on: https://code.wireshark.org/review/11072
Reviewed-by: Guy Harris <guy@alum.mit.edu>
On Debian Wheezy, the cmake build would fail with:
/usr/bin/ld: CMakeFiles/wsutil.dir/privileges.c.o: relocation
R_X86_64_PC32 against symbol `started_with_special_privs' can not be
used when making a shared object; recompile with -fPIC
Issue was introduced with v1.99.10rc0-222-g3fb1d68 ("cmake: Enable PIE
when it is available by default").
Bug: 11587
Change-Id: I62eec8d1db020128eeeb77b38e3316abf71e6e6a
Reviewed-on: https://code.wireshark.org/review/10916
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
"argument unused during compilation" warnings suggest that some options
do not make sense (such as passing the -gsplit-dwarf option to the
linking command while it is only valid during compilation).
For now we do not care about these warnings, the option is accepted by
clang and whether it used in a particular step or not is uninteresting.
Change-Id: I3b6efa0dccd33c7f351c5938a29adef64ac1706d
Reviewed-on: https://code.wireshark.org/review/10893
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
A build with the gold linker broke with:
run/libwireshark.so.0.0.0: error: undefined reference to 'krb5_c_decrypt'
Fix this my restructuring the FindKERBEROS module to use the libraries
found by pkg-config.
While at it, check for MIT and Heimdal instead of assuming MIT. Remove
HAVE_KEYTYPE_ARCFOUR_56 as this macro is not used.
Change-Id: Iab23d79bc3f25e9c0fd7203b6f050f875fb4a2b5
Reviewed-on: https://code.wireshark.org/review/10907
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
I give up. I don't know whether this all means our build mechanism is
too fragile, our code is to fragile, autotools are too fragile, the
compilers we're using are too fragile, Qt is too fragile, or C++ is too
fragile, but if the build breaks that easily, maybe we should just give
up on Leopard.
Change-Id: If700d928da95d09ed5173b976261e4ddd236d654
Reviewed-on: https://code.wireshark.org/review/10946
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Try to figure out why CMake builds work on the 32-bit OS X buildbot but
autotools builds don't; either the compiler commands are different in
ways that break the autotools build, or the config.h files are different
in ways that break the autotools build, or magic pixies affect the
builds in different ways that only break the autotools build.
Change-Id: Id24bad04ff8ef755e4966e28fd445c2ab05c6913
Reviewed-on: https://code.wireshark.org/review/10931
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Remove variadic macros restriction (c99, c++11 feature) from
README.developer. GCC, Clang, MSVC 2005 all support it.
Enable -Wno-variadic-macros in configure.ac and CMakeLists.txt when
-Wpedantic is enabled (which would enable -Wvariadic-macros).
For all files matching 'define\s*\w+[0-9]\(', replace "FOO[0-9]" by
"FOO" and adjust the macro definition accordingly. The nbap dissector
was regenerated after adjusting its template and .cnf file. The
generated code is the same since all files disabled the debug macros.
Discussed at:
https://www.wireshark.org/lists/wireshark-dev/201209/msg00142.htmlhttps://www.wireshark.org/lists/wireshark-dev/201510/msg00012.html
Change-Id: I3b2e22487db817cbbaac774a592669a4f44314b2
Reviewed-on: https://code.wireshark.org/review/10781
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This doesn't appear to fix the issue unfortunately.
This reverts commit fd5eafa50a.
Change-Id: Ida25881fca0a667c7d47692465b8f1fc9d335697
Reviewed-on: https://code.wireshark.org/review/10753
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We don't have Wireshark.pkgproj so don't try to copy it.
Change-Id: I649fce27e53cbd45ffc50e4095252a665c49165d
Reviewed-on: https://code.wireshark.org/review/10739
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We've been using QElapsedTimer for a while now with no complaints. It
was introduced in Qt 4.7, which was first released in September 2010.
Change-Id: I21ca768c6a7bab8a08626957583d81fd771c64b4
Reviewed-on: https://code.wireshark.org/review/10732
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a dmg_package_prep target as an alias to app_bundle. Rename the
osx-dmg target to dmg_package. This matches the Windows packaging
target names.
In osx-app.sh, make sure we rpathify the bundle plugin directory.
Change-Id: If41195c9d405ad6bff865625500a8227b77e8092
Reviewed-on: https://code.wireshark.org/review/10734
Reviewed-by: Gerald Combs <gerald@wireshark.org>
On Windows, add a hardening-check target which checks for DYNAMICBASE
and NXCOMPAT using the PowerShell script Get-HardenFlags.ps1.
For a Visual Studio solution, run the check by calling:
msbuild /m /p:Configuration=RelWithDebInfo hardening-check.vcxproj
using the config as appropriate for your build.
Otherwise if we find the Debian/Fedora hardening-check script add a
target which runs it for each of our executables.
Change-Id: I62263e81d155c66e8c8edc751ffab535bf9f3b96
Reviewed-on: https://code.wireshark.org/review/10641
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This lets cmake users configure without installing libusan.
A better or more final fix awaits a decision in bug 11009.
Change-Id: Iea6c4e2ce31817c17931a448f0c72da2a31a2e6d
Ping-Bug: 11009
Reviewed-on: https://code.wireshark.org/review/10454
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
It wasn't working on my system: I kept seeing the old git revision
in '...shark -v' even after deleting version.h
Change-Id: I75f41a7afcee4b9384f33a56014e4af6b527fec5
Reviewed-on: https://code.wireshark.org/review/10265
Petri-Dish: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
TODO:
- LUA is commented out probably needs to be built with MSVC 2015.
- GeoIP is commented out, causes packet-ip* to not build.
- Qt not built, needs Qt with MSVC 2015
Change-Id: I1658077931b89b9a22ee32e5ed7de38e07fb6a55
Reviewed-on: https://code.wireshark.org/review/8683
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Migrate the Camel stats similar to the recent BOOTP and H.225
migrations.
Change-Id: If82617068ff4b8fa186899f66dc34a08585f66cb
Reviewed-on: https://code.wireshark.org/review/9865
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Stats were moved to the dissector in g03802cc.
Change-Id: I1aaf43789695ba3aae54cfaf201263cd0aed74ea
Reviewed-on: https://code.wireshark.org/review/9867
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This reverts commit 4a39706272.
At least in one quick check, CMake 2.8.12.2 added that already with Qt 5.5.0.
Change-Id: Iabf0e4aa0aa34b380f981f7d039fb3d95847041e
Reviewed-on: https://code.wireshark.org/review/9654
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Wireshark.nsi requires SMI_DIR to point to the base of the SMI directory
but FindSMI.cmake doesn't set it. Set it in the main CMakeLists.txt
Change-Id: Id667341273d6abb0d2d64ef91cc62d1ce3f42a83
Reviewed-on: https://code.wireshark.org/review/9499
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Change-Id: I0edc3909516452e6497a050b4617f9aafcea2688
Reviewed-on: https://code.wireshark.org/review/9112
Reviewed-by: Michael Mann <mmann78@netscape.net>
A few sample tap/dissectors (ANSI/A, ANSI MAP) are also included to test the API. The "GUI output" is a bit raw and could use some "prettying up", but all the basic hooks are there.
Telephony "stat grouping" needs to be better alphabetized to properly populate menu (on GTK, probably Qt)
Change-Id: I98514171f69c4ab3a304dccb26c71d629703c9ab
Reviewed-on: https://code.wireshark.org/review/9110
Reviewed-by: Michael Mann <mmann78@netscape.net>
This got missed in the initial refactoring.
Change-Id: I98dcc0816e065efab9b497f753c8d2d388349ff3
Reviewed-on: https://code.wireshark.org/review/9044
Reviewed-by: Michael Mann <mmann78@netscape.net>
Very similar to the refactoring of SRT stats, it provides more commonality of the stats for all GUI interfaces. Currently implemented for TShark and GTK. Affected dissectors: MEGACO, MGCP, Radius
Change-Id: Icb73a7e603dc3502b39bf696227fcaae37d4ed21
Reviewed-on: https://code.wireshark.org/review/8998
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Create "common" SRT tap data collection intended for all GUIs. Refactor/merge functionality of existing dissectors that have SRT support (AFP, DCERPC, Diameter, FC, GTP, LDAP, NCP, RPC, SCIS, SMB, and SMB2) for both TShark and GTK.
SMB and DCERPC "tap packet filtering" were different between TShark and GTK, so I went with GTK filter logic.
CAMEL "tap packet filtering" was different between TShark and GTK, so GTK filtering logic was pushed to the dissector and the TShark tap was left alone.
Change-Id: I7d6eaad0673fe628ef337f9165d7ed94f4a5e1cc
Reviewed-on: https://code.wireshark.org/review/8894
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Set the CMake policy for CMP0042 to old
Change-Id: I2b71e1d8d9b9b90ede11df1a7874a2360c3032c5
Reviewed-on: https://code.wireshark.org/review/8740
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for the locally modified version of zlib to suppress
a CMake warning and disable building of the zlib examples.
Change-Id: I9ae08b49d149951e8626d506f69f1757a1ec7e23
Reviewed-on: https://code.wireshark.org/review/8706
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Rename a local CMake variable to prevent CMP0054 warnings in
CheckTypeSize and CheckStructHasMember modules.
Change-Id: Ida0df954c81333ad37455db90e0d72ca9df8c6f1
Reviewed-on: https://code.wireshark.org/review/8522
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make the gitversion target depend on version.h instead of running
make-version.pl separately. Make wsutil and qtui depend on gitversion.
Change-Id: I32f25347c12c7f86b2439ed4bf517cc8f5fb106f
Reviewed-on: https://code.wireshark.org/review/8299
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: Iab2559c2bac5550987c108c6e917506fcec525e9
Reviewed-on: https://code.wireshark.org/review/8221
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
An undefined or invalid PROCESSOR_ARCHITECTURE will produce an invalid
wireshark.exe.manifest. Make sure it's always set.
Change-Id: I1b33f7bd5e964f05344919d1f11d88c14104c0ce
Reviewed-on: https://code.wireshark.org/review/8253
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Allow the wireshark libs directory to be defined by WIRESHARK_LIB_DIR.
Ensure either WIRESHARK_LIB_DIR or WIRESHARK_BASE_DIR is defined.
Ensure the compiler is a supported version (VS2010, 12 or 13).
Change-Id: I0abd371c5773c08ca255abe308d1a59e2e290a02
Reviewed-on: https://code.wireshark.org/review/8247
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Set the minimum version for Windows to 3.1.3
Set the policy for CMP0054 to squelch a few warnings.
Change-Id: I7647a0e5dce83db2cd87d7b8048c808e10863c7e
Reviewed-on: https://code.wireshark.org/review/8241
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This is a "refactoring part 1" of the srt stats. This first step is using the service_response_time_table for all (possible) TShark srt stats. Next step will be combining the GTK and TShark service_response_time_table, so there is more code reuse and the "shared structure names" between GTK and TShark service_response_time_table won't seem as bad.
Maybe it can even go one step farther and handle a dynamic number of columns so this refactoring can apply to all srt stats.
Change-Id: Ief28e7e55f7dbbf4f2d9bb6f1a1592b87b866137
Reviewed-on: https://code.wireshark.org/review/8210
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I66247132f00c83f35cf78cb63ea00a5ce923fddb
Reviewed-on: https://code.wireshark.org/review/8211
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 9363
Change-Id: Ic64716ef0156607ca40773cef8e76fc4a0825b3c
Reviewed-on: https://code.wireshark.org/review/8196
Reviewed-by: Michael Mann <mmann78@netscape.net>
Standardise the args to win-setup.ps1
Change-Id: Ibd9d7bb338edb1cef444abc37a7b103eec38fb09
Reviewed-on: https://code.wireshark.org/review/8173
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Changed path from "share" to one based on plugns path
For example /usr/local/lib/wireshark/extcap
Change-Id: I8f4a9f274b1cec897ed45de9e05679ac3f230301
Reviewed-on: https://code.wireshark.org/review/8161
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Tested-by: Balint Reczey <balint@balintreczey.hu>
Fix up generation messages for Windows build
Remove some superfluous Lua messages
Change-Id: I405e7edfcb043fc842fe4f0cca8d23d5755527f9
Reviewed-on: https://code.wireshark.org/review/8138
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Make sure the target location for extcap executables and extcap_dir
match on OS X.
Set the extcap directory to Contents/MacOS/extcap. The Mac Developer
Library documentation doesn't explicitly define "Resources", but
examples include data files and not executables. It does state that
executables shouldn't go into PlugIns.
Make sure we rpathify androiddump.
Change-Id: If36c762e2a1991c26e5c01a870deaf191bcf9f94
Reviewed-on: https://code.wireshark.org/review/8093
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Newer versions of CMake generate warnings about the use of
@variable@ references, replace @CPACK_PACKAGE_NAME@ with
${CPACK_PACKAGE_NAME}
Set the policy for CMP0026 to be old to squelch warnings about the
use of target LOCATION
Change-Id: I424083260c51875dde80f98a23d6528c31ff0aec
Reviewed-on: https://code.wireshark.org/review/7977
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
androiddump should be put in extcat directory.
Change-Id: I360eef2d5a68178c73181949b0fe3346585f5190
Reviewed-on: https://code.wireshark.org/review/8083
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Try not to overwrite gspawn*.exe between signing them and packaging
them. (Second try.)
Change-Id: I717f5fca6dc6afbc146927d06e6f74ae6a0a87c8
Reviewed-on: https://code.wireshark.org/review/8082
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This accidentally reverted code from g40ce324. Will try again shortly.
This reverts commit 8d9fdda991.
Change-Id: I0bf7f351b926f1ce4b0c9e19fe0367add1dfee1e
Reviewed-on: https://code.wireshark.org/review/8081
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Try not to overwrite gspawn*.exe between signing them and packaging them.
Change-Id: I9f224b64537c3b0dd6f7f8b94a8837bd427ad2ca
Reviewed-on: https://code.wireshark.org/review/8080
Reviewed-by: Gerald Combs <gerald@wireshark.org>
On Windows, prepend the main program directory to %Path% when spawning
extcap processes. This lets us place androiddump in extcap while allowing
it to locate its DLLs.
Change-Id: I406c47ce71323266d5f14fb596931398464e452d
Reviewed-on: https://code.wireshark.org/review/8057
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add win-setup.ps1, which duplicates the following tasks performed by
config.nmake + Makefile.nmake + win-setup.sh:
- Create the windows library directory.
- Download files.
- Download and unpack zip files.
- Check and set current-tag.txt
Don't verify applications or libraries. CMakeLists.txt does that.
Update the Developer's Guide.
Have POWERSHELL_COMMAND use dot sourcing instead of "-File", which
appears to be a synonym for "-IgnoreTheExitStatusReturnedByThisScript".
This removes our dependencies on unzip and wget and reduces our dependency
on bash.
Change-Id: Ia9def24acbe183d81b9d477fa42e655e4a3a6614
Reviewed-on: https://code.wireshark.org/review/7990
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The Visual Studio solution files created by CMake list "Debug" as the
first configuration, which means that we end up with zlibd1.dll by
default. Many of the OpenSUSE DLLs depend on zlib1.dll. Add the OBS
version in that case.
Change-Id: Ia98490f1a192802d1482e0749bbd2b550e916bc5
Reviewed-on: https://code.wireshark.org/review/8051
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add missing androiddump stuff like:
- release notes
- documentation
- Windows nmake support
- running androiddump as a windows application instead of console on Windows
- addition of androiddump to the Windows installer
Change-Id: I3bc6cc70e4dc96c0cd776f3d965dd2aa0309995d
Reviewed-on: https://code.wireshark.org/review/7981
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>