It's not just for X.25, it's for anything that has the notion of Data
Terminal Equipment and Data Communications Equipment; call it "dte_dce",
not "x25".
Change-Id: I3d51fec8b424e91ffd6d59895f50fc5ece791b08
Reviewed-on: https://code.wireshark.org/review/29834
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Allow file_read() to take a null pointer as a buffer argument; a null
argument means "do everything except copy the bytes from the file to the
user buffer". That means that wtap_read_bytes() and
wtap_read_bytes_or_eof() also support a null pointer as a buffer
argument.
Use wtap_read_bytes() with a null buffer argument rather than
file_skip() to skip forward over data.
This fixes some places where files were mis-identified as ERF files, as
the ERF open heuristics now get a short "read" error if they try to skip
over more bytes than exist in the file.
Change-Id: I4f73499d877c1f582e2bcf9b045034880cb09622
Reviewed-on: https://code.wireshark.org/review/17974
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I1e6bd722b3f04f171b462fc680ca080bb7ec03c7
Reviewed-on: https://code.wireshark.org/review/16625
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Done for performance improvements.
This could probably be done in checkAPIs.pl, but this was just
a quick manual check with grepping.
Change-Id: I91ff102cb528bb00fa2f65489de53890e7e46f2d
Reviewed-on: https://code.wireshark.org/review/15751
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
These file formats have 16-bit packet lengths, so, even with some extra
metadata added, the packet data length will never be bigger than
WTAP_MAX_PACKET_SIZE. (No, we won't ever reduce WTAP_MAX_PACKET_SIZE.)
Change-Id: I9e1b1d90971f91cc6e5d66d0aa93841445b2bc22
Reviewed-on: https://code.wireshark.org/review/15186
Reviewed-by: Guy Harris <guy@alum.mit.edu>
rec_length_remaining is the amount of data we haven't already read from
the record; it starts out as the record length and gets decreased. It
is not the length of data in the packet.
Change-Id: I46cd78e29aee13a686f1f6c8efbe258277e15686
Reviewed-on: https://code.wireshark.org/review/12759
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Before reading the record header of a REC_FRAME{2,4,6} record, make sure
the record length is >= the length of that header.
Whe calling fix_pseudo_header(), pass the actual length of the packet
data, not the remaining length of the record (which may include
padding), so we don't read past the end of the packet data.
Bug: 11827
Change-Id: I1c63a4cb014c4616ffdd202660e68c576f266872
Reviewed-on: https://code.wireshark.org/review/12756
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It doesn't actually *close* any handle, so it's best called a "finish"
routine rather than a "close" routine.
In libwiretap modules, don't bother setting the finish routine pointer
to null - it's already initialized to null (it's probably best not to
require modules to set it).
Change-Id: I19554f3fb826db495f17b36600ae36222cbc21b0
Reviewed-on: https://code.wireshark.org/review/11659
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That indicates that it's a problem specific to *writing* capture files;
we've already converted some errors to that style, and added a new one
in that style.
Change-Id: I8268316fd8b1a9e301bf09ae970b4b1fbcb35c9d
Reviewed-on: https://code.wireshark.org/review/5826
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For cases where record (meta)data is something that can't be written out
in a particular file format, return WTAP_ERR_UNWRITABLE_REC_DATA along
with an err_info string.
Report (and free) that err_info string in cases where
WTAP_ERR_UNWRITABLE_REC_DATA is returned.
Clean up some other error reporting cases, and flag with an XXX some
cases where we aren't reporting errors at all, while we're at it.
Change-Id: I91d02093af0d42c24ec4634c2c773b30f3d39ab3
Reviewed-on: https://code.wireshark.org/review/5823
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it clearer what the problem is, and that it should only be
returned by the dump code path, not by the read code path.
Change-Id: Icc5c9cff43be6c073f0467607555fa7138c5d074
Reviewed-on: https://code.wireshark.org/review/5797
Reviewed-by: Guy Harris <guy@alum.mit.edu>
WTAP_ERR_UNSUPPORTED_ENCAP means "I can't *write* that particular
encapsulation type to a file of this format", which mainly means "that
file format simply can't handle packets of that type";
WTAP_ERR_UNSUPPORTED means "this file can't currently be supported by
Wireshark, as there's some feature in the file - such as a file or
per-packet encapsulation type - that we don't (yet) handle".
Change-Id: I53cadf9913d20efb2bccb29f61877b71d53807be
Reviewed-on: https://code.wireshark.org/review/5794
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Clean up some things we ran across while making those changes.
Change-Id: Ic0d8943d36e6e120d7af0a6148fad98015d1e83e
Reviewed-on: https://code.wireshark.org/review/4581
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Distringuish "the compression data has a problem" from "the capture file
(not compressed, or after decompression) data has a problem", with
WTAP_ERR_DECOMPRESS used for the former (whether it's the gzipping
decoded by our gunzip code or the Sniffer compression) and
WTAP_ERR_BAD_FILE used for the latter.
Change-Id: I8e6bff7edb480deba00c52a9e5afff607492e085
Reviewed-on: https://code.wireshark.org/review/4568
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Get rid of WTAP_ERR_UNC_TRUNCATED and WTAP_ERR_UNC_BAD_OFFSET, and lump
them under WTAP_ERR_BAD_FILE, with an error string; they're just another
form of "this file isn't a valid file of the type in question".
Change-Id: I0e9ac7c2ee66c8d789234a301c1dc2173aef1312
Reviewed-on: https://code.wireshark.org/review/4562
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Unlike the standard I/O routines, the code we introduced that supports
fast random seeking on gzipped files will always supply some specific
error code for read errors, so we don't need WTAP_ERR_CANT_READ.
Add WTAP_ERR_CANT_WRITE for writing, as we're still using the standard
I/O routines for that. Set errno to WTAP_ERR_CANT_WRITE before calling
fwrite() in wtap_dump_file_write(), so that it's used if fwrite() fails
without setting errno.
Change-Id: I6bf066a6838284a532737aa65fd0c9bb3639ad63
Reviewed-on: https://code.wireshark.org/review/4540
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add wtap_read_bytes(), which takes a FILE_T, a pointer, a byte count, an
error number pointer, and an error string pointer as arguments, and that
treats a short read of any sort, including a read that returns 0 bytes,
as a WTAP_ERR_SHORT_READ error, and that returns the error number and
string through its last two arguments.
Add wtap_read_bytes_or_eof(), which is similar, but that treats a read
that returns 0 bytes as an EOF, supplying an error number of 0 as an EOF
indication.
Use those in file readers; that simplifies the code and makes it less
likely that somebody will fail to supply the error number and error
string on a file read error.
Change-Id: Ia5dba2a6f81151e87b614461349d611cffc16210
Reviewed-on: https://code.wireshark.org/review/4512
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For code that's used in more than one place, use macros. This combines
a bunch of checks into the output macros.
Change-Id: Ic32dce75e1c531fd28bfed180856e230277bfe58
Reviewed-on: https://code.wireshark.org/review/4451
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Pcap-ng files don't have a per-file time stamp resolution, they have a
per-interface time stamp resolution. Add new time stamp resolution
types of "unknown" and "per-packet", add the time stamp resolution to
struct wtap_pkthdr, have the libwiretap core initialize it to the
per-file time stamp resolution, and have pcap-ng do the same thing with
the resolution that it does with the packet encapsulation.
Get rid of the TS_PREC_AUTO_XXX values; just have TS_PREC_AUTO, which
means "use the packet's resolution to determine how many significant
digits to display". Rename all the WTAP_FILE_TSPREC_XXX values to
WTAP_TSPREC_XXX, as they're also used for per-packet values.
Change-Id: If9fd8f799b19836a5104aaa0870a951498886c69
Reviewed-on: https://code.wireshark.org/review/4349
Reviewed-by: Guy Harris <guy@alum.mit.edu>
On errors *other* than a short read, we were driving on and processing
the non-data that we didn't read.
Change-Id: I6289ddf31ff7896918a030af9d1261bdc194e7d3
Reviewed-on: https://code.wireshark.org/review/4270
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Check the input pointer in the while clause of the loop, so that we
handle an empty input buffer.
When reading a bit mask, check before fetching the bit mask that we have
two bytes of bit mask and the byte after it.
Before putting an uncompressed input byte into the output, make sure we
wouldn't run past the end of the output buffer.
Before copying an earlier string from the output buffer, make sure it
doesn't run past the end of the data we've decompressed so far.
Bug: 10461
Change-Id: I8bb8d0d291368ae8bf0ac26970ff54d3262a7e6e
Reviewed-on: https://code.wireshark.org/review/4083
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In particular, epan/wslua/lrexlib.c has its own buffer_ routines,
causing some linker warnings on some platforms, as reported in bug
10332.
(Not to be backported to 1.12, as that would change the API and ABI of
libwsutil and libwiretap. We should also make the buffer_ routines in
epan/wslua/lrexlib.c static, which should also address this problem, but
the name change avoids other potential namespace collisions.)
Change-Id: I1d42c7d1778c7e4c019deb2608d476c52001ce28
Reviewed-on: https://code.wireshark.org/review/3351
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Otherwise, if you link with both libwiretap and libfiletap, it's
anybody's guess which one you get. That means you're wasting memory
with two copies of its routines if they're identical, and means
surprising behavior if they're not (which showed up when I was debugging
a double-free crash - fixing libwiretap's buffer_free() didn't fix the
problem, because Wireshark happened to be calling libfiletap' unfixed
buffer_free()).
There's nothing *tap-specific about Buffers, anyway, so it really
belongs in wsutil.
Change-Id: I91537e46917e91277981f8f3365a2c0873152870
Reviewed-on: https://code.wireshark.org/review/3066
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "record type" field to "struct wtap_pkthdr"; currently, it can be
REC_TYPE_PACKET, for a record containing a packet, or
REC_TYPE_FILE_TYPE_SPECIFIC, for records containing file-type-specific
data.
Modify code that reads packets to be able to handle non-packet records,
even if that just means ignoring them.
Rename some routines to indicate that they handle more than just
packets.
We don't yet have any libwiretap code that supplies records other than
REC_TYPE_PACKET or that supporting writing records other than
REC_TYPE_PACKET, or any code to support plugins for handling
REC_TYPE_FILE_TYPE_SPECIFIC records; this is just the first step for bug
8590.
Change-Id: Idb40b78f17c2c3aea72031bcd252abf9bc11c813
Reviewed-on: https://code.wireshark.org/review/1773
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit c0c480d08c.
A better way to do this is to have the record type be part of struct wtap_pkthdr; that keeps the metadata for the record together and requires fewer API changes. That is in-progress.
Change-Id: Ic558f163a48e2c6d0df7f55e81a35a5e24b53bc6
Reviewed-on: https://code.wireshark.org/review/1741
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is the first step towards implementing the mechanisms requestd in
bug 8590; currently, we don't return any records other than packet
records from libwiretap, and just ignore non-packet records in the rest
of Wireshark, but this at least gets the ball rolling.
Change-Id: I34a45b54dd361f69fdad1a758d8ca4f42d67d574
Reviewed-on: https://code.wireshark.org/review/1736
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit 1abeb277f5.
This isn't building, and looks as if it requires significant work to fix.
Change-Id: I622b1bb243e353e874883a302ab419532b7601f2
Reviewed-on: https://code.wireshark.org/review/1568
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Start of refactoring Wiretap and breaking structures down into "generally useful fields for dissection" and "capture specific". Since this in intended as a "base" for Wiretap and Filetap, the "wft" prefix is used for "common" functionality.
The "architectural" changes can be found in cfile.h, wtap.h, wtap-int.h and (new file) wftap-int.h. Most of the other (painstaking) changes were really just the result of compiling those new architecture changes.
bug:9607
Change-Id: Ife858a61760d7a8a03be073546c0e7e582cab2ae
Reviewed-on: https://code.wireshark.org/review/1485
Reviewed-by: Michael Mann <mmann78@netscape.net>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
willing to read or that's bigger than will fit in the file format;
instead, report an error.
For the "I can't write a packet of that type in that file type" error,
report the file type in question.
svn path=/trunk/; revision=54882
of bytes in them to 0, as there's no data in them, and set the offset in
that buffer of the stream's current position, to 0, as we're currently
at the beginning of the file in both streams.
This fixes some tricky-to-reproduce errors (which show up only if the
ngsniffer_t structure is allocated from data that's been allocated,
written to in those variables, and freed).
#BACKPORT 1.8, 1.10
svn path=/trunk/; revision=54544
ngsniffer_read_rec_data(), and separatelyskip extra data after that.
When reading randomly, use the packet length read from the packet
header.
svn path=/trunk/; revision=54523
Guy Harris