- It cannot support IPv6.
- Non-standard use (specifically recommended against in the RFCs)
of the IPv4 fragment ID field.
- Has a narrow and non-obvious use case, IMO.
- It is not supported in the Qt GUI.
- Significant maintenance burden for an obscure feature.
Change-Id: Icaf429269dc42f78c38b8d20001508132499faf8
Reviewed-on: https://code.wireshark.org/review/29239
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Reverse the payload chunks list to achieve a running time of O(n) rather
than O(n²) for insertion of all chunks. Executing a RelWithDebInfo+ASAN
build with `tshark -r chargen-session.pcapng.gz -qz follow,tcp,hex,0`
previously took 11m5s to complete, but now finishes in 16 seconds.
Tested using a capture file with 152k TCP packets (from bug 11777).
Backport note: must update ui/gtk/follow_stream.c too.
Change-Id: Icf70d45f33d4399e53209fb6199d3809608c8d99
Reviewed-on: https://code.wireshark.org/review/28595
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
*rtp_stream* -> rtpstream to follow common name
Change-Id: I381bc1cdb8206c5cfe67e94dd7fb1a5cb25f9c16
Reviewed-on: https://code.wireshark.org/review/28394
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_info_calc_t created
- rtpstream_info_calculate and rtpstream_info_calc_free functions created
- RTP code updated to use such functions
Change-Id: I1053a46cbd0cdef9d70382135da46e732b5af8b8
Reviewed-on: https://code.wireshark.org/review/28361
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_id_t is introduced and its related functions. It encapsulates comparsion of two rtpstreams.
- dest_* renamed to dst_*
- src_port and dst_port are 16bits only.
- sharkd_session.c use common id functions
- IAX2 part related to RTP updated to common *id* function
Change-Id: Id38728a4e5d80363480c7ce42ff9c6eaad069686
Reviewed-on: https://code.wireshark.org/review/28340
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_packet renamed to rtpstream_packet_cb to follow *_cb pattern
- variables/types used in iax2_analysis_dialog were created as copy of *rtp* ones, but names were left as *rtp* -> *iax2*
- struct _rtp_stream_info replaced with rtp_stream_info_t
- there was tap-rtp-analysis.h, but no tap-rtp-analysis.c - related content was moved from tap-rtp-common.c
- *rtp_stream* functions renamed to *rtpstream*
- renamed rtp_stream_info_t to rtpstream_info_t to follow *rtpstream* pattern.
- renamed ui/rtp_stream.c rtpstream_draw -> rtpstream_draw_cb
Change-Id: Ib11ff5367cc464ea1b0c73432bc50b0eb9cd203e
Reviewed-on: https://code.wireshark.org/review/28299
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Respect the "ipv4" and "ipv6" filters and actually restrict the output.
Change-Id: I06ee62ee2c85cb45fb33a52e86ce3698452d175f
Fixes: v1.11.0-rc1-2592-ge3cccd17f4 ("Get rid of some users the addrinfo_list.")
Reviewed-on: https://code.wireshark.org/review/27452
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It has been replaced by cmake.
Change-Id: I83a5eddb8645dbbf6bca9f026066d2e995d8e87a
Reviewed-on: https://code.wireshark.org/review/26969
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
"field" might be allocated even if the calculation type is
CALC_TYPE_BYTES, CALC_TYPE_FRAMES, or CALC_TYPE_FRAMES_AND_BYTES.
Change-Id: I0c70397a89e32172769c277bebfd950f1d21c679
Reviewed-on: https://code.wireshark.org/review/26378
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We don't need to dynamically allocate a guint variable to hold the
response code value - and then not bother to free it! - if we're just
doing a lookup; we can use an automatic variable and pass a pointer to
it.
Change-Id: I6edbb352f0aa33c91ede0f4e1bbb962fa921bea2
Reviewed-on: https://code.wireshark.org/review/26375
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If we're constructing the string, assign the pointer to it to a
non-const pointer variable, set the stat_tap_ui cli_string member to
that variable, and then use the variable to free it when we're done.
Don't cast away constness if we don't have to.
Change-Id: If3b24dbf1c910e1e6eceb76f2f6a7ae3898315f9
Reviewed-on: https://code.wireshark.org/review/25952
Reviewed-by: Guy Harris <guy@alum.mit.edu>
There are no "old" versions of them that we're keeping around.
Change-Id: I3c76a14d0ec1a06df39c547da37f4dea9987df4d
Reviewed-on: https://code.wireshark.org/review/25892
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Ie4dfc68583fa6fc742baeaf9d9fd1c7d2f783f38
Reviewed-on: https://code.wireshark.org/review/25435
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Follow up to having conversions use endpoint_type instead of
port_type.
Change-Id: Ifd59a33bd8b9a013c242bce5fcceb09533f02c17
Reviewed-on: https://code.wireshark.org/review/24172
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
We have WS_INET_ADDRSTRLEN and WS_INET6_ADDRSTRLEN; use them.
Change-Id: Idade0da9fae70d891901acd787b06d21e2ddbc5f
Reviewed-on: https://code.wireshark.org/review/24156
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That allows a parallel typedef of ws_in4_addr for guint32.
Change-Id: I03b230247065e0e3840eb87635315a8e523ef562
Reviewed-on: https://code.wireshark.org/review/24073
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, the compiler ensures proper alignment. In practice, the
alignment was probably proper anyway, but this makes sure.
Change-Id: I5ddc028c97d6961692a297cac17236206b61169d
Reviewed-on: https://code.wireshark.org/review/24061
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I6031600ee3d764a7b2690ff88dbbfb01a1d6244b
Reviewed-on: https://code.wireshark.org/review/23824
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Sequence analysis has its own "filtering" system that required its
tap functions to look for some "filter flags". register_tap_listener()
already comes with a filter argument, so use that to simplify logic
of tap functions in dissectors.
Also have Qt GUI for Flow Graph look like other dialogs that have a
"Limit to display filter" checkbox.
Change-Id: I91d9d9599309786892f5b50c98692e52651e7174
Reviewed-on: https://code.wireshark.org/review/23659
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add flow graph functionality to tshark through -z option.
Output is same as ASCII format saved from GUI.
Change-Id: Iee0bfea7215858e6488b4728581be28287e9ea1a
Reviewed-on: https://code.wireshark.org/review/23652
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
For a sane plugin build environment. Include config.h as the first
header in the .c file instead.
Fix by moving required compiler attribute macros to a new
"ws_attributes.h" API header.
Change-Id: I34f58a927f68c1a0e59686c14d214825149749e1
Reviewed-on: https://code.wireshark.org/review/23400
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Optimize code and open possibility for enriching IPv6 tap data.
Change-Id: I5a204d7464cde32123d5bfe664cc9b6bcf08dbe1
Reviewed-on: https://code.wireshark.org/review/23340
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Replace with easier to understand and already present NAME_RESOLVED given dummy address is always filled.
Change-Id: If8464f89e88722aac70689749fe0d4a31c119db2
Bug: 13798
Reviewed-on: https://code.wireshark.org/review/22110
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add a "report a warning message" routine to the "report_err" code in
libwsutil, and rename files and routines appropriately, as they don't
only handle errors any more.
Have a routine read_enabled_and_disabled_protos() that reads all the
files that enable or disable protocols or heuristic dissectors, enables
and disables them based on the contents of those files, and reports
errors itself (as warnings) using the new "report a warning message"
routine. Fix that error reporting to report separately on the disabled
protocols, enabled protocols, and heuristic dissectors files.
Have a routine to set up the enabled and disabled protocols and
heuristic dissectors from the command-line arguments, so it's done the
same way in all programs.
If we try to enable or disable an unknown heuristic dissector via a
command-line argument, report an error.
Update a bunch of comments.
Update the name of disabled_protos_cleanup(), as it cleans up
information for disabled *and* enabled protocols and for heuristic
dissectors.
Support the command-line flags to enable and disable protocols and
heuristic dissectors in tfshark.
Change-Id: I9b8bd29947cccdf6dc34a0540b5509ef941391df
Reviewed-on: https://code.wireshark.org/review/20966
Reviewed-by: Guy Harris <guy@alum.mit.edu>
João Valverde