Most of the time, the return value tells us nothing useful, as we've
already decided that we're perfectly willing to live with string
truncation. Hopefully this keeps Coverity from whining that those
routines could return an error code (NARRATOR: They don't) and thus that
we're ignoring the possibility of failure (as indicated, we've already
decided that we can live with string truncation, so truncation is *NOT*
a failure).
According to specification, size of PROFINETIOServiceResPDU
is calculated and checked under dissect_RSI_RSP_block
function. Moreover, dissect_rsi_blocks function is added and
type of PDU and operation number (Opnum) are checked before
dissection starts.
The '/codecs' dir was removed in g63af1da7e7.
Avoid using include_directories(), prefer target_include_directories().
Remove some unnecessary CMAKE_CURRENT_*_DIR includes and some other
small cleanups while at it.
I believe this was the original intention, to use these API restricitons
with dissectors only (not that I necessarily agree with that policy either),
and through copy-paste and lack of clear guidelines it spread to other
parts of the build.
Rename the checkAPI groups to make it very clear that this is dissector-only.
This doesn't mean, of course, that good programming practices shouldn't be
followed everywhere. In particular assertions need to be used properly.
Don't use them to catch runtime errors or validate input data.
This commit will be followed by another removing the various ugly hacks
people have been using to get around the checkAPI hammer.
COContainerContent dissects PDInterfaceMrpDataAdjust and
PDInterfaceMrpDataAdjust dissects remaining COContainerContent
because of offset problem. Offset problem is fixed.
It only registers one file type/subtype, so rename it to
wtap_register_file_type_subtype().
That will also force plugins to be recompiled; that will produce compile
errors for some plugins that didn't change to match the new contents of
the file_type_subtype_info structure.
Also check to make sure that the registered file type/subtype supports
at least one type of block; a file type/subtype that doesn't return
*any* blocks and doesn't permit *any* block types to be written is not
very useful. That should also catch most if not all other plugins that
didn't change to match the new contents of the file_type_subtype_info
structure.
Don't make errors registering a file type/subtype fatal; just complain,
don't register the bogus file type/subtype, and drive on.
Provide a wiretap routine to get an array of all savable file
type/subtypes, sorted with pcap and pcapng at the top, followed by the
other types, sorted either by the name or the description.
Use that routine to list options for the -F flag for various commands
Rename wtap_get_savable_file_types_subtypes() to
wtap_get_savable_file_types_subtypes_for_file(), to indicate that it
provides an array of all file type/subtypes in which a given file can be
saved. Have it sort all types, other than the default type/subtype and,
if there is one, the "other" type (both of which are put at the top), by
the name or the description.
Don't allow wtap_register_file_type_subtypes() to override any existing
registrations; have them always register a new type. In that routine,
if there are any emply slots in the table, due to an entry being
unregistered, use it rather than allocating a new slot.
Don't allow unregistration of built-in types.
Rename the "dump open table" to the "file type/subtype table", as it has
entries for all types/subtypes, even if we can't write them.
Initialize that table in a routine that pre-allocates the GArray before
filling it with built-in types/subtypes, so it doesn't keep getting
reallocated.
Get rid of wtap_num_file_types_subtypes - it's just a copy of the size
of the GArray.
Don't have wtap_file_type_subtype_description() crash if handed an
file type/subtype that isn't a valid array index - just return NULL, as
we do with wtap_file_type_subtype_name().
In wtap_name_to_file_type_subtype(), don't use WTAP_FILE_TYPE_SUBTYPE_
names for the backwards-compatibility names - map those names to the
current names, and then look them up. This reduces the number of
uses of hardwired WTAP_FILE_TYPE_SUBTYPE_ values.
Clean up the type of wtap_module_count - it has no need to be a gulong.
Have built-in wiretap file handlers register names to be used for their
file type/subtypes, rather than building the table in init.lua.
Add a new Lua C function get_wtap_filetypes() to construct the
wtap_filetypes table, based on the registered names, and use it in
init.lua.
Add a #define WSLUA_INTERNAL_FUNCTION to register functions intended
only for internal use in init.lua, so they can be made available from
Lua without being documented.
Get rid of WTAP_NUM_FILE_TYPES_SUBTYPES - most code has no need to use
it, as it can just request arrays of types, and the space of
type/subtype codes can be sparse due to registration in any case, so
code has to be careful using it.
wtap_get_num_file_types_subtypes() is no longer used, so remove it. It
returns the number of elements in the file type/subtype array, which is
not necessarily the name of known file type/subtypes, as there may have
been some deregistered types, and those types do *not* get removed from
the array, they just get cleared so that they're available for future
allocation (we don't want the indices of any registered types to changes
if another type is deregistered, as those indicates are the type/subtype
values, so we can't shrink the array).
Clean up white space and remove some comments that shouldn't have been
added.
Instead of having the source file containing the top-level registration
routine for the pinfo_stats_tree plugin checked into our repository,
generate it with tools/make-plugin-reg.py, as we do with other plugins.
While we're at it, fix a comment - "DLL" is a Windows term; the
equivalent term in UN*Xes would be "shared object" ("so" or ".so") or
"dynamic library" ("dylib" or ".dylib").
Current Profinet Spec includes additional RSI features.
As a result, new file is added for PN-RSI protocol.
DCP substitutions related to RSI are added under PN-DCP.
PDRsiInstances record is added under PN-IO.
When creating a _mate_cfg_gog, instead of
allocating space for a `_mate_cfg_gop`,
allocate space for a _mate_cfg_gog. Also, use
`g_new` instead of `gmalloc`.
Adds a pre-commit hook for detecting and replacing
occurrences of `g_malloc()` and `wmem_alloc()` with
`g_new()` and `wmem_new()`, to improve the
readability of Wireshark's code, and
occurrences of
`g_malloc(sizeof(struct myobj) * foo)`
with
`g_new(struct myobj, foo)`
to prevent integer overflows
Also fixes all existing occurrences across
the codebase.
1) Allow AVP_DEBUGGING settings to be made from Preferences, iff compiled so.
2) Flush MATE/AVP debug output once sequential packet parse has completed.
It's possible to play opus payload with libopus (https://opus-codec.org/).
Closes#16882.
Helped-by: Pascal Quantin <pascal.quantin@gmail.com>
Signed-off-by: Lin Sun <lin.sun@zoom.us>
Signed-off-by: Yuanzhi Li <ryanlee@mail.ustc.edu.cn>
when a new AR is established between devices which already
has another AR, same station_info was used and it caused wrong
dissection problem of IOCS and IOData objects of related AR.
In order to fix problem, new struct is added in order to match
station_info and corresponding ARs. New struct is used for
keeping ARUUID, related inputCR and outputCR frame IDs and
setup/release frame numbers of ARs. ARUUID's are used for
adding station_info data to their corresponding conversations.
If matching ARUUID and Frame IDs are found in RTC frame
dissection, then corresponding IOCS and IOData objects are
dissected.
Remove the --check-addtext and --build flags. They were used for
checkAddTextCalls, which was removed in e2735ecfdd.
Add the sources in ui/qt except for qcustomplot.{cpp,h}. Fix issues in
main.cpp, rtp_audio_stream.cpp, and wireshark_zip_helper.cpp.
Rename "index"es in packet-usb-hid.c.
There are undefined bytes which must be included in DHCP
suboption block according to DCP Block Length. In other
words, there are still bytes after dissection of defined
parameters finish but DCP block length does not finish.
In order to solve the problem, these bytes are included in
DHCP suboption block and marked Undefined. The byte number
can be 1, so bytes word in pn_user_data is changed to byte.
Change-Id: I2be23b41a9827f9c2159b97a05658ddf557865cf
Reviewed-on: https://code.wireshark.org/review/38203
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
This commit replaces instances of
(myobj *)wmem_alloc(wmem_X_scope(), sizeof(myobj))
and replaces them with:
wmem_new(wmem_X_scope(), myobj)
to improve the readability of Wireshark's code.
Replacements were made with the following Python script:
import os
import re
import sys
pattern = r'\(([^\s\n]+) ?\*\) ?wmem_alloc(0?)\((wmem_[a-z]+_scope\(\)), sizeof\(\1\)\)'
replacewith = r'wmem_new\2(\3, \1)'
startdir = sys.argv[1]
for root, dirs, files in os.walk(startdir):
for fname in files:
fpath = os.path.join(root, fname)
if not fpath.endswith('.c'):
continue
with open(fpath, 'r') as fh:
fdata = fh.read()
output = re.sub(pattern, replacewith, fdata)
if fdata != output:
print(fpath)
with open(fpath, 'w') as fh:
fh.write(output)
Change-Id: I223cb2fcce336bc99ca21c4a74e4cf758fd00572
Reviewed-on: https://code.wireshark.org/review/38088
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
There were some cases which has zero remaining data
and it was causing an error.
Remaining Data length check added.
Change-Id: Ib0132d892e871c0f7980ff297d18c276aee26ba6
Reviewed-on: https://code.wireshark.org/review/37815
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
According to specification, problematic Block Decode
is fixed.
Change-Id: I0d1a13a26771231eb6f05b18325ee2bb94e975bc
Reviewed-on: https://code.wireshark.org/review/37813
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This true_false_string does not provide anything in relation to the whole
bitfield. The field itself is questionable as a boolean anyway.
This is reported by the conflict checker.
Change-Id: I4a67db6755038b5a07ce4402181a0ea2a3a2b392
Reviewed-on: https://code.wireshark.org/review/37710
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The static arrays are supposed to be arrays of const pointers to int,
not arrays of non-const pointers to const int.
Fixing that means some bugs (scribbling on what's *supposed* to be a
const array) will be caught (see packet-ieee80211-radiotap.c for
examples, the first of which inspired this change and the second of
which was discovered while testing compiles with this change), and
removes the need for some annoying casts.
Also make some of those arrays static while we're at it.
Update documentation and dissector-generator tools.
Change-Id: I789da5fc60aadc15797cefecfd9a9fbe9a130ccc
Reviewed-on: https://code.wireshark.org/review/37517
Petri-Dish: Guy Harris <gharris@sonic.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The 8 combinations of the display address, control, and tag were being
handled as 8 separate cases in `dissect_display_switch()`. This resulted
in duplicated, inconsistent code. Some paths resulted in bug #15219
while others did not have this problem.
I believe I have been able to combine them all into a single case branch
which handles each aspect correctly. I am not a UNISTIM expert and
welcome more knowledgeable reviewers.
Bug: 15219
Change-Id: Ie3eee8e19c10daab27c1df599ce0d03b52f69205
Reviewed-on: https://code.wireshark.org/review/37190
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make sure we have enough data for a CRC.
Bug: 16368
Change-Id: I03a2532061a5cf5e28cb65c83dd4ab90654d1679
Reviewed-on: https://code.wireshark.org/review/36048
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Bug at dissection of ARData is fixed. Moreover,
there is also bug in DCP's DHCP suboption and it
is also fixed.
Change-Id: I185e66f957f330dae587fc63b76cd50f567f5f9b
Reviewed-on: https://code.wireshark.org/review/35974
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It is possible to decode iLBC payload. It uses libilbc library (https://github.com/TimothyGu/libilbc).
Bug: 16314
Change-Id: Id4cad7ae32305a0e94ef32beb24e07733d7f834e
Reviewed-on: https://code.wireshark.org/review/35686
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: Pascal Quantin <pascal@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Added API description clarifies when bytes/samples are used. New variable names
proposed and all existing codecs are adapted to it. Change is just renaming...
Change-Id: I75dba64a49eb3f4369ec7160cb793dda4b44c810
Reviewed-on: https://code.wireshark.org/review/35576
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Pascal Quantin <pascal@wireshark.org>