(Copyright or info about file...)
Change-Id: I90ba8b1c3ec8406b0c3365a69a8555837fc4bbb1
Reviewed-on: https://code.wireshark.org/review/515
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
1. Case sensitivity differences between hf_ field name and formatted string.
2. Unnecessary whitespace between hf_ field name and colon in formatted string
There are cases where the hf_ field name doesn't quite match the proto_tree_add_uint_format, but it's close enough that one of them should be "right", I'm just not sure which is, I just know the string in proto_tree_add_uint_format is the one displayed.
svn path=/trunk/; revision=52098
dissector for ISO 10747 Inter Domain Routing Protocol
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8562
from me:
check for negative return value of tvb_reported_length_remaining()
remove unused hf entries
add modelines
don't initialise variables unless it's necessary
make idrp a new-style dissector
svn path=/trunk/; revision=49002
haven't reassembled, we're probably moving sequentially through the
packet, which means that we'll run past the end of the fragment rather
than past the end of what would have been the reassembled packet had we
reassembled it.
I.e., there's little reason to care whether we're past the end of the
fragment but not past the end of the packet, or whether we're past the
end of the packet; in either case, we're past the end of the fragment,
and if somebody wants to know whether the packet is malformed by
stopping short of certain fields, they should enable reassembly.
So we get rid of the explicit fragment length in tvbuffs and, instead,
have a "this is a fragment" flag; if that flag is set, we throw
FragmentBoundsError rather than ReportedBoundsError if we run past the
end of the reported data.
(This also means we could flag the tvbuff even if we don't know how
large the reassembled packet will be, e.g. when doing IP reassembly.)
Replace tvb_new_subset_length_fragment() with tvb_new_subset_length()
and a new "set the "this is a fragment flag"" routine.
svn path=/trunk/; revision=48940
first fragment of a non-reassembled packet, and we know the length the
packet would have if it were reassembled, this field holds the length of
the fragment, and the "reported length" field shows the length the
packet would have if it were reassembled, so going past the end of the
fragment but staying within the length of the reassembled packet can be
reported as "dissection would have worked if the packet had been
reassembled" rather than "the packet is too short, so it was probably
malformed".
Add a FragmentBoundsError exception, thrown in the "dissection would
have worked if the packet had been reassembled" case.
Add a new tvb_new_subset_length_fragment() routine to create a new
subset tvb with specified fragment and reported lengths. Use it in the
CLNP dissector.
Add some more sanity checks in the CLNP dissector.
svn path=/trunk/; revision=48917
be done on flows from one address to another; reassembly for protocols
running atop TCP should be done on flows from one TCP endpoint to
another.
We do this by:
adding "reassembly table" as a data structure;
associating hash tables for both in-progress reassemblies and
completed reassemblies with that data structure (currently, not
all reassemblies use the latter; they might keep completed
reassemblies in the first table);
having functions to create and destroy keys in that table;
offering standard routines for doing address-based and
address-and-port-based flow processing, so that dissectors not
needing their own specialized flow processing can just use them.
This fixes some mis-reassemblies of NIS YPSERV YPALL responses (where
the second YPALL response is processed as if it were a continuation of
a previous response between different endpoints, even though said
response is already reassembled), and also allows the DCE RPC-specific
stuff to be moved out of epan/reassembly.c into the DCE RPC dissector.
svn path=/trunk/; revision=48491
the source and destination address lengths and data, and adding them in,
rather than by copying those fields to a fixed-size static buffer - that
gets rid of a global variable (global variables considered harmful), and
also means that we don't try to copy 24 bytes of length+address from
packets that don't *have* 24 bytes of length+address (which caused
exceptions to be thrown on some OSI captures I have).
Construct some LI #defines out of other LI #defines, to make it a bit
clearer why they have the values they do.
Support the "additional information related to the clearing of the
connection" variable part parameter of the COTP DR packet (which just
means giving it a name, as its contents are user-defined - some HP-UX
OSI stack appears to just stick in a string saying that it's said
stack).
Make the code that decodes the variable part of a DR packet look like
the code that decodes the variable part of most other packets.
For COTP CR packets, determine the class up front by checking whether
the length is > 2. (At some point we might want to associate a class
indication with the COTP connection, if we see the connection setup,
and, if we have that indication, use it in preference to the
heuristics.)
Make the code to handle various length indicator values in the ATN case
more like the code in the non-ATN case.
Dissect the variable part of COTP ER packets.
Fix tpyos (TDPU->TPDU, tdpu->tpdu) and typpoes (accross->across).
Clean up white space.
svn path=/trunk/; revision=46060
increment offset to point to the first byte after the options
(the code used to set an absolute position, if that was 0, we were stuck
in an endless loop)
svn path=/trunk/; revision=45646
The reassembled fragments tree in the Packet Details view is awesome, but it
lacks one thing: a field that exposes the reassembled data.
tcp.data already exists for exposing a single TCP segment's payload as a byte
array. It would be handy to have something similar for a single application
layer PDU when TCP segment reassembly is involved. I propose
tcp.reassembled.data, named and placed after the already existing field
tcp.reassembled.length.
My primary use case for this feature is outputting tcp.reassembled.data with
tshark for further processing with a script.
The attached patch implements this very feature. Because the reassembled
fragment tree code is general purpose, i.e. not specific to just TCP, any
dissector that relies upon it can add a similar field very cheaply. In that
vein I've also implemented ip.reassembled.data and ipv6.reassembled.data, which
expose reassembled fragment data as a single byte stream for IPv4 and IPv6,
respectively. All other protocols that use the reassembly code have been left
alone, other than inserting NULL into their initializer lists for the newly
introduced struct field reassemble.h:fragment_items.hf_reassembled_data.
svn path=/trunk/; revision=44802
Use #if 0/#endif to comment out some code instead of using /* */;
Use consistent indentation & do some whitespace cleanup.
svn path=/trunk/; revision=36914
keys to have _uint in their names, to match the routines that handle
dissector tables with string keys. (Using _port can confuse people into
thinking they're intended solely for use with TCP/UDP/etc. ports when,
in fact, they work better for things such as Ethernet types, where the
binding of particular values to particular protocols are a lot
stronger.)
svn path=/trunk/; revision=35224
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
connection-oriented transport protocol and ISO 8602/ITU-T X.234
connectionless transport protocol) out of packet-clnp.c into
packet-isotp.c.
svn path=/trunk/; revision=25746
Alexis La Goutte