Add the cause for a syntax error while parsing UATs. Example output:
$ tshark -ouat:ssl_keys:,
tshark: Invalid -o flag "uat:ssl_keys:,": ssl_keys:1: No IP address given.
$ tshark -ouat:unknown:,
tshark: Invalid -o flag "uat:unknown:,": Unknown preference
Change-Id: I549406c4e31a81d29f487ef47bdb3c22da084947
Reviewed-on: https://code.wireshark.org/review/21748
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Automatically resets intarnal epan session after reaching to
specified number of packets, for example
-M 1000
will reset the session every 1000 packets.
this is more like a proposal since the usage is very specific
it is useful for 24/7 live capture with dissection and sending
data directly to another application.
example:
tshark -Y "gtp" -M 100000 -T fields -e gtp.message -e gtp.teid
Change-Id: I8ee8b0380017c684120a93cb3fb43f41615a9c04
Reviewed-on: https://code.wireshark.org/review/21312
Reviewed-by: Evan Huus <eapache@gmail.com>
Petri-Dish: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The cfile_ error-reporting routines free err_info; the caller doesn't
have to and, in fact, mustn't do so themselves.
While we're at it, make sure wtap_seek_read() always zeroes out *err and
nulls out *err_info, so the latter either points to a freshly-allocated
string or is null.
Change-Id: Idfe05a3ba2fbf2647ba14e483187617ee53e3c69
Reviewed-on: https://code.wireshark.org/review/21407
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Packet ranges are used only in the UI; move the packet range stuff into
libui.
Don't pass a print_args_t structure to libwireshark packet-printing
routines, just pass the few parameters they need. Move the declaration
of print_args_t into file.h.
Change-Id: Icff5991eea7d7d56f33b4716105895263d275bcf
Reviewed-on: https://code.wireshark.org/review/21308
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, they don't, for example, get lost as a result of being
scrolled off the screen by output from the second pass.
Also, do the post-processing of output regardless of whether we got read
errors or not, and fix a code error hidden by a call to tshark_debug().
Change-Id: I389c7c794f4dd5fda6e4c50ce480802c92701866
Reviewed-on: https://code.wireshark.org/review/21305
Reviewed-by: Guy Harris <guy@alum.mit.edu>
/home/wireshark/builders/ubuntu-x86-64-petri-dish/ubuntu-x86-64-petri-dish/build/tshark.c: In function ‘main’:
/home/wireshark/builders/ubuntu-x86-64-petri-dish/ubuntu-x86-64-petri-dish/build/tshark.c:653:12:
error: variable ‘success’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Change-Id: I793962c71b0ebfafc7c09b1d865cfa774456bb3a
Reviewed-on: https://code.wireshark.org/review/21303
Petri-Dish: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
They might read the file once or twice, but the key is that they (and
what they call) are doing the work of processing the file's contents.
Change-Id: I2df6257c55ff5ace944f1a1db5e2aec456ed2038
Reviewed-on: https://code.wireshark.org/review/21293
Reviewed-by: Guy Harris <guy@alum.mit.edu>
No need to report the precise error code - it's already reported the
error.
Change-Id: Ib52daf094253deac2a10d16793ebf0f42581afd6
Reviewed-on: https://code.wireshark.org/review/21292
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In TShark, rename load_cap_file() to read_cap_file(); this is TShark,
not Wireshark, so you're not "loading" a file to be manipulated through
the GUI.
In TFShark, rename it to "read_file()"; not only are we not loading it,
it's not even necessarily a capture file.
Change-Id: I122b46ecd8cb7de9c1e1c249ba6c08fdeb93f7e2
Reviewed-on: https://code.wireshark.org/review/21291
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Expand comments while we're at it.
Change-Id: I6dcc791eab1c9e323a9572f3d54720d223bdd64b
Reviewed-on: https://code.wireshark.org/review/21252
Reviewed-by: Guy Harris <guy@alum.mit.edu>
(Clang FTW! Is this not an issue on x86-64 macOS, so that it doesn't
warn about it, or does it, unlike GCC, require a particular -W flag to
warn about non-volatile variables being stomped by setjmp/longjmp?)
Change-Id: I253c1ea324feac1372aa4077aaba03c787a47d9f
Reviewed-on: https://code.wireshark.org/review/21248
Reviewed-by: Guy Harris <guy@alum.mit.edu>
These are similar to the routines added to ui/alert_box.c for dialog-box
libwiretap error reporting.
This centralizes the knowledge about what to say for various libwiretap
errors, removing some duplicate code, and giving more details in some
programs.
Change-Id: I737405c4edaa0e6c27840f78a8c587a8b3ee120b
Reviewed-on: https://code.wireshark.org/review/21234
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use that for both "open for input" and "open for output" errors.
Change-Id: Id17b732a2ca91bd080957b9fa010f781a1c65471
Reviewed-on: https://code.wireshark.org/review/21175
Reviewed-by: Guy Harris <guy@alum.mit.edu>
List all of --enable-protocol, --disable-protocol, --enable-heuristic,
and --disable-heuristic in the SYNOPSIS section of the man pages.
Undent after the list of taps for the -z option, so the following
options are at the same indentation as other options.
List --enable-protocol in the DESCRIPTION, above --disable-protocol.
Include --enable-protocol in the help message.
Change-Id: I680a54430789f3543b2d539fbded22b0b57f7f76
Reviewed-on: https://code.wireshark.org/review/21159
Reviewed-by: Guy Harris <guy@alum.mit.edu>
They deal with sets of hfids, which can belong to protocols as well as
fields (I guess you could argue that a protocol is a field, but...).
Change-Id: Ibd103cfa26427ead4ef54be89f1251908004cfae
Reviewed-on: https://code.wireshark.org/review/21154
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This makes sure that postdissectors that indicate that they need certain
fields in the first pass will get them.
While we're at it:
Fix the field-fetching code in TRANSUM not to assume it got any
instances of the field being fetched.
Rename process_packet_first_pass() in sharkd to process_packet(), as
it's the only routine in sharkd that processes packets.
Rename process_packet() in tshark and tfshark to
process_packet_single_pass(), as it's what's used if we're only doing
one-pass analysis.
Clean up comments and whitespace.
Change-Id: I3769af952c66f5ca4b68002ad6213858ab9cab9b
Reviewed-on: https://code.wireshark.org/review/21063
Reviewed-by: Guy Harris <guy@alum.mit.edu>
XXX_prime_with_YYY makes it a bit clearer than does XXX_prime_YYY that
we're not priming YYY, we're priming XXX *using* YYY.
Change-Id: I1686b8b5469bc0f0bd6db8551fb6301776a1b133
Reviewed-on: https://code.wireshark.org/review/21031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Currently, this is only used to determine whether a protocol tree needs
to be built on the first pass or not - if there are postdissectors that
need fields, it does - but eventually we should be able to use it to
prime the dissection to deliver those fields in cases where we don't
need the *entire* protocol tree (rather than using a hack such as
cooking up a fake tap with a fake filter to do that).
Update MATE and TRANSUM to use it.
Clean up code to check whether we need a protocol tree, and add comments
before that code indicating, in each case, what the criteria are.
The array of postdissectors includes a length, so we don't need to
separately keep track of the number of postdissectors.
Clean up indentation while we're at it.
Change-Id: I71d4025848206d144bc54cc82941089a50e80ab7
Reviewed-on: https://code.wireshark.org/review/21029
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, nothing using libwireshark needs to know what settings need to
be loaded, they just call epan_load_settings().
Change-Id: I9390e259e286fc4f5acaeaac2767e4c3c4b656af
Reviewed-on: https://code.wireshark.org/review/20983
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It doesn't belong in libwireshark, as it doesn't affect dissection, but
it *does* belong in libui, as it's helper code for the UIs.
Change-Id: I8a5e0640a299a08e9ec1917dd253197438ebfdbc
Reviewed-on: https://code.wireshark.org/review/20974
Reviewed-by: Guy Harris <guy@alum.mit.edu>
No need to duplicate it in N different programs.
Update comments while we're at it.
Change-Id: I3096cbe5448a19363eff6303bdd54e522dae9336
Reviewed-on: https://code.wireshark.org/review/20973
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's identical in the GTK+ and Qt UIs, and it should just be done in
libwireshark.
Rename some routines to just speak of enabled_and_disabled_lists, so we
don't have to say enabled_and_disabled_protos_and_heuristic_dissectors
or something such as that.
Clean up indentation.
Change-Id: Ief2e612d9e1b60d8d0123b6bd3409dce5faf6495
Reviewed-on: https://code.wireshark.org/review/20970
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "report a warning message" routine to the "report_err" code in
libwsutil, and rename files and routines appropriately, as they don't
only handle errors any more.
Have a routine read_enabled_and_disabled_protos() that reads all the
files that enable or disable protocols or heuristic dissectors, enables
and disables them based on the contents of those files, and reports
errors itself (as warnings) using the new "report a warning message"
routine. Fix that error reporting to report separately on the disabled
protocols, enabled protocols, and heuristic dissectors files.
Have a routine to set up the enabled and disabled protocols and
heuristic dissectors from the command-line arguments, so it's done the
same way in all programs.
If we try to enable or disable an unknown heuristic dissector via a
command-line argument, report an error.
Update a bunch of comments.
Update the name of disabled_protos_cleanup(), as it cleans up
information for disabled *and* enabled protocols and for heuristic
dissectors.
Support the command-line flags to enable and disable protocols and
heuristic dissectors in tfshark.
Change-Id: I9b8bd29947cccdf6dc34a0540b5509ef941391df
Reviewed-on: https://code.wireshark.org/review/20966
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Avoid anachronisms, however; there was no "macOS 10.0" or even "OS X
10.0", for example. It was "Mac OS X" until 10.8 (although 10.7 was
sometimes called "OS X" and sometimes called "Mac OS X"), and it was "OS
X" from 10.8 to 10.11.
Change-Id: Ie4a848997dcc6c45c2245c1fb84ec526032375c3
Reviewed-on: https://code.wireshark.org/review/20933
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Default value for snaplen is defined in wiretap/wtap.h:
#define WTAP_MAX_PACKET_SIZE 262144
and used in capture_opts.c:
capture_opts->default_options.snaplen =
WTAP_MAX_PACKET_SIZE;
but help and man pages don't reflect this change.
Change-Id: I35ddf1e8b7ffd657f4e01b3fe6b4c44c9acece2b
Reviewed-on: https://code.wireshark.org/review/20738
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Windows vscodeanalysis complains even though the event is probably
very unlikely.
Change-Id: Iafe158eea5586908209d6bfe1e45540117558673
Reviewed-on: https://code.wireshark.org/review/20727
Reviewed-by: Michael Mann <mmann78@netscape.net>
This patch augments tshark's -T report with a "tabs" option.
When the -T tabs option is enabled an ASCII horizontal tab character
is inserted between each column of the human-readable one-line
packet summary record.
Change-Id: Id10a6e21e231eb2e52b6342ed05399db1a5fcfdf
Reviewed-on: https://code.wireshark.org/review/20537
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Modified tshark -T json -x output
Added tshark -T jsonraw output
json2pcap.py (can be used for basic packet editing by modifying json)
The modification in tshark -T json -x and new tshark -T jsonraw output
add into hex-data output in JSON also information on which position
each field is dissected in the original frame, what is the field length,
bitmask (for not byte aligned fields) and type. This information can be
used for latter processing. One use-case is json2pcap script which
assembles the protocol layers back together from upper to lowers layers,
which allows the basic packet modification/editing/rewriting.
Change-Id: Ibf948eb8fc7e3b0b51c12df6c3855f705a9c7925
Reviewed-on: https://code.wireshark.org/review/19990
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Our user-facing messages should have a helpful (or at the very least
neutral) tone. In English, exclamation points are neither. Replace a
bunch of them with periods.
Change-Id: I29c3b2f84c25e06aae5b559860224559053a0378
Reviewed-on: https://code.wireshark.org/review/20189
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The cleanup routine has been added to exit section of the applications.
Those which required a exit restyle have been patched as well.
Change-Id: I3a8787f0718ac7fef00dc58176869c7510fda7b1
Reviewed-on: https://code.wireshark.org/review/19949
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
This patch introduces the frame.interface_description field.
While testing this new functionality it became obvious that we have
a non-optimal interaction between the existing cfile.c's
cap_file_get_interface_name(), the recently added frame.interface_name
field and this new frame.interface_description field.
The string returned from cap_file_get_interface_name() may in fact
come from one of three different sources: the idb's interface name
(if it exists) or the idb's interface description (if that exists)
or a default text of "unknown". The string ultimately becomes the
rame.interface_name whether or not the idb had an interface name
option to begin with. This behavior does not allow one to test for
the simple presence of frame.interface_name. The new peer function
cap_file_get_interface_description() added by this patch returns
NULL instead of "unknown" if the idb does not have an interface
description. Should cap_file_get_interface_name() be similarly
modified to return NULL if the idb does not have an interface name?
Bug: 9781
Change-Id: Ie479f373c5080c004dd22bd88919838feca71e95
Reviewed-on: https://code.wireshark.org/review/19861
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
capture_opts_cleanup() doesn't exist if we're building without libpcap,
so don't call it if we're building without libpcap.
Change-Id: I6c9defea15fac7df5533269c4945b965d9a67c25
Reviewed-on: https://code.wireshark.org/review/19924
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This required a restyle of the way the different apps exit.
Change-Id: Iedf728488954cc415b620ff0284d2e60f38f87d2
Reviewed-on: https://code.wireshark.org/review/19780
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
We save a list of dissectors that are disabled through the Enabled Protocols
dialog. This is because we assume dissectors are enabled by default.
For dissectors that are disabled by default, we have no way to keep them
enabled through the Enabled Protocols dialog. A dissector that defaults
to being disabled has to be reset to enabled each time Wireshark is launched.
Add a list similar to the disabled list for enabling dissectors that are
disabled by default.
This mostly applies to post-dissectors.
Change-Id: I31a8d97a9fdbc472fe2a8666384e0f8786bb8e9f
Reviewed-on: https://code.wireshark.org/review/19405
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Make the init_progfile_dir() call unconditionally, even if plugins
aren't supported, as that doesn't necessarily mean nobody uses the
directory containing the executable.
Report the error the same way in all programs, and free the error string
after we're finished with it.
Make the error - and the comment before the code - reflect what
init_progfile_dir() is actually doing (the goal is to get the full
pathname of the directory *containing* the executable; that's generally
done by getting the pathname of the executable and stripping off the
name of the executable, but that's won't necessarily always be the
case). Also note for TShark that we won't be able to capture traffic,
just as we do for Wireshark (if we don't have the pathname of the
program file, we don't have a pathname to use to find dumpcap).
Have the plugin scanner just fail silently if we weren't able to get the
plugin directory path, so we don't have to worry about calling it if
init_progfile_dir() fails.
Clean up white space while we're at it.
Change-Id: I8e580c719aab6fbf74a764bf6629962394fff7c8
Reviewed-on: https://code.wireshark.org/review/19076
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Peter Wu