Support for the -m (monospace font) flag was removed from Wireshark in
2.3/2.4 in g37252634c4. Remove it from the man page and help output.
Change-Id: Idaafeb6cd30d7deea6086a065168c91affd6f0ad
Reviewed-on: https://code.wireshark.org/review/36926
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
For long options, without corresponding short options, to be processed
they need to be assigned a value, preferably outside of the range of
all possible short options. The code in various places tries to stay
clear of these low values, but further coordination is missing, easily
leading to issues when option processing code gets extended and/or
reorganized.
This change introduces a single location from where each catagory of
command line long option can derive a base value, which should minimize
potential option value collisions.
Change-Id: Ic8861a347d0050f74002de3aa1fcfb01202866e5
Reviewed-on: https://code.wireshark.org/review/35459
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Option string composition has grown organically over time and is
depending on compilation options also. This results in somewhat complex
macro definitions and the use of the string concatenation feature of the
C compiler. This change tries to clean up some of this magic by removing
definitions of empty strings and merging of adjacent strings.
Change-Id: I968449ea9b564915bee468a0cac0e114983ceebe
Reviewed-on: https://code.wireshark.org/review/35429
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Documentation of the Wireshark command line options between help text,
manual page and user's guide diverged over time. One aspect of this is
the implementation of more long options. This change tries to update
all documentation to be complete and in sync again.
Bug: 16168
Change-Id: Id833fbeb14fdb7b3dbc1564504a25d96f4367c91
Reviewed-on: https://code.wireshark.org/review/35047
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
The --display command line parameter must not have an equal sign
between it and the value in order to work. Otherwise it is interpreted
as a abbreviation of the display-filter long option.
Bug: 16167
Change-Id: Ifcdd4cb8c41b24faccf01936a019a318fb1c3e0c
Reviewed-on: https://code.wireshark.org/review/34961
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
cmdarg_err() is for reporting errors for command-line programs and
command-line errors in GUI programs; it's not something for any of the
Wireshark libraries to use.
The various routines for parsing numerical command-line arguments are
not for general use, they're just for use when parsing arguments.
Change-Id: I100bd4a55ab8ee4497f41d9651b0c5670e6c1e7f
Reviewed-on: https://code.wireshark.org/review/31281
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have a ws_init_version_info() routine that, given an application name
string:
constructs the app-name-and-version-information string, and
saves it;
adds the initial crash information on platforms that support it,
and saves it.
Have show_version() use the saved information and take no arguments.
Add a show_help_header() routine to print the header for --help
command-line options, given a description of the application; it prints
the application name and version information, the description, and the
"See {wireshark.org URL}" line.
Use those routines in various places, including providing the
"application name" string in pcapng SHBs.
Change-Id: I0042a8fcc91aa919ad5c381a8b8674a007ce66df
Reviewed-on: https://code.wireshark.org/review/31029
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add 'v' option for VLAN ID resolving and get rid of
deprecated 'C' option.
Bug: 14826
Change-Id: I63104f4a465d251048693ad02882ea7eb2c4d926
Reviewed-on: https://code.wireshark.org/review/30029
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Given that we're not using GTK+, the answer to the question is "no".
Change-Id: Ib0e512909993830b1462d1fe3eada9265d9b1cdf
Reviewed-on: https://code.wireshark.org/review/27515
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add an exit_application() routine that calls wsApp->quit() + exit() in
the Qt UI and exit() in the GTK+ UI. Make sure we call it instead of
exit() when needed.
Bug: 14395
Change-Id: I171b5fd19ce4664db4a2ebb4b8c33e278dcec427
Reviewed-on: https://code.wireshark.org/review/26121
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I6b05399395bcc35e59b73b4030ba4a05711a7b1a
Reviewed-on: https://code.wireshark.org/review/25565
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Move fill_in_local_interfaces to a worker thread and start it as early
as possible. Add a mutex for global_capture_opts.
Change-Id: I09beab751c9c2917f017b6c082166d86ca693544
Reviewed-on: https://code.wireshark.org/review/24757
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Only Wireshark Qt is officially supported on macOS.
Change-Id: Id0e3429891173d4b91e99061bcf11df2e38bc0bf
Reviewed-on: https://code.wireshark.org/review/23931
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
It's not installed so like most other files it doesn't need or benefit
from the prefix.
Change-Id: I01517e06f12b3101fee21b68cba3bc6842bbef5c
Reviewed-on: https://code.wireshark.org/review/23751
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
pcap provides a pcap_set_tstamp_type function, which can be used to request
hardware timestamps from a supporting kernel.
This patch adds support for aforementioned function as well as two new
command line options to dumpcap, wireshark and tshark:
--list-time-stamp-types
List time stamp types supported for the interface
--time-stamp-type <type>
Change the interface's timestamp method
Name choice mimics those used by tcpdump(1), which already supports this
feature. However, unlike tcpdump, we provide both options unconditionally.
If Wireshark was configured without pcap_set_tstamp_type being available,
--list-time-stamp-types reports an empty list.
Change-Id: I418a4b2b84cb01949cd262aad0ad8427f5ac0652
Signed-off-by: Ahmad Fatoum <ahmad.fatoum@siemens.com>
Reviewed-on: https://code.wireshark.org/review/23113
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the "interval" option to "-b". Each new capture starts at the
exact start of a time interval. For instance, using -b interval:3600
will start a new capture file at each whole hour.
Changed the duration option in the GUI interfaces to use the new
interval option.
Change-Id: I0180c43843f5d2f0c2f50153c9ce42ac7fa5aeae
Reviewed-on: https://code.wireshark.org/review/22428
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Sake Blok <sake.blok@SYN-bit.nl>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add the cause for a syntax error while parsing UATs. Example output:
$ tshark -ouat:ssl_keys:,
tshark: Invalid -o flag "uat:ssl_keys:,": ssl_keys:1: No IP address given.
$ tshark -ouat:unknown:,
tshark: Invalid -o flag "uat:unknown:,": Unknown preference
Change-Id: I549406c4e31a81d29f487ef47bdb3c22da084947
Reviewed-on: https://code.wireshark.org/review/21748
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Reviewed-by: Michael Mann <mmann78@netscape.net>
List all of --enable-protocol, --disable-protocol, --enable-heuristic,
and --disable-heuristic in the SYNOPSIS section of the man pages.
Undent after the list of taps for the -z option, so the following
options are at the same indentation as other options.
List --enable-protocol in the DESCRIPTION, above --disable-protocol.
Include --enable-protocol in the help message.
Change-Id: I680a54430789f3543b2d539fbded22b0b57f7f76
Reviewed-on: https://code.wireshark.org/review/21159
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Avoid anachronisms, however; there was no "macOS 10.0" or even "OS X
10.0", for example. It was "Mac OS X" until 10.8 (although 10.7 was
sometimes called "OS X" and sometimes called "Mac OS X"), and it was "OS
X" from 10.8 to 10.11.
Change-Id: Ie4a848997dcc6c45c2245c1fb84ec526032375c3
Reviewed-on: https://code.wireshark.org/review/20933
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Default value for snaplen is defined in wiretap/wtap.h:
#define WTAP_MAX_PACKET_SIZE 262144
and used in capture_opts.c:
capture_opts->default_options.snaplen =
WTAP_MAX_PACKET_SIZE;
but help and man pages don't reflect this change.
Change-Id: I35ddf1e8b7ffd657f4e01b3fe6b4c44c9acece2b
Reviewed-on: https://code.wireshark.org/review/20738
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
We save a list of dissectors that are disabled through the Enabled Protocols
dialog. This is because we assume dissectors are enabled by default.
For dissectors that are disabled by default, we have no way to keep them
enabled through the Enabled Protocols dialog. A dissector that defaults
to being disabled has to be reset to enabled each time Wireshark is launched.
Add a list similar to the disabled list for enabling dissectors that are
disabled by default.
This mostly applies to post-dissectors.
Change-Id: I31a8d97a9fdbc472fe2a8666384e0f8786bb8e9f
Reviewed-on: https://code.wireshark.org/review/19405
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also update tfshark to use that code.
Change-Id: Ic03fb8ff48c8bfc460298d180b436e53f0076cbe
Reviewed-on: https://code.wireshark.org/review/18588
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have it return TRUE if the option is OK and FALSE if it isn't, and let
its caller exit as appropriate.
Also, rename it - it's not adding something to a collection, it's just
handling the option.
Change-Id: I41863cbb67b7c257d900d3011609891b9b4a7467
Reviewed-on: https://code.wireshark.org/review/18587
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have them handle -d, -t, --disable-protocol, --disable-heuristic, and
--enable-heuristic for TShark and both flavors of Wireshark.
Change-Id: I612c276b1f9df8a2092202d23ab3d48be7857e85
Reviewed-on: https://code.wireshark.org/review/18583
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's not a capture option, so it doesn't belong there.
Change-Id: I8aa6719a5a8e90c734c7acfc01b1ba2818498de3
Reviewed-on: https://code.wireshark.org/review/18427
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The feature activates/deactivates fullscreen mode of Qt UI.
A new menu item has been added as well as a shortcut (F11 or Ctrl+Cmd+F)
according to browsers common shortcut.
Change-Id: I01906b494d0a13ce70d27c00ebbe03e6ec87cbd7
Reviewed-on: https://code.wireshark.org/review/18332
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
The -m (monospace font) flag was deprecated in 2.2. Go ahead and remove
it in 2.3 / 2.4.
Change-Id: I6b4911174675cedec979621c2776353314e73eb1
Reviewed-on: https://code.wireshark.org/review/18193
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use the get.*guint32 routines to get unsigned values.
Change-Id: I75e83b2d21bdf08c7c995e36e4deb3b1c6d6959d
Reviewed-on: https://code.wireshark.org/review/17651
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add the time format to commandline_param_info_t and apply it when we've
finished application initialization.
Bug: 12489
Change-Id: Ice626198a610567e945a8e53c0c1093797e8208e
Reviewed-on: https://code.wireshark.org/review/16232
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Other code looks at the global structure, so there won't be other
structures; just fill in the global structure directly.
Change-Id: I4dc87b79168c5a7c9ab1f085aa2d78cc6d2c9019
Reviewed-on: https://code.wireshark.org/review/16184
Reviewed-by: Guy Harris <guy@alum.mit.edu>
And make the commandline_info structure global, so all the places that
look at quit_after_cap can get at it.
Change-Id: I006329cf8842c655cca36f024570855d1b16e107
Reviewed-on: https://code.wireshark.org/review/16182
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Really, all the GUI-related options should be pulled out, so they're not
cluttering up dumpcap and tshark.
Change-Id: I0276dee2be48bae3498a819d8c0c2747fe1352e7
Reviewed-on: https://code.wireshark.org/review/16180
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add support for -j, -J, and -l. Mark the -m flag deprecated.
Bug: 12546
Change-Id: Ic44b3997840018e5d571aa1813a1646bce11d4a6
Reviewed-on: https://code.wireshark.org/review/16083
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Put that code inside #ifdef HAVE_LIBPCAP/#endif.
Change-Id: I85768fd49a008341a95ac3c8656e96afa6741fbe
Reviewed-on: https://code.wireshark.org/review/16030
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Just pass them directly as arguments, don't stuff them into a structure.
Change-Id: Iac84226f54898bc953011bca64795e9049762905
Reviewed-on: https://code.wireshark.org/review/16022
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Get rid of the capture_option_specified and arg_error members of the
commandline_capture_param_info_t and commandline_param_info_t
structures, and have them be local variables in
commandline_early_options() and commandline_other_options(). Have
commandline_early_options() print the "sorry, Wireshark wasn't built
with pcap" and exit if -D was specified but Wireshark wasn't built with
pcap.
Change-Id: I0efcdea89d9585af8f3c0a28aee060f33d3ec5fd
Reviewed-on: https://code.wireshark.org/review/16021
Reviewed-by: Guy Harris <guy@alum.mit.edu>