Add the ability to rotate files after a specified number of packets (`-b
packets:NUM`). Move some condition checks to capture_loop_write_packet_cb.
Add `-a packets:NUM` in order to be consistent. It is functionally
equivalent to the `-c` flag.
Add a corresponding "packets" option to the Capture Interfaces dialog
Output tab.
Add initial tests for autostop and ringbuffer conditions.
Change-Id: I66eb968927ed287deb8edb96db96d7c73526c257
Reviewed-on: https://code.wireshark.org/review/30534
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
sshdump and ciscodump have been updated to use it.
Change-Id: I4e1e0d35f086d76c13264939bc4f14308cc88cfb
Reviewed-on: https://code.wireshark.org/review/30496
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When importing a file from hex dump, this change adds a way to
add a custom dummy header. It's an export_pdu header which uses
one single tag: the protocol name. This allows to call directly
a dissector without more dummy headers.
Example: it can be used to call the DNS dissector without fake
eth/ip/udp headers.
Change-Id: I12fd6d09a131acd9bd1f0d7c4c8aefcd0d718b26
Reviewed-on: https://code.wireshark.org/review/30403
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I1f828df1735bd10ef8849d208e10ea1339ba37e2
Reviewed-on: https://code.wireshark.org/review/26403
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a new button to UAT frames to copy entries from another profile.
Change-Id: I9decb5ed5d67e97388ee7b22a15cacae4d5a3621
Reviewed-on: https://code.wireshark.org/review/30084
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add an entry for the copy from profile feature for coloring rules,
IO graphs and protocol preference tables.
Change-Id: I79a191c1ec13e96fcb1b5fb04dd28c95dd034aca
Reviewed-on: https://code.wireshark.org/review/30070
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Switch the Capture Interfaces section to paragraphs and add one for
sdjournal.
Change-Id: I677a403bf2ea377214c6179f9f22facc9a4ff091
Reviewed-on: https://code.wireshark.org/review/29963
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Rename the "ssl" protocol to "tls" and add an "ssl" alias. Prefer "TLS"
over "SSL" in user interface text and in the documentation.
Fix the test_tls_master_secret test while we're here.
Bug: 14922
Change-Id: Iab6ba2c7c4c0f8f6dd0f6d5d90fac5e9486612f8
Reviewed-on: https://code.wireshark.org/review/29649
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The "known bugs" list is rarely updated. Remove it and add more helpful
and up-to-date references.
Change-Id: I5aea57c66c6645b5c903ebcebcb1676af5204ce2
Reviewed-on: https://code.wireshark.org/review/29048
Reviewed-by: Gerald Combs <gerald@wireshark.org>
- It cannot support IPv6.
- Non-standard use (specifically recommended against in the RFCs)
of the IPv4 fragment ID field.
- Has a narrow and non-obvious use case, IMO.
- It is not supported in the Qt GUI.
- Significant maintenance burden for an obscure feature.
Change-Id: Icaf429269dc42f78c38b8d20001508132499faf8
Reviewed-on: https://code.wireshark.org/review/29239
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
The "debug" logging function overwrites the "debug" package which breaks
luacov: https://github.com/keplerproject/luacov/issues/55
Change-Id: I9b6025c060733198bfff8ea959444c09d6e08709
Reviewed-on: https://code.wireshark.org/review/29449
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for aliasing one protocol name to another and for filtering
using aliased fields. Mark aliased fields as deprecated.
Rename the BOOTP dissector to DHCP and alias "bootp" to "dhcp". This
lets you use both "dhcp.type" and "bootp.type" as display filter fields
without having to duplicate all 500+ DHCP/BOOTP fields.
To do:
- Add checks to proto.c:check_valid_filter_name_or_fail?
- Transition SSL to TLS.
- Rename packet-bootp.c to packet-dhcp.c?
Change-Id: I29977859995e8347d80b8e83f1618db441b10279
Ping-Bug: 14922
Reviewed-on: https://code.wireshark.org/review/29327
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a file parser and dissector that can handle the output of
`journalctl -o export`. From here we can add a systemd journal extcap
and possibly support for the JSON and binary formats.
Change-Id: I01576959b2c347ce7ac9aa57cdb5c119c81d61e9
Reviewed-on: https://code.wireshark.org/review/29311
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Currently out-of-order segments will result in cutting a stream into
two pieces while the out-of-order segment itself is ignored. For
example, a stream of segments "ABDCE" is interpreted as "AB", "DE" with
"C" ignored. This behavior breaks TLS decryption or prevent application
layer PDUs (such as HTTP requests/responses) from being reconstructed.
To fix this, buffer segments when a gap is detected.
The proposed approach extends the "multi-segment PDU" (MSP) mechanism
which is normally used for linking multiple, sequential TCP segments
into a single PDU. When a gap is detected between segments, it is
assumed that the segments within this gap are out-of-order and will be
received (or retransmitted) later.
The current implementation has a limitation though, if multiple gaps
exist, then the subdissector will only be called when all gaps are
filled (the subdissector will receive segments later than necessary).
For example with "ACEBD", "ABC" can already be processed after "B" is
received (with "E" still buffered), but due to how MSP are extended, it
must receive "D" too before it reassembles "ABCDE". In practice this
could mean that the request/response times between HTTP requests and
responses are slightly off, but at least the stream is correct now.
(These limitations are documented in the User's Guide.)
As the feature fails at least the 802.11 decryption test where packets
are missing (instead of OoO), hide this feature behind a preference.
Tested with captures containing out-of-order TCP segments from the
linked bug reports, comparing the effect of toggling the preference on
the summary output of tshark, the verbose output (-V) and the two-pass
output (-2 or -2V). Captures marked with "ok" just needed "simple"
out-of-order handling. Captures marked with "ok2" additionally required
the reassembly API change to set the correct reassembled length.
This change does "regress" on bug 10289 though when the preference is
enabled as retransmitted single-segment PDUs are now passed to
subdissectors. I added a TODO comment for this unrelated cosmetic issue.
Bug: 3389 # capture 2907 (HTTP) ok
Bug: 4727 # capture 4590 (HTTP) ok
Bug: 9461 # capture 12130 (TLS/HTTP/RPC-over-HTTP +key 12131) ok
Bug: 12006 # capture 14236 (HTTP) ok2; capture 15261 (HTTP) ok
Bug: 13517 # capture 15370 (HTTP) ok; capture 16059 (MQ) ok
Bug: 13754 # capture 15593 (MySQL) ok2
Bug: 14649 # capture 16305 (WebSocket) ok
Change-Id: If3938c5c1c96db8f7f50e39ea779f623ce657d56
Reviewed-on: https://code.wireshark.org/review/27943
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
AsciiDoc allows dashes in macro names but not underscores. Current
versions of AsciiDoctor allow the inverse. Remove underscores to allow
for easier copying and pasting.
Remove asciidoc.conf while we're here. It's no longer used.
Change-Id: I32d8a4ec695b9e17a80ac720ee9faf62dbb362d3
Reviewed-on: https://code.wireshark.org/review/27787
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
DoIP is a vehicle bus protocol. It is carried by TCP or UDP and may include an UDS payload.
Change-Id: I1459c51fd710da8e2aaff0056bbf3f6e42c1b25e
Reviewed-on: https://code.wireshark.org/review/27448
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add back the capture info dialog. Draw sparklines for each protocol.
Update the User's Guide.
Bug: 12004
Change-Id: I45be8a0df4752255831a8b139ee84bb34d675ba9
Reviewed-on: https://code.wireshark.org/review/27565
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Dissector for GSM-R protocol. Specification ETSI TS 102 610.
Trace example in https://wiki.wireshark.org/SampleCaptures [[attachment:gsm-r.uus1.pcap]]
Change-Id: I7496bfa141d75b3460f7c3bdbb791e24d4810231
Reviewed-on: https://code.wireshark.org/review/26929
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This adds support for the TPM 2.0 "protocol" as defined
by the Trusted Computing Group (TCG) specification.
The specification can be found here:
https://trustedcomputinggroup.org/tpm-library-specification/
The specification defines the format of the all TPM requests
and responses that this dissector supports.
A sample capture file that can be used for testing this
can be found in the https://wiki.wireshark.org/SampleCaptures
It is called policy-authorizeNV.pcap.
Change-Id: I557cb779f3adc5313e6d3498bbfeb56fdd308fbf
Reviewed-on: https://code.wireshark.org/review/26866
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The Osmocom GSUP protocol is a light-weight alternative to the
classic GSM MAP protocol. It operates between (MSC|SGSN) and HLR.
Change-Id: I954c7e332dce3a8855f7f4ace0b878f66da6f02e
Reviewed-on: https://code.wireshark.org/review/25477
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Gerald Combs
Harald Welte