Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
/* packet-chdlc.c
|
|
|
|
* Routines for Cisco HDLC packet disassembly
|
|
|
|
*
|
2006-05-21 04:49:01 +00:00
|
|
|
* Wireshark - Network traffic analyzer
|
|
|
|
* By Gerald Combs <gerald@wireshark.org>
|
2001-11-20 21:59:18 +00:00
|
|
|
* Copyright 1998 Gerald Combs
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
* of the License, or (at your option) any later version.
|
2002-08-28 21:04:11 +00:00
|
|
|
*
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
2002-08-28 21:04:11 +00:00
|
|
|
*
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
2012-06-28 22:56:06 +00:00
|
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
*/
|
|
|
|
|
2012-09-20 02:03:38 +00:00
|
|
|
#include "config.h"
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
2002-01-21 07:37:49 +00:00
|
|
|
#include <epan/packet.h>
|
2013-11-09 15:44:29 +00:00
|
|
|
#include <wsutil/pint.h>
|
2005-09-17 00:02:31 +00:00
|
|
|
#include <epan/etypes.h>
|
2004-09-27 22:55:15 +00:00
|
|
|
#include <epan/prefs.h>
|
2005-09-17 00:02:31 +00:00
|
|
|
#include <epan/chdlctypes.h>
|
|
|
|
#include <epan/nlpid.h>
|
2004-08-06 19:57:49 +00:00
|
|
|
#include <epan/addr_resolv.h>
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
#include "packet-chdlc.h"
|
2003-08-26 05:52:53 +00:00
|
|
|
#include "packet-ppp.h"
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
#include "packet-ip.h"
|
2014-11-09 02:08:52 +00:00
|
|
|
#include "packet-juniper.h"
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* See section 4.3.1 of RFC 1547, and
|
|
|
|
*
|
2012-04-24 18:27:06 +00:00
|
|
|
* http://www.nethelp.no/net/cisco-hdlc.txt
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
*/
|
|
|
|
|
2013-03-15 06:26:47 +00:00
|
|
|
void proto_register_chdlc(void);
|
|
|
|
void proto_reg_handoff_chdlc(void);
|
|
|
|
void proto_register_slarp(void);
|
|
|
|
void proto_reg_handoff_slarp(void);
|
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
static int proto_chdlc = -1;
|
|
|
|
static int hf_chdlc_addr = -1;
|
|
|
|
static int hf_chdlc_proto = -1;
|
2014-08-01 14:08:57 +00:00
|
|
|
static int hf_chdlc_clns_padding = -1;
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
|
|
|
static gint ett_chdlc = -1;
|
|
|
|
|
|
|
|
static int proto_slarp = -1;
|
|
|
|
static int hf_slarp_ptype = -1;
|
|
|
|
static int hf_slarp_address = -1;
|
2014-08-01 14:08:57 +00:00
|
|
|
static int hf_slarp_netmask = -1;
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
static int hf_slarp_mysequence = -1;
|
2013-01-31 17:55:31 +00:00
|
|
|
/* static int hf_slarp_yoursequence = -1; */
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
2014-08-01 14:08:57 +00:00
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
static gint ett_slarp = -1;
|
|
|
|
|
2001-11-26 04:52:51 +00:00
|
|
|
static dissector_handle_t data_handle;
|
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
/*
|
|
|
|
* Protocol types for the Cisco HDLC format.
|
|
|
|
*
|
|
|
|
* As per the above, according to RFC 1547, these are "standard 16 bit
|
|
|
|
* Ethernet protocol type code[s]", but 0x8035 is Reverse ARP, and
|
|
|
|
* that is (at least according to the Linux ISDN code) not the
|
|
|
|
* same as Cisco SLARP.
|
|
|
|
*
|
|
|
|
* In addition, 0x2000 is apparently the Cisco Discovery Protocol, but
|
|
|
|
* on Ethernet those are encapsulated inside SNAP with an OUI of
|
|
|
|
* OUI_CISCO, not OUI_ENCAP_ETHER.
|
|
|
|
*
|
2009-05-05 20:46:21 +00:00
|
|
|
* We thus have a separate dissector table for Cisco HDLC types.
|
|
|
|
* We could perhaps have that table hold only type values that
|
|
|
|
* wouldn't be in the Ethernet dissector table, and check that
|
|
|
|
* table first and the Ethernet dissector table if that fails.
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
*/
|
2012-04-24 18:27:06 +00:00
|
|
|
#define CISCO_SLARP 0x8035 /* Cisco SLARP protocol */
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
|
|
|
static dissector_table_t subdissector_table;
|
|
|
|
|
|
|
|
static const value_string chdlc_address_vals[] = {
|
2012-04-24 18:27:06 +00:00
|
|
|
{CHDLC_ADDR_UNICAST, "Unicast"},
|
|
|
|
{CHDLC_ADDR_MULTICAST, "Multicast"},
|
|
|
|
{0, NULL}
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
const value_string chdlc_vals[] = {
|
2012-04-24 18:27:06 +00:00
|
|
|
{0x2000, "Cisco Discovery Protocol"},
|
|
|
|
{ETHERTYPE_IP, "IP"},
|
|
|
|
{ETHERTYPE_IPv6, "IPv6"},
|
|
|
|
{CISCO_SLARP, "SLARP"},
|
|
|
|
{ETHERTYPE_DEC_LB, "DEC LanBridge"},
|
|
|
|
{CHDLCTYPE_BPDU, "Spanning Tree BPDU"},
|
|
|
|
{ETHERTYPE_ATALK, "Appletalk"},
|
|
|
|
{ETHERTYPE_AARP, "AARP"},
|
|
|
|
{ETHERTYPE_IPX, "Netware IPX/SPX"},
|
|
|
|
{ETHERTYPE_ETHBRIDGE, "Transparent Ethernet bridging" },
|
|
|
|
{CHDLCTYPE_OSI, "OSI" },
|
|
|
|
{ETHERTYPE_MPLS, "MPLS unicast"},
|
|
|
|
{ETHERTYPE_MPLS_MULTI, "MPLS multicast"},
|
|
|
|
{0, NULL}
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
void
|
2002-08-02 23:36:07 +00:00
|
|
|
capture_chdlc( const guchar *pd, int offset, int len, packet_counts *ld ) {
|
2003-08-26 05:52:53 +00:00
|
|
|
if (!BYTES_ARE_IN_FRAME(offset, len, 4)) {
|
2001-11-20 21:59:18 +00:00
|
|
|
ld->other++;
|
|
|
|
return;
|
|
|
|
}
|
2013-11-29 18:59:06 +00:00
|
|
|
switch (pntoh16(&pd[offset + 2])) {
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
case ETHERTYPE_IP:
|
2001-11-20 21:59:18 +00:00
|
|
|
capture_ip(pd, offset + 4, len, ld);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ld->other++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
2008-06-23 21:43:00 +00:00
|
|
|
chdlctype(guint16 chdlc_type, tvbuff_t *tvb, int offset_after_chdlctype,
|
2012-04-24 18:27:06 +00:00
|
|
|
packet_info *pinfo, proto_tree *tree, proto_tree *fh_tree,
|
|
|
|
int chdlctype_id)
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
{
|
2012-04-24 18:27:06 +00:00
|
|
|
tvbuff_t *next_tvb;
|
2014-08-01 14:08:57 +00:00
|
|
|
int padbyte;
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
2014-08-01 14:08:57 +00:00
|
|
|
proto_tree_add_uint(fh_tree, chdlctype_id, tvb,
|
2012-04-24 18:27:06 +00:00
|
|
|
offset_after_chdlctype - 2, 2, chdlc_type);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
2005-04-01 21:04:55 +00:00
|
|
|
padbyte = tvb_get_guint8(tvb, offset_after_chdlctype);
|
2008-06-23 21:43:00 +00:00
|
|
|
if (chdlc_type == CHDLCTYPE_OSI &&
|
2005-04-01 21:04:55 +00:00
|
|
|
!( padbyte == NLPID_ISO8473_CLNP || /* older Juniper SW does not send a padbyte */
|
|
|
|
padbyte == NLPID_ISO9542_ESIS ||
|
2008-03-04 21:05:21 +00:00
|
|
|
padbyte == NLPID_ISO10589_ISIS)) {
|
2004-05-02 21:35:42 +00:00
|
|
|
/* There is a Padding Byte for CLNS protocols over Cisco HDLC */
|
2014-12-13 17:52:20 +00:00
|
|
|
proto_tree_add_item(fh_tree, hf_chdlc_clns_padding, tvb, offset_after_chdlctype, 1, ENC_BIG_ENDIAN);
|
2009-08-16 12:36:22 +00:00
|
|
|
next_tvb = tvb_new_subset_remaining(tvb, offset_after_chdlctype + 1);
|
2004-05-02 21:35:42 +00:00
|
|
|
} else {
|
2009-08-16 12:36:22 +00:00
|
|
|
next_tvb = tvb_new_subset_remaining(tvb, offset_after_chdlctype);
|
2004-05-02 21:35:42 +00:00
|
|
|
}
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
|
|
|
/* do lookup with the subdissector table */
|
2010-12-20 05:35:29 +00:00
|
|
|
if (!dissector_try_uint(subdissector_table, chdlc_type, next_tvb, pinfo, tree)) {
|
2012-04-24 18:27:06 +00:00
|
|
|
col_add_fstr(pinfo->cinfo, COL_PROTOCOL, "0x%04x", chdlc_type);
|
2001-11-26 04:52:51 +00:00
|
|
|
call_dissector(data_handle,next_tvb, pinfo, tree);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2003-08-26 05:52:53 +00:00
|
|
|
static gint chdlc_fcs_decode = 0; /* 0 = No FCS, 1 = 16 bit FCS, 2 = 32 bit FCS */
|
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
static void
|
|
|
|
dissect_chdlc(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree)
|
|
|
|
{
|
|
|
|
proto_item *ti;
|
|
|
|
proto_tree *fh_tree = NULL;
|
2012-04-24 18:27:06 +00:00
|
|
|
guint8 addr;
|
|
|
|
guint16 proto;
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
2009-08-09 06:26:46 +00:00
|
|
|
col_set_str(pinfo->cinfo, COL_PROTOCOL, "CHDLC");
|
2009-08-09 07:36:13 +00:00
|
|
|
col_clear(pinfo->cinfo, COL_INFO);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
2003-01-06 22:10:49 +00:00
|
|
|
switch (pinfo->p2p_dir) {
|
|
|
|
|
|
|
|
case P2P_DIR_SENT:
|
2009-08-09 07:14:16 +00:00
|
|
|
col_set_str(pinfo->cinfo, COL_RES_DL_SRC, "DTE");
|
|
|
|
col_set_str(pinfo->cinfo, COL_RES_DL_DST, "DCE");
|
2003-01-06 22:10:49 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case P2P_DIR_RECV:
|
2009-08-09 07:14:16 +00:00
|
|
|
col_set_str(pinfo->cinfo, COL_RES_DL_SRC, "DCE");
|
|
|
|
col_set_str(pinfo->cinfo, COL_RES_DL_DST, "DTE");
|
2003-01-06 22:10:49 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
2009-08-09 07:14:16 +00:00
|
|
|
col_set_str(pinfo->cinfo, COL_RES_DL_SRC, "N/A");
|
|
|
|
col_set_str(pinfo->cinfo, COL_RES_DL_DST, "N/A");
|
2003-01-06 22:10:49 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
addr = tvb_get_guint8(tvb, 0);
|
|
|
|
proto = tvb_get_ntohs(tvb, 2);
|
|
|
|
|
|
|
|
if (tree) {
|
2011-10-21 02:10:19 +00:00
|
|
|
ti = proto_tree_add_item(tree, proto_chdlc, tvb, 0, 4, ENC_NA);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
fh_tree = proto_item_add_subtree(ti, ett_chdlc);
|
|
|
|
|
|
|
|
proto_tree_add_uint(fh_tree, hf_chdlc_addr, tvb, 0, 1, addr);
|
|
|
|
}
|
|
|
|
|
2003-08-26 05:52:53 +00:00
|
|
|
decode_fcs(tvb, fh_tree, chdlc_fcs_decode, 2);
|
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
chdlctype(proto, tvb, 4, pinfo, tree, fh_tree, hf_chdlc_proto);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
proto_register_chdlc(void)
|
|
|
|
{
|
|
|
|
static hf_register_info hf[] = {
|
|
|
|
{ &hf_chdlc_addr,
|
|
|
|
{ "Address", "chdlc.address", FT_UINT8, BASE_HEX,
|
2009-06-21 18:45:56 +00:00
|
|
|
VALS(chdlc_address_vals), 0x0, NULL, HFILL }},
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
{ &hf_chdlc_proto,
|
|
|
|
{ "Protocol", "chdlc.protocol", FT_UINT16, BASE_HEX,
|
2009-06-21 18:45:56 +00:00
|
|
|
VALS(chdlc_vals), 0x0, NULL, HFILL }},
|
2014-08-01 14:08:57 +00:00
|
|
|
{ &hf_chdlc_clns_padding,
|
|
|
|
{ "CLNS Padding", "chdlc.clns_padding", FT_UINT8, BASE_HEX,
|
|
|
|
NULL, 0x0, NULL, HFILL }},
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
};
|
2014-08-01 14:08:57 +00:00
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
static gint *ett[] = {
|
|
|
|
&ett_chdlc,
|
|
|
|
};
|
|
|
|
|
2003-08-26 05:52:53 +00:00
|
|
|
module_t *chdlc_module;
|
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
proto_chdlc = proto_register_protocol("Cisco HDLC", "CHDLC", "chdlc");
|
|
|
|
proto_register_field_array(proto_chdlc, hf, array_length(hf));
|
|
|
|
proto_register_subtree_array(ett, array_length(ett));
|
|
|
|
|
|
|
|
/* subdissector code */
|
2013-09-11 21:37:58 +00:00
|
|
|
subdissector_table = register_dissector_table("chdlc.protocol",
|
|
|
|
"Cisco HDLC protocol",
|
|
|
|
FT_UINT16, BASE_HEX);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
|
|
|
register_dissector("chdlc", dissect_chdlc, proto_chdlc);
|
2003-08-26 05:52:53 +00:00
|
|
|
|
|
|
|
/* Register the preferences for the chdlc protocol */
|
|
|
|
chdlc_module = prefs_register_protocol(proto_chdlc, NULL);
|
|
|
|
|
|
|
|
prefs_register_enum_preference(chdlc_module,
|
2012-04-24 18:27:06 +00:00
|
|
|
"fcs_type",
|
|
|
|
"CHDLC Frame Checksum Type",
|
|
|
|
"The type of CHDLC frame checksum (none, 16-bit, 32-bit)",
|
|
|
|
&chdlc_fcs_decode,
|
|
|
|
fcs_options, ENC_BIG_ENDIAN);
|
2003-08-26 05:52:53 +00:00
|
|
|
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
proto_reg_handoff_chdlc(void)
|
|
|
|
{
|
2001-12-03 04:00:26 +00:00
|
|
|
dissector_handle_t chdlc_handle;
|
|
|
|
|
2012-04-24 18:27:06 +00:00
|
|
|
data_handle = find_dissector("data");
|
2001-12-03 04:00:26 +00:00
|
|
|
chdlc_handle = find_dissector("chdlc");
|
2010-12-20 05:35:29 +00:00
|
|
|
dissector_add_uint("wtap_encap", WTAP_ENCAP_CHDLC, chdlc_handle);
|
|
|
|
dissector_add_uint("wtap_encap", WTAP_ENCAP_CHDLC_WITH_PHDR, chdlc_handle);
|
2014-11-09 02:08:52 +00:00
|
|
|
dissector_add_uint("juniper.proto", JUNIPER_PROTO_CHDLC, chdlc_handle);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
}
|
|
|
|
|
2012-04-24 18:27:06 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define SLARP_REQUEST 0
|
|
|
|
#define SLARP_REPLY 1
|
|
|
|
#define SLARP_LINECHECK 2
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
|
|
|
static const value_string slarp_ptype_vals[] = {
|
2012-04-24 18:27:06 +00:00
|
|
|
{SLARP_REQUEST, "Request"},
|
|
|
|
{SLARP_REPLY, "Reply"},
|
|
|
|
{SLARP_LINECHECK, "Line keepalive"},
|
|
|
|
{0, NULL}
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static void
|
|
|
|
dissect_slarp(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree)
|
|
|
|
{
|
|
|
|
proto_item *ti;
|
|
|
|
proto_tree *slarp_tree = NULL;
|
2012-04-24 18:27:06 +00:00
|
|
|
guint32 code;
|
|
|
|
guint32 addr;
|
|
|
|
guint32 mysequence;
|
|
|
|
guint32 yoursequence;
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
2009-08-09 06:26:46 +00:00
|
|
|
col_set_str(pinfo->cinfo, COL_PROTOCOL, "SLARP");
|
2009-08-09 07:36:13 +00:00
|
|
|
col_clear(pinfo->cinfo, COL_INFO);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
|
|
|
|
code = tvb_get_ntohl(tvb, 0);
|
|
|
|
|
|
|
|
if (tree) {
|
2011-10-21 02:10:19 +00:00
|
|
|
ti = proto_tree_add_item(tree, proto_slarp, tvb, 0, 14, ENC_NA);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
slarp_tree = proto_item_add_subtree(ti, ett_slarp);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (code) {
|
|
|
|
|
|
|
|
case SLARP_REQUEST:
|
|
|
|
case SLARP_REPLY:
|
2012-04-24 18:27:06 +00:00
|
|
|
addr = tvb_get_ipv4(tvb, 4);
|
|
|
|
col_add_fstr(pinfo->cinfo, COL_INFO, "%s, from %s, mask %s",
|
|
|
|
val_to_str(code, slarp_ptype_vals, "Unknown (%d)"),
|
|
|
|
get_hostname(addr), tvb_ip_to_str(tvb, 8));
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
if (tree) {
|
|
|
|
proto_tree_add_uint(slarp_tree, hf_slarp_ptype, tvb, 0, 4, code);
|
2011-09-26 09:01:17 +00:00
|
|
|
proto_tree_add_item(slarp_tree, hf_slarp_address, tvb, 4, 4, ENC_BIG_ENDIAN);
|
2014-08-01 14:08:57 +00:00
|
|
|
proto_tree_add_item(slarp_tree, hf_slarp_netmask, tvb, 8, 4, ENC_BIG_ENDIAN);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SLARP_LINECHECK:
|
|
|
|
mysequence = tvb_get_ntohl(tvb, 4);
|
|
|
|
yoursequence = tvb_get_ntohl(tvb, 8);
|
2012-04-24 18:27:06 +00:00
|
|
|
col_add_fstr(pinfo->cinfo, COL_INFO,
|
|
|
|
"%s, outgoing sequence %u, returned sequence %u",
|
|
|
|
val_to_str(code, slarp_ptype_vals, "Unknown (%d)"),
|
|
|
|
mysequence, yoursequence);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
if (tree) {
|
|
|
|
proto_tree_add_uint(slarp_tree, hf_slarp_ptype, tvb, 0, 4, code);
|
|
|
|
proto_tree_add_uint(slarp_tree, hf_slarp_mysequence, tvb, 4, 4,
|
2012-04-24 18:27:06 +00:00
|
|
|
mysequence);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
proto_tree_add_uint(slarp_tree, hf_slarp_mysequence, tvb, 8, 4,
|
2012-04-24 18:27:06 +00:00
|
|
|
yoursequence);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
2011-09-26 09:01:17 +00:00
|
|
|
col_add_fstr(pinfo->cinfo, COL_INFO, "Unknown packet type 0x%08X", code);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
if (tree) {
|
|
|
|
proto_tree_add_uint(slarp_tree, hf_slarp_ptype, tvb, 0, 4, code);
|
2009-08-16 12:36:22 +00:00
|
|
|
call_dissector(data_handle, tvb_new_subset_remaining(tvb, 4), pinfo,
|
2012-04-24 18:27:06 +00:00
|
|
|
slarp_tree);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
proto_register_slarp(void)
|
|
|
|
{
|
|
|
|
static hf_register_info hf[] = {
|
|
|
|
{ &hf_slarp_ptype,
|
|
|
|
{ "Packet type", "slarp.ptype", FT_UINT32, BASE_DEC,
|
From Kovarththanan Rajaratnam via bug 3548:
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
2009-06-18 21:30:42 +00:00
|
|
|
VALS(slarp_ptype_vals), 0x0, NULL, HFILL }},
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
{ &hf_slarp_address,
|
|
|
|
{ "Address", "slarp.address", FT_IPv4, BASE_NONE,
|
From Kovarththanan Rajaratnam via bug 3548:
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
2009-06-18 21:30:42 +00:00
|
|
|
NULL, 0x0, NULL, HFILL }},
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
/* XXX - need an FT_ for netmasks, which is like FT_IPV4 but doesn't
|
|
|
|
get translated to a host name. */
|
2014-08-01 14:08:57 +00:00
|
|
|
{ &hf_slarp_netmask,
|
|
|
|
{ "Netmask", "slarp.netmask", FT_IPv4, BASE_NONE,
|
|
|
|
NULL, 0x0, NULL, HFILL }},
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
{ &hf_slarp_mysequence,
|
|
|
|
{ "Outgoing sequence number", "slarp.mysequence", FT_UINT32, BASE_DEC,
|
From Kovarththanan Rajaratnam via bug 3548:
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
2009-06-18 21:30:42 +00:00
|
|
|
NULL, 0x0, NULL, HFILL }},
|
2013-01-31 17:55:31 +00:00
|
|
|
#if 0
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
{ &hf_slarp_yoursequence,
|
|
|
|
{ "Returned sequence number", "slarp.yoursequence", FT_UINT32, BASE_DEC,
|
From Kovarththanan Rajaratnam via bug 3548:
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
2009-06-18 21:30:42 +00:00
|
|
|
NULL, 0x0, NULL, HFILL }},
|
2013-01-31 17:55:31 +00:00
|
|
|
#endif
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
};
|
|
|
|
static gint *ett[] = {
|
2002-04-13 09:22:39 +00:00
|
|
|
&ett_slarp,
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
proto_slarp = proto_register_protocol("Cisco SLARP", "SLARP", "slarp");
|
|
|
|
proto_register_field_array(proto_slarp, hf, array_length(hf));
|
|
|
|
proto_register_subtree_array(ett, array_length(ett));
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
proto_reg_handoff_slarp(void)
|
|
|
|
{
|
2001-12-03 04:00:26 +00:00
|
|
|
dissector_handle_t slarp_handle;
|
|
|
|
|
|
|
|
slarp_handle = create_dissector_handle(dissect_slarp, proto_slarp);
|
2013-09-11 21:37:58 +00:00
|
|
|
dissector_add_uint("chdlc.protocol", CISCO_SLARP, slarp_handle);
|
Add a new Wiretap encapsulation type for Cisco HDLC. Map the NetBSD
DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
2001-03-15 09:11:03 +00:00
|
|
|
}
|
2014-09-28 23:25:09 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Editor modelines - http://www.wireshark.org/tools/modelines.html
|
|
|
|
*
|
|
|
|
* Local Variables:
|
|
|
|
* c-basic-offset: 2
|
|
|
|
* tab-width: 8
|
|
|
|
* indent-tabs-mode: nil
|
|
|
|
* End:
|
|
|
|
*
|
|
|
|
* ex: set shiftwidth=2 tabstop=8 expandtab:
|
|
|
|
* :indentSize=2:tabSize=8:noTabs=true:
|
|
|
|
*/
|