wireshark/config.nmake

# Some more information about the settings in this file can be found in
# the file README.windows and the Developer's Guide (available online).

##### Program name #####
# Changing the name is experimental and may break the installer/uninstaller and possibly other stuff.
# Application data will still be under the same dir as Wireshark so preference files, profiles, and etc
# will be shared with a "normal" Wireshark installation.
# Note that support libraries need to be in PROGRAM_NAME-libs...

!IFNDEF PROGRAM_NAME
PROGRAM_NAME=Wireshark
!ENDIF

##### Target platform #####

# Pick up the value from the environment, VS2012 onwards sets PLATFORM via
#  vcvarsall.bat (it appears for X64 only).
# For VS2010 and earlier you'll have to set the value yourself
!IF "$(PLATFORM)" == "X64"
WIRESHARK_TARGET_PLATFORM=win64
!ENDIF

# Only "win32" and "win64" are valid (for now).
# This can be defined in the system environment.
!IFNDEF WIRESHARK_TARGET_PLATFORM
WIRESHARK_TARGET_PLATFORM=win32
!ENDIF

##### Versions #####

# The VCS's description of our build. Updated by make-version.pl
VCS_REVISION=0

# The current Wireshark version. Recommended: Leave unchanged.
# Updated by make-version.pl
VERSION_MAJOR=1
VERSION_MINOR=99
VERSION_MICRO=6
VERSION_BUILD=$(VCS_REVISION)

# Local build information. Recommended: Unique string for your
# environment, e.g. "-JackStackBarbecue". Updated by make-version.pl
# Defaults to the environment variable WIRESHARK_VERSION_EXTRA

VERSION_EXTRA=$(WIRESHARK_VERSION_EXTRA)

# Banner shown at top right of Qt welcome screen.
!IFDEF WIRESHARK_VERSION_FLAVOR
VERSION_FLAVOR=$(WIRESHARK_VERSION_FLAVOR)
!ELSE
VERSION_FLAVOR=Development Build
!ENDIF

# The version of the wiretap library. Recommended: Leave unchanged.
WTAP_VERSION_MAJOR=$(VERSION_MAJOR)
WTAP_VERSION_MINOR=$(VERSION_MINOR)
WTAP_VERSION_MICRO=0

##### Directories #####

#
# Base directory, where your libraries reside, which are needed to
# compile the sources. This setting is used only inside this file.
# This can be defined in the system environment.
#
!IFNDEF WIRESHARK_LIB_DIR
!IFDEF WIRESHARK_BASE_DIR
WIRESHARK_LIB_DIR=$(WIRESHARK_BASE_DIR)\$(PROGRAM_NAME)-$(WIRESHARK_TARGET_PLATFORM)-libs
!ELSE
WIRESHARK_LIB_DIR=C:\$(PROGRAM_NAME)-$(WIRESHARK_TARGET_PLATFORM)-libs
!ENDIF
!ENDIF

#
# Base directory, where your programs reside.
# This setting is used only inside this file.
#
PROGRAM_FILES=$(PROGRAMFILES)
PROGRAM_FILES_W6432=$(PROGRAMW6432)

#
# Location of the "tools" directory. This affects the path to textify.ps1
!IFNDEF TOOLS_DIR
TOOLS_DIR=tools
!ENDIF

#
# Machine type for the compiler and linker
# TARGET_MACHINE (Used for link /MACHINE) should be one of "X86" or "X64"
# (sorry ARM, Alpha, MIPS, and Itanium fans).
# CPU (Used by win32.mak) should be one of "i386" or "AMD64".
# PROCESSOR_ARCHITECTURE (Used for redistributable packages and
# manifests) should be one of "x86" or "amd64".
!if "$(WIRESHARK_TARGET_PLATFORM)" == "win32"
TARGET_MACHINE=x86
CPU=i386
PROCESSOR_ARCHITECTURE=x86
!else if "$(WIRESHARK_TARGET_PLATFORM)" == "win64"
TARGET_MACHINE=x64
CPU=AMD64
PROCESSOR_ARCHITECTURE=amd64
!else
!error Your mysterious moon-man architecture "$(WIRESHARK_TARGET_PLATFORM)" frightens and confuses us.
!endif


##### Microsoft Visual C / Studio Variant #####

# Pick up the value from the environment, VS2012 onwards sets this via vcvarsall.bat
# For VS2010 and earlier you'll have to set the value yourself
# Assume that the lack of detection of Express editions doesn't matter
!IF "$(VISUALSTUDIOVERSION)" == "10.0"
MSVC_VARIANT=MSVC2010
!ELSE IF "$(VISUALSTUDIOVERSION)" == "11.0"
MSVC_VARIANT=MSVC2012
!ELSE IF "$(VISUALSTUDIOVERSION)" == "12.0"
MSVC_VARIANT=MSVC2013
!ENDIF

# For the different Studios, see: http://en.wikipedia.org/wiki/Microsoft_Visual_Studio
# Only one of the following MSVC_VARIANT settings should be used

# "Microsoft Visual Studio 2008"
# Visual C++ 9.0, _MSC_VER 1500, msvcr90.dll
#MSVC_VARIANT=MSVC2008

# "Microsoft Visual C++ 2008 Express Edition"
# Visual C++ 9.0, _MSC_VER 1500, msvcr90.dll
#MSVC_VARIANT=MSVC2008EE

# "Microsoft Visual Studio 2010"
# Visual C++ 10.0, _MSC_VER 1600, msvcr100.dll
#MSVC_VARIANT=MSVC2010

# "Microsoft Visual C++ 2010 Express Edition"
# Visual C++ 10.0, _MSC_VER 1600, msvcr100.dll
#MSVC_VARIANT=MSVC2010EE

# "Microsoft Visual C++ 2012 Express Edition"
# Visual C++ 11.0, _MSC_VER 1700, msvcr110.dll
## Notes:
##    1.  win32.mak is apparently not part of the MS 2012EE install;
##        To build Windows Wireshark, win32.mak must be obtained [*]
##        and copied to a dir specified in the Windows Environment
##        variable 'include' (or to a dir added to the list in 'include').
##        Note that the 'include' environment variable is initialized
##         when vcvarsall.bat is called to set up the build environment.
##        [*]One possibility: download the Windows 7 Platform SDK and copy
##         win32.mak from ...\Microsoft SDKs\Windows\v7.[something]\include
##         See: https://ask.wireshark.org/questions/14343/setting-development-project-under-visual-studio-2012
##    2. Dec 28,2012: "VS2012 Update 1" is required to use VS 2012 to build an .exe which
##        will run on Windows XP (as well as on later versions of Windows).
##        ToDo: It appears that some special setup is required to to do this.
##          https://blogs.msdn.com/b/vcblog/archive/2012/10/08/10357555.aspx
##
#MSVC_VARIANT=MSVC2012EE

# "Microsoft Visual Studio 2012"
# Visual C++ 11.0, _MSC_VER 1700, msvcr110.dll
#MSVC_VARIANT=MSVC2012

# "Microsoft Visual Studio 2013"
# Visual C++ 12.0, _MSC_VER 1800, msvcr120.dll
#MSVC_VARIANT=MSVC2013

# "Microsoft Visual Studio 2013 Express Edition"
# Visual C++ 12.0, _MSC_VER 1800, msvcr120.dll
##    Notes:
##    1.  win32.mak is apparently not part of the MS 2013EE install;
##        To build Windows Wireshark, win32.mak must be obtained [*]
##        and copied to a dir specified in the Windows Environment
##        variable 'include' (or to a dir added to the list in 'include').
##        Note that the 'include' environment variable is initialized
##         when vcvarsall.bat is called to set up the build environment.
##        [*]One possibility: download the Windows 7 Platform SDK and copy
##         win32.mak from ...\Microsoft SDKs\Windows\v7.[something]\include
##         See: https://ask.wireshark.org/questions/14343/setting-development-project-under-visual-studio-2012
#MSVC_VARIANT=MSVC2013EE

# The default if we haven't set a system environment variable or
# uncommented an entry above.  We default to the version recommended
# in the Developer's Guide, namely MSVC++ 2010 Express Edition.
!IFNDEF MSVC_VARIANT
MSVC_VARIANT=MSVC2010EE
!ENDIF

#
# Optional: To compile some time critical code from assembler instead of C
#
# If you have the NASM compiler, set this to the NASM executable.
# http://nasm.sourceforge.net/
#
# If you don't have NASM, comment this line out, so that NASM
# isn't defined.
#
NASM=$(WIRESHARK_LIB_DIR)\nasm-2.09.08\nasm.exe

#
# The Python interpreter is used as part of the buildsystem
#
# This will override the automatic detection below.
#PYTHON_VER=27
#PYTHON_DIR=C:\Python$(PYTHON_VER)

#
# If you don't have the native Python package installed, you can use
# the Cygwin version (not recommended)
#
#PYTHON=env python

# Santity check: native vs Cygwin Python options
!IF DEFINED(PYTHON) && DEFINED(PYTHON_DIR)
!ERROR PYTHON and PYTHON_DIR cannot be specified at the same time
!ENDIF

# Find native Python automatically if PYTHON(_DIR) wasn't defined
!IF !DEFINED(PYTHON) && !DEFINED(PYTHON_DIR)
!IF EXIST(c:\tools\python2\python.exe)
# Chocolatey default
PYTHON_DIR=C:\tools\python2
!ELSE IF EXIST(c:\Python27\python.exe)
PYTHON_VER=27
!ELSE IF EXIST(c:\Python26\python.exe)
PYTHON_VER=26
!ELSE IF EXIST(c:\Python25\python.exe)
PYTHON_VER=25
!ELSE IF EXIST(c:\Python24\python.exe)
PYTHON_VER=24
!ENDIF

!IF DEFINED(PYTHON_VER)
PYTHON_DIR=C:\Python$(PYTHON_VER)
!ENDIF
!ENDIF

!IF DEFINED(PYTHON_DIR)
PYTHON="$(PYTHON_DIR)\python.exe"
PATH=$(PYTHON_DIR);$(PATH)
!ENDIF

# If all else fails, try to find it on the PATH
!IF !DEFINED(PYTHON)
PYTHON=python
!ENDIF

#### Save files as pcap-ng by default. Comment out to use pcap instead. ####
PCAP_NG_DEFAULT=^#define PCAP_NG_DEFAULT 1

##### To Use packet editor uncomment this line ####
### Experimental - work in progress
WANT_PACKET_EDITOR=^#define WANT_PACKET_EDITOR 1

!if "$(WIRESHARK_TARGET_PLATFORM)" == "win32"
DOWNLOAD_TAG=2014-10-01
##### Win32 Libraries #####
#
# Mandatory: GLib settings
#
# Please note: Since Wireshark release 1.0.0, we no longer support GLib1.x
#
GLIB_VERSION=2.0

#
# Mandatory: GLib, GTK & related library settings
#
# Please note: Since Wireshark release 1.0.0, we no longer support GTK1.x
#
# If you want building with GTK+, set GTK_DIR to the pathname of the
# directory in which the "include" and "lib" directories reside.
#
# Set the name to gtk3 if you want to use gtk3
GTK_NAME=gtk2
GTK_DIR=$(WIRESHARK_LIB_DIR)\$(GTK_NAME)


# These macros are used by the nsis installer script and by the install target.
#EXPAT_DLL=libexpat-1.dll
FFI_DLL=libffi-6.dll
FONTCONFIG_DLL=libfontconfig-1.dll
FREETYPE_DLL=libfreetype-6.dll
INTL_DLL=libintl-8.dll
HARFBUZZ_DLL=libharfbuzz-0.dll
JASPER_DLL=libjasper-1.dll
JPEG_DLL=libjpeg-8.dll
LZMA_DLL=liblzma-5.dll
PIXMAN_DLL=libpixman-1-0.dll
PNG_DLL=libpng15-15.dll
SJLJ_DLL=libgcc_s_sjlj-1.dll
TIFF_DLL=libtiff-5.dll
XML_DLL=libxml2-2.dll

# This macro is used by the setup target.
!IF "$(GTK_NAME)" == "gtk2"
GDK_DLL=libgdk-win32-2.0-0.dll
GTK_DLL=libgtk-win32-2.0-0.dll
#GTK_PKG=2.24.10-2.7
GTK_PKG=2.24.23-1.1
PKG_SUFIX=ws
!ELSE
GDK_DLL=libgdk-3-0.dll
GTK_DLL=libgtk-3-0.dll
PKG_SUFIX=ws
GTK_PKG=3.4.4-2.1
#GTK_PKG=3.6.1-1.1
!ENDIF

#
# Mandatory: Version numbers of GTK and pango.
#
# (MAJOR + MINOR Version number but without MICRO version number)
# These macros are used by the nsis installer script and by the setup target.
#
!IF "$(GTK_NAME)" == "gtk2"
GTK_INST_VERSION=2.24
!ELSE
GTK_INST_VERSION=3.4
#GTK_INST_VERSION=3.6
!ENDIF

#
# Recommended: Qt
#
# This must point to a top-level Qt directory. QMake should be in
# $(QT5_BASE_DIR)\bin
#
# Qt's various paths are hardcoded but with care you can relocate your
# installation directory:
# http://stackoverflow.com/questions/913642/qmake-and-qt-install-prefix-how-can-i-select-a-new-location-for-qt-library
#
# NOTE> the qmake command given below returns a path with forward slashes,
#	which will need to be changed to backslashes for things to work properly
#QT5_BASE_DIR=output of "qmake -query QT_INSTALL_PREFIX"
!IF !DEFINED(QT5_BASE_DIR)
# Wireshark custom
!IF EXIST(C:\Qt\Qt-5.1.1-MSVC2010-$(WIRESHARK_TARGET_PLATFORM)-ws)
QT5_BASE_DIR=C:\Qt\Qt-5.1.1-MSVC2010-$(WIRESHARK_TARGET_PLATFORM)-ws
# Digia official
!ELSE IF EXIST(C:\Qt\Qt5.1.1\5.1.1\msvc2010)
QT5_BASE_DIR=C:\Qt\Qt5.1.1\5.1.1\msvc2010
# Qt 5.2.1 web installer default paths
!ELSE IF EXIST(C:\Qt\5.2.1\msvc2010)
QT5_BASE_DIR=C:\Qt\5.2.1\msvc2010
!ELSE IF EXIST(C:\Qt\5.2.1\msvc2012)
QT5_BASE_DIR=C:\Qt\5.2.1\msvc2012
!ELSE IF EXIST(C:\Qt\5.2.1\msvc2012_64)
QT5_BASE_DIR=C:\Qt\5.2.1\msvc2012_64
!ELSE IF EXIST(C:\Qt\Qt5.3.0\5.3\msvc2013)
QT5_BASE_DIR=C:\Qt\Qt5.3.0\5.3\msvc2013
!ELSE IF EXIST(C:\Qt\5.3\msvc2013)
QT5_BASE_DIR=C:\Qt\5.3\msvc2013
# Digia official, installed in $(WIRESHARK_LIB_DIR)
!ELSE IF EXIST($(WIRESHARK_LIB_DIR)\Qt5.1.1\5.1.1\msvc2010)
QT5_BASE_DIR=$(WIRESHARK_LIB_DIR)\Qt5.1.1\5.1.1\msvc2010
!ENDIF
!ENDIF

#
# Recommended: WinPcap developer's pack to capture network traffic.
#
# If you have the WinPcap developer's pack (at least version 3.0),
# set this to the directory in which the WinPcap developer's pack resides.
#
# If you don't have the WPdpack, comment this line out, so that
# PCAP_DIR isn't defined.
#
PCAP_DIR=$(WIRESHARK_LIB_DIR)\WPdpack
# This macro is used by the NSIS installer script, PortableApps, and by the
# setup target.
WINPCAP_VERSION=4_1_3
WPD_VERSION=4_1_2

#
# Optional: WinPcap remote capture support and new API
# (pcap_open(), pcap_findalldevs_ex(), etc.)
#
PCAP_REMOTE=1

#
# Optional: The ZLib enables unzipping of gzip compressed capture files
# "on the fly".
#
# If you have Zlib, set this to directory in which the Zlib headers
# and .lib file are stored.
#
# If you don't have Zlib, comment this line out, so that ZLIB_DIR isn't
# defined.
# EXperimental only use zlib 1.2.5 on win32 for now
ZLIB_DIR=$(WIRESHARK_LIB_DIR)\zlib125

#
# Optional: the ADNS library enables asynchronous (nonblocking) DNS
# name resolvings.
#
# If you have GNU ADNS, set this to the directory in which the GNU ADNS
# .lib file is stored.
#
# If you don't have GNU ADNS, comment this line out, so that ADNS_DIR
# isn't defined.
#
# If C_ARES_DIR is defined below, it will override this setting.
#
#ADNS_DIR=$(WIRESHARK_LIB_DIR)\adns-1.0-win32-05ws

#
# Optional: the c-ares library enables asynchronous (nonblocking) DNS
# name resolvings.
#
# If you have c-ares, set this to the directory in which the c-ares
# .lib file is stored. Setting this will override ADNS_DIR above. You
# can't have both.
#
# If you're using Visual C++ 6.0, you'll have to use a platform SDK that
# defines socklen_t, such as Windows Server 2003 PSDK.
#
# If you don't have c-ares, comment this line out, so that C_ARES_DIR
# isn't defined.
#
C_ARES_PKG=1.9.1-1

#
# Optional: the GnuTLS library enables ssl decryption.
#
# If you have the GnuTLS library, set this to the package version.
#
# If you don't have GnuTLS, comment this line out, so that GNUTLS_PKG
# isn't defined.
#
# Platform SDK conflicts with openssl.h header
GNUTLS_PKG=3.2.15-2.7
GPGERROR_DLL=libgpg-error-0.dll
GCC_DLL=libgcc_s_sjlj-1.dll

#
# Optional: the KFW library enables kerberos/sasl/dcerpc decryption.
#
# If you have the kerberos for windows (mit) library, set this to the
# directory where the kfw package is stored.
#
# If you don't have KFW, comment this line out, so that KFW_DIR
# isn't defined.
#
KFW_DIR=$(WIRESHARK_LIB_DIR)\kfw-3-2-2-i386-ws-vc6
COMERR_DLL=comerr32.dll
KRB5_DLL=krb5_32.dll
K5SPRT_DLL=k5sprt32.dll

# Optional: the LUA library enables scripting support.
#
# If you have the LUA library, set this to the directory in which
# the LUA package is stored.
#
# If you don't have LUA, comment this line out, so that LUA_DIR
# isn't defined.
#
!IF "$(MSVC_VARIANT)" == "MSVC2013" ||  "$(MSVC_VARIANT)" == "MSVC2013EE"
LUA_DIST=-5.2.3_Win32_dll12
!ELSEIF "$(MSVC_VARIANT)" == "MSVC2012" ||  "$(MSVC_VARIANT)" == "MSVC2012EE"
LUA_DIST=-5.2.3_Win32_dll11
!ELSE
LUA_DIST=-5.2.3_Win32_dll10
!ENDIF
LUA_DIR=$(WIRESHARK_LIB_DIR)\lua5.2.3

#
# Optional: the PORTAUDIO library enables audio output for RTP streams.
#
# If you have the PORTAUDIO library (used for rtp_player), set this to
# the directory in which the PORTAUDIO library is stored.
#
# If you don't have PORTAUDIO, comment this line out, so that
# PORTAUDIO_DIR isn't defined.
#
#PORTAUDIO_DIR=$(WIRESHARK_LIB_DIR)\portaudio_v18_1
PORTAUDIO_DIR=$(WIRESHARK_LIB_DIR)\portaudio_v19_2

#
# Version number of PortAudio
#
#PORTAUDIO_VERSION=18
PORTAUDIO_VERSION=19

#
# Optional: AirPcap developer's pack to capture wireless network traffic
# incl. 802.11 management frames.
#
# If you have the AirPcap developer's pack, set this to the directory
# in which the AirPcap developer's pack resides.
#
# If you don't have the AirPcap developer's pack, comment this line out,
# so that AIRPCAP_DIR isn't defined.
#
AIRPCAP_DIR=$(WIRESHARK_LIB_DIR)\AirPcap_Devpack_4_1_0_1622\AirPcap_Devpack

#
# Optional: LIBSMI, System Management Interface
#
# Used for oid-name resolution for SNMP and other protocols
#
SMI_PKG=svn-40773

#
# Optional: GeoIP, IP address database lookups
#
# Used to map IP addresses to MaxMind GeoIP database entries
#
GEOIP_PKG=1.5.1-2

#
# Optional: WinSparkle, software updates
#
# Used for automatic software updates
#
WINSPARKLE_PKG=0.3-44-g2c8d9d3-win32ws

!else
DOWNLOAD_TAG=2014-10-13
##### Win64 Libraries #####
#
# Mandatory: GLib settings
#
# Please note: Since Wireshark release 1.0.0, we no longer support GLib1.x
#
GLIB_VERSION=2.0

#
# Mandatory: GLib, GTK & related library settings
#
# Please note: Since Wireshark release 1.0.0, we no longer support GTK1.x
#
# If you want building with GTK+, set GTK_DIR to the pathname of the
# directory in which the "include" and "lib" directories reside.
#
#
# Set the name to gtk3 if you want to use gtk3 - (experimental ?)
GTK_NAME=gtk2
GTK_DIR=$(WIRESHARK_LIB_DIR)\$(GTK_NAME)

# These macros are used by the nsis installer script and by the install target.
#EXPAT_DLL=libexpat-1.dll
FFI_DLL=libffi-6.dll
FONTCONFIG_DLL=libfontconfig-1.dll
FREETYPE_DLL=libfreetype-6.dll
INTL_DLL=libintl-8.dll
HARFBUZZ_DLL=libharfbuzz-0.dll
JASPER_DLL=libjasper-1.dll
JPEG_DLL=libjpeg-8.dll
LZMA_DLL=liblzma-5.dll
PIXMAN_DLL=libpixman-1-0.dll
PNG_DLL=libpng16-16.dll
#SEH_DLL=libgcc_s_seh-1.dll
TIFF_DLL=libtiff-5.dll
XML_DLL=libxml2-2.dll

# These macros are used by the setup target.
!IF "$(GTK_NAME)" == "gtk2"
GDK_DLL=libgdk-win32-2.0-0.dll
GTK_DLL=libgtk-win32-2.0-0.dll
GTK_PKG=2.24.23-3.39
#GTK_PKG=2.24.23-1.1
PKG_SUFIX=ws
!ELSE
GDK_DLL=libgdk-3-0.dll
GTK_DLL=libgtk-3-0.dll
PKG_SUFIX=ws
GTK_PKG=3.4.4-2.1
#GTK_PKG=3.6.1-1.1
!ENDIF

#
# Mandatory: Version numbers of GTK and pango.
#
# (MAJOR + MINOR Version number but without MICRO version number)
# These macros are used by the nsis installer script and by the setup target.
#
!IF "$(GTK_NAME)" == "gtk2"
#GTK_INST_VERSION=2.16
GTK_INST_VERSION=2.24
!ELSE
#GTK_INST_VERSION=3.4
GTK_INST_VERSION=3.6
!ENDIF

#
# Recommended: Qt
#
# This must point to a top-level Qt directory. QMake should be in
# $(QT5_BASE_DIR)\bin
#
# Qt's various paths are hardcoded but with care you can relocate your
# installation directory:
# http://stackoverflow.com/questions/913642/qmake-and-qt-install-prefix-how-can-i-select-a-new-location-for-qt-library
#
#QT5_BASE_DIR=output of "qmake -query QT_INSTALL_PREFIX"
!IF !DEFINED(QT5_BASE_DIR)
# Wireshark custom
!IF EXIST(C:\Qt\Qt-5.1.1-MSVC2010-$(WIRESHARK_TARGET_PLATFORM)-ws)
QT5_BASE_DIR=C:\Qt\Qt-5.1.1-MSVC2010-$(WIRESHARK_TARGET_PLATFORM)-ws
# Digia official
!ELSE IF EXIST(C:\Qt\Qt5.1.1\5.1.1\msvc2010)
QT5_BASE_DIR=C:\Qt\Qt5.1.1\5.1.1\msvc2010
!ELSE IF EXIST(C:\Qt\5.3\msvc2013_64)
QT5_BASE_DIR=C:\Qt\5.3\msvc2013_64
# Digia official, installed in $(WIRESHARK_LIB_DIR)
!ELSE IF EXIST($(WIRESHARK_LIB_DIR)\Qt5.1.1\5.1.1\msvc2010)
QT5_BASE_DIR=$(WIRESHARK_LIB_DIR)\Qt5.1.1\5.1.1\msvc2010
!ENDIF
!ENDIF

#
# Recommended: WinPcap developer's pack to capture network traffic.
#
# If you have the WinPcap developer's pack (at least version 3.0),
# set this to the directory in which the WinPcap developer's pack resides.
#
# If you don't have the WPdpack, comment this line out, so that
# PCAP_DIR isn't defined.
#
PCAP_DIR=$(WIRESHARK_LIB_DIR)\WPdpack
# This macro is used by the NSIS installer script, PortableApps, and by the
# setup target.
WINPCAP_VERSION=4_1_3
WPD_VERSION=4_1_2

#
# Optional: WinPcap remote capture support and new API
# (pcap_open(), pcap_findalldevs_ex(), etc.)
#
PCAP_REMOTE=1

#
# Optional: The ZLib enables unzipping of gzip compressed capture files
# "on the fly".
#
# If you have Zlib, set this to directory in which the Zlib headers
# and .lib file are stored.
#
# If you don't have Zlib, comment this line out, so that ZLIB_DIR isn't
# defined.
#
ZLIB_DIR=$(WIRESHARK_LIB_DIR)\zlib125

#
# Optional: the ADNS library enables asynchronous (nonblocking) DNS
# name resolvings.
#
# If you have GNU ADNS, set this to the directory in which the GNU ADNS
# .lib file is stored.
#
# If you don't have GNU ADNS, comment this line out, so that ADNS_DIR
# isn't defined.
#
# If C_ARES_DIR is defined below, it will override this setting.
#
#ADNS_DIR=$(WIRESHARK_LIB_DIR)\adns-1.0-win32-05ws

#
# Optional: the c-ares library enables asynchronous (nonblocking) DNS
# name resolvings.
#
# If you have c-ares, set this to the directory in which the c-ares
# .lib file is stored. Setting this will override ADNS_DIR above. You
# can't have both.
#
# If you're using Visual C++ 6.0, you'll have to use a platform SDK that
# defines socklen_t, such as Windows Server 2003 PSDK.
#
# If you don't have c-ares, comment this line out, so that C_ARES_DIR
# isn't defined.
#
C_ARES_PKG=1.9.1-1

#
# Optional: the GnuTLS library enables ssl decryption.
#
# If you have the GnuTLS library, set this to the package version.
#
# If you don't have GnuTLS, comment this line out, so that GNUTLS_PKG
# isn't defined.
#
# Platform SDK conflicts with openssl.h header
GNUTLS_PKG=3.2.15-2.9
GPGERROR_DLL=libgpg-error6-0.dll
GCC_DLL=libgcc_s_seh-1.dll

#
# Optional: the KFW library enables kerberos/sasl/dcerpc decryption.
#
# If you have the kerberos for windows (mit) library, set this to the
# directory where the kfw package is stored.
#
# If you don't have KFW, comment this line out, so that KFW_DIR
# isn't defined.
#
KFW_DIR=$(WIRESHARK_LIB_DIR)\kfw-3-2-2-x64-ws
COMERR_DLL=comerr64.dll
KRB5_DLL=krb5_64.dll
K5SPRT_DLL=k5sprt64.dll

#
# Optional: the LUA library enables scripting support.
#
# If you have the LUA library, set this to the directory in which
# the LUA package is stored.
#
# If you don't have LUA, comment this line out, so that LUA_DIR
# isn't defined.
#
!IF "$(MSVC_VARIANT)" == "MSVC2013" ||  "$(MSVC_VARIANT)" == "MSVC2013EE"
LUA_DIST=-5.2.3_Win64_dll12
!ELSEIF "$(MSVC_VARIANT)" == "MSVC2012" ||  "$(MSVC_VARIANT)" == "MSVC2012EE"
LUA_DIST=-5.2.3_Win64_dll11
!ELSE
LUA_DIST=-5.2.3_Win64_dll10
!ENDIF
LUA_DIR=$(WIRESHARK_LIB_DIR)\lua5.2.3

#
# Optional: the PORTAUDIO library enables audio output for RTP streams.
#
# If you have the PORTAUDIO library (used for rtp_player), set this to
# the directory in which the PORTAUDIO library is stored.
#
# If you don't have PORTAUDIO, comment this line out, so that
# PORTAUDIO_DIR isn't defined.
#
#PORTAUDIO_DIR=$(WIRESHARK_LIB_DIR)\portaudio_v18_1
PORTAUDIO_DIR=$(WIRESHARK_LIB_DIR)\portaudio_v19_2

#
# Version number of PortAudio
#
#PORTAUDIO_VERSION=18
PORTAUDIO_VERSION=19

#
# Optional: AirPcap developer's pack to capture wireless network traffic
# incl. 802.11 management frames.
#
# If you have the AirPcap developer's pack, set this to the directory
# in which the AirPcap developer's pack resides.
#
# If you don't have the AirPcap developer's pack, comment this line out,
# so that AIRPCAP_DIR isn't defined.
#
AIRPCAP_DIR=$(WIRESHARK_LIB_DIR)\AirPcap_Devpack_4_1_0_1622\AirPcap_Devpack

#
# Optional: LIBSMI, System Management Interface
#
# Used for oid-name resolution for SNMP and other protocols
#
SMI_PKG=svn-40773

#
# Optional: GeoIP, IP address database lookups
#
# Used to map IP addresses to MaxMind GeoIP database entries
#
GEOIP_PKG=1.5.1-2

#
# Optional: WinSparkle, software updates
#
# Used for automatic software updates
#
WINSPARKLE_PKG=0.3-44-g2c8d9d3-win64ws

!endif
##### win32 / win64 #####

!IF "$(GTK_NAME)" == "gtk2"
GTK_ETC_DIR=etc\gtk-2.0
GTK_ENGINES_DIR=lib\gtk-2.0\$(GTK_LIB_DIR)\engines
GTK_MODULES_DIR=lib\gtk-2.0\modules
GTK_THEMES_DIR=share\themes\MS-Windows\gtk-2.0
!ELSE
GTK_ETC_DIR=etc\gtk-3.0
GTK_SCHEMAS_DIR=\share\glib-2.0\schemas
!ENDIF


##### Tools #####

# Set the following mandatory commands to find the tools.
# The easiest way is to use the corresponding packages from Cygwin.

# Set up the path to the Cygwin binaries
# First check whether a 32-bit Cygwin installation exists
# If not, check for a 64-bit Cygwin installation
!IF EXIST($(CYGWIN_PATH))
# Do nothing
!ELSE IF EXIST(C:\cygwin\bin)
CYGWIN_PATH=C:\cygwin\bin
!ELSE IF EXIST(C:\cygwin64\bin)
CYGWIN_PATH=C:\cygwin64\bin
!ELSE IF EXIST(C:\tools\cygwin\bin)
# Chocolatey default
CYGWIN_PATH=C:\tools\cygwin\bin
!ELSE
!ERROR Could not locate Cygwin, please set CYGWIN_PATH explicitly in config.nmake
!ENDIF

# command for a shell (cygwin's bash package recommended)
SH_PROG=bash

# bash versions after 3.1.6 need the 'igncr' shell option to be able to
#  process scripts in Windows 'native format' (dos crlf format).
# The following !IF results in the option being used only if it is available
#  since using it on bash version 3.1.6 (or earlier) is not required and
#  will cause an error message.
!if "$(SH_PROG)"=="bash" && [$(CYGWIN_PATH)\bash -c "set -o igncr" 2>nul: ] == 0
SH_FLAGS=-o igncr
!endif

SH=$(SH_PROG) $(SH_FLAGS)

# PowerShell
# Compatibility testing (...or should we always force version 2?)
#POWERSHELL=powershell -Version 2.0 -executionpolicy bypass -File
# Normal
POWERSHELL=powershell -executionpolicy bypass -File

# command for perl (cygwin's perl package recommended)
PERL=perl

# command for pod2man and pod2html
# (part of the perl package, usually leave these unchanged)
POD2MAN=$(SH) pod2man
POD2HTML=$(SH) pod2html

# command for sed (cygwin's sed recommended)
SED=sed

# Command for Flex. Cygwin's flex or Chocolatey's win_flex
# recommended.
# Absolute or relative paths must be Windows-style

#LEX=\custom\path\to\flex

# Find flex automatically
!IF !DEFINED(LEX)
!IF DEFINED(CHOCOLATEYINSTALL) && EXIST("$(CHOCOLATEYINSTALL)\bin\win_flex.exe")
LEX=$(CHOCOLATEYINSTALL)\bin\win_flex
!ELSE IF EXIST("$(CYGWIN_PATH)\flex.exe")
# We add Cygwin to PATH below.
LEX=flex
!ENDIF
!ENDIF

# Command for Bison. Cygwin's bison or Chocolatey's win_bison
# recommended.
# Absolute or relative paths must be Windows-style

#YACC=\custom\path\to\bison

# Find bison automatically
!IF !DEFINED(YACC)
!IF DEFINED(CHOCOLATEYINSTALL) && EXIST("$(CHOCOLATEYINSTALL)\bin\win_bison.exe")
YACC=$(CHOCOLATEYINSTALL)\bin\win_bison
!ELSE IF EXIST("$(CYGWIN_PATH)\bison.exe")
# We add Cygwin to PATH below.
YACC=bison
!ENDIF
!ENDIF

# Make our text files Windows-native
TEXTIFY=$(POWERSHELL) $(TOOLS_DIR)/textify.ps1

#
# Optional: Build the NSIS installer.
#
# If NSIS is installed in a standard location (under Program Files
# or Program Files (x86)) you shouldn't have to change anything.
#
# If NSIS is installed in a custom location uncomment the following
# line and adjust the path accordingly.
#

#MAKENSIS="\custom\path\to\NSIS\makensis.exe"

# Find NSIS automatically
!IF !DEFINED(MAKENSIS)
!IF EXIST("$(PROGRAM_FILES)\NSIS\makensis.exe")
MAKENSIS="$(PROGRAM_FILES)\NSIS\makensis.exe"
!ELSE IF EXIST("$(PROGRAM_FILES_W6432)\NSIS\makensis.exe")
MAKENSIS="$(PROGRAM_FILES_W6432)\NSIS\makensis.exe"
!ELSE IF EXIST("\Program Files (x86)\NSIS\makensis.exe")
MAKENSIS="\Program Files (x86)\NSIS\makensis.exe"
!ENDIF
!ENDIF

#
# Optional: Build the PortableApps package (WiresharkPortable).
#
# If you have the PortableApps.com Platform installed set this to the main
# PortableApps directory. In order to build packages you need to install
# "PortableApps.com Launcher" and "NSIS Portable (Unicode)" *within* the
# PortableApps environment.
#
# If you don't have the PortableApps.com Platform installed comment this line
# out.
#
PORTABLEAPPS_DIR="C:\PortableApps"

#
# Optional: To build the developers API documentation with doxygen and dot.
# Currently experimental, outdated and incomplete.
#
# You will have to download and install:
# Doxygen from: http://www.doxygen.org
# Graphviz from: http://www.research.att.com/sw/tools/graphviz/
#
# If you have doxygen, set this to the doxygen executable.
#
# If you don't want the developers documentation (or don't have the tools),
# comment this line out, so that DOXYGEN isn't defined.
#
#DOXYGEN="$(PROGRAM_FILES)/doxygen/bin/doxygen.exe"

#
# Recommended: Use the compressed html help format .chm as the Wireshark integrated help.
#
# The required htmlhelp.h and htmlhelp.lib should be included in versions of MSVC supported by Wireshark
#
# If you don't want the online help (or don't have the tools),
# comment this line out, so that HHC_DIR isn't defined.
#
HHC_DIR=$(PROGRAM_FILES)\HTML Help Workshop

#
# Optional: To reduce the size of dlls and exes, which is especially useful for
# USB device distributions (PortableApps)
#
# If you have the UPX package, set this to the upx.exe executable.
#
# UPX can be downloaded from:
#   http://upx.sourceforge.net/
#
# If you don't have UPX, or don't want to pack exes and dlls,
# comment this line out, so that UPX isn't defined.
#

UPX=$(WIRESHARK_LIB_DIR)\upx303w\upx.exe

##### Flags, PATHs and Miscellaneous #####

# "convert" the MSVC variant into the required MSC compiler version
!IF "$(MSVC_VARIANT)" == "MSVC2005" || "$(MSVC_VARIANT)" == "MSVC2005EE" || "$(MSVC_VARIANT)" == "DOTNET20"
MSC_VER_REQUIRED=1400
!ELSEIF "$(MSVC_VARIANT)" == "MSVC2008" ||  "$(MSVC_VARIANT)" == "MSVC2008EE"
MSC_VER_REQUIRED=1500
!ELSEIF "$(MSVC_VARIANT)" == "MSVC2010" ||  "$(MSVC_VARIANT)" == "MSVC2010EE"
MSC_VER_REQUIRED=1600
!ELSEIF "$(MSVC_VARIANT)" == "MSVC2012" ||  "$(MSVC_VARIANT)" == "MSVC2012EE"
MSC_VER_REQUIRED=1700
!ELSEIF "$(MSVC_VARIANT)" == "MSVC2013" ||  "$(MSVC_VARIANT)" == "MSVC2013EE"
MSC_VER_REQUIRED=1800
!ELSE
!ERROR MSVC_VARIANT unknown
!ENDIF

## Manifest processing is not needed for VC10 (Visual Studio 2010 C)
## See: http://msdn.microsoft.com/en-us/library/dd293574.aspx
!IF ($(MSC_VER_REQUIRED) >= 1400) && ($(MSC_VER_REQUIRED) < 1600)
MANIFEST_INFO_REQUIRED=1
!ENDIF

## VS2012 (VC11) and later: configure subsystem version
## See: https://blogs.msdn.com/b/vcblog/archive/2012/10/08/10357555.aspx
## (APPVER used in win32.mak to set subsystem version)
!IF ($(MSC_VER_REQUIRED) >= 1700)
!if "$(WIRESHARK_TARGET_PLATFORM)" == "win32"
APPVER=5.01
!else
APPVER=5.02
!endif
!ENDIF

# Compiler flags:
# /W3                               Warning level 3 (0 less - 4 most, 1 default).
# /Zi                               Create .pdb file for debugging.
# /MD                               Use "multithread- and DLL-specific version" of run-time libraries.
#                                    msvc documentation states that /MD causes _MT and _DLL to be defined
#                                    See: http://msdn.microsoft.com/en-us/library/2kzt1wy3%28v=VS.90%29.aspx
# /D_CRT_SECURE_NO_DEPRECATE        Don't warn for "insecure" calls;
#                                     see MSDN "Security Enhancements in the CRT".
# /D_CRT_NONSTDC_NO_DEPRECATE       Don't warn for "Deprecated CRT Functions" as MSDN calls this.
# /D_BIND_TO_CURRENT_CRT_VERSION=1  Make sure our CRT and manifest versions match.
#                                    (http://msdn.microsoft.com/en-us/library/cc664727.aspx)
# /DWIN32_LEAN_AND_MEAN             Don't include unnecessary Windows include files (see windows.h).
# /MANIFEST:no                      Don't create a SxS manifest. Makes sure our plugins don't load
#                                     a second copy of the CRT.
# -DPSAPI_VERSION=1                 Programs that must run on earlier versions of Windows as well as Windows 7 and later
#                                   versions should always call this function as GetProcessMemoryInfo. To ensure correct
#                                   resolution of symbols, add Psapi.lib to the TARGETLIBS macro and compile the program
#                                   with -DPSAPI_VERSION=1.To use run-time dynamic linking, load Psapi.dll.
#                                   http://msdn.microsoft.com/en-us/library/windows/desktop/ms683219(v=vs.85).aspx
# -DBUILD_WINDOWS                   Starting from VS2013, GetVersionEx is deprecated and we are recommended to use
#                                   VerifyVersionInfo instead
#                                   http://msdn.microsoft.com/en-us/library/windows/desktop/ms724429(v=vs.85).aspx
#                                   http://msdn.microsoft.com/en-us/library/windows/desktop/ms725491(v=vs.85).aspx
#                                   To continue to use GetVersionEx, we can define BUILD_WINDOWS
# -D_ALLOW_KEYWORD_MACROS           For VS2012 onwards the, C++ STL does not permit macro redefinitions of keywords
#                                   (see http://msdn.microsoft.com/en-us/library/bb531344(v=vs.110).aspx)
#                                   This definition prevents the complaint about the redefinition of inline by WinPCap
#                                   in pcap-stdinc.h when compiling CPP files, e.g. the QT UI
# /O2                               http://msdn.microsoft.com/en-us/library/8f8h5cxt.aspx
#                                   Specifying the /O2 compiler option is the same as using the following options:
#                                   /Ob (Inline Function Expansion), where the option parameter is 2 (/Ob2)
#                                   /Og (Global Optimizations)
#                                   /Oi (Generate Intrinsic Functions)
#                                   /Ot (Favor Fast Code)
#                                   /Oy (Frame-Pointer Omission)
#                                   /Gs (Control Stack Checking Calls))
#                                   /GF (Eliminate Duplicate Strings)
#                                   /Gy (Enable Function-Level Linking)
# /Zo                               Output debug info allowing debuggers to display local values and trace into inline
#                                   functions.  For VS2013 Update 3.  Assume all VS2013 builds are at least Update 3.
#                                   See http://msdn.microsoft.com/en-us/library/dn785163.aspx

##Note: LOCAL_CFLAGS are flags used for *all* compilations
##      STANDARD_CFLAGS (see below) are flags used just for *Wireshark* compilations
!IF "$(MSVC_VARIANT)" == "MSVC2005"   || \
        "$(MSVC_VARIANT)" == "MSVC2005EE" || \
        "$(MSVC_VARIANT)" == "DOTNET20"   || \
        "$(MSVC_VARIANT)" == "MSVC2008"   || \
        "$(MSVC_VARIANT)" == "MSVC2008EE" || \
        "$(MSVC_VARIANT)" == "MSVC2010"   || \
        "$(MSVC_VARIANT)" == "MSVC2010EE" || \
        "$(MSVC_VARIANT)" == "MSVC2012"   || \
        "$(MSVC_VARIANT)" == "MSVC2012EE" || \
        "$(MSVC_VARIANT)" == "MSVC2013"   || \
        "$(MSVC_VARIANT)" == "MSVC2013EE"
LOCAL_CFLAGS=/Zi /W3 /MD /O2 /DWIN32_LEAN_AND_MEAN /DMSC_VER_REQUIRED=$(MSC_VER_REQUIRED) \
	     /D_CRT_SECURE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE -DPSAPI_VERSION=1

!IF "$(MSVC_VARIANT)" == "MSVC2012"   || \
        "$(MSVC_VARIANT)" == "MSVC2012EE" || \
        "$(MSVC_VARIANT)" == "MSVC2013"   || \
        "$(MSVC_VARIANT)" == "MSVC2013EE"
LOCAL_CFLAGS=$(LOCAL_CFLAGS) /D_ALLOW_KEYWORD_MACROS
!ENDIF

!IF "$(MSVC_VARIANT)" == "MSVC2013"   || \
        "$(MSVC_VARIANT)" == "MSVC2013EE"
LOCAL_CFLAGS=$(LOCAL_CFLAGS) /DBUILD_WINDOWS /Zo
!ENDIF

!IF "$(WIRESHARK_TARGET_PLATFORM)" != "win64"
LOCAL_CFLAGS=$(LOCAL_CFLAGS) /D_BIND_TO_CURRENT_CRT_VERSION=1
!ENDIF

# Additional compiler warnings to be treated as "Level 3"
#  when compiling Wireshark sources. (Selected from "level 4" warnings).
## 4295: array is too small to include a terminating null character
## 4189: local variable is initialized but not referenced
WARNINGS_CFLAGS=/w34295 /w34189

!ELSE
!ERROR MSVC_VARIANT unknown
!ENDIF

# http://msdn.microsoft.com/en-us/library/bb385193.aspx
# /MP               Compiles multiple source files by using multiple processes
# /MP[processMax]   If you omit the processMax argument, the compiler retrieves the number of effective processors
#                   on your computer from the operating system, and creates a process for each processor.
#
# The following compiler options and language features that are incompatible with the /MP option:
#
# * #import preprocessor directive
# * /E, /EP
# * /Gm
# * /showIncludes
# * /Yc
#
!IF     "$(MSVC_VARIANT)" == "MSVC2008"   || \
        "$(MSVC_VARIANT)" == "MSVC2008EE" || \
        "$(MSVC_VARIANT)" == "MSVC2010"   || \
        "$(MSVC_VARIANT)" == "MSVC2010EE" || \
        "$(MSVC_VARIANT)" == "MSVC2012"   || \
        "$(MSVC_VARIANT)" == "MSVC2012EE" || \
        "$(MSVC_VARIANT)" == "MSVC2013"   || \
        "$(MSVC_VARIANT)" == "MSVC2013EE"
LOCAL_CFLAGS= $(LOCAL_CFLAGS) /MP
!ENDIF

# Optional: Static analysis. Only supported in the full-frontal MSVC editions.
# http://msdn.microsoft.com/en-us/library/ms182025.aspx

!IFDEF ENABLE_CODE_ANALYSIS
LOCAL_CFLAGS= $(LOCAL_CFLAGS) /analyze:WX-
!ENDIF

## Do *not* redefine LOCAL_CFLAGS below this point !!

#STANDARD_CFLAGS are flags used for *Wireshark* compiles (not stuff like lemon, etc)
STANDARD_CFLAGS=/DWINPCAP_VERSION=$(WINPCAP_VERSION) $(LOCAL_CFLAGS) $(WARNINGS_CFLAGS)

#Comment out the following if warnings are not to be treated as errors
WARNINGS_ARE_ERRORS=-WX

# Linker flags:
# /DEBUG  generate debug info
# /PROFILE generate map file(s) for profiling
# /DEFAULTLIB:xxx use xxx as the standard C library
# /NODEFAULTLIB:xxx don't use xxx as the standard C library
# /RELEASE set the checksum in the header, stops debugger complaints
#
LOCAL_LDFLAGS=/DEBUG /MACHINE:$(TARGET_MACHINE) /RELEASE
DLL_LDFLAGS =
!IFDEF MANIFEST_INFO_REQUIRED
DLL_LDFLAGS = /MANIFEST:no
!ENDIF

# Enable Safe Exception Handler.
# http://msdn.microsoft.com/en-us/magazine/cc337897.aspx
!IF $(MSC_VER_REQUIRED) >= 1300
!IF "$(WIRESHARK_TARGET_PLATFORM)" != "win64"
LOCAL_LDFLAGS= $(LOCAL_LDFLAGS) /SafeSEH
!ENDIF
!ENDIF

# Enable ASLR. Requires VS2008 or later.
# http://blogs.msdn.com/b/vcblog/archive/2009/05/21/dynamicbase-and-nxcompat.aspx
# DEP (/NXCompat) is handled in init_process_policies() via SetProcessDEPPolicy.

# ASLR http://msdn.microsoft.com/en-us/library/bb384887.aspx
!IF $(MSC_VER_REQUIRED) >= 1500
LOCAL_LDFLAGS= $(LOCAL_LDFLAGS) /DYNAMICBASE /FIXED:no
!ENDIF

PLUGIN_LDFLAGS = /NOLOGO /INCREMENTAL:no $(LOCAL_LDFLAGS) $(DLL_LDFLAGS)

#
# According to http://bugs.wireshark.org/bugzilla/show_bug.cgi?id=403
# XCOPY under Windows NT doesn't support the "/Y" flag.  This works
# around that bug.
# XXX - This apparently doesn't work for some versions of nmake:
# http://support.microsoft.com/default.aspx?scid=kb;en-us;86814
# It looks like we'll have to call "set copycmd=/y" before we run xcopy.
COPYCMD=/y

#
# If you don't want to build libwireshark.dll, you should comment out the
# following line. (Note: for plugin support this option must stay activated)
ENABLE_LIBWIRESHARK=USE

#
# install (debug) directory for Wireshark (relative to your source dir)
INSTALL_DIR=wireshark-gtk2
INSTALL_DIR_QT=wireshark-qt-release

##### C-Runtime Redistributable #####
#
# The C-Runtime since Version 7 must be shipped together with
# the program installer, to avoid missing msvcr*.dll files on
# the target machine.
#
# The location of these files differ on the various compiler
# packages, the following will use the default paths depending
# on the package version.
#

# You can either place the redistributable in its own platform-
# and compiler-specific directory or in the top-level library
# directory.
# Microsoft maintains a list of the latest redistributables in
# KB 20197667: http://support.microsoft.com/kb/2019667
!IF EXIST("$(WIRESHARK_LIB_DIR)\vcredist_$(MSVC_VARIANT)")
VCREDIST_DIR=$(WIRESHARK_LIB_DIR)\vcredist_$(MSVC_VARIANT)
!ELSE
VCREDIST_DIR=$(WIRESHARK_LIB_DIR)
!ENDIF

!IF "$(WIRESHARK_TARGET_PLATFORM)" == "win64"
#
# For 64-bit platforms, we don't create portable packages and therefore
# don't have to worry that "Using the Visual C++ Redistributable
# Package" requires that an installer be run to install that package,
# so we use that method to make the C runtime available.
#
VCREDIST_EXE=$(VCREDIST_DIR)\vcredist_$(TARGET_MACHINE).exe

!ELSEIF "$(MSVC_VARIANT)" == "MSVC2005"
#
# For MSVC 2005 non-Express Edition, we "Install a particular Visual C++
# assembly as a private assembly for the application", by copying
# the contents of the Microsoft.VC80.CRT folder to the target directory.
# This is done to reduce the size of the installer; it also makes
# a portable version work, as the C runtime doesn't have to be
# installed on the target machine.
#
MSVCR_DLL=$(VCINSTALLDIR)\redist\$(PROCESSOR_ARCHITECTURE)\Microsoft.VC80.CRT\*.*

!ELSEIF "$(MSVC_VARIANT)" == "MSVC2005EE" || "$(MSVC_VARIANT)" == "DOTNET20" || "$(MSVC_VARIANT)" == "MSVC2008EE"
#
# For MSVC 2005 Express Edition, for the .NET Framework 2.0 SDK, and
# for MSVC 2008 Express Edition, we "Use the Visual C++ Redistributable
# Package", because they don't provide the Microsoft.VC80.CRT folder.
#
# They also don't provide the redistributable package, so you need to
# download the appropriate version of the redistributable package,
# vcredist_x86.exe, vcredist_x64.exe, or vcredist_ia64.exe, from
# Microsoft first, and copy it to the lib folder!!!
#
VCREDIST_EXE=$(VCREDIST_DIR)\vcredist_$(TARGET_MACHINE).exe

!ELSEIF "$(MSVC_VARIANT)" == "MSVC2008"
#
# For MSVC 2008 non-Express Edition, we "Install a particular Visual C++
# assembly as a private assembly for the application", by copying
# the contents of the Microsoft.VC90.CRT folder to the target directory.
# This is done to reduce the size of the installer; it also makes
# a portable version work, as the C runtime doesn't have to be
# installed on the target machine.
#
MSVCR_DLL=$(VCINSTALLDIR)\redist\$(PROCESSOR_ARCHITECTURE)\Microsoft.VC90.CRT\*.*

!ELSEIF "$(MSVC_VARIANT)" == "MSVC2010EE"
#
# For MSVC 2010 Express Edition, we "Use the Visual C++ Redistributable
# Package", because it doesn't provide the Microsoft.VC80.CRT folder.
#
# It also doesn't provide the redistributable package, so you need to
# download the appropriate version of the redistributable package,
# vcredist_x86.exe or vcredist_x64.exe, from Microsoft first, and copy
# it to the lib folder!!!
VCREDIST_EXE=$(VCREDIST_DIR)\vcredist_$(TARGET_MACHINE).exe

!ELSEIF "$(MSVC_VARIANT)" == "MSVC2010"
#
# For MSVC 2010 non-Express Edition, we "Install a particular Visual C++
# assembly as a private assembly for the application", by copying
# the contents of the Microsoft.VC100.CRT folder to the target directory.
# This is done to reduce the size of the installer; it also makes
# a portable version work, as the C runtime doesn't have to be
# installed on the target machine.
#
# Note: for what it's worth, Microsoft recommends "Using the Visual C++
# Redistributable Package", rather than "Installing a particular Visual
# C++ assembly as a private assembly for the application", starting
# with Visual Studio 2010.
#
MSVCR_DLL=$(VCINSTALLDIR)\redist\$(TARGET_MACHINE)\Microsoft.VC100.CRT\*.*
!ELSEIF "$(MSVC_VARIANT)" == "MSVC2012" || "$(MSVC_VARIANT)" == "MSVC2012EE"
#
# EE version added as per bug https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9227
#
# For MSVC 2012, we "Install a particular Visual C++
# assembly as a private assembly for the application", by copying
# the contents of the Microsoft.VC110.CRT folder to the target directory.
# This is done to reduce the size of the installer; it also makes
# a portable version work, as the C runtime doesn't have to be
# installed on the target machine.
#
# Note: for what it's worth, Microsoft recommends "Using the Visual C++
# Redistributable Package", rather than "Installing a particular Visual
# C++ assembly as a private assembly for the application", starting
# with Visual Studio 2010.
#
MSVCR_DLL=$(VCINSTALLDIR)\redist\$(TARGET_MACHINE)\Microsoft.VC110.CRT\*.*
!ELSEIF "$(MSVC_VARIANT)" == "MSVC2013" || "$(MSVC_VARIANT)" == "MSVC2013EE"
#
# EE version added as per bug https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9227
#
# For MSVC 2013, we "Install a particular Visual C++
# assembly as a private assembly for the application", by copying
# the contents of the Microsoft.VC120.CRT folder to the target directory.
# This is done to reduce the size of the installer; it also makes
# a portable version work, as the C runtime doesn't have to be
# installed on the target machine.
#
# Note: for what it's worth, Microsoft recommends "Using the Visual C++
# Redistributable Package", rather than "Installing a particular Visual
# C++ assembly as a private assembly for the application", starting
# with Visual Studio 2010.
#
MSVCR_DLL=$(VCINSTALLDIR)\redist\$(TARGET_MACHINE)\Microsoft.VC120.CRT\*.*
!ELSE
!ERROR MSVC_VARIANT unknown
!ENDIF

# This is still optional yet we define it above for all users.
# So, don't check if it exists...
#!IF DEFINED(VCREDIST_EXE) && ! EXIST("$(VCREDIST_EXE)")
#!ERROR Can't find $(VCREDIST_EXE). Have you downloaded it from Microsoft? \
#See the developer's guide section "C-Runtime "Redistributable" files" for details how to get it
#!ENDIF

##### Advanced: Docbook/XML documentation generation #####
# If you want to generate the Docbook/XML based docs (User's and Developer's
# Guide, ...), you'll need some additional tools / libraries compared to the
# rest of the build process.
#
# FOR DETAILED INSTRUCTIONS TO GENERATE THE DOCS, SEE: docbook\README.txt.
#
# If you don't call the Makefile.nmake in the docbook dir to generate the
# docs, the following settings in this section will have no effect.

# formatting objects processor executable
# Comment this out if you don't have fop installed or you don't want the docs
# in PDF format.
#
# You may want to install the FOP hyphenation patterns from
# http://offo.sourceforge.net/hyphenation/
!IFNDEF FOP

!IF EXIST(docbook\fop-1.1\fop.bat)
FOP=fop-1.1\fop.bat
!ELSE IF EXIST($(WIRESHARK_LIB_DIR)\fop-1.1\fop.bat)
FOP=$(WIRESHARK_LIB_DIR)\fop-1.1\fop.bat
!ELSE IF EXIST(docbook\fop-1.0\fop.bat)
FOP=fop-1.0\fop.bat
!ELSE IF EXIST($(WIRESHARK_LIB_DIR)\fop-1.0\fop.bat)
FOP=$(WIRESHARK_LIB_DIR)\fop-1.0\fop.bat
!ENDIF

!ENDIF FOP

# Additional options to fop.
FOP_OPTS=-Xmx256m

# the XSL processor (part of cygwin's libxslt package)
XSLTPROC="xsltproc"

# the XML validator (part of cygwin's libxml2 package)
XMLLINT="xmllint"

# Asciidoc converter (part of cygwin's asciidoc package). In order to build
# the release notes you must have the Cygwin asciidoc and lynx packages
# installed.
A2X=a2x
LYNX=lynx

##############################################################################
#
# You should not have to change anything below this comment.
# If you do, it's a deficiency in the Makefile.nmake files;
# either tell wireshark-dev@wireshark.org about it, including
# details of why you had to change it, or fix config.nmake
# and any Makefile.nmake files that need to be changed, and
# send us the patches, along with details of why the change
# was necessary.
#
##############################################################################

#
# The RC_VERSION should be comma-separated, not dot-separated,
# as per Graham Bloice's message in
#
#	http://www.wireshark.org/lists/ethereal-dev/200303/msg00283.html
#
# "The RC_VERSION variable in config.nmake should be comma separated.
# This allows the resources to be built correctly and the version
# number to be correctly displayed in the explorer properties dialog
# for the executables, and XP's tooltip, rather than 0.0.0.0."
#

VERSION=$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_MICRO)$(VERSION_EXTRA)
RC_VERSION=$(VERSION_MAJOR),$(VERSION_MINOR),$(VERSION_MICRO),$(VERSION_BUILD)
PRODUCT_VERSION=$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_MICRO).$(VERSION_BUILD)

WTAP_VERSION=$(WTAP_VERSION_MAJOR).$(WTAP_VERSION_MINOR).$(WTAP_VERSION_MICRO)
RC_WTAP_VERSION=$(WTAP_VERSION_MAJOR),$(WTAP_VERSION_MINOR),$(WTAP_VERSION_MICRO)
FTAP_VERSION=$(FTAP_VERSION_MAJOR).$(FTAP_VERSION_MINOR).$(FTAP_VERSION_MICRO)
RC_FTAP_VERSION=$(FTAP_VERSION_MAJOR),$(FTAP_VERSION_MINOR),$(FTAP_VERSION_MICRO)

# GLib
GLIB_CFLAGS=/I$(GTK_DIR)\include\glib-$(GLIB_VERSION) \
	/I$(GTK_DIR)\lib\glib-$(GLIB_VERSION)\include \
	-DG_DISABLE_DEPRECATED \
	-DG_DISABLE_SINGLE_INCLUDES
GLIB_LIBS=$(GTK_DIR)\lib\glib-$(GLIB_VERSION).lib \
	$(GTK_DIR)\lib\gmodule-$(GLIB_VERSION).lib \
	$(GTK_DIR)\lib\gobject-$(GLIB_VERSION).lib

PROGRAM_NAME_GTK=$(PROGRAM_NAME)-gtk

# 2.18 was no good(Theming problem)
!IF "$(GTK_INST_VERSION)" == "2.24" || "$(GTK_INST_VERSION)" == "2.22" || "$(GTK_INST_VERSION)" == "2.16" || "$(GTK_INST_VERSION)" == "2.14"

# GTK+
GTK_CFLAGS=$(GLIB_CFLAGS) /I$(GTK_DIR)\include\gtk-2.0 \
	/I$(GTK_DIR)\include\gdk-pixbuf-2.0 \
	/I$(GTK_DIR)\lib\gtk-2.0\include \
	/I$(GTK_DIR)\include\atk-1.0 \
	/I$(GTK_DIR)\include\cairo \
	/I$(GTK_DIR)\include\pango-1.0 \
	-DGDK_DISABLE_DEPRECATED \
	-DGDK_PIXBUF_DISABLE_DEPRECATED \
	-DGTK_DISABLE_DEPRECATED \
	-DGTK_DISABLE_SINGLE_INCLUDES \
	-DGSEAL_ENABLE
GTK_LIBS=$(GTK_DIR)\lib\gtk-win32-2.0.lib \
	$(GTK_DIR)\lib\gdk-win32-2.0.lib \
	$(GTK_DIR)\lib\gdk_pixbuf-2.0.lib \
	$(GTK_DIR)\lib\cairo.lib \
	$(GTK_DIR)\lib\pango-1.0.lib \
	$(GTK_DIR)\lib\pangocairo-1.0.lib \
	$(GLIB_LIBS)

GTK_LIB_DIR=2.10.0

!IFDEF HARFBUZZ_DLL
NEED_HARFBUZZ_DLL=USE
!ENDIF
!IFDEF JPEG_DLL
NEED_JPEG_DLL=USE
!ENDIF
!IFDEF PNG_DLL
NEED_PNG_DLL=USE
!ENDIF
!IFDEF SEH_DLL
NEED_SEH_DLL=USE
!ENDIF
!IFDEF SJLJ_DLL
NEED_SJLJ_DLL=USE
!ENDIF
!IFDEF TIFF_DLL
NEED_TIFF_DLL=USE
!ENDIF
NEED_CAIRO_DLL=USE
# Pango >=1.24.5 Needs these:
#NEED_EXPAT_DLL=USE
NEED_FFI_DLL=USE
NEED_FONTCONFIG_DLL=USE
NEED_FREETYPE_DLL=USE
NEED_JASPER_DLL=USE
NEED_JPEG_DLL=USE
NEED_LZMA_DLL=USE
NEED_PIXMAN_DLL=USE
NEED_XML_DLL=USE

!ELSEIF "$(GTK_INST_VERSION)" == "3.4" || "$(GTK_INST_VERSION)" == "3.6"

# GTK+
## Note: If Wireshark is ever to be built with Gtk >= 3.10
##        then -DGTK_DISABLE_DEPRECATED must be removed
##        and -DGDK_DISABLE_DEPRECATION_WARNINGS must
##        be added below.
##       Wireshark changes to handle Gtk 3.10 deprecated features
##        will not be done since Wireshark is moving to Qt.
GTK_CFLAGS=$(GLIB_CFLAGS) /I$(GTK_DIR)\include\gtk-3.0 \
	/I$(GTK_DIR)\include\gdk-pixbuf-2.0 \
	/I$(GTK_DIR)\lib\gtk-3.0\include \
	/I$(GTK_DIR)\include\atk-1.0 \
	/I$(GTK_DIR)\include\cairo \
	/I$(GTK_DIR)\include\pango-1.0 \
	-DGDK_DISABLE_DEPRECATED \
	-DGDK_PIXBUF_DISABLE_DEPRECATED \
	-DGTK_DISABLE_DEPRECATED \
	-DGTK_DISABLE_SINGLE_INCLUDES \
	-DGSEAL_ENABLE
GTK_LIBS=$(GTK_DIR)\lib\gtk-3.lib \
	$(GTK_DIR)\lib\gdk-3.lib \
	$(GTK_DIR)\lib\gdk_pixbuf-2.0.lib \
	$(GTK_DIR)\lib\cairo.lib \
	$(GTK_DIR)\lib\pango-1.0.lib \
	$(GTK_DIR)\lib\pangocairo-1.0.lib \
	$(GLIB_LIBS)

GTK_LIB_DIR=3.4

!IFDEF _DLL
!ENDIF

NEED_CAIRO_GOBJECT_DLL=USE
NEED_CAIRO_DLL=USE

!IFDEF EXPAT_DLL
NEED_EXPAT_DLL=USE
!ENDIF
!IFDEF FFI_DLL
NEED_FFI_DLL=USE
!ENDIF
!IFDEF FONTCONFIG_DLL
NEED_FONTCONFIG_DLL=USE
!ENDIF
!IFDEF FREETYPE_DLL
NEED_FREETYPE_DLL=USE
!ENDIF
!IFDEF HARFBUZZ_DLL
NEED_HARFBUZZ_DLL=USE
!ENDIF
!IFDEF JASPER_DLL
NEED_JASPER_DLL=USE
!ENDIF
!IFDEF JPEG_DLL
NEED_JPEG_DLL=USE
!ENDIF
!IFDEF LZMA_DLL
NEED_LZMA_DLL=USE
!ENDIF
!IFDEF PIXMAN_DLL
NEED_PIXMAN_DLL=USE
!ENDIF
!IFDEF PNG_DLL
NEED_PNG_DLL=USE
!ENDIF
!IFDEF SEH_DLL
NEED_SEH_DLL=USE
!ENDIF
!IFDEF SJLJ_DLL
NEED_SJLJ_DLL=USE
!ENDIF
!IFDEF TIFF_DLL
NEED_TIFF_DLL=USE
!ENDIF
!IFDEF XML_DLL
NEED_XML_DLL=USE
!ENDIF
!ELSE
!ERROR ? Unknown or invalid GTK_INST_VERSION "$(GTK_INST_VERSION)"
!ENDIF


!IFDEF AIRPCAP_DIR
AIRPCAP_CONFIG=^#define HAVE_AIRPCAP 1
#AIRPCAP_CFLAGS=/I$(AIRPCAP_DIR)\include
!ELSE
AIRPCAP_CONFIG=
WIRELESS_TOOLBAR_CONFIG=
!ENDIF

!IFDEF PCAP_DIR
# Nmake uses carets to escape special characters
WINPCAP_CONFIG=^#define HAVE_LIBPCAP 1
#
# This requires that, if you're *building* Wireshark, you have
# the most recent WinPcap's development package.  If, at *run*
# time, an older version of WinPcap, missing some routines,
# is found, we work around that.
#
PCAP_FINDALLDEVS_CONFIG=^#define HAVE_PCAP_FINDALLDEVS 1
PCAP_DATALINK_NAME_TO_VAL_CONFIG=^#define HAVE_PCAP_DATALINK_NAME_TO_VAL 1
PCAP_DATALINK_VAL_TO_NAME_CONFIG=^#define HAVE_PCAP_DATALINK_VAL_TO_NAME 1
PCAP_DATALINK_VAL_TO_DESCRIPTION_CONFIG=^#define HAVE_PCAP_DATALINK_VAL_TO_DESCRIPTION 1
# PCAP_BREAKLOOP won't have any benefit on Win32, but breaks compatibility with 3.0
PCAP_BREAKLOOP_CONFIG=
PCAP_LIST_DATALINKS_CONFIG=^#define HAVE_PCAP_LIST_DATALINKS 1
PCAP_FREE_DATALINKS_CONFIG=^#define HAVE_PCAP_FREE_DATALINKS 1
PCAP_SET_DATALINK_CONFIG=^#define HAVE_PCAP_SET_DATALINK 1
PCAP_OPEN_DEAD_CONFIG=^#define HAVE_PCAP_OPEN_DEAD 1
BPF_IMAGE_CONFIG=^#define HAVE_BPF_IMAGE 1
!ELSE
# no WpdPack installed
WINPCAP_CONFIG=
PCAP_FINDALLDEVS_CONFIG=
PCAP_DATALINK_NAME_TO_VAL_CONFIG=
PCAP_DATALINK_VAL_TO_NAME_CONFIG=
PCAP_DATALINK_VAL_TO_DESCRIPTION_CONFIG=
PCAP_BREAKLOOP_CONFIG=
PCAP_LIST_DATALINKS_CONFIG=
PCAP_FREE_DATALINKS_CONFIG=
PCAP_SET_DATALINK_CONFIG=
PCAP_OPEN_DEAD_CONFIG=
BPF_IMAGE_CONFIG=
!ENDIF

!IF DEFINED(PCAP_DIR) && DEFINED(PCAP_REMOTE)
PCAP_HAVE_REMOTE_CONFIG=^#define HAVE_REMOTE 1
PCAP_REMOTE_CONFIG=^#define HAVE_PCAP_REMOTE 1
PCAP_OPEN_CONFIG=^#define HAVE_PCAP_OPEN 1
PCAP_SETSAMPLING_CONFIG=^#define HAVE_PCAP_SETSAMPLING 1
!ELSE
PCAP_HAVE_REMOTE_CONFIG=
PCAP_REMOTE_CONFIG=
PCAP_OPEN_CONFIG=
PCAP_SETSAMPLING_CONFIG=
!ENDIF

!IFDEF ZLIB_DIR
ZLIB_PATH=$(ZLIB_DIR)
ZLIB_CFLAGS=/I$(ZLIB_DIR)\include
ZLIB_LIBS=$(ZLIB_DIR)\lib\zdll.lib
ZLIB_DLL=$(ZLIB_DIR)\zlib1.dll
# Nmake uses carets to escape special characters
ZLIB_CONFIG=^#define HAVE_LIBZ 1
!else
ZLIB_CFLAGS=
ZLIB_LIBS=
ZLIB_DLL=
ZLIB_CONFIG=
!ENDIF

!IFDEF C_ARES_PKG
!UNDEF ADNS_DIR
C_ARES_DIR=$(WIRESHARK_LIB_DIR)\c-ares-$(C_ARES_PKG)-$(WIRESHARK_TARGET_PLATFORM)ws
C_ARES_CFLAGS=/I$(C_ARES_DIR)/include
C_ARES_LIBS=$(C_ARES_DIR)\lib\libcares-2.lib
C_ARES_DLL=$(C_ARES_DIR)\bin\libcares-2.dll
# Nmake uses carets to escape special characters
C_ARES_CONFIG=^#define HAVE_C_ARES 1
!else
C_ARES_CFLAGS=
C_ARES_LIBS=
C_ARES_CONFIG=
!IFDEF ADNS_DIR
ADNS_PATH=$(ADNS_DIR)\adns_win32\lib
ADNS_CFLAGS=/I$(ADNS_DIR)\src /I$(ADNS_DIR)\adns_win32
ADNS_LIBS=$(WIRESHARK_LIB_DIR)\$(MSVC_VARIANT)\adns\adns_dll.lib
ADNS_DLL=$(WIRESHARK_LIB_DIR)\$(MSVC_VARIANT)\adns\adns_dll.dll
# Nmake uses carets to escape special characters
ADNS_CONFIG=^#define HAVE_GNU_ADNS 1
!else
ADNS_CFLAGS=
ADNS_LIBS=
ADNS_CONFIG=
!ENDIF # ADNS
!ENDIF # C_ARES

!IFDEF KFW_DIR
KFW_PATH=$(KFW_DIR)\bin
KFW_CFLAGS=/I$(KFW_DIR)\include
!IF "$(WIRESHARK_TARGET_PLATFORM)" == "win32"
KFW_LIBS=$(KFW_DIR)\lib\krb5_32.lib
!ELSE
KFW_LIBS=$(KFW_DIR)\lib\krb5_64.lib
!ENDIF
# Nmake uses carets to escape special characters
KFW_CONFIG=^#define HAVE_MIT_KERBEROS 1
!else
KFW_CFLAGS=
KFW_LIBS=
KFW_CONFIG=
!ENDIF

!IFDEF GNUTLS_PKG
GNUTLS_DIR=$(WIRESHARK_LIB_DIR)\gnutls-$(GNUTLS_PKG)-$(WIRESHARK_TARGET_PLATFORM)ws
GNUTLS_PATH=$(GNUTLS_DIR)
# /DNOCRYPT avoids inclusion of Wincrypt.h, avoiding a X509_NAME define clash
GNUTLS_CFLAGS=/I$(GNUTLS_DIR)\include /DNOCRYPT /DIMPORT_LIGNUTLSDLL
GCRYPT_LIBS = $(GNUTLS_DIR)\bin\libgcrypt-20.lib
GNUTLS_LIBS=\
	$(GNUTLS_DIR)\bin\libtasn1-6.lib	\
!IF "$(WIRESHARK_TARGET_PLATFORM)" == "win32"
	$(GNUTLS_DIR)\bin\libgpg-error-0.lib	\
!ELSE
	$(GNUTLS_DIR)\bin\libgpg-error6-0.lib	\
!ENDIF
	$(GCRYPT_LIBS) \
	$(GNUTLS_DIR)\bin\libgnutls-28.lib
# Nmake uses carets to escape special characters
GNUTLS_CONFIG=^#define HAVE_LIBGNUTLS 1
LIBGCRYPT_CONFIG=^#define HAVE_LIBGCRYPT 1
!else
GNUTLS_CFLAGS=
GNUTLS_LIBS=
GNUTLS_CONFIG=
LIBGCRYPT_CONFIG=
!ENDIF

!IFDEF LUA_DIR
LUA_CFLAGS=/I$(LUA_DIR)\include
LUA_LIBS=$(LUA_DIR)\lua52.lib
# Nmake uses carets to escape special characters
LUA_CONFIG=^#define HAVE_LUA 1
LUA_VERSION=^#define HAVE_LUA 1
!else
LUA_CFLAGS=
LUA_LIBS=
LUA_CONFIG=
!ENDIF

!IFDEF PORTAUDIO_DIR
# Nmake uses carets to escape special characters
PORTAUDIO_CONFIG=^#define HAVE_LIBPORTAUDIO 1
!IF "$(PORTAUDIO_VERSION)" == "18"
# V18 uses API version 1 and v19 API version 2
PORTAUDIO_CFLAGS=/I$(PORTAUDIO_DIR)\pa_common
PORTAUDIO_API_CONFIG=^#define PORTAUDIO_API_1 1
!ELSE
PORTAUDIO_CFLAGS=/I$(PORTAUDIO_DIR)\include /I$(PORTAUDIO_DIR)\src\common /I$(PORTAUDIO_DIR)\src\os\win /DPA_NO_DS /DPA_NO_ASIO
!ENDIF
!ELSE
PORTAUDIO_CFLAGS=
PORTAUDIO_CONFIG=
!ENDIF

!IFDEF HHC_DIR
PATH=$(PATH);$(HHC_DIR)
HHC_EXE=hhc.exe
HHC_CFLAGS=-DHHC_DIR
HHC_LIBS=htmlhelp.lib
!ELSE
HHC_CFLAGS=
HHC_LIBS=
!ENDIF

!IFDEF SMI_PKG
SMI_DIR=$(WIRESHARK_LIB_DIR)\libsmi-$(SMI_PKG)-$(WIRESHARK_TARGET_PLATFORM)ws
SMI_CONFIG=^#define HAVE_LIBSMI 1
SMI_CFLAGS=/I$(SMI_DIR)\include
SMI_LIBS=$(SMI_DIR)\lib\libsmi-2.lib
!ENDIF

!IFDEF GEOIP_PKG
GEOIP_DIR=$(WIRESHARK_LIB_DIR)\GeoIP-$(GEOIP_PKG)-$(WIRESHARK_TARGET_PLATFORM)ws
GEOIP_CONFIG=^#define HAVE_GEOIP 1
GEOIP_V6_CONFIG=^#define HAVE_GEOIP_V6 1
GEOIP_CFLAGS=/I$(GEOIP_DIR)/include
GEOIP_LIBS=$(GEOIP_DIR)\lib\libGeoIP-1.lib
!ENDIF

!IFDEF WINSPARKLE_PKG
WINSPARKLE_DIR=$(WIRESHARK_LIB_DIR)\WinSparkle-$(WINSPARKLE_PKG)
WINSPARKLE_CONFIG=^#define HAVE_SOFTWARE_UPDATE 1
WINSPARKLE_CFLAGS=/I$(WINSPARKLE_DIR)
WINSPARKLE_LIBS=$(WINSPARKLE_DIR)\WinSparkle.lib
!ENDIF

!IFDEF ENABLE_LIBWIRESHARK
# Link plugins with the import library of libwireshark.dll
LINK_PLUGINS_WITH_LIBWIRESHARK=USE
!ELSE
LIBWIRESHARK_CONFIG=
!ENDIF

# Construct the path
PATH=$(PATH);$(CYGWIN_PATH);$(GTK_DIR)\bin;$(GETTEXT_DIR)\bin;$(ZLIB_PATH);$(ADNS_PATH)

INET6_CONFIG=^#define INET6 1

NTDDNDIS_CONFIG=^#define HAVE_NTDDNDIS_H 1