1998-09-16 02:39:15 +00:00
|
|
|
/* ethertype.c
|
|
|
|
* Routines for calling the right protocol for the ethertype.
|
|
|
|
*
|
Tvbuffify the IP, ICMP, TCP, UDP, OSI CLNP, OSI COTP, OSI CLTP, and OSI
ESIS dissectors.
Register the IP dissector and have dissectors that call it directly
(rather than through a port table) call it through a handle.
Add a routine "tvb_set_reported_length()" which a dissector can use if
it was handed a tvbuff that contains more data than is actually in its
part of the packet - for example, handing a padded Ethernet frame to IP;
the routine sets the reported length of the tvbuff (and also adjusts the
actual length, as appropriate). Then use it in IP.
Given that, "ethertype()" can determine how much of the Ethernet frame
was actually part of an IP datagram (and can do the same for other
protocols under Ethernet that use "tvb_set_reported_length()"; have it
return the actual length, and have "dissect_eth()" and "dissect_vlan()"
use that to mark trailer data in Ethernet II frames as well as in 802.3
frames.
svn path=/trunk/; revision=2658
2000-11-18 10:38:33 +00:00
|
|
|
* $Id: packet-ethertype.c,v 1.9 2000/11/18 10:38:24 guy Exp $
|
1998-09-16 03:22:19 +00:00
|
|
|
*
|
2000-01-22 06:22:44 +00:00
|
|
|
* Gilbert Ramirez <gram@xiexie.org>
|
1998-09-16 02:39:15 +00:00
|
|
|
*
|
|
|
|
* Ethereal - Network traffic analyzer
|
|
|
|
* By Gerald Combs <gerald@zing.org>
|
|
|
|
* Copyright 1998 Gerald Combs
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
* of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
|
|
# include "config.h"
|
|
|
|
#endif
|
|
|
|
|
1998-10-10 03:32:20 +00:00
|
|
|
#ifdef HAVE_SYS_TYPES_H
|
|
|
|
# include <sys/types.h>
|
|
|
|
#endif
|
|
|
|
|
1999-03-23 03:14:46 +00:00
|
|
|
#include <glib.h>
|
1998-09-27 22:12:47 +00:00
|
|
|
#include "packet.h"
|
2000-04-13 19:38:55 +00:00
|
|
|
#include "packet-ip.h"
|
|
|
|
#include "packet-ipx.h"
|
|
|
|
#include "packet-vlan.h"
|
|
|
|
#include "packet-vines.h"
|
1998-09-16 02:39:15 +00:00
|
|
|
#include "etypes.h"
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
|
|
|
|
static dissector_table_t ethertype_dissector_table;
|
1998-09-16 02:39:15 +00:00
|
|
|
|
1999-07-07 22:52:57 +00:00
|
|
|
const value_string etype_vals[] = {
|
2000-08-09 22:10:23 +00:00
|
|
|
{ETHERTYPE_IP, "IP" },
|
|
|
|
{ETHERTYPE_IPv6, "IPv6" },
|
|
|
|
{ETHERTYPE_X25L3, "X.25 Layer 3" },
|
|
|
|
{ETHERTYPE_ARP, "ARP" },
|
|
|
|
{ETHERTYPE_REVARP, "RARP" },
|
|
|
|
{ETHERTYPE_DEC_LB, "DEC LanBridge" },
|
|
|
|
{ETHERTYPE_ATALK, "Appletalk" },
|
|
|
|
{ETHERTYPE_AARP, "AARP" },
|
|
|
|
{ETHERTYPE_IPX, "Netware IPX/SPX" },
|
|
|
|
{ETHERTYPE_VINES, "Vines" },
|
|
|
|
{ETHERTYPE_TRAIN, "Netmon Train" },
|
|
|
|
{ETHERTYPE_LOOP, "Loopback" }, /* Ethernet Loopback */
|
|
|
|
{ETHERTYPE_PPPOED, "PPPoE Discovery" },
|
|
|
|
{ETHERTYPE_PPPOES, "PPPoE Session" },
|
|
|
|
{ETHERTYPE_VLAN, "802.1Q Virtual LAN" },
|
|
|
|
{ETHERTYPE_MPLS, "MPLS label switched packet" },
|
|
|
|
{ETHERTYPE_MPLS_MULTI, "MPLS multicast label switched packet" },
|
|
|
|
{ETHERTYPE_3C_NBP_DGRAM, "3Com NBP Datagram" },
|
|
|
|
{ETHERTYPE_DEC, "DEC proto" },
|
|
|
|
{ETHERTYPE_DNA_DL, "DEC DNA Dump/Load" },
|
|
|
|
{ETHERTYPE_DNA_RC, "DEC DNA Remote Console" },
|
|
|
|
{ETHERTYPE_DNA_RT, "DEC DNA Routing" },
|
|
|
|
{ETHERTYPE_LAT, "DEC LAT" },
|
|
|
|
{ETHERTYPE_DEC_DIAG, "DEC Diagnostics" },
|
|
|
|
{ETHERTYPE_DEC_CUST, "DEC Customer use" },
|
|
|
|
{ETHERTYPE_DEC_SCA, "DEC LAVC/SCA" },
|
|
|
|
{0, NULL } };
|
1998-11-03 07:45:10 +00:00
|
|
|
|
1999-02-09 00:35:38 +00:00
|
|
|
void
|
|
|
|
capture_ethertype(guint16 etype, int offset,
|
2000-01-23 08:55:37 +00:00
|
|
|
const u_char *pd, packet_counts *ld)
|
1999-02-09 00:35:38 +00:00
|
|
|
{
|
|
|
|
switch (etype) {
|
|
|
|
case ETHERTYPE_IP:
|
2000-01-23 08:55:37 +00:00
|
|
|
capture_ip(pd, offset, ld);
|
1999-02-09 00:35:38 +00:00
|
|
|
break;
|
1999-11-30 23:56:37 +00:00
|
|
|
case ETHERTYPE_IPX:
|
2000-01-23 08:55:37 +00:00
|
|
|
capture_ipx(pd, offset, ld);
|
1999-11-30 23:56:37 +00:00
|
|
|
break;
|
1999-12-05 20:05:45 +00:00
|
|
|
case ETHERTYPE_VLAN:
|
2000-01-23 08:55:37 +00:00
|
|
|
capture_vlan(pd, offset, ld);
|
1999-12-05 20:05:45 +00:00
|
|
|
break;
|
2000-01-20 21:34:16 +00:00
|
|
|
case ETHERTYPE_VINES:
|
2000-01-23 08:55:37 +00:00
|
|
|
capture_vines(pd, offset, ld);
|
2000-01-20 21:34:16 +00:00
|
|
|
break;
|
1999-02-09 00:35:38 +00:00
|
|
|
default:
|
|
|
|
ld->other++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Tvbuffify the IP, ICMP, TCP, UDP, OSI CLNP, OSI COTP, OSI CLTP, and OSI
ESIS dissectors.
Register the IP dissector and have dissectors that call it directly
(rather than through a port table) call it through a handle.
Add a routine "tvb_set_reported_length()" which a dissector can use if
it was handed a tvbuff that contains more data than is actually in its
part of the packet - for example, handing a padded Ethernet frame to IP;
the routine sets the reported length of the tvbuff (and also adjusts the
actual length, as appropriate). Then use it in IP.
Given that, "ethertype()" can determine how much of the Ethernet frame
was actually part of an IP datagram (and can do the same for other
protocols under Ethernet that use "tvb_set_reported_length()"; have it
return the actual length, and have "dissect_eth()" and "dissect_vlan()"
use that to mark trailer data in Ethernet II frames as well as in 802.3
frames.
svn path=/trunk/; revision=2658
2000-11-18 10:38:33 +00:00
|
|
|
guint
|
2000-05-19 04:54:36 +00:00
|
|
|
ethertype(guint16 etype, tvbuff_t *tvb, int offset_after_etype, packet_info *pinfo,
|
|
|
|
proto_tree *tree, proto_tree *fh_tree, int item_id)
|
1998-09-16 02:39:15 +00:00
|
|
|
{
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
char *description;
|
2000-05-19 04:54:36 +00:00
|
|
|
tvbuff_t *next_tvb;
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
|
|
|
|
/* Add to proto_tree */
|
|
|
|
if (tree) {
|
2000-05-31 05:09:07 +00:00
|
|
|
proto_tree_add_uint(fh_tree, item_id, tvb, offset_after_etype - 2, 2, etype);
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
}
|
|
|
|
|
Tvbuffify the IP, ICMP, TCP, UDP, OSI CLNP, OSI COTP, OSI CLTP, and OSI
ESIS dissectors.
Register the IP dissector and have dissectors that call it directly
(rather than through a port table) call it through a handle.
Add a routine "tvb_set_reported_length()" which a dissector can use if
it was handed a tvbuff that contains more data than is actually in its
part of the packet - for example, handing a padded Ethernet frame to IP;
the routine sets the reported length of the tvbuff (and also adjusts the
actual length, as appropriate). Then use it in IP.
Given that, "ethertype()" can determine how much of the Ethernet frame
was actually part of an IP datagram (and can do the same for other
protocols under Ethernet that use "tvb_set_reported_length()"; have it
return the actual length, and have "dissect_eth()" and "dissect_vlan()"
use that to mark trailer data in Ethernet II frames as well as in 802.3
frames.
svn path=/trunk/; revision=2658
2000-11-18 10:38:33 +00:00
|
|
|
/* Tvbuff for the payload after the Ethernet type. */
|
2000-05-19 04:54:36 +00:00
|
|
|
next_tvb = tvb_new_subset(tvb, offset_after_etype, -1, -1);
|
|
|
|
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
/* Look for sub-dissector */
|
Allow either old-style (pre-tvbuff) or new-style (tvbuffified)
dissectors to be registered as dissectors for particular ports,
registered as heuristic dissectors, and registered as dissectors for
conversations, and have routines to be used both by old-style and
new-style dissectors to call registered dissectors.
Have the code that calls those dissectors translate the arguments as
necessary. (For conversation dissectors, replace
"find_conversation_dissector()", which just returns a pointer to the
dissector, with "old_try_conversation_dissector()" and
"try_conversation_dissector()", which actually call the dissector, so
that there's a single place at which we can do that translation. Also
make "dissector_lookup()" static and, instead of calling it and, if it
returns a non-null pointer, calling that dissector, just use
"old_dissector_try_port()" or "dissector_try_port()", for the same
reason.)
This allows some dissectors that took old-style arguments and
immediately translated them to new-style arguments to just take
new-style arguments; make them do so. It also allows some new-style
dissectors not to have to translate arguments before calling routines to
look up and call dissectors; make them not do so.
Get rid of checks for too-short frames in new-style dissectors - the
tvbuff code does those checks for you.
Give the routines to register old-style dissectors, and to call
dissectors from old-style dissectors, names beginning with "old_", with
the routines for new-style dissectors not having the "old_". Update the
dissectors that use those routines appropriately.
Rename "dissect_data()" to "old_dissect_data()", and
"dissect_data_tvb()" to "dissect_data()".
svn path=/trunk/; revision=2218
2000-08-07 03:21:25 +00:00
|
|
|
if (!dissector_try_port(ethertype_dissector_table, etype,
|
|
|
|
next_tvb, pinfo, tree)) {
|
|
|
|
/* No sub-dissector found.
|
|
|
|
Label rest of packet as "Data" */
|
2000-11-16 07:35:43 +00:00
|
|
|
dissect_data(next_tvb, 0, pinfo, tree);
|
1999-06-22 22:02:39 +00:00
|
|
|
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
/* Label protocol */
|
|
|
|
switch(etype) {
|
Allow either old-style (pre-tvbuff) or new-style (tvbuffified)
dissectors to be registered as dissectors for particular ports,
registered as heuristic dissectors, and registered as dissectors for
conversations, and have routines to be used both by old-style and
new-style dissectors to call registered dissectors.
Have the code that calls those dissectors translate the arguments as
necessary. (For conversation dissectors, replace
"find_conversation_dissector()", which just returns a pointer to the
dissector, with "old_try_conversation_dissector()" and
"try_conversation_dissector()", which actually call the dissector, so
that there's a single place at which we can do that translation. Also
make "dissector_lookup()" static and, instead of calling it and, if it
returns a non-null pointer, calling that dissector, just use
"old_dissector_try_port()" or "dissector_try_port()", for the same
reason.)
This allows some dissectors that took old-style arguments and
immediately translated them to new-style arguments to just take
new-style arguments; make them do so. It also allows some new-style
dissectors not to have to translate arguments before calling routines to
look up and call dissectors; make them not do so.
Get rid of checks for too-short frames in new-style dissectors - the
tvbuff code does those checks for you.
Give the routines to register old-style dissectors, and to call
dissectors from old-style dissectors, names beginning with "old_", with
the routines for new-style dissectors not having the "old_". Update the
dissectors that use those routines appropriately.
Rename "dissect_data()" to "old_dissect_data()", and
"dissect_data_tvb()" to "dissect_data()".
svn path=/trunk/; revision=2218
2000-08-07 03:21:25 +00:00
|
|
|
|
|
|
|
case ETHERTYPE_LOOP:
|
|
|
|
if (check_col(pinfo->fd, COL_PROTOCOL)) {
|
|
|
|
col_add_fstr(pinfo->fd, COL_PROTOCOL, "LOOP");
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
if (check_col(pinfo->fd, COL_PROTOCOL)) {
|
|
|
|
col_add_fstr(pinfo->fd, COL_PROTOCOL, "0x%04x", etype);
|
|
|
|
}
|
|
|
|
break;
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
}
|
2000-05-19 04:54:36 +00:00
|
|
|
if (check_col(pinfo->fd, COL_INFO)) {
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
description = match_strval(etype, etype_vals);
|
|
|
|
if (description) {
|
2000-05-19 04:54:36 +00:00
|
|
|
col_add_fstr(pinfo->fd, COL_INFO, "%s", description);
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
Tvbuffify the IP, ICMP, TCP, UDP, OSI CLNP, OSI COTP, OSI CLTP, and OSI
ESIS dissectors.
Register the IP dissector and have dissectors that call it directly
(rather than through a port table) call it through a handle.
Add a routine "tvb_set_reported_length()" which a dissector can use if
it was handed a tvbuff that contains more data than is actually in its
part of the packet - for example, handing a padded Ethernet frame to IP;
the routine sets the reported length of the tvbuff (and also adjusts the
actual length, as appropriate). Then use it in IP.
Given that, "ethertype()" can determine how much of the Ethernet frame
was actually part of an IP datagram (and can do the same for other
protocols under Ethernet that use "tvb_set_reported_length()"; have it
return the actual length, and have "dissect_eth()" and "dissect_vlan()"
use that to mark trailer data in Ethernet II frames as well as in 802.3
frames.
svn path=/trunk/; revision=2658
2000-11-18 10:38:33 +00:00
|
|
|
|
|
|
|
/* Return the length of that tvbuff; the subdissector may have
|
|
|
|
reduced the length to a value specified by a length field
|
|
|
|
in its header, meaning what remains is padding. */
|
|
|
|
return tvb_reported_length(next_tvb);
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
}
|
1999-06-22 22:02:39 +00:00
|
|
|
|
|
|
|
|
Change the sub-dissector handoff registration routines so that the
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
2000-04-13 18:18:56 +00:00
|
|
|
void
|
|
|
|
proto_register_ethertype(void)
|
|
|
|
{
|
|
|
|
/* subdissector code */
|
|
|
|
ethertype_dissector_table = register_dissector_table("ethertype");
|
|
|
|
}
|