scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
#!/usr/bin/env python3
|
|
|
|
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# Copyright 2022 sysmocom - s.f.m.c. GmbH <info@sysmocom.de>
|
|
|
|
import importlib
|
|
|
|
import os
|
|
|
|
import shutil
|
|
|
|
import subprocess
|
|
|
|
import sys
|
|
|
|
import tempfile
|
2022-09-21 03:02:39 +00:00
|
|
|
import inspect
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
import lib.config
|
|
|
|
|
2023-03-15 10:48:33 +00:00
|
|
|
# Argparse result
|
|
|
|
args = None
|
|
|
|
|
|
|
|
# Print output of commands as they run, not only on error
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
cmds_verbose = False
|
|
|
|
|
|
|
|
|
|
|
|
def add_shared_arguments(parser):
|
2022-08-19 13:22:57 +00:00
|
|
|
""" Arguments shared between build_srcpkg.py and update_obs_project.py. """
|
2022-08-17 13:25:26 +00:00
|
|
|
parser.add_argument("-f", "--feed",
|
|
|
|
help="package feed (default: nightly). The feed"
|
|
|
|
" determines the git revision to be built:"
|
2022-09-23 10:29:26 +00:00
|
|
|
" 'nightly' and 'master' build 'origin/master',"
|
2022-08-17 13:25:26 +00:00
|
|
|
" 'latest' builds the last signed tag,"
|
|
|
|
" other feeds build their respective branch.",
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
metavar="FEED", default="nightly",
|
|
|
|
choices=lib.config.feeds)
|
2023-03-15 12:33:22 +00:00
|
|
|
parser.add_argument("-a", "--allow-unknown-package", action="store_true",
|
|
|
|
help="don't complain if the name of the package is not"
|
|
|
|
" stored in lib/config.py")
|
2022-08-16 23:20:29 +00:00
|
|
|
parser.add_argument("-b", "--git-branch", help="instead of using a branch"
|
|
|
|
" based on the feed, checkout this git branch",
|
|
|
|
metavar="BRANCH", default=None)
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
parser.add_argument("-d", "--docker",
|
|
|
|
help="run in docker to avoid installing required pkgs",
|
|
|
|
action="store_true")
|
2022-08-17 14:06:36 +00:00
|
|
|
parser.add_argument("-s", "--git-skip-fetch",
|
|
|
|
help="do not fetch already cloned git repositories",
|
|
|
|
action="store_false", dest="git_fetch")
|
2023-03-15 12:26:57 +00:00
|
|
|
parser.add_argument("-S", "--git-skip-checkout",
|
|
|
|
help="do not checkout and reset to a branch/tag",
|
|
|
|
action="store_false", dest="git_checkout")
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
parser.add_argument("-m", "--meta", action="store_true",
|
|
|
|
help="build a meta package (e.g. osmocom-nightly)")
|
2022-09-21 04:39:18 +00:00
|
|
|
parser.add_argument("-i", "--ignore-req", action="store_true",
|
|
|
|
help="skip required programs check")
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
parser.add_argument("-c", "--conflict-version", nargs="?",
|
|
|
|
help="Of the generated source packages, all Osmocom"
|
|
|
|
" packages (not e.g. open5gs, see lib/config.py"
|
|
|
|
" for full list) depend on a meta-package such as"
|
|
|
|
" osmocom-nightly, osmocom-latest, osmocom-2021q1"
|
|
|
|
" etc. These meta-packages conflict with each"
|
|
|
|
" other to ensure that one does not mix e.g."
|
|
|
|
" latest and nightly packages by accident."
|
|
|
|
" With this -c argument, it is possible to let"
|
|
|
|
" these packages depend on a meta-package of a"
|
|
|
|
" specific version. This is used for nightly and"
|
|
|
|
" 20YYqX packages to ensure they are not mixed"
|
|
|
|
" from different build dates (ABI compatibility"
|
|
|
|
" is only on latest).")
|
|
|
|
parser.add_argument("-v", "--verbose", action="store_true",
|
|
|
|
help="always print shell commands and their output,"
|
|
|
|
" instead of only printing them on error")
|
|
|
|
|
|
|
|
|
|
|
|
def set_cmds_verbose(new_val):
|
|
|
|
global cmds_verbose
|
|
|
|
cmds_verbose = new_val
|
|
|
|
|
|
|
|
|
2023-03-15 10:48:33 +00:00
|
|
|
def set_args(new_val):
|
|
|
|
global args
|
|
|
|
args = new_val
|
|
|
|
set_cmds_verbose(args.verbose)
|
|
|
|
|
|
|
|
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
def check_required_programs():
|
|
|
|
ok = True
|
|
|
|
|
|
|
|
for program in lib.config.required_programs:
|
|
|
|
if not shutil.which(program):
|
|
|
|
print(f"ERROR: missing program: {program}")
|
|
|
|
ok = False
|
|
|
|
|
|
|
|
for module in lib.config.required_python_modules:
|
|
|
|
if not importlib.find_loader(module):
|
|
|
|
print(f"ERROR: missing python3 module: {module}")
|
|
|
|
ok = False
|
|
|
|
|
|
|
|
if not ok:
|
|
|
|
print("Either install them or use the -d argument to run in docker")
|
|
|
|
exit(1)
|
|
|
|
|
|
|
|
|
2022-10-07 13:11:30 +00:00
|
|
|
def set_proper_package_name(package):
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
if package in lib.config.projects_osmocom:
|
2022-10-07 13:11:30 +00:00
|
|
|
return package
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
if package in lib.config.projects_other:
|
2022-10-07 13:11:30 +00:00
|
|
|
return package
|
|
|
|
|
|
|
|
# Add prefix to Osmocom package if missing
|
|
|
|
for package_cfg in lib.config.projects_osmocom:
|
|
|
|
if os.path.basename(package_cfg) == package:
|
|
|
|
return package_cfg
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
|
2023-03-15 12:33:22 +00:00
|
|
|
if lib.args.allow_unknown_package:
|
|
|
|
return package
|
|
|
|
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
print(f"ERROR: unknown package: {package}")
|
|
|
|
print("See packages_osmocom and packages_other in obs/lib/config.py")
|
|
|
|
exit(1)
|
|
|
|
|
|
|
|
|
|
|
|
def exit_error_cmd(completed, error_msg):
|
|
|
|
""" :param completed: return from run_cmd() below """
|
2022-09-19 14:03:16 +00:00
|
|
|
global cmds_verbose
|
|
|
|
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
print()
|
|
|
|
print(f"ERROR: {error_msg}")
|
|
|
|
print()
|
|
|
|
print(f"*** command ***\n{completed.args}\n")
|
|
|
|
print(f"*** returncode ***\n{completed.returncode}\n")
|
2022-09-19 14:03:16 +00:00
|
|
|
|
|
|
|
if not cmds_verbose:
|
|
|
|
print(f"*** output ***\n{completed.output}")
|
|
|
|
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
print("*** python trace ***")
|
|
|
|
raise RuntimeError("shell command related error, find details right above"
|
|
|
|
" this python trace")
|
|
|
|
|
|
|
|
|
|
|
|
def run_cmd(cmd, check=True, *args, **kwargs):
|
|
|
|
""" Like subprocess.run, but has check=True and text=True by default and
|
|
|
|
allows capturing the output while displaying it at the same time. By
|
|
|
|
default the output is hidden unless there's an error, with -v the
|
|
|
|
output gets written to stdout.
|
|
|
|
:returns: subprocess.CompletedProcess instance, but with combined
|
|
|
|
stdout + stderr written to ret.output
|
|
|
|
:param check: stop with error if exit code is not 0 """
|
|
|
|
global cmds_verbose
|
|
|
|
|
2022-09-21 03:02:39 +00:00
|
|
|
caller = inspect.stack()[2][3]
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
if cmds_verbose:
|
2022-09-21 03:02:39 +00:00
|
|
|
print(f"+ {caller}(): {cmd}")
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
|
|
|
|
with tempfile.TemporaryFile(encoding="utf8", mode="w+") as output_buf:
|
2022-09-21 13:36:34 +00:00
|
|
|
p = subprocess.Popen(cmd, stdin=subprocess.DEVNULL,
|
|
|
|
stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
|
|
|
|
text=True, bufsize=1, *args, **kwargs)
|
scripts/obs: rewrite pushing source pkgs to OBS
Harald requested that the OBS scripts should not stop if building one
specific source package fails, instead it should keep going and report
at the end a non-success exit code.
Given that the shell script code has historically grown and became hard
to maintain, I decided to rewrite the scripts for implementing this
feature. This rewrite solves additional problems:
* No full checkout of an OBS project like network:osmocom:latest
anymore, with lots of packages that won't get updated (e.g. the uhd
package has a uhd-images_3.14.1.1.tar.xz file that is 108 MB). With
the old code, developers had to wait minutes during the checkout
before the script reaches code that is currently being developed. Now
only single packages get checked out right before they get updated.
* No need to clone git repositories over and over. With the new code,
git repos only get cloned if needed (for latest it is not needed if
the remote git tag is the same as the version in OBS). During
development, the cloned git repositories are cached.
* Output from commands like "git tag -l" is not written to the log
unless they failed. This makes the log more readable, which is
especially important when a package fails to build, we keep going and
need to spot the build error in the middle of the log later on.
* No more duplicated code for nightly and latest scripts that worked
similar but had slight differences. Also the list of packages is not
duplicated for nightly and latest anymore; nightly uses all packages
and latest uses packages that have at least one git tag.
* Building source packages is decoupled from uploading them. A separate
script build_srcpkg.py can be used to just build the deb + rpm spec
source packages, without interacting with the OBS server.
* The scripts can optionally run in docker with a command-line switch,
and this is used by jenkins. This way we don't need to install
more dependencies on the host such as rebar3 which is now needed for
erlang/osmo_dia2gsup.
* Add erlang/osmo_dia2gsup and run its generate_build_dep.sh (SYS#6006)
I have done the new implementation in python to make use of argparse
and to be able to use try/except and print a trace when building one
package fails.
Example output:
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly_obs.osmocom.org/48/console
* https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/46/console
Change-Id: I45a555d05a9da808c0fe0145aae665f583cb80d9
2022-07-13 10:50:21 +00:00
|
|
|
|
|
|
|
while True:
|
|
|
|
out = p.stdout.read(1)
|
|
|
|
if out == "" and p.poll() is not None:
|
|
|
|
break
|
|
|
|
if out != "":
|
|
|
|
output_buf.write(out)
|
|
|
|
if cmds_verbose:
|
|
|
|
sys.stdout.write(out)
|
|
|
|
sys.stdout.flush()
|
|
|
|
|
|
|
|
output_buf.seek(0)
|
|
|
|
setattr(p, "output", output_buf.read())
|
|
|
|
|
|
|
|
if p.returncode == 0 or not check:
|
|
|
|
return p
|
|
|
|
|
|
|
|
exit_error_cmd(p, "command failed unexpectedly")
|
|
|
|
|
|
|
|
|
|
|
|
def remove_temp():
|
|
|
|
run_cmd(["rm", "-rf", lib.config.path_temp])
|
|
|
|
|
|
|
|
|
|
|
|
def remove_cache_extra_files():
|
|
|
|
""" dpkg-buildpackage outputs all files to the top dir of the package
|
|
|
|
dir, so it will always put them in _cache when building e.g. the debian
|
|
|
|
source package of _cache/libosmocore. Clear all extra files from _cache
|
|
|
|
that don't belog to the git repositories which we actually want to
|
|
|
|
cache. """
|
|
|
|
run_cmd(["find", lib.config.path_cache, "-maxdepth", "1", "-type", "f",
|
|
|
|
"-delete"])
|
|
|
|
|
|
|
|
|
|
|
|
def get_output_path(project):
|
|
|
|
return f"{lib.config.path_temp}/srcpkgs/{os.path.basename(project)}"
|