On systems with GNU/Linux kernel older than 3.17 (Debian 8 "jessie" for
example) the osmo_get_rand_id() would always return failure due to
missing getrandom() syscall.
To support such systems, let's add fallback code which uses GnuTLS
library. It can be disabled explicitly via '--disable-gnutls' option at
compile-time, otherwise ./configure will fail if both getrandom() and
GnuTLS are not available. When building with '--enable-embedded' the
fallback is disabled automatically.
Related: OS#1694
Change-Id: Ic77866ce65acf524b768882c751a4f9c0635740b
The patch seemed sensible, but introduces a segfault when hitting tab
on the interactive VTY. Reproduction example:
osmo-msc
telnet 127.0.0.1 4254
OsmoMSC> enable <TAB>
So we need to understand what that line of code actually intends to do.
Until then, revert this to avoid the segfault.
The segfault happens at:
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff7bc0894 in cmd_complete_command_real (vline=0x5555558d59e0, vty=0x5555558d57b0, status=0x7fffffffe024) at ../../../../src/libosmocore/src/vty/command.c:1953
1953 if (*(char *)vector_slot(vline, index) == '\0')
This reverts commit e9e9e427b7.
Change-Id: I3fe213bdfb96de9469aae64e67000dafee59302e
According to
https://www.gnu.org/software/automake/manual/automake.html#Libtool-Flags
the libraries supposed to be added to *_LDADD or *_LIBADD
while *_LDFLAGS should contain additional libtool linking
flags. Previously we used both. Let's unify this and move all the
libraries into proper automake variable. While at it - also add
libosmocore.la for tests to LDADD since all the tests link against it
anyway.
Change-Id: Ia657a66db75df831421af5df1175a992da5ba80f
If an application calls osmo_init_logging() multiple times, let's
bail out in a safe way without corrupting the state + returning an
error.
Change-Id: Icf337a430fb367bbca48a1b02822a2cb3b644e5f
osmo_bcd2char() has always supported both decimal and hex.
However, osmo_char2bcd() use to only implement decimal digits.
With this patch, it also suppots conversion of hex characters from ASCII
to BCD.
This would be relevant in cases where somebdoy would want to use 'code
11', 'code 12' or 'ST' signals in any addresses (SCCP GT e.g.)
Change-Id: I7bbcc6de08024567ab64765c12d7de71df787a7a
In Change-Id Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56 we introduced
a variable de-reference before we check if it's NULL.
Let's reorder the statements to avoid this.
Fixes: Coverity CID#178219
Change-Id: I99265a7ee76f85c479543c19ce8c05ce5d43ae69
The regular 'sh ns' lists all available NS. Sometimes it's handy to know
which of those are persistent.
* add "show ns persistent" command
* adjust parameters of dump-ns*() functions to use bool where
appropriate
Change-Id: Ib812864bae3ea414cc107a7b4f49bea4e6161795
The rate_ctr.c code would do this mangling automatically, but let's
avoid using this from new versions of our code for
simplicity/explicitness.
Change-Id: I24a556f447cfac25efb6e83cac2d0c2972d98fe3
As rate counters are automatically exposed on the CTRL interface,
we need to make sure they don't contain special characters such as '.'
which are not permitted/supported by CTRL.
In order to be able to run old versions of osmocom programs with
libosmocore versions after this commit, we introduce some special
name mangling: Any '.' in the names are replaced with ':' during
counter group registration, if valid identifiers can be obtained
this way.
Change-Id: Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56
Let's enforce that the names of FSMs and their instances are valid
osmocom identifiers. This is important as the FSMs are automatically
exported via those names on the CTRL inteface, and we have to make sure
CTRL syntax actually permits them.
Change-Id: I9ef59432f43a3cdb94e4cbb0c44ac3f9b2aac0f2
We define the notion of an 'osmocom identifier' which is basically a
7-bit US-ASCII without any special characters beyond "-_:@". We
introduce a function to verify if an identifier consists only of the
permitted characters.
Change-Id: I96a8d345c5a69238a12d040f39b70c485a5c421c
When dumping NSE via vty:
* check which local address would be used to communicate with a given
NSE and print it
* print link layer type last to make output more consistent
Change-Id: I6932a29c7899d36bcc275f05dda9670b0e69bef0
Related: SYS#3610
* add comment about underlying assumption that structs in ip/frgre union
members in gprs_nsvc struct have the same memory layout
* remove such assumption from gprs_ns_ll_str()
* use gprs_ns_ll_str() for NSE dump
Change-Id: Idcb912b7b3f7460fd2b058e16650c0bde8f757ee
This enables logging for every state transition which makes NS
troubleshooting easier.
Change-Id: I5d6eaef0432d9be810bf93d07e40787b9ca59142
Related: SYS#3610
* introduce defines with NS state names
* use them for vty and tests
* expand test output to print complete NS state
Change-Id: I69f8d536135ae76dbca623c2f1ffba625adcb1e9
Related: SYS#3610
Fixes the compilation warning below:
git/libosmocore/src/vty/command.c: In function ‘cmd_complete_command_real’:
git/libosmocore/src/vty/command.c:1953:33: warning: comparison between pointer and zero character const
ant [-Wpointer-compare]
if (vector_slot(vline, index) == '\0')
^~
git/libosmocore/src/vty/command.c:37:0:
git/libosmocore/include/osmocom/vty/vector.h:39:27: note: did you mean to dereference the pointer?
#define vector_slot(V,I) ((V)->index[(I)])
^
git/libosmocore/src/vty/command.c:1953:7: note: in expansion of macro ‘vector_slot’
if (vector_slot(vline, index) == '\0')
^~~~~~~~~~~
Change-Id: Iaba9e3450d68c51e16a7bda2fc0fc370992ca866
When listening for nsip connections is enabled, then every remote
host may send packets. This is useful for an SGSN that serves
multiple PCUs, but contraproductive for a PCU that awaits packets
from a single SGSN.
Add struct members remote_ip, and remote_port to struct gprs_ns_inst,
when set, then the listening end uses connect() to ensure that only
the expected host may send packets.
Related: OS#2401
Change-Id: Ifeb201d9006eec275a46708007ff342cdfc14e45
Old bitvec_set_uint() uses "unsigned int" as input parameter which
length is not guaranteed. It does not allow to specify which bit_value
to set and does not check for incorrect length. Overall this makes it
harder to re-use and more error-prone.
Let's replace it with extended implementation which uses fixed type
length parameters and extra checks. The additional parameter allows
caller to explicitly indicate the need to use L/H instead of 0/1 for bit
vector elements. It's necessary to properly encode some of the messages
from 3GPP TS 44.018, for example §10.5.2.16 IA Rest Octets.
The old function is left for backward compatibility as a tiny wrapper
around new function and will be deprecated in follow-up patches.
Change-Id: I1b670dacb55fb3063271d045f9faa10fccba10a6
Related: OS#1526
Add ctrl_interface_setup_dynip2() to add a node_count parameter, which can be
used to define more ctrl nodes without having to merge a patch to libosmocore.
In consequence, also add ctrl_handle_alloc2(), since
ctrl_interface_setup_dynip() uses ctrl_handle_alloc() to allocate the node
slots, and add node_count param to static ctrl_init().
Passing zero as node_count indicates to use the default of _LAST_CTRL_NODE as
before, i.e. to not define more ctrl nodes. Assert that we never allocate less
than _LAST_CTRL_NODE slots.
The current ctrl_interface_setup_dynip() and ctrl_handle_alloc() become simple
wrappers that pass zero as node_count. Their use is still valid and they do not
need to be deprecated.
The API comment to ctrl_interface_setup_dynip2() explains how to define more
node IDs.
This patch was verified to work by osmo-hlr.git change
I98ee6a06b3aa6a67adb868e0b63b0e04eb42eb50 which adds two node IDs for use by
osmo-hlr only.
Change-Id: I1bd62ae0d4eefde7e1517db15a2155640a1bab58
In some cases it is required to know the ip-address of the interface
through that a given remote IP-Address can be reached.
Add function osmo_sock_local_ip() to determine the local ip-address
for a given remote ip-address
Change-Id: I2988cc52b196fc8476703d1287e24cb4a48491c2
In ASCII string based protocols it a printf() version that prints
directly to the message buffer may be useful.
Add function msgb_printf(), make sure that msg buffer bounderies
are not exceeded. If the end of the tail buffer is hit, return
with an error code.
Change-Id: I15e1af68616309555d0ed9ac5da027c9833d42e3
Previously it would crash on NULL input. Let's handle it gracefully
instead. Corresponding test case is also added.
Change-Id: I587153e49d1c92128fac3ae5c124adba9592378e
Let's not put files of libosmovty into Doxygen groups of libosmocore,
as this seems to confuse Doxygen. Also, some minor updates/fixes
of libosmovty documentation.
Change-Id: I70e612b8d06aabefe634fcd7861641ffb941d974
This adds a more complete set of API documentation for all
osmo_counter relatedd functions and definitions.
Change-Id: I24283c05620ee86a8beb165af98a85d754549efb
The stat_item code base had some incomplete doxygen documentation
so far. Let's complete it, and at the same time fix some cosmetic
as well as copy+paste issues in the existing documentation bits.
Change-Id: Ib514c137b40bf7b9791bd74be99af0b65575f2b6
With stat_item, stats.c and stats_statsd.c, it is becoming a bit
difficult to understand file naming. Also, the 'statistics.c' file
actually only contained osmo_counter handling, so let's rename it to
counter.c altogether.
Change-Id: I2cfb2310543902b7da46cb15a76e2da317eaed7d
No callers that would pass NULL exist, but let's check against NULL from the
start.
Fixup for recent change I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522.
Change-Id: I111fbf29228929f2cd6ffa06bcb1f69da223224e
Max
Neels Hofmeyr
Harald Welte
Pau Espin
Philipp Maier