Let's use log_set_print_filename2() API instead, which has less ackward
behavior implications like changing the print status of category-hex.
Related: OS#5034
Change-Id: Ifc78e1dcba5baf0b41f6ccbbbd1e3f06552d73da
This will alow easily changing default values for print_category vs
print_category_hex later.
In any case, every test relying on logging output validation should
always explicitly state the config to avoid issues in the future if
default values change.
Related: OS#5034
Change-Id: If29b40557d5c2bcda04b964f344070bad58d8f28
This is a bit of a hack, as we want to maintain binary compatibility
without breaking existing users of libosmocore. To do so, we use the
'num_auth_vectors' field in two ways now:
* In the existing use case as part of SEND_AUTH_INFO_RESPONSE, it
indicates the number of vectors stored in the 'auth_vectors' field
* In the new use case as part of SEND_AUTH_INFO_REQUEST, it indicates
the number of vectors actually requested by the MSC/SGSN/MME.
Change-Id: Iaecc47280f8ce54f3e3a888c1cfc160735483d0f
OSMO_GSUP_SUPPORTED_RAT_TYPES_IE corresponds to the Supported RAT Types
Indicator from 3GPP TS 29.002. See 8.1.2 MAP_UPDATE_LOCATION service,
which indicates the capabilities of the MSC/VLR to the HLR.
So far, have room for eight RAT types in the gsup_msg. That is an arbitrary
random choice without any rationale.
OSMO_GSUP_CURRENT_RAT_TYPE_IE is useful to communicate the currently
used RAN / RAT type of the current subscriber during Location Updating Request.
Change-Id: I93850710ab55a605bf61b95063a69682a2899bb1
Based on a draft created by Neels, which is the result of reading a MAP
trace of two MSCs negotiating inter-MSC handovers, and of reading the
TS 29.002, TS 29.010 and related specs:
https://lists.osmocom.org/pipermail/openbsc/2019-January/012653.html
I figured out that the "Handover Number" mentioned in the specifications
is the same as the MSISDN IE that we already have, so we can use that
instead of creating a new IE (example usage in tests/gsup/gsup_test.c).
Create a new OSMO_GSUP_MSGT_E_ROUTING_ERROR message type, which the GSUP
server uses to tell a client that its message could not be forwarded to
the destination (see [1]). MAP has no related message.
[1]: Change-Id: Ia4f345abc877baaf0a8f73b8988e6514d9589bf5 (osmo-hlr.git)
Related: OS#3774
Change-Id: Ic00b0601eacff6d72927cea51767801142ee75db
osmo-msc and osmo-hlr have distinct subsystems handling incoming GSUP messages.
So far we decide entirely by message type which code path should handle a GSUP
message. Thus no GSUP message type may be re-used across subsystems.
If we add a GSUP message to indicate a routing error, it would have to be a
distinct message type for subscriber management, another one for SMS, another
one for USSD...
To allow introducing common message types, introduce a GSUP Message Class IE.
In the presence of this IE, GSUP handlers can trivially direct a received
message to the right code path. If it is missing, handlers can fall back to the
previous switch(message_type) method.
Change-Id: Ic397a9f2c4a7224e47cab944c72e75ca5592efef
Both session state and session ID IEs were left from the initial
version of Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71. There is
no need to use them (as we use SM-RP-MR), so let's clean up.
Change-Id: I0d910b87f15ffbc0aeeca9cb4fcbef32bdf3ef88
Implement necessary messages for Procedure Check_IMEI_VLR (TS 23.018
Chapter 7.1.2.9). This lets the VLR ask the EIR to check if an IMEI
is valid. In the Osmocom stack, we don't have an EIR and this request
will be handled by the HLR. We will be able to store the IMEI in the
HLR as side-effect (OS#2541).
This is roughly based on TS 29.002 8.7.1 MAP_CHECK_IMEI service, but
only implements the bare minimum required IEs (imei and imei_result).
Related: OS#3733
Change-Id: I085819df0ea7f3bfeb0cabebb5fd1942a23c6155
Simplify gsup_test.c by defining an end marker in gsup.h. No need to
manually update the last element every time anymore.
The C standard guarantees, that the end marker will have the last value
plus one: "Each subsequent enumerator with no = defines its enumeration
constant as the value of the constant expression obtained by adding 1 to
the value of the previous enumeration constant." (From C99: 6.7.2.2
Enumeration specifiers)
Change-Id: I2aab7245e209f0ebd2f33a83d4d181dd3339cb17
According to 3GPP TS 29.002, section 12.4, MAP-READY-FOR-SM is
used between the MSC and VLR as well as between the VLR and the
HLR to indicate that a subscriber has memory available for SMS.
This change replicates this service in GSUP as READY_FOR_SM_*.
The only mandatory IE for this service (excluding Invoke ID) is
'Alert Reason' that is replicated by OSMO_GSUP_SM_ALERT_RSN_IE.
Change-Id: Ic37f3b2114b8095cfce22977e67133b9103942e3
Related Change-Id: (docs) I549b6c8840a1e86caac09e77fb8bc5042d939e62
Related Change-Id: (TTCN) If2256607527ecfcb10285583332fb8b0515d7c78
Related: OS#3587
According to 3GPP TS 29.002, there are two services:
- MAP-MO-FORWARD-SHORT-MESSAGE (see 12.2),
- MAP-MT-FORWARD-SHORT-MESSAGE (see 12.9),
which are used to forward MO/MT short messages.
This change replicates both services as GSUP messages:
- OSMO_GSUP_MSGT_MO_FORWARD_SM_*,
- OSMO_GSUP_MSGT_MT_FORWARD_SM_*.
Please note, that only the 'must-have' IEs are introduced
by this change, in particular the following:
- OSMO_GSUP_SM_RP_MR_IE (see note below),
- OSMO_GSUP_SM_RP_DA_IE (see 7.6.8.1),
- OSMO_GSUP_SM_RP_OA_IE (see 7.6.8.2),
- OSMO_GSUP_SM_RP_UI_IE (see 7.6.8.4),
- OSMO_GSUP_SM_RP_MMS_IE (see 7.6.8.7),
- OSMO_GSUP_SM_RP_CAUSE_IE (see GSM TS 04.11, 8.2.5.4),
where both SM_RP_DA and SM_RP_OA IEs basically contain
a single nested TV of the following format:
- T: identity type (see 'osmo_gsup_sms_sm_rp_oda_t'),
- V: encoded identity itself (optional).
According to GSM TS 04.11, every single message on the SM-RL has
an unique message reference (see 8.2.3), that is used to link
an RP-ACK or RP-ERROR message to the associated (preceding)
RP-DATA or RP-SMMA message transfer attempt.
In case of TCAP/MAP, this message reference is being mapped to the
Invoke ID. But since GSUP has no 'Invoke ID' IE, and it is not
required for other applications (other than SMS), this change
introduces a special 'SM_RP_MR' IE that doesn't exist in MAP.
Change-Id: Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71
Related Change-Id: (docs) Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: (TTCN) Ibf49474a81235096c032ea21f217170f523bd94e
Related: OS#3587
In order to be able to transfer SS/USSD messages via GSUP,
this change introduces the following new message types:
- OSMO_GSUP_MSGT_PROC_SS_*,
and the following new IE:
- OSMO_GSUP_SS_INFO_IE
which represents an ASN.1 encoded MAP payload coming to/from
the mobile station 'as is', without any transcoding.
Change-Id: Ie17a78043a35fffbdd59e80fd2b2da39cce5e532
Related: OS#1597
Unlike TCAP/MAP, GSUP is just a transport layer without the
dialogue/context. This prevents us from having session based
communication, required e.g. for USSD. But we can emulate
TCAP dialogue by adding additional IEs, which would allow
to relate each message to a particular session.
This change introduces the following IEs:
- OSMO_GSUP_SESSION_ID_IE,
- OSMO_GSUP_SESSION_STATE_IE,
which optionally can be used to indicate that the message is
related to a session with given ID, and to manage session
state, i.e. initiate, continue, and finish.
Change-Id: I1cee271fed0284a134ffed103c0d4bebbcfde2a8
Related: OS#1597
Ironically, when deprecating osmo_init_logging() in
I216837780e9405fdaec8059c63d10699c695b360, I forgot to change the callers
within libosmocore itself, i.e. in the various regression tests.
Change-Id: Ia36c248f99353d5baaa2533f46a2f60a8579bdf8
* match return type of osmo_gsup_encode() with osmo_gsup_decode() to allow
propagating error to caller
* check return value of osmo_gsup_encode() in GSUP test
* return errors instead of braking app with aseert
Change-Id: Idaa1deecb6d9e15329bd51867b4f6a03357461f0
Related: OS#2864
Instead of forcing test failure via assert on first error encountered,
let it run until completion and print detailed error log. This
simplifies troubleshooting by letting user to see more errors from
single run and more details on each of the errors. Update test output
with explicit test results.
Change-Id: I016a28fe04f7b194e22c15e936095004c5f079d1
These fields can be in the ISD and the PDP Context inofmration. Store
pointers to this IE in both cases. It needs to be used by the SGSN
when opening a PDP context.
Change-Id: Iedc7c02adcf77ca5c9545119e19c968dfbbb3e6b
Configure logging to be deterministic and add stderr checking to testuite.at.
However, exclude the thousands of message modification log lines from the log
to not have a huge test expectation file.
Change-Id: I0dd7112967a64a168556b62e5ec15107b7608ffb
This would have caught the wrong expectation of AUTS' length fixed recently
(3a5ca647c5).
Besides AUTS, add AUTN, RES, CK, IK which were also not tested yet.
Change-Id: I6fddf8d7ce97137b0a585d365807bcaf90a319d0
Related: OS#1593
All DL* categories are typically negative, but DLGSUP isn't, and it's also not
in libosmocore's internal_cat array.
See: 3b6fb0880c
This means that a program using DLGSUP has to include DLGSUP in its own logging
cat array (typically not needed for DL* categories), which means for osmo-nitb
that DLGSUP (11) replaces DMGCP (also 11), and DMGCP becomes unusable.
Fix this: make DLGSUP -11 and include in internal_cat.
In gsup_test.c, no longer add DLGSUP to the logging categories array.
External follow-ups are otherwise needed only in osmo-hlr.git and some pending
patches for openbsc (Id3938267fa062e1a997d3704cd678874306f86ee).
Change-Id: Id974c7be158e4d60421a98110f5c807aefd31119
Move those routines from OpenBSC to libosmogsm, so they can be
re-used from other programs. I think it was a mistake to add them only
inside the openbsc repository in the first place. We need to pay more
attention to this in the future.
Pau Espin
Harald Welte
Neels Hofmeyr
Oliver Smith
Neels Hofmeyr