Currently sending SUSPEND/RESUME messages to this function (like it
is done in the osmo-sgsn) results in STATUS messages complaining
about an unknown BVCI. The reason is, that these messages rely on a
TLLI/RAI pair to identify the context and do not contain an explicit
BVCI.
This patch modifies bssgp_rcvmsg() to only complain about and unknown
BVCI if one is given but a matching context is not found (except for
RESET messages). The ctx argument is removed from the functions
handling SUSPEND and RESUME since it will always be NULL then.
Sponsored-by: On-Waves ehf
In the OsmoSGSN we have a crash with a DEAD/BLOCKED GPRS-NS and
segmented SN-UNITDATA. For the caller it is not easy to know if
the passed msg buffer has been freed or not. The most easy solution
is to always take the ownership and either pass it on or free it
in case of an error.
Adjust indirect and direct callers of gprs_ns_sendmsg. I found
the following call-chains with an external msgb parameter.
gprs_ns_sendmsg
<- _bssgp_tx_dl_ud
<- bssgp_fc_in
<- bssgp_tx_dl_ud
Update the test to allocate a real msgb because for the test with
'1000' we will msgb_free it right away.
Sponsored-by: On-Waves ehf
This patch extends test_sgsn_reset_invalid_state by assertions to check
that nscv->state and nsvc->remote_state have been set as expected.
Sponsored-by: On-Waves ehf
The return value check has been removed in the commit 'Use
gprs_nsvc_reset instead of gprs_ns_tx_reset', because gprs_nsvc_reset
had no return value then. Since a compatible return value has been
added by 'Let gprs_nsvc_reset return a value', the former patch is
partly reverted by this commit.
The printf is now an OSMO_ASSERT. The commit message was taken
from Jacob.
Sponsored-by: On-Waves ehf
Currently the NS-VC's state is updated from within gprs_ns_tx_reset,
which can lead to an inconsistent state when the RESET_ACK is lost.
In this state, the NSE_S_RESET bit is set but the Tns-reset timer is
not started.
This patch moves the state update into gprs_nsvc_reset. This way, the
state flags are consistent with the timer.
Addresses:
SGSN -> BSS NS_ALIVE
BSS -> SGSN NS_ALIVE_ACK
BSS -> SGSN BVC_RESET
SGSN -> BSS NS_STATUS, Cause: NS-VC blocked, NS VCI: 0x65
and there is no BSS->SGSN NS_ALIVE
Ticket: OW#1213
Sponsored-by: On-Waves ehf
This tests the behaviour for a certain combination of messages and
packet losses that can put the NS-VC object into an undefined state.
In that state, the peer's ALIVE messages are properly answered, but
the local test procedure has stopped, incoming unitdata PDUs are
answered by STATUS(NS-VC blocked) and the unblocking procedure is not
initiated.
Ticket: OW#1312
Sponsored-by: On-Waves ehf
This function forces the expiration of the timer within struct
gprs_nsvc. It is meant to be used for controlled (and faster) timer
expiration in unit tests. The timer_mode of the expired timer is
returned (or -1 if the timer wasn't active).
Sponsored-by: On-Waves ehf
This records the PDU type of the last message sent to the remote peer
in the global variable sent_pdu_type, which can then be used in
assertions.
Note that sent_pdu_type will remain unchanged if no message has been
sent via sendto.
Sponsored-by: On-Waves ehf
Currently gprs_ns_tx_reset is used to let the NS stack generate
NS_RESET message. This is not adjusting the nsvc state properly.
This patch uses gprs_nsvc_reset instead which starts the full reset
procedure.
Sponsored-by: On-Waves ehf
CC msgfile_test.o
msgfile/msgfile_test.c: In function "main":
msgfile/msgfile_test.c:48:2: warning: implicit declaration of
function "talloc_free" [-Wimplicit-function-declaration]
talloc_free(entries);
^
When the osmocore package is configured with --disable-static,
building of kasumi_test fails. This seems quite legit, given
the function _kasumi_kgcore is not exported.
Don't try to workaround the build system. Include the code.
CCLD kasumi/kasumi_test
kasumi_test.o: In function `test_expansion':
~tests/kasumi/kasumi_test.c:25: undefined reference to `_kasumi_key_expand'
kasumi_test.o: In function `main':
~tests/kasumi/kasumi_test.c:56: undefined reference to `_kasumi'
~tests/kasumi/kasumi_test.c💯 undefined reference to `_kasumi_key_expand'
~tests/kasumi/kasumi_test.c:112: undefined reference to `_kasumi_kgcore'
[...]
If LAPDm receives an I-Frame while there already is an I-Frame in the
tx_queue the code generates an additional RR (to acknowledge the
received I-Frame). Instead, N(R) of the I-Frame in the tx_queue should
be updated to ACK the data.
Currently it takes 3s to establish a SAPI 3 SACCH connection with
osmo-bts. This is due to the fact, that a broken SABME request is
sent first and and is ignored by the MS. Then, after a T200 timeout
(2s) the SABME command is sent again (this time correctly) and
answered by the MS.
The first SABME message is broken (it has a length field of 3 and
ends with 3 bytes from the tail of the original RSL message),
because of it is expected throughout lapdm.c that msg buffers
containing RSL have msg->l2h == msg->data. Some abis input drivers
fulfill this but IPA doesn't, thus the 3 bytes of the IPA header
are still part of the msg and confuse length computation.
Since internal fields of the msg are modified directly, this is
difficult to see.
This patch adds a new function msgb_pull_to_l3() that explicitely
skips over all headers prepending L3 and therefore resets l1h and
l2h. This function is then used instead of msgb_pull_l2h() which
only worked correctly when msg->l2h == msg->data. In addition,
code manipulating msg->tail and msg->len directly has been replaced
by calls to msgb_trim().
Note that this patch does not fix all issues of this case in the LADP
related code.
Ticket: SYS#192
Sponsored-by: On-Waves ehf
Since e.g. the IPA input driver leaves it's specific header in front
of msg->l2h, so that msg->l2h != msg->data. The lapdm code does not expect this at least in
rslms_rx_rll_est_req().
This patch modifies the test program to add a dummy L1 header to
generated messages (unless the test would abort when doing so).
Note that the ok file reflects the current state which is not
correct.
Sponsored-by: On-Waves ehf
This test case processes RSL establish requests for SMS (SAPI 3)
on the SDCCH and the SACCH channels. The TX queues are checked
after processing each message.
Ticket: SYS#192
Sponsored-by: On-Waves ehf
The legacy 7bit conversion functions (those without the '_n_' in the
name) gave wrong return values on 64 bit platforms due to unproper
signed/unsigned conversions and the usage of SIZE_MAX.
This patch fixes this by using a smaller max size (see
GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, currently set to 64k) for the legacy
wrappers and by using unsigned int for max_septets.
In addition, there are tests now that check the return values of
legacy encoding and decoding.
Sponsored-by: On-Waves ehf
In the osmo-bts and libosmo-abis code the hexdump routine is used
for every incoming/outgoing packet (including voice frames) and the
usage of snprintf showed up inside profiles.
There is a semantic change when more than 4096 characters are used.
The code will now truncate at byte boundaries (and not nibbles).
Code:
static const int lengths[] = { 23, 1000, 52 };
char buf[4096];
int i;
for (i = 0; i < 30000; ++i)
char *res = osmo_hexdump(buf, lengths[i & 3]);
Results:
before: after:
real 0m3.233s real 0m0.085s
user 0m3.212s user 0m0.084s
sys 0m0.000s sys 0m0.000s
The filter_fn has not been copied into the new structure breaking
the imsi and other filters in OpenBSC. Looking at the code we should
also introduce a callback for the reset of the context so we could
use subscr_get/subscr_put on the subscriber structure.
Currently those messages are answered by a NS_STATUS message when
received on an uninitialised (no NS_RESET hat been seen yet) NS_VC
which violates GPP TS 08.16 7.3.1 and 7.4.1.
This patch adds checks to gprs_ns_vc_create() and eventually returns
before the error NS_STATUS message is generated.
Sponsored-by: On-Waves ehf
Several messages shall not be answered when a RESET hasn't been
received on a NS-VC:
- NS_RESET_ACK (see 3GPP TS 08.16, 7.3.1)
- NS_ALIVE_ACK (see 3GPP TS 08.16, 7.4.1)
- NS_STATUS (see 3GPP TS 08.16, 7.5.1)
Sponsored-by: On-Waves ehf
I have a crash with an older libosmocore and the sysmobts. I
am not sure how we can have a release for a channel where the
lapdm_channel has not gone through lapdm_channel_init. But to
prevent the crash we can promise lapdm_channel_exit to be idempotent.
It has been idempotent since f5a079f739
When a RESET is received on the same link with a different NSVCI from
a BSS on a dynamically created NS connection do not patch the nsvc
object but create a new one instead. Thus the NSVCI is never modified
at a nsvc object after the NS-VC has been established.
Sponsored-by: On-Waves ehf
This modifies the NS stack's behavior to accept RESET and RESET_ACK
NSEI changes for NS-VC dynamically created by RESET messages from
BSSes. This feature is not used for NS-VC configured via VTY or NS-VC
to a SGSN.
Sponsored-by: On-Waves ehf
This changes the implementations for the reception of RESET and
RESET_ACK to be compatible with 3GPP TS 08.16, 7.3.1:
- Just send a RESET_ACK with correct values back to the SGSN when a
RESET with an invalid NSVCI or NSEI has been received.
- Check RESET_ACK for matching NSEI and NSVCI.
- Ignore unexpected RESET_ACKs.
In addition, use RESET_ACK from a BSS to update the BSS source
address based on the NSVCI to be tolerant with changing UDP source
addresses/ports.
Sponsored-by: On-Waves ehf
Add a test handling proper and mismatching RESETs. The latter may
occur, when ports change within a NS-VC without the SGSN getting
notice.
This tests for the behavior of the NS protocol stack for RESET and
RESET_ACK messages which changing/invalid NSEI and NSVCI like it is
being described in 3GPP TS 08.16, 7.3.1.
Sponsored-by: On-Waves ehf
This fixes a SEGV error that happens the next time the statistics
are updated.
Addresses:
Program terminated with signal 11, Segmentation fault.
#0 0xb7711fa5 in rate_ctr_group_intv (grp=<optimized out>) at
rate_ctr.c:107
107 for (i = 0; i < grp->desc->num_ctr; i++) {
#0 0xb7711fa5 in rate_ctr_group_intv (grp=<optimized out>) at
rate_ctr.c:107
#1 rate_ctr_timer_cb (data=0x0) at rate_ctr.c:129
#2 0xb770ec59 in osmo_timers_update () at timer.c:243
#3 0xb770ef7a in osmo_select_main (polling=0) at select.c:133
#4 0x08049987 in main (argc=3, argv=0xbfba8084) at
gb_proxy_main.c:306
Sponsored-by: On-Waves ehf
Under special circumstances (see below) receiving a NS-RESET leads to
duplicated NS-VC entries.
This happens when the source port of a NS-VC changes to a new one
that has already been used by another NS-VC.
This patch changes gprs_ns_rx_reset() to check for this case and to
use the existing NS-VC object. The NS-VC object that was associated
with the source address before is detached from this source but kept
in the NS-VC list so that it can be reattached when a correspondent
NS-RESET is received later on. Meanwhile it will have a cleared link
layer address which will not match a real link info.
A new counter NS_CTR_REPLACED is incremented each time when the NS-VC
object is replacing another one. A new signal S_NS_REPLACED is added
which gets dispatched in this case, too.
Another new counter NS_CTR_NSEI_CHG is incremented each time when the
NSEI of a NS-VC object (with fixed NSVCI) changes.
Ticket: OW#874
Sponsored-by: On-Waves ehf
Adds the functions gprs_ns_ll_copy() and gprs_ns_ll_clear(). Renames
gprs_ns_format_peer() to gprs_ns_ll_str(). All of these functions
uniformly access the link layer part within the NS-VC objects.
Sponsored-by: On-Waves ehf
Register an osmo signal handler to print a short notice about every
SS_L_NS signal that is generated while processing the tests.
Sponsored-by: On-Waves ehf
The testcase didn't work on Ubuntu 12.04 because vty_create will
directly call vty_event (e.g. not through the plt). This means
that the approach to override vty_event in the testcase failed.
Use the signal interface of libosmocore and make the testcase
use it. The signals can be generally useful as well.
Currently when a NS-RESET is recevied over a link that has not yet
been associated with a NS-VC, the NSEI is used to find an existing
NS-VC. If one is found, the reset procedure is initiated.
This behaviour is not conformant with 3GPP TS 08.16 (see chapter
4.2.3) which allows to use several NS-VC between two endpoints in
parallel.
The patch changes the implementation to use the NSVCI instead
of the NSEI to search for an existing NS-VC object.
Ticket: OW#874
Sponsored-by: On-Waves ehf
According to 3GPP TS 08.16, 7.3 "Reset procedure" the entity
receiving a NS-RESET PDU responds with a NS-RESET-ACK and 'then'
starts the test procedure which essentially means, that a NS-ALIVE
gets sent and a timer is started.
Currently the NS-ALIVE is sent before the NS-RESET-ACK.
This patch fixes the implementation by reversing the order in which
these messages are sent.
Sponsored-by: On-Waves ehf
It started to behave weird on Debian Testing (GCC 4.8), I compiled it
with address sanitizer support and set a breakpoint in
__asan_report_error to get a backtrace.
Holger Hans Peter Freyther
Sylvain Munaut
Daniel Willmann