Change the functionality of skipping unchanged values: instead of
looking up whether new values have been set on a stat item, rather
remember the last reported value and skip reporting identical values.
stats_test.c shows that previously, a stat item reported a value of 10
again, even though the previous report had already sent a value of 10.
That's just because the value 10 was explicitly set again, internally.
From a perspective of preserving all data points, it could make sense to
send consecutive identical values. But since we already collapse all
data points per reporting period into a max, that is pointless.
Related: SYS#5542
Change-Id: I8f4cf34dfed17e0879716fa2cbeee137c158978b
Intead of attempting to store all distinct values of a reporting period,
just store min, max, last as well as a sum and N of each reporting
period.
This gets rid of error messages like
DLSTATS ERROR stat_item.c:285 num_bts:oml_connected: 44 stats values skipped
while at the same time more accurately reporting the max value for each
reporting period. (So far stats_item only reports the max value; keep
that part unchanged, as shown in stats_test.c.)
With the other so far unused values (min, sum), we are ready to also
report the minimum value as well as an average value per reporting
period in the future, if/when our stats reporter allows for it.
Store the complete record of the previous reporting period. So far we
only compare the 'max' value, but like this we are ready to also see
changes in min, last and average value between reporting periods.
This patch breaks API by removing:
- struct members osmo_stats_item.stats_next_id, .last_offs and .values[]
- struct osmo_stats_item_value
- osmo_stat_item_get_next()
- osmo_stat_item_discard()
- osmo_stat_item_discard_all()
and by making struct osmo_stats_item opaque.
In libosmocore, we do have a policy of never breaking API. But since the
above should never be accessed by users of the osmo_stats_item API -- or
if they are, would no longer yield useful results, we decided to make an
exception in this case. The alternative would be to introduce a new
osmo_stats_item2 API and maintaining an unused legacy osmo_stats_item
forever, but we decided that the effort is not worth it. There are no
known users of the removed items.
Related: SYS#5542
Change-Id: I137992a5479fc39bbceb6c6c2af9c227bd33b39b
Background:
* Individual values can be added to osmo_stat_item.values at any time.
* Stats are reported at a fixed interval (see vty 'stats interval'),
e.g. every 10 seconds.
* In order to report a new stat value, we use the maximum of all
osmo_stat_item.values added since the last report.
* By default, we do not send new stat values if they did not change
(see vty 'config-stats' -> 'flush-period' default of 0).
Fix the following bug:
* If 'flush-period' is 0, and no new osmo_stat_item.values are coming
in, the last value that gets reported is not necessarily the last
entry in osmo_stat_item.values.
* For attached reporters (statsd), it could then be that the given stat
stays at the wrong value for a long stretch of time (think of several
hours/days/forever).
Explanation of how the test shows that it is fixed:
* stats get reported (value is irrelevant)
* osmo_stat_item gets a new value: 20
* osmo_stat_item gets a new value: 10
* stats get reported (value: 20, the maximum of both new values)
* osmo_stat_item gets no new values
* stats get reported (value: 10, this is new because of the bug fix,
the real last value in osmo_stat_item, different from the 20 sent
earlier, without the fix it would not send anything here and the last
sent value would be 20)
* osmo_stat_item gets no new values
* stats get reported (nothing gets sent, since the real last value was
already sent and 'flush-period' is 0)
Fixes: OS#5215
Change-Id: Ibeefd0e3d1dbe4be454ff05a21df4848b2abfabe
generic sha code from git://w1.fi/hostap.git commit
5ea93947ca67ba83529798b806a15b247cdb2e93 which also happens
to be the source of our milenage code.
Related: SYS#5324
Change-Id: Ibf2e49edada944d91ceba62bd0d6b6ce69261fcd
This patch adds a new field "name" to the rate_ctr and osmo_stat_item_group
structs, together with an API to set it. This new field allows for easy
identification of specific group instances when several of them exists,
rather than using a sometimes random/increasing index value.
If set, this name (string) is used instead of the index by the stats
reporter.
The name, if set, is also printed during "show stats" VTY commands.
It's up to the user or application to set up unique or meaningful names
to fullfill one's needs.
WARNING: this commit breaks ABI and possibly creates unexpected behavior
when run with non-rebuilt apps which use the modified structs directly
to get the coutners, or if use the static inline API rate_ctr_inc2().
Existing users of these structs should migrate to use new APIs
introduced in follow-up commits instead of accessing the field directly.
Related: SYS#5456
Change-Id: I0dc510783dd9ae8436dae8005a7b3330e80d36f3
This is required to reset and close a card under software control
after opening it with osim_card_open()
Change-Id: Ie9ec66db4d54fdb1331f4ae05ca3ca4274912e9d
This new API doesn't use host_config_set(), and allows passing a FILE*
from any source, not only a filesystem path.
Related: SYS#5369
Change-Id: I720ac04386261628c0798a1bfcaa91e2490a86c3
The api doc indicates the possibility to pass -1, and calling
osmo_tdef_get() actually casts the arg to a signed long. To end the
confusion, change default_timeout from unsigned long to long.
Change-Id: I51b9172603984839448346c9836e43c8c802fcf8
We've used up all but one "library reserved" VTY nodes at this point,
and we should definitely add some more reserved nodes in the next
libosmovty ABI version / release.
Change-Id: Idfe1e7d97f3f29fc219e80dcb6ce6bb768733adf
Prior to this patch, it was not possible to gather SET/GET reply
information when implementing a CTRL client using libosmocontrol. This
is specially important when using the GET command, since one wants to
receive the queried value.
CTRL traps can also be handled this way by extending this patch in the
future if needed.
Change-Id: Id3c4631cd32c13e78e11b6e8194b8c16307ec4f1
Some averaging methods may have additional parameters, so let's
make it easier to access them for the API user.
Change-Id: I2f4ed56837dd479dbbd10c0a7df0ed7565d3946a
Related: SYS#4918
This is required in order to tell MS that osmo-pcu now supports
Network Assisted Cell Change (NACC).
Related: SYS#4909
Change-Id: I2aaa8c1107c977f711c2d7530034f57e36e3a237
This is basically a successor of gsm0808_create_sapi_reject(), but
instead of hard-coding GSM0808_CAUSE_BSS_NOT_EQUIPPED, it allows
the caller to specify a cause value to be used. The old function
is now deprecated and should not be used.
Change-Id: Iefe5484d0fa02d5722b628b1dc237d51d3fb1a9b
Related: OS#4728
If a BVC-RESET is sent from SGSN, there must not be a cell ID IE
included. See "Note 1" of TS 48.018 Section 10.4.12.
Change-Id: I11d4e70d510265b9c09dffccdab10b3f0816715a
At the moment we print the pointer address to identify the log lines
belonging to a specific connection. Since pointer addresses are
difficult to work with, a human readable ID should be printed instead.
e.g. "This is LAPD instance for SAPI3 on bts0/trx1/ts5/lchan3"
Change-Id: Ie6742843fff809edffcac24c4dce4edf66bc71be
Closes: OS#1938
This function may be useful in a case when most of the BTS models
do support some feature, but just a couple models do not. It's
much easier to unset that feature 2/10 times than set it 8/10
times individually for each BTS model.
Change-Id: Ib5fa27287be7f1ecf2f82249b1e8c848465cbac0
Related: I431c8ab9478cbc40179903edc21043623d805da1
So far we only looked at SW definitions of the card profile. However,
if we have a currently selected application, we also must check
that application for SW definitions.
This breaks ABI and API all over the place, but as there are no
known users beyond osmo-sim-test, this is acceptable.
Change-Id: I3a1d60898529c173f73587e34c155660ba5f5fb1
In order to dissolve info_meas_ind_param in ph_data_param and
ph_tch_param we need to add the measurement related struct members to
ph_data_param and ph_tch_param as well so that those indications can
also carry measurement data.
Change-Id: I2c34b02d329f9df190c5035c396403ca0a4f9c42
Related: OS#2977
Follow up for patch I3cf150cc0cc06dd36039fbde091bc71b01697322
osmo_sockaddr_str_{from,to}_32n actually use host byte order. Deprecate these
and introduce a more accurately named version ending in h.
Change-Id: Ic7fc279bf3c741811cfc002538e28e8f8560e338
So far we had a function to allocate a new bssgp_bvc_ctx, but not
the opposite one. Let's finally introduce it, so it will be used
at least in OsmoPCU.
Please note that the new symbol has 'bssgp_' prefix, not 'btsctx_'.
Change-Id: Ia78979379dbdccd6e4628c16f00d0c06d9212172
This is useful for timers expected to have a range of valid or expected
values.
Validation is done at runtime when timer values are set by the app or by
the user through the VTY.
Related: OS#4190
Change-Id: I4661ac41c29a009a1d5fc57d87aaee6041c7d1b2
The intention of osmo_tdef_get()'s val_if_not_present argument was to return a
default timeout, or to optionally abort the program for missing timer
definitions if the default timeout is < 0. This was the case in the original
implementation of this API in osmo-bsc, but in the migration to libosmocore,
the argument was by accident changed to an unsigned type. In consequence, the
assertion in the implementation that was intended to abort the program seemed
bogus to coverity, and was fixed by removal in
I7a544d2d43b83135def296674f777e48fe5fd80a -- the wrong direction, as is obvious
from the API doc for osmo_tdef_get().
Note that osmo-bsc master passes -1 in various places and expects the
program-abort behavior that was missing from the libosmocore implementation.
Change the val_if_not_present argument to a signed type, and revert removal of
the assertion, so that passing -1 has the effect described in the API doc:
program abort on missing timer definition.
This bug was not detected because it is hard to write tests that expect a
program abort to happen, hence no tests for this API feature exist.
Related: OS#4152
Change-Id: Ie61c3c85069916336e6dbd91a2c16f7634816417
Change two instances of Speech Version values to enum gsm0808_permitted_speech.
It is often not trivial to find the right values for a uint8_t member, giving
the enum name makes it a lot easier/safer to use.
In gsm0808_create_handover_required(), use msgb_tv_put() so that the enum's
storage size doesn't matter. (Already used for handover_performed)
Fix typo in doc of gsm0808_create_handover_required().
Change-Id: I6387836bab76e1fa42daa0f42ab94fc14b70b112
To be able to append an escaped or quoted string using
OSMO_STRBUF_APPEND_NOLEN(), the function signature must have the buf and len as
first args, like most other *_buf() functions.
Add osmo_escape_str_buf2() and osmo_quote_str_buf2() to match this signature.
A recent patch [1] has changed the return value of osmo_escape_str_buf() to
char*, removing the const. However, the functions may return const strings,
hence re-add the const. The new signatures always return the non-const buffer.
To avoid code duplication, implement osmo_quote_str_buf() and
osmo_escape_str_buf() by calling the new functions.
I decided to allow slight changes to the behavior for current osmo_escape_str()
and osmo_escape_str_buf(), because impact on callers is minimal:
(1) The new implementation uses OSMO_STRBUF_*, and in consequence
osmo_quote_str() no longer prints an ending double quote after truncated
strings; Before, a truncated output was, sic:
"this string is trunca"
and now this becomes, sic:
"this string is truncat
I decided to not keep the old behavior because it is questionable to begin
with. It looks like the string actually ended at the truncation boundary
instead of the reason being not enough space in the output buffer.
(2) The new osmo_escape_str_buf2() function obviously cannot pass-thru an
unchanged char* if no escaping was needed. Sacrifice this tiny optimization
feature to avoid code duplication:
- it is an unnoticeable optimization,
- the caller anyway always passes a string buffer,
- the feature caused handling strings and buffers differently depending on
their content (i.e. code that usually writes out strings in full length
"suddenly" truncates because a non-printable character is contained, etc.)
I considered adding a skip_if_unescaped flag to the osmo_quote_str_buf2()
function signature, but in the end decided that the API clutter is not worth
having for all the above reasons.
Adjust tests to accomodate above changes.
[1] 4a62eda225
Ibf85f79e93244f53b2684ff6f1095c5b41203e05
Change-Id: Id748b906b0083b1f1887f2be7a53cae705a8a9ae
To prevent re-entering osmo_fsm_inst_term() twice for the same osmo_fsm_inst,
add flag osmo_fsm_inst.proc.terminating. osmo_fsm_inst_term() sets this to
true, or exits if it already is true.
Update fsm_dealloc_test.err for illustration. It is not relevant for unit
testing yet, just showing the difference.
Change-Id: I0c02d76a86f90c49e0eae2f85db64704c96a7674
The NS implementation part of the Gb implementation libosmogb
so far implemented a rather classic dialect of Gb, with lots of
heritage to FR (Frame Relay) transports. At least since Release 6
of the NS specification, there's an IP Sub-Network Service (SNS),
which
* permits for dynamic configuration of IP endpoints and their NS-VCs
* abandons the concept of a NSVCI on IP transport
* forbids the use of RESET/BLOCK/UNBLOCK procedures on IP transport
This commit introduces BSS-side IP-SNS support to libosmogb in a
minimally invasive way. It adds a corresponding SNS FSM to each NS
instance, and implements the new SIZE/CONFIG/ADD/DELETE/CHANGE_WEIGHT
procedures very closely aligned with the spec.
In order to use the SNS flavor (rather than the classic one),
a BSS implementation should use gprs_ns_nsip_connect_sns() instead
of the existing gprs_ns_nsip_connect().
This implementation comes with a set of TTCN-3 tests in
PCU_Tests_RAW_SNS.ttcn, see Change-ID
I0fe3d4579960bab0494c294ec7ab8032feed4fb2 of osmo-ttcn3-hacks.git
Closes: OS#3372
Closes: OS#3617
Change-Id: I84786c3b43a8ae34ef3b3ba84b33c90042d234ea
Previously it could encode both incorrect values as well as incorrect
message. Let's fix this by explicitly checking for invalid values and
ensuring that at least one of the parameters is valid.
This function have no external or internal users so it's better to fix
type signature as well to match the rest of gsm0808_create_lcls_*().
Change-Id: I7b33a771acbd391c5f9a494d6450edb18511433f
According to 3GPP TS 29.002, there are two services:
- MAP-MO-FORWARD-SHORT-MESSAGE (see 12.2),
- MAP-MT-FORWARD-SHORT-MESSAGE (see 12.9),
which are used to forward MO/MT short messages.
This change replicates both services as GSUP messages:
- OSMO_GSUP_MSGT_MO_FORWARD_SM_*,
- OSMO_GSUP_MSGT_MT_FORWARD_SM_*.
Please note, that only the 'must-have' IEs are introduced
by this change, in particular the following:
- OSMO_GSUP_SM_RP_MR_IE (see note below),
- OSMO_GSUP_SM_RP_DA_IE (see 7.6.8.1),
- OSMO_GSUP_SM_RP_OA_IE (see 7.6.8.2),
- OSMO_GSUP_SM_RP_UI_IE (see 7.6.8.4),
- OSMO_GSUP_SM_RP_MMS_IE (see 7.6.8.7),
- OSMO_GSUP_SM_RP_CAUSE_IE (see GSM TS 04.11, 8.2.5.4),
where both SM_RP_DA and SM_RP_OA IEs basically contain
a single nested TV of the following format:
- T: identity type (see 'osmo_gsup_sms_sm_rp_oda_t'),
- V: encoded identity itself (optional).
According to GSM TS 04.11, every single message on the SM-RL has
an unique message reference (see 8.2.3), that is used to link
an RP-ACK or RP-ERROR message to the associated (preceding)
RP-DATA or RP-SMMA message transfer attempt.
In case of TCAP/MAP, this message reference is being mapped to the
Invoke ID. But since GSUP has no 'Invoke ID' IE, and it is not
required for other applications (other than SMS), this change
introduces a special 'SM_RP_MR' IE that doesn't exist in MAP.
Change-Id: Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71
Related Change-Id: (docs) Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: (TTCN) Ibf49474a81235096c032ea21f217170f523bd94e
Related: OS#3587
* add Class definitions
* add helper to check for extended bit
* add helper to get Cause's Class
* use enum in gsm0808_cause_name() and gsm0808_create_cipher_reject() to
avoid confusion between class and cause
* update gsm0808_create_cipher_reject() comments
Change-Id: I31b31dfc22eb4b6b07089e1255246ac458125340
Related: OS#3187
There is already a group of similar functions for L1, L2 and L3,
but L4 was missing. The L4 is usually used for parsing of complex
L3 messages, such as SS/USSD and SMS.
This change introduces a similar halper for L4.
Change-Id: I755f2d654bbdad2a8b4f94df9023bdd370b07ae6
There was gsm0480_l3hdr_push() declared in a header file, but
not exposed in 'libosmogsm.map'. Furthermore, for some reason
it was a part of GSM 04.80 API, what is not actually correct.
Let's rename this symbol, and properly expose it as a part of
the GSM 04.08 API. Also, let's introduce an auxiliary wrapper
for messages, where the transaction identifier is required
(see GSM 04.07, section 11.2.3.1.2).
Change-Id: I8a045efe8335d83fcbe8d43eb180972e3b1d9dda
In order to be able to transfer SS/USSD messages via GSUP,
this change introduces the following new message types:
- OSMO_GSUP_MSGT_PROC_SS_*,
and the following new IE:
- OSMO_GSUP_SS_INFO_IE
which represents an ASN.1 encoded MAP payload coming to/from
the mobile station 'as is', without any transcoding.
Change-Id: Ie17a78043a35fffbdd59e80fd2b2da39cce5e532
Related: OS#1597