When a bad GSM voice frame is received, it's being replaced
by a silence frame. This may cause unpleasant audio effects.
This change implements a functionality to craft a replacement
frame from the last known good frame. Currently, only FR is
supported, support for other codecs may be added latter.
Change-Id: I06a21f60db01bfe1c2b838f93866fad1d53fdcd1
This change defines the GSM FR bit positions as described
in RFC 3551, which will be used by further ECU
(Error Correction Unit) implementation.
Change-Id: I1d0a198af0f8dd1f690b5a81f5c9eb92c43aefed
With stat_item, stats.c and stats_statsd.c, it is becoming a bit
difficult to understand file naming. Also, the 'statistics.c' file
actually only contained osmo_counter handling, so let's rename it to
counter.c altogether.
Change-Id: I2cfb2310543902b7da46cb15a76e2da317eaed7d
These PRBS sequences are specified in ITU-T O.150. They are typically
used as test data to be transmitted for BER (bit error rate) testing.
Change-Id: I227b6a6e86a251460ecb816afa9a7439d5fb94d1
We need to have an architecture-independend way of endian conversion /
byte swapping functions which will also work on embedded (bare iron)
builds. Let's introduce osmocom/core/bytesawp.h for this purpose.
Change-Id: Ibc0cc1e36d4ed63a35cf8ceff3af0f26e5ac7a3d
The planned support for true A over IP requires the encoding and
decoding of a so called "AoIP Transport Layer Address" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I57933b0a06a3f54ec2a41e6ecb6ced9fbbc89332
Ensure that a changed conv_gen.py and/or conv_codes_gsm.py result in
regeneration of the gsm0503* generated sources. Before this patch, manual
cleaning of the generated files was necessary to benefit from a code update.
Change-Id: Ib4328662c21280c0ea6aa9391a64ada2c6598704
To ensure that a separate build dir keeps the source dir clean of state,
generate the gsm0503.h to the builddir instead of the srcdir. Adjustments for
everyone to access the right paths were added in previous patches.
Change-Id: Ia773ef5893a2018feb416061aefcf51835df18d2
There are some projects, such as GR-GSM and OsmocomBB, which would
benefit from using one shared implementation of GSM 05.03 code. So,
this commit introduces a new sub-library called libosmocoding, which
(for now) provides GSM, GPRS and EDGE transcoding routines, migrated
from OsmoBTS.
The original GSM 05.03 code from OsmoBTS was relicensed under
GPLv2-or-later with permission of copyright holders (Andreas Eversberg,
Alexander Chemeris and Tom Tsou).
The following data types are currently supported:
- xCCH
- PDTCH (CS 1-4 and MCS 1-9)
- TCH/FR
- TCH/HR
- TCH/AFS
- RCH/AHS
- RACH
- SCH
Change-Id: I0c3256b87686d878e4e716d12393cad5924fdfa1
Since we have automatic header generation, implemented in the
utils/conv_gen.py, it's time to use this feature!
Change-Id: I21caa4e433b2cc1861611e35350a9671da444c2a
In the process, also:
* Change the license from AGPLv3 to GPLv2-or-later;
* correct spelling of 'sysmocom' to lowercase;
* add '2016' to the copyright;
* rename to osmo_*;
* add API docs;
* add logging category DLOAP: define id and add to internal_cat;
* redirect all oap.c logging to DLOAP.
A unit test will follow in a subsequent patch, since it needs a minor tweak for
decoding of boolean values.
The related openbsc change-id is I2f06aaa6eb54eafa860cfed8e72e41d82ff1c4cf.
Tweaked-by: Neels Hofmeyr
Change-Id: If5099e60681a215e798b6675f21813f26769c253
Includes EGPRS coding and puncturing scheme (CPS) tables from 3GPP
TS 04.60. Currently osmo-bts-trx is the only user of CPS table
values, but this may change with gprsdecode and other utilities.
Change-Id: I09fe6514a0e2e51bb3206f8387633f7e0255345f
Corresponding test code include both official test vectors from the
specs and data from over-the-air tests.
This obsoletes libosmo-crypt-a53 as it was last missing piece
unimplemented in libosmogsm.
Change-Id: I939e4f6b91b4a7c591ef3761fe2d46ed1c2fb2d3
Related: OS#1582
This code is supposed to formalize some of the state machine handling in
Osmocom code.
Change-Id: I0b0965a912598c1f6b84042a99fea9d522642466
Reviewed-on: https://gerrit.osmocom.org/163
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Move those routines from OpenBSC to libosmogsm, so they can be
re-used from other programs. I think it was a mistake to add them only
inside the openbsc repository in the first place. We need to pay more
attention to this in the future.
The definitions in this header file (and associated strings in the
c file) are generic about the GPRS Layer3 signalling protocols, and
thus should be part of the library.
Add python utility to generate .c code with convolutional
encoder/decoder based on polynomial description of the code. If argument
given it'll be interpreted as intended output directory, otherwise
current working directory is used.
Codes for *CCH, CS2/3 and TCH/AFS are generated. Corresponding manual
implementations are removed from tests. This introduce build-time
dependency on python.
The main work for this patch was generously contributed by Sylvain
Munaut.
Fixes: OS#1629
This may seem like overkill for a mere const char * config item, but it makes
the Control interface VTY commands reusable in any main() scope (inspired by
libosmo-abis' VTY config).
Add API functions ctrl_vty_init() and ctrl_vty_get_bind_addr(), in new files
src/ctrl/control_vty.c and include/osmocom/ctrl/control_vty.h, compiled and/or
installed dependent on ENABLE_VTY.
Using these functions allows configuring a static const char* with the VTY
commands
ctrl
bind A.B.C.D
which callers shall subsequently use to bind the Control interface to a
specific local interface address, by passing the return value of
ctrl_vty_get_bind_addr() to control_interface_setup().
Add CTRL_NODE to enum node_type, "eating" RESERVED4_NODE to heed that comment
on avoiding ABI changes.
Add bit map encoder and decoder functions: decoder is fully functional
while encoder is good enough for testing - no backtracking to find
the best possible compression is implemented. If somebody is willing to
implement MS side of EDGE than this has to be expanded.
Add corresponding tests.
N. B: the encoding is implemented according to ETSI TS 44.060 which is
slightly different from T4 used for fax according to CCITT G31D (RFC 804).
Ticket: OW#2407
Sponsored-by: On-Waves ehf
Signed-off-by: Max <msuraev@sysmocom.de>
Shipping our own private copy of talloc was a good idea in 2008,
when it was not readily available on most target platforms. Today,
the situation is quite different, as it is a standard library on
major Linux distributions.
This introduces a new configure flag by which the libosmocore-internal
talloc code is not compiled, but rather a system-wide libtalloc is used.
When we started openbsc/libosmocore in 2008, libtalloc was not widely
present on systems yet. This has changed meanwhile, and we should
simply use the system-wide library
This commit provides the stats reporting framework that can manage
several types of measurement reporters. Initially support for
rate_ctr and the statsd protocol is included.
Sponsored-by: On-Waves ehf
This file will contain the VTY code related to statistics.
This commit adds a minimal file with just as single VTY command:
- show stats This command shows all statistical values
To enable this and future commands, the main program needs to call
stats_vty_add_cmds().
Sponsored-by: On-Waves ehf
This commit adds instrumentation function to gather measurement
and statistical values similar to counter groups.
Multiple values can be stored per item, which can be retrieved in
FIFO order. Getting values from the item does not modify its state to
allow for multiple independant backends (e.g. VTY and statd).
When a new value is set, the oldest value gets silently overwritten.
Lost values are skipped when getting values from the item.
Sponsored-by: On-Waves ehf
The current functions are used to 'qualify' an APN from the
user-supplied APN name (name identifier) towards the fully-qualified
APN name which is used in the .grps DNS zone.
On GNU __BYTE_ORDER and __LITTLE_ENDIAN is defined and
the include is "endian.h" on FreeBSD it is "sys/endian.h"
and LITTLE_ENDIAN/_LITTLE_ENDIAN and BYTE_ORDER/_BYTE_ORDER
is defined.
Create a header file that defines OSMO_IS_LITTLE_ENDIAN
and OSMO_IS_BIG_ENDIAN and can be used as
#if OSMO_IS_LITTLE_ENDIAN
do_little_endian
#elif OSMO_IS_BIG_ENDIAN
do_big_endian
#else
#error "Unknown endian"
#endif
These patches enhance the Supplementary Service (SS) processing from
only being able to handle USSD to other SS, specifically activation,
deactivation and interrogation of those SS. Registration is not yet
implemented.
include/osmocom/gsm/protocol/gsm_09_02.h has been added with needed
values for SS.
Modified by Harald Welte to keep the old ussd-only functiosn for API/ABI
stability.
As we are breaking builds by moving functions from libosmo-abis to
libosmocore anyway, we might as well give functions more appropriate
names. ipaccess is a company, while IPA is the multiplex protocol, and
CCM is the protocol used for establishing identities on the IPA
multiplex.
libosmo-abis is about forming A-bis interfaces/lines by means
of E1 or the IPA multiplex (or possibly other link layers).
The IPA multiplex is used in other contexts, such as the Control
interface, or the A interface. In that context, it makes sense to
have generic IPA related functions in libosmocore.
The number of digits is the number of used octets times two (two
digits per octet). The result has been successfully dissected by
wireshark. It has not been tested with real phones.
Add a new core/defs.h file for definitions that can be used from
within header files without including prototypes and extern
declarations. It's primarily meant for macro definitions and basic
typedefs.
Move the definition of OSMO_DEPRECATED there and use compiler version
info to avoid compiler errors.