This patch adds the convolutional code definitions for CSD (circuit
switched data) on TCH/F channels with user bit rates of 2400, 4800, 9600
and 14400 bps.
Related: OS#4396, OS#1572
Change-Id: I412131d7ee2e676402bf8d88394af17c4447b664
config.h is created in $(top_buildir)/config.h.
Let's make sure all CPPFLAGS add correct -Ipath includes,
and that all code includes the correct file.
Change-Id: Ie9ea38bb009bc715b01cde4d66d181f7bec2e7bd
This way we have all libosmocore.so in an own subdir instead of having
lots of files in the parent dir, which also contains subdirs to other
libraries.
This also matches the schema under include/osmocom/.
Change-Id: I6c76fafebdd5e961aed88bbecd2c16bc69d580e2
Don't attempt to build osmo-stat-dummy, unless ENABLE_UTILITIES is set.
We check for this in utils/Makefile.am too.
Fix for currently failing master-osmo-ccid-firmware job, at
cross-compiling libosmocore:
make[3]: *** No rule to make target '../../src/vty/libosmovty.la', needed by 'osmo-stat-dummy'. Stop.
Fixes: 7a79dd3d ("osmo-stat-dummy: add rate counters and statsd tester")
Change-Id: I44e49b5646518bd07b2628ca488e4bf74586852c
So far ctrl interface did not allow to specify port to bind to.
Let's fix this and make it consistent with the way vty bind works.
N. B: the functions which ignore port configured via vty are marked as deprecated,
the sw which uses them should be ported to either newly added ctrl_init_default()
or simplified ctrl_interface_setup()
The similar change for vty interface will be addressed via separate patch series.
Related: OS#5809
Change-Id: I0fd87fd41fd3ac975273968d24f477daa3cd3aa9
Unfortunately "-std=c99" is not sufficient to make gcc ignore code that
uses constructs of earlier C standards, which were abandoned in C99.
See https://lwn.net/ml/fedora-devel/Y1kvF35WozzGBpc8@redhat.com/ for
some related discussion.
Change-Id: I84fd99442d0cc400fa562fa33623c142649230e2
The pointer is initialized in all its uses, however newer gcc warns
about it:
"""
inlined from ‘main’ at /libosmocore/utils/osmo-arfcn.c:144:16:
/usr/include/bits/stdlib-float.h:27:10: error: ‘param’ may be used uninitialized [-Werror=maybe-uninitialized]
"""
Change-Id: If3eff4ab14a7b2a950386244c9b5f2b9adb32f99
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: I5050285e75cf120407a1d883e99b3c4bcae8ffd7
Replace some with atoi(), where the VTY has already validated correct
range of the argument.
Replace others with the new osmo_str_to_int() or osmo_str_to_int64()
functions, possibly covering more detection of invalid number strings.
Leave those strtol() callers that depend on endptr to provide the next
string token.
Related: SYS#5542
Change-Id: I0ebb06e751c28f7d1cdf328de29cd227a2449391
This is useful when debugging IMS Authentication which uses
RFC3310 representation of the nonce and expected result.
Change-Id: Ibfa72410d8ff8e5b42063f1a12bff69ad2bebbb8
Use base '0' of strtoul to permit both decimal and hexadecimal input
to the SQN parameter. Some other tools represent the SQN as hex,
so this avoids having to use some external tool to convert and allows
you to copy+paste it to the osmo-auc-gen command line.
Change-Id: I67c6341a989de433451994b824e12afd0c26cb8a
The positions of arguments in the call to "milenage_check" do not
match the ordering of the parameters:
* "ck" is passed to "ik"
* "ik" is passed to "ck"
Let's simply reorder the arguments of milenage_check()
to match the ordering in milenage_f2345().
Change-Id: Ia003d3c9d88fb8f6740791583855a709b8639160
Fixes: CID#220324
This new utility implements the UMTS AKA procedures of the SIM
side. It can be used to manually verify the correctness of
authentication tuples received from the network.
Change-Id: I497747fbf09f633dcd7c592bd9af7fca9a820645
Let's use log_set_print_filename2() API instead, which has less ackward
behavior implications like changing the print status of category-hex.
Related: OS#5034
Change-Id: Ifc78e1dcba5baf0b41f6ccbbbd1e3f06552d73da
This adds a simple NS traffic generator that can be used to perform
load testing on NS links, particularly those with limited bandwidth
such as frame-relay E1 lines.
Related: OS#4995
Change-Id: Iad3b694c85962dbbc6b4a27a0ed5bc841add464f
The call was only introduced as workaround for the first implementation
of vty. There is no need for this anymore. The configuration can
just add "accept-ipaccess" to the bind to allow creation of dynamic
ipaccess NSE.
Change-Id: Ie924ead6da17657f3da334068c8ada82c8845495
Drop the vty(1) code and replace it with vty2. The vty(1) was only
used as intermediate to not develop a vty while developing a new
code base behind. Users of gprs_ns2_ has to use the new vty code.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: Ic2059e75d8ede8e5c29c4fef6be608ed79c8a97c
This reverts commit b306094448.
It was merged too quickly and patches for projects using related
features are not yet prepared.
Change-Id: I8a2aaf74a47de8f4f0adb37d16426d199788e3fe
Drop the vty(1) code and replace it with vty2. The vty(1) was only
used as intermediate to not develop a vty while developing a new
code base behind. Users of gprs_ns2_ has to use the new vty code.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: I8c3f2afecc74b78f7f914f7dce166cbcb63444eb
Without setting the flag the osmo-ns-dummy won't create
any dynamic NSEs.
This flag will be removed in a future release but for now
it will be included.
Related: SYS#5208
Change-Id: I196cc454b5d7bc53848f73596a2f92730b78922b
A dummy client to do integration tests of the ns2 layer.
It drop all unit data. But allows vty tests.
Change-Id: I127c178426bc1a3da8de251740eda93853030d6d
So far we only looked at SW definitions of the card profile. However,
if we have a currently selected application, we also must check
that application for SW definitions.
This breaks ABI and API all over the place, but as there are no
known users beyond osmo-sim-test, this is acceptable.
Change-Id: I3a1d60898529c173f73587e34c155660ba5f5fb1
an USIM application can very well exist on a UICC without supporting
classic DF.GSM access. However, most commonly, both are found on
cards.
Change-Id: I6180a3f81a7d3006e8ece4302c2433db2588bfaa
Before this change, a card application (USIM, ISIM, ...) didn't
exist as a separate concept from a card profile. This meant,
we had a manual combination of UICC card profile with USIM application,
and another one of UICC card profile and ISIM application. But what
if there's a combined USIM+ISIM?
In reality, applications exist as separate objects, on top of an
ETSI UICC. Lets therefore register all known applications to the
osim library core, and add code to osmo-sim-test which dynamically
detects all applications present on a given card (by reading EF.DIR).
Change-Id: Ic4b4ac433a9976842b30a017fb0fc347d87201cd
Using the new '--output-dir' command line argument, the user can
instruct osmo-sim-test to dump the file content to a local directory.
osmo-sim-test will create one sub-directory per DF, and create a
text file for each EF. The contents of the text files are a hexdump
of the contents. Transparent EF are dumped as one line of hex,
while linear fixed EF are dumped as one record per line, i.e. the
number of lines corresponds to the number of records.
Change-Id: I35176f4a13c3537eaa8de550e231818a22b4c07c
AMR SID update frames are protected using an 1/4 convolutional coder,
wich is similar to the one used with 6,7 kbit voice frames. Except that
there is no puncturing and the length is different.
Change-Id: Ia35ed4178a7f0d816052b7e5d6478b93a1d9744f
Related: OS#2978
The variable struct tlv_parsed tp in dump_file() conditionally
initalized by tlv_parse() but later it is accessed under a different
condition without a check that makes sure that tp is only accessed when
tlv_parse() was called beforehand. Lets introduce a check that makes
sure tp can not be accessed when it is uninitalized.
Change-Id: I6b0209b966127a4195e6f4bcb43d49387c7646ce
Fixes: CID#208435
If selection of ADF_USIM fails, let's fall-back to reading/dumping
a classic TS 11.11 (51.011) SIM card.
Change-Id: I5a986fc65de76c24c5af52ce7e8c699cf302fda9
Don't just iterate over all files in the current working
directory (cwd), but also recurse through all sub-directories.
Change-Id: I737b01d9a845e37d8be9d4709ef0de04e749daec
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I84ef43f700e125c7a65f92347f12844e07e65655
log_enable_multithread() enables use of locks inside the
implementation. Lock use is disabled by default, this way only
multi-thread processes need to enable it and suffer related
complexity/performance penalties.
Locks are required around osmo_log_target_list and items inside it,
since targets can be used, modified and deleted by different threads
concurrently (for instance, user writing "logging disable" in VTY while
another thread is willing to write into that target).
Multithread apps and libraries aiming at being used in multithread apps
should update their code to use the locks introduced here when
containing code iterating over osmo_log_target_list explictly or
implicitly by obtaining a log_target (eg. osmo_log_vty2tgt()).
Related: OS#4088
Change-Id: Id7711893b34263baacac6caf4d489467053131bb
Receive gsmtap logs and feeds it into the python logging
framework. Allows to use generic logging features and
further utilities.
Change-Id: I24478d8e16066c6118e867bdba54c6418c15e170
That's pretty straightforward and convenient extention: handle all
extra positional arguments as patch file names. This makes it similar to
'cp' and other coreutils basic tools. For example:
osmo-config-merge base.cfg patch1.cfg patch2.cfg patch3.cfg
will apply 3 patches to the base config file.
Change-Id: I212cbdc3bf6f251c1a3175737ac74242fb004c6d
ARFCNs are values in well defined ranges. Until this patch, ARFCNs not
belonging to any band were blindly assigned to DCS1800 by
gsm_arfcn2band, causing unnoticed bugs and misconfigurations in
osmo-bsc.
Previous API gsm_arfcn2band cannot accomodate this kind of check easily,
so let's deprecate it to tell people to use a new API gsm_arfcn2band_rc
which performs this kind of checks and allows callers to log failures,
misconfigurations, etc.
At the same time, modify implementation of gsm_arfcn2band to abort if an
invalid ARFCN is passed, this way users of this API can notice they are
passing wrong data to it that most probably will produce unexpected
results.
Related: OS#3063
Change-Id: I780d452dcebce385469e32ef2fd844df6033393a
Harald Welte
arehbein
Pau Espin
Oliver Smith
Vadim Yanitskiy
Neels Hofmeyr
Philipp Maier
Eric Wild