In an AoIP scenario, the speech codec list field specifies the
codecs used in the RTP interface. This patch adds a table
with default codec configurations that match the codec
configurations that are also used on the air interface.
Change-Id: I9dc0165d76a022b2c1b7418bc3133407e61b7261
The implementation of the parser/generator for the speech codec
information element slightly wrong, making it impossible to use
it properly.
(See also: 3GPP TS 48.008, 3.2.2.103)
Change-Id: Idabb0f9620659557672e1c6b90c75481192e5c89
The codec type to be set in member type in struct gsm0808_speech_codec
has its own coding scheme to reference the used codec types. This patch
declares an enum with valid speech codec types.
Change-Id: Icaa768071d4364e671bc7e6d48b82d1f07f93f93
The constants in enum gsm0808_permitted_speech are not very expressive.
Add comments indicating each constant's corresponding codec.
Change-Id: I9734f7c261becffe38ffd41c304d006d08530c1a
3GPP TS 24.008 specifies two new speech versions for half rate and
two new speech modes for full rate. This patch adds the relevant
constants to enum gsm48_bcap_speech_ver in gsm_04_08.h
Change-Id: Id2835384c855f924332d38f01c73bd1cfdb62549
Add the information which GSM Speech codec version coresponds to
which bearer capability speech version.
Change-Id: Ic9493fea139420a52c32b17d00ac7d0b2bf86967
Table 10.5.157 in 10.5.6.6 of 3GPP TS 04.08 is badly formatted. The first
value 0x19 "LLC or SNDCP failure" is in the same line as the heading and has
not been included in the struct_value so far.
Table 10.5.157 in 10.5.6.6 of 3GPP TS 24.008 fixes this formatting issue and
also defines two more values 0x08 and 0x18 which are now added to the struct
value_string.
Change-Id: I5bcc52f739ff0677011d024448afcc2a54869638
* data structure representing 3GPP TS 52.021 §9.4.62 SW Description
* function to serialize it into msgb
* function to deserialize it from buffer
* functions to extract/estimate buffer size for SW Description
* test harness (partially taken from OpenBSC)
There are several similar functions to deal with SW Description in
OpenBSC, there's also need to use similar functionality in
OsmoBTS. Hence it's better to put the code into common library with
proper tests and documentation.
Change-Id: Ib63b6b5e83b8914864fc7edd789f8958cdc993cd
Related: OS#1614
The planned support for true A over IP requires the encoding of
the a Cell Identifier List element (see also BSS_MAP_MSG_PAGING).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I625245dd1dd396fc2bc189e8cd2c444a33042528
The planned support for true A over IP requires the encoding of
the an Encryption Information element (see also BSS_MAP_MSG_CIPHER_MODE_CMD).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I8262050a9d9fd3f17462cfbb046c6e034dccc6fb
The planned support for true A over IP requires the encoding of
the a Channel Type element (see also ASSIGNMENT REQUEST).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: Id0e2164d84b8cbcc6fe6a090fc7f40a1251421d7
The planned support for true A over IP requires the encoding and
decoding of a so called "Speech Codec Element" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I0e1e2edf47adaa45b22d4b0bcae3640dba7ca200
Expand 3GPP TS 52.021 §9.4.43 Probable Cause with Osmocom-specific value
for PCU version reporting to enable sending it via OML alarms.
Change-Id: If57459c0610f2c7b36d599b13087c8deef8bdd9e
Related: OS#1614
Composing the message type string requires knowing the protocol discriminator.
To ease printing the message type, add this function to switch between the
defined value_string[]s depending on pdisc.
Also publish the message type value_string[]s -- without inline functions to
access them because it is anyway more convenient to use
gsm48_pdisc_msgtype_name() instead.
Since gsm48_pdisc_msgtype_name() is nontrivial, do not add as inline function
-- in case the message type is not known, it needs a static string buffer.
Change-Id: I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
I often want to log the protocol discriminator in the openbsc debug log. It's
more useful to get the name directly instead of looking it up every time.
Change-Id: I0f053e2a4360b27ffccda7cf82469fb1b1cbb3ae
The previous version of this commit got reverted to avoid a breakage in openbsc.
The problem is openbsc use an array of chreq_type with a manual defined size. This array
is using enums as index which breaks if any elements got added into the
middle, because the size of the array can't hold elements greater or
equal than the size.
Change-Id: I6676105507fe4e5627f740dfe4c2770f766ad068
MSCR and CBQ3 are Release 1999 additions to the Control Channel Description IE
of SI3.
Assuming that no-one is using the spare bits, this will not cause any code
conflicts.
In the R99 struct, spare1 and spare2 are in different places, so rather rename
them to spare_1 and spare_2 to make sure we get a compiler barf *if* anyone
tries to use them with the wrong structure.
Adjust the spec reference to TS 44.018; TS 04.08 Figure 10.5.33 is replaced by
TS 44.018 Figure 10.5.2.11.1 which is right there in the named Section
10.5.2.11, so drop the explicit reference.
Motivation: the R99 Control Channel Description defines MSCR to indicate
whether the MSC is R99+ or not. To use UMTS AKA on GSM networks, we want to
indicate that our libmsc is capable of R99, like OsmoSGSN already does.
CBQ3 is merely added for completeness, no particular use case in mind.
Related: OS#1593
Change-Id: If87e07b5d04e1617155383e14c98d2125fdd0608
It accept fixed number of arguments including va_list instead of variable
number of arguments in abis_nm_fail_evt_rep() - similar to vprintff() vs
printf().
Related: OS#1615
Change-Id: Ib293dec1c2de9b664584a8456c782ea7b6dd8555
Add 3GPP TS 12.21 § 8.8.2 Failure Event Report function which pack given
vararg string and parameters into msgb.
Change-Id: I58c198d8ea588432c62520928b08f0b2a7035e93
Related: OS#1615
Add 3GPP TS 12.21 §9.4.43 Probable Cause values of type 03 (Manufacturer
specific values).
Max's note: renamed to make it clear that values are vendor-specific.
Related: OS#1615
Change-Id: Ie9ba4b53fb19a151447aec9ea309284e20613585
This reverts commit c3c28528de.
The reason is that this breaks a static assert in openbsc.
See https://lists.osmocom.org/pipermail/openbsc/2016-December/009906.html
Enlarging the ctype_by_chreq struct and breaks the static assert for
gsm_network->ctype_by_chreq's size:
../../../src/libbsc/gsm_04_08_utils.c:138:1: error: size of array ‘dummyassert_size’ is negative
osmo_static_assert(sizeof(ctype_by_chreq) ==
^
What this patch lacks is, in openbsc.git:
* adjustment of ctype_by_chreq[] according to the new additions in
libbsc/gsm_04_08_utils.c
* same for reason_by_chreq[], also in libbsc/gsm_04_08_utils.c
* enlarge ctype_by_chreq[] in gsm_network to 18, in openbsc/gsm_data.h.
Leaving it up to the original authors to follow up and commit a complete patch
series in one go.
Ericsson uses non standard information element tags when setting
up the SI13 system information configuration. This applies to
RSL_SYSTEM_INFO_13, which is normally 0x28, instead Ericsson
uses RSL_ERIC_SYSTEM_INFO_13, which is set to 0x0C. Furthermore,
Ericsson adds a propritary field called BCCH-Mapping, which is
tagged as 0xf2 (RSL_IE_ERIC_BCCH_MAPPING)
This patch addes these two information element tags in
gsm_08_58.h
Change-Id: Idc27352e286b9b8bbcbf0b31bdb676c3d13487a9
- Add missing message types to be up to date with the
latest specification release (3GPP TS 04.18)
- Add value strings to translate RR message type identifiers
into human readable strings. (see gsm48_rr_msg_name() in
gsm48.h
Change-Id: I3ceb070bf4dc8f5a071a5d43c6aa2d4e84c2dec6
GSM 04.18, which is the successor of GSM 04.08, describes
additional RR 3g specific message types. This commit adds
four new message types related to paging and notifiction
See also 3GPP TS 04.18, section 10.4, table 10.4.1
Change-Id: I071cc9ecac342b5221fa0ec0b782b04b51b40e93
Add GSM48_TA_INVALID which is invalid Timing Advance value according to
3GPP TS 44.018 § 10.5.2.40.
Change-Id: I061760ccac656f39164562a7883f8ab522cd0911
Related: OS#1526
Using the RSL_CHAN_* constants, we sometimes need to add 1 to the chan bits
to indicate e.g. the second TCH/H channel.
RSL_CHAN_NR_1 marks this lowest channel bit that needs to be added.
The name is analogous to RSL_CHAN_NR_MASK.
Change-Id: Iea06432039d1cd23cc6b5acec308bb829b596d47
Check if particular GMM message can be encrypted according to 3GPP TS
24.008 § 4.7.1.2
Related: OS#1582
Change-Id: I7ad0e03c2c738d174dd6bc3453f332eeb8da1e7d
Add function which parses MS network capability IE value for bits
indicating support for particular version of GEA.
Change-Id: I785cef37dd272a2fab9b172f6e1392f865174e9a
Relates: OS#1582
* rename field of struct gsm48_cell_options to better match the spec
* add comments with spec references
* add function for setting DTX in cell options struct
* add necessary enum type
Change-Id: I5a8924f57669c951b2e51b663d95f1d360062a54
Reviewed-on: https://gerrit.osmocom.org/39
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Tested-by: Jenkins Builder
The definitions in this header file (and associated strings in the
c file) are generic about the GPRS Layer3 signalling protocols, and
thus should be part of the library.
Philipp Maier
Harald Welte
Daniel Willmann
Max
Neels Hofmeyr