dump_nse() should only print persistant NSE when persistant_only
argument is set. A NSE can be persistant or dynamic configured.
Depending on the NSE all NS-VC must be the same as the NSE.
Change-Id: Ibd2c6962eda39a850ab61cf347063934378d2fdc
The binds also print a list of associated NSVC when
dumping the bind.
However the binds using their own representation of
printing the NSVC which is different to `show ns entities`.
Use the same function to print NS-VC.
Before:
NSVCI 00000: udp)[127.0.0.1]:23000<>[127.0.0.1]:22000
After:
NSVCI none: UNCONFIGURED DYNAMIC data_weight=1 sig_weight=1 udp)[127.0.0.1]:23000<>[127.0.0.1]:22000
Change-Id: If31ec6c1c07dc134ab1ddeb915bc89747c7be048
Introduce 2 new logging sub systems for signal and unit data.
Unify log messages so all log messages look similiar.
Log also Rx PDUs. Ensure dropped Tx packets (BLOCK/RESET on SNS)
contain *Tx*.
Change-Id: I34b8fde2955ecc010d1dcd9512e1bba9211e2c0d
This fixes some bug introduced in Change-Id I1638f04ba45fef3ba0b237948dff6022267141fb
Related: OS#3373
Change-Id: Ic0873e63f1f046b674c7898480ff070a18a7abc7
the previous commit fixed the state transition, but also caused
neither Tns-alive nor Tns-test to run
Change-Id: I07ea3fd5cec3d4acf4051930a1a3c746d6fd597c
In the IP-SNS SGSN role, we need to inform the BSS of our local
IP endpoints. For statically configured NSEs, those are explicitly
stated on a per-NSE level.
For dynamically created IP-SNS NSEs, we are adding a new VTY
command, using which the administrator can configure which binds
should be advertised as IP endpoints to such BSS.
Change-Id: Id01c29b07e9203c9305f2129361a4f5aaefa2c52
Related: OS#3373
As per 3GPP TS 48.016 section 6.2.4.1, we need to perform some
consistency checks during the SNS-SIZE procedure. Let's implement them.
Change-Id: I1638f04ba45fef3ba0b237948dff6022267141fb
Related: OS#3373
It is the SGSN's job to ensure sufficient NS-VC capacity. As the SGSN
doesn't tell the BSS, we should not make assumptions of only 4.
Change-Id: I41f493643cf51d7853959ab9c7bbc0ffae4e1f4b
The SNS-SIZE sent from BSS to SGSN contains the actual number of local
IP endpoints on the BSS side, and not the maximum number of remote IP
endpoints supported.
Change-Id: I62a8bca4a3f7c47bcb9f292b045fa867d8877a09
In BSS role, we can clear local + remote endpoints when sending
SNS-CONFIG, as we are first.
In SGSN role, we must not clear remote endpoints when sending
SNS-CONFIG, as we are last, and the BSS has just previously told
us its IP endpoints in the BSS-originated SNS-CONFIG.
Change-Id: I58549707ac5a3a0aae5f9348ed76f16c09ad3e46
Related: OS#3373
gprs_ns2_create_nse() doesn't allow the caller to specify if the
BSS or the SGSN role of IP-SNS shall be implemented. Add
gprs_ns2_create_nse2() to fix that.
Change-Id: I6db8c36f7c69b592d7d0fbcf323804f7e9912be2
Related: OS#3373
Clearly separate those states that only occur on the BSS side from
those of the SGSN side (which already have a prefix)
Change-Id: Iebc97637063b2676abff4a7dce50272d9b4e336b
Related: OS#3373
Some functions are only to be called when operating in BSS role,
let's enforce that by sprinkling some OSMO_ASSERT() around.
Related: OS#3373
Change-Id: I20d1bd8df62e0bb84696e291756e2d96acf49246
This adds the core functionality of implementing the SGSN-side of IP-SNS
inside a new FSM. The SGSN-side FSM shares states, events, structures
and code with the BSS-side whenever possible.
Note that this commit does not yet use the SGSN-side FSM, that is part
of subsequent commits.
Closes: OS#3373
Change-Id: I780413ffacd9cb71f64cc38057aae781eeb59b2b
The positions of arguments in the call to "milenage_check" do not
match the ordering of the parameters:
* "ck" is passed to "ik"
* "ik" is passed to "ck"
Let's simply reorder the arguments of milenage_check()
to match the ordering in milenage_f2345().
Change-Id: Ia003d3c9d88fb8f6740791583855a709b8639160
Fixes: CID#220324
This new utility implements the UMTS AKA procedures of the SIM
side. It can be used to manually verify the correctness of
authentication tuples received from the network.
Change-Id: I497747fbf09f633dcd7c592bd9af7fca9a820645
This reverts commit d290439b4a, which
caused "stats values skipped" messages to appear even if they were not
skipped. Revert for now, replace with a proper version in the future.
Related: SYS#4877
Change-Id: Ib43bd53188a4d31d771feb921ea14abe1a3ec877
Every other function returns a pointer to the first byte after the tlv
that was just written.
tl16v seems to be a copy and paste error from tlv16 above and t16lv seems
to count the 16-bit tag twice.
The new tests verify that the return value of *_put(buf, tag, len, val)
points to buf + *_GROSS_LEN(len).
Change-Id: I268a7e11fb5dce67ce1bd7974ab86c4d2bd002f7
Let the user know when the stats were not consumed fast enough for the
given FIFO length.
Related: SYS#4877
Change-Id: If0e8ab55103007693101538fb6ea310075217774
Move test output from stdout to stderr and enable logging to stderr.
This is in preparation for the next patch, which will add a new log
message when osmo_stat_item_get_next() skips a value.
Related: SYS#4877
Change-Id: Ie0eaec2f93ac6859397a6bfca45039fdcc27cb9e
Setting the NSE dialect possibly involves the creating (or destruction)
of a IP-SNS FSM. Encapsulate that, rather than having every caller
re-implement that.
Change-Id: I24fdc26fbcfda039bd58ea166f4d5c2fd1801da1
We should never report multiple values for a metric. It is confusing for
the log reporter and wrong for statsd. Statsd will record only one value,
but will it be the first, last, ...?
This can happen if an osmo_stat_item changes more than once within the
same reporting interval.
With this patch only one aggregate value is sent to the log reporters.
The value reported is the maximum during this interval. Other
aggregations could be possible (min, last), but reporting a (useful)
average is not because the values don't include a timestamp and most
osmo_stat_items change at unregular intervals.
Change-Id: I366ab1c66f4ae6363111ea4e41b66b7d5bcade9c
Related: SYS#4877
Let's move computing of the local IP endpoints to a separate function,
so it can not only be used when entering the SNS_SIZE state. Preparation
for SGSN-side IP-SNS.
Change-Id: I5d7ce419135a8ef538cf9abcb76a49049ed7d5f9
Related: OS#3373
We've used up all but one "library reserved" VTY nodes at this point,
and we should definitely add some more reserved nodes in the next
libosmovty ABI version / release.
Change-Id: Idfe1e7d97f3f29fc219e80dcb6ce6bb768733adf
We don't really handle inbound SNS-ACK yet (as we don't originate
SNS ADD/DEL/CHGWEIGHT procedures yet). However, the message
receive code should already dispatch those events to the FSM,
just like we do for the (equally unimplemented) handling of inbound
SNS-SIZE which is already dispatched to the FSM.
Change-Id: If6d5f96d85e6f05534fe49376f4473d912535ad4
We already have similar log statements for all NS-{RESET,BLOCK,UNBLOCK,...}
and it's confusing that even a debug-level NS log file doesn't show
transmitting SNS messages at all.
Change-Id: I0d31c3911d3acd6ac7296c370e920d53412d8289
When freeing the NS-VC there are cases when the NSE is still alive.
This means that gprs_ns2_free_nsvc() calls ns2_prim_status_ind(),
which in turn calls ns2_count_transfer_cap(). The latter must deal
with such a situation rather than OSMO_ASSERT()
Change-Id: I4f32dee705c9886717339fe7cce5b4cd8d2c18f7
To support SGSN oriented RESET introduce a role flag to
track what's running the gprs_bssgp (local side).
Related: OS#3879
Change-Id: Ibcbaffa94cbdc4296a8a7c372304ac11d50d9559
Seen building on RPI4 32 bits raspbian:
error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘size_t’ {aka ‘unsigned int’} [-Werror=format=]
Change-Id: I62199bfc7f3a78403334f5580f31fa5743223c9b
Alexander Couzens
Harald Welte
Vadim Yanitskiy
Oliver Smith
Daniel Willmann
Pau Espin