The library specific sub-systems are kind of special, because their
position in the 'osmo_log_info' may vary depending on the number of
application specific sub-systems. This is why their associated
constant values (like DLGLOBAL) are negative, and this is what
the LOGP() macro expects as the first argument.
Before this change, invoking 'logp' command with any library
specific logging sub-system would result in getting messages
printed with the fall-back DLGLOBAL sub-systems.
Change-Id: If86563e169fe1243adfa7b09c9d65d9f88c8a99e
This is a partial revert of b27b352e ("stats: Use a global index for
stat item values"). Now that osmo_stat_item_get_next correctly returns
how many values have been skipped, we can use the accurate asserts on
its return value again.
Fix the initial values of next_id_a,b (1 instead of 0), so we don't get
a skipped value on the first read. This is needed, because b27b352e
refactored osmo_stat_item_get_next to have the next id as parameter
instead of the last read one, and the initial value was not adjusted in
the tests.
Related: OS#5088
Change-Id: I9d4cda2487a62f52361c24058363dfa90e502c63
Fix counting of values missed because of FIFO overflow in
osmo_stat_item_get_next(), by assigning a new item value id effectively
as item->value[n + 1].id = item->value[n].id + 1, instead of increasing
a global_value_id that is shared between all items and groups. With
global_value_id, the count of values missed was wrong for one item, as
soon as a new value was added to another item.
This partially reverts b27b352e ("stats: Use a global index for stat
item values") from 2015, right after stats was added to libosmocore. It
was supposed to make multiple readers (reporters) possible, which could
read independently from stat_item (and later added comments explain it
like that). But this remained unused, stats has implemented multiple
reporters by reading all stat_items once and sending the same data to
all enabled reporters. The patch caused last_value_index in struct
osmo_stat_item to always remain at -1.
Replace this unused last_value_index with stats_next_id, so stats can
store the item-specific next_id in the struct again. It appears that
stats is the only direct user of osmo_stat_item, but if there are
others, they can bring their own item-specific next_id: functions in
stat_item.c still accept a next_id argument.
Related: OS#5088
Change-Id: Ie65dcdf52c8fc3d916e20d7f0455f6223be6b64f
Let osmo_stat_item_get_next, osmo_stat_item_discard,
osmo_stat_item_discard_all consistently refer to their next_id arg as
such (and not idx or next_idx). It refers to an ID (item->values[i].id),
not an index (item->values[i]), and it is always the next one, never the
current one.
Do the same change for _index/_idx variables in stats.c, which are used
as arguments to these functions. Replace rd_ with next_id_ in
stats_test.c, too.
Related: OS#5088
Change-Id: I5dd566b08dff7174d1790f49abd2d6ac020e120e
The binds also print a list of associated NSVC when
dumping the bind.
However the binds using their own representation of
printing the NSVC which is different to `show ns entities`.
Use the same function to print NS-VC.
Before:
NSVCI 00000: udp)[127.0.0.1]:23000<>[127.0.0.1]:22000
After:
NSVCI none: UNCONFIGURED DYNAMIC data_weight=1 sig_weight=1 udp)[127.0.0.1]:23000<>[127.0.0.1]:22000
Change-Id: If31ec6c1c07dc134ab1ddeb915bc89747c7be048
Introduce 2 new logging sub systems for signal and unit data.
Unify log messages so all log messages look similiar.
Log also Rx PDUs. Ensure dropped Tx packets (BLOCK/RESET on SNS)
contain *Tx*.
Change-Id: I34b8fde2955ecc010d1dcd9512e1bba9211e2c0d
This reverts commit d290439b4a, which
caused "stats values skipped" messages to appear even if they were not
skipped. Revert for now, replace with a proper version in the future.
Related: SYS#4877
Change-Id: Ib43bd53188a4d31d771feb921ea14abe1a3ec877
Every other function returns a pointer to the first byte after the tlv
that was just written.
tl16v seems to be a copy and paste error from tlv16 above and t16lv seems
to count the 16-bit tag twice.
The new tests verify that the return value of *_put(buf, tag, len, val)
points to buf + *_GROSS_LEN(len).
Change-Id: I268a7e11fb5dce67ce1bd7974ab86c4d2bd002f7
Let the user know when the stats were not consumed fast enough for the
given FIFO length.
Related: SYS#4877
Change-Id: If0e8ab55103007693101538fb6ea310075217774
Move test output from stdout to stderr and enable logging to stderr.
This is in preparation for the next patch, which will add a new log
message when osmo_stat_item_get_next() skips a value.
Related: SYS#4877
Change-Id: Ie0eaec2f93ac6859397a6bfca45039fdcc27cb9e
We should never report multiple values for a metric. It is confusing for
the log reporter and wrong for statsd. Statsd will record only one value,
but will it be the first, last, ...?
This can happen if an osmo_stat_item changes more than once within the
same reporting interval.
With this patch only one aggregate value is sent to the log reporters.
The value reported is the maximum during this interval. Other
aggregations could be possible (min, last), but reporting a (useful)
average is not because the values don't include a timestamp and most
osmo_stat_items change at unregular intervals.
Change-Id: I366ab1c66f4ae6363111ea4e41b66b7d5bcade9c
Related: SYS#4877
Seen building on RPI4 32 bits raspbian:
error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘size_t’ {aka ‘unsigned int’} [-Werror=format=]
Change-Id: I62199bfc7f3a78403334f5580f31fa5743223c9b
Let's use log_set_print_filename2() API instead, which has less ackward
behavior implications like changing the print status of category-hex.
Related: OS#5034
Change-Id: Ifc78e1dcba5baf0b41f6ccbbbd1e3f06552d73da
This will alow easily changing default values for print_category vs
print_category_hex later.
In any case, every test relying on logging output validation should
always explicitly state the config to avoid issues in the future if
default values change.
Related: OS#5034
Change-Id: If29b40557d5c2bcda04b964f344070bad58d8f28
Implement the load sharing based on modulo of the LSP. As long the gprs_ns2 doesn't
support the resource distribution function (48.016 § 4.4a) this simple
approach is good enought.
Fixes: OS#4836
Change-Id: I8c2fe5d647694886ac600470fca6ea5d5d210a85
Introduce a `ip-sns-bind BINDID` vty command within a `nse` vty object.
The ip-sns-bind defines the binds which will be used by the dynamic
configuration with IP-SNS.
This is only the first part which only uses the binds when doing a
new SNS configuration.
The outgoing add procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
This is a behaviour change of the API and must be synchronized with
the osmo-pcu. Otherwise SNS won't work with osmo-pcu.
Related: SYS#5354
Change-Id: I9ab8092bf286e7d90e92f5702a5404425e959c84
The BSSGP layer needs to know the MTU of the NS UNIDATA payload.
The MTU can be 0 if the NSE doesn't contain any NSVC.
Every status indication will contain the mtu value.
The MTU in the status indication contains the maximum transfer
unit of a BSSGP message. From NS side the maximum SDU.
Related: OS#4889
Change-Id: I5016b295db6185ec131d83089cf6c806e34ef1b6
CGI-PS type doesn't exist in GSM 08.08 Cell Id lists. That type of cell
id is osmocom-specific and used internally. In here CGI-PS is
automatically converted to CGI (since the later is an extension of this
one).
The encode/decode_cell_id_u are left intact (comment added) since those
can still be used (and are used by RIM code) to encode/decode TS 48.018
Cell Identifiers.
Related: SYS#4909
Change-Id: Id74f4577c397c1ba696f00395858311bd82cb2c8
write config will not print out any configuration for bind/nse unless we
configure some. This way we can catch more issues with incompatible
configs such as https://gerrit.osmocom.org/c/libosmocore/+/22878
Change-Id: Iad422ee013c82a6cb96af8ce4eb3af8b0936a4c9
Related: OS#4887
Allow to assign a signalling and data weight to UDP binds.
Those weights will be used when doing dynamic configuration over
IP-SNS.
This is only the first part which only uses the assigned weights
when doing a new SNS configuration.
The outgoing change weight procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
Related: SYS#5354
Change-Id: I5133e4229377d44772a9af28628a2bc420fea34b
Using 'uint8_t' for the length argument is definitely a bad idea.
Because of this, packing more than 255 septets would not work as
expected. Deprecate the old function and use 'size_t' instead.
Change-Id: Ib1aac538afeb0a5c76a1df472d555139a496e12e
As can be seen, this unit test reveals problems with encoding
of more than 250 septets using gsm_7bit_encode_n(). The problem
is that some API functions use type 'uint8_t' for the length, so
we basically suffer from integer overflows.
Change-Id: I723300578d5ab0c7b94cf49c14d962b2dbf47740
Avoid code duplication between three different drivers by sharing
the "core" of the bind initialization in a new, shared ns2_bind_alloc().
Change-Id: I535fc68e94fcd695de827dd922706adc1c5a2cb7
All public enum should have the prefix GPRS_NS2_.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: I548ff12f7277cbb7e1a630a3dc02b738ce89be72
All functions which are exposed by gprs_ns2_internal.h should not contain
the public prefix gprs_. Internal function should only contain ns2_ prefix.
Change-Id: Icecc5a918902cd10efac72bbac20780d39aab272
Prepare to set -std=gnu89 in a future commit, which will cause gcc warn
about "control reaches end of non-void function" in main().
Change-Id: I7c33cac30e5859060f083813d8433011f5eaf0d0
[ 352s] gb/gprs_ns2_test.c: In function 'test_block_unblock_nsvc':
[ 352s] gb/gprs_ns2_test.c:200:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
[ 352s] for (int i=0; i<2; i++) {
[ 352s] ^
[ 352s] gb/gprs_ns2_test.c:200:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
Change-Id: I72310886bef4db635078b75715c9d98ee45391cc
The vty should be able to block or unblock a specific NSVC.
Further more this case is special for the UNITDATA as those
can be still received until the other side response to the BLOCK PDU.
Related: OS#4939
Change-Id: Ic0ce3c5fabc8644cc1ee71a8f6dd783fadf7b84d
free_bind() should free up all driver specific state but NOT
the bind itself. As the only thing left is clearing the pdus
rename the function to it.
Change-Id: Iac506734c93aca8be045ac13788d07d1bdc78eb3
The function bssgp_parse_rim_ri() and bssgp_create_rim_ri() are located
in gprs_bssgp.c, since there is now a gprs_bssgp_rim.c module it makes
more sense to put them there. Also adjust the code a bit so that its
more intuitive to read.
Change-Id: Icd667f41d5735de56cd9fb257670337c679dd258
Related: SYS#5103
BSSGP RIM uses a number of nested containers to signal RIM application
specific payload information in a generic way. Lets add the container
structurs required for NACC.
Depends: libosmocore If48f412c32e8e5a3e604a78d12b74787a4786374
Change-Id: Ibbc7fd67658e3040c12abb5706fe9d1f31894352
Related: SYS#5103
The libosmocore TLV parser had a number of insufficient bounds checks
leading to reads beyond the end of the respective input buffer.
This patch
* adds proper out-of-bounds checks to all TLV types
* simplifies some of the existing checks
* introduces test cases to test all the corner cases
where either TAG, or length, or value are not fully contained
in the input buffer.
Thanks to Ilja Van Sprundel for reporting these problems.
Change-Id: I98b02c914c9e3ecf56050af846292aa6979d7508
This adds an inter-thread queue "it_q" to libosmocore. With it_q,
one can perform thread-safe enqueing of messages to another thread,
who will receive the related messages triggered via an eventfd
handled in the usual libosmocore select loop abstraction.
Change-Id: Ie7d0c5fec715a2a577fae014b0b8a0e9c38418ef
Pau Espin
Harald Welte
Vadim Yanitskiy
Oliver Smith
Alexander Couzens
Daniel Willmann
Philipp Maier