At the moment libosmogb offers no convinient way to send RIM PDUs. Also
parsing an incoming RIM messages into destination, source routing
info and RIM container is not available.
Change-Id: I18134fd9938040d2facb6beee3732628b167ce8c
Related: SYS#5103
BSSGP RIM uses a number of nested containers to signal RIM application
specific payload information in a generic way. Lets add the container
structurs required for NACC.
Depends: libosmocore If48f412c32e8e5a3e604a78d12b74787a4786374
Change-Id: Ibbc7fd67658e3040c12abb5706fe9d1f31894352
Related: SYS#5103
The RIM Routing Information IE (see also 3GPP TS 48.018, section
11.3.70) is used to control the flow of BSSGP rim messages at the SGSN.
Change-Id: I6f88a9aeeb50a612d32e9efd23040c9740bc4f11
Related: SYS#5103
The IP-SNS requires at least one initial remote address of the SGSN.
However it should be multiple initial remote address instead of a single
in case the interface might fail.
Rework the SNS to support multiple initial remote addresses.
Change-Id: I71cdbfb53e361e6112fed5e2712236d797ef3ab2
Every bind will have a unique name. Add a name argument
to all bind creating functions and require them to be unique.
This is an API break but there wasn't yet a release with NS2.
Change-Id: I8f1d66b7b3b12da12db8b5e6bd08c1beff085b3e
A NS dialect describes how the NS Entity interacts with
different virtual circuits. E.g. ipaccess use reset/block on udp
and is a dynamic connection.
A single NS Entity can only support one dialect. This can be later
used to protect a NS Entity against dynamic NS virtual circuits of a
different type.
It further allows a bind to support multiple dialects at the same time.
Change-Id: Ia118bb6f994845d84db09de7a94856f5ca573404
Similar to ns2 superseding ns, we now also intoduce a next generation
of BSSGP related code to libosmogb. However, this is not aiming to
be a full implementation yet, but simply those parts that we currently
need from the revamped osmo-gbproxy.
The gprs_bssgp2.[ch] differs in two ways from the old code:
* it separates message encoding from message transmission
* it supports more recent specs / IEs
bssgp_bvc_fsm.c is a genric implementation of the BSSGP BVC
RESET/BLOCK/UNBLOCK logic with support for both PTP and signaling,
both on the SGSN side and the BSS side.
Change-Id: Icbe8e4f03b68fd73b8eae95f6f6cccd4fa9af95a
Add support for frame relay over dahdi hdlc device.
It's supporting lmi by q933 and supports both
SGSN and BSS.
Change-Id: Id3b49f93d33c271f77cd9c9db03cde6b727a4d30
It's more clear which part of the address is returned.
In preparation to add a gprs_ns2_ip_vc_local.
Change-Id: I6110ff573362961c713a990da7ef3f3dbedf6c57
Add bssgp_ns_send callback() to set the transmission path into the
NS library. This allows to use the Gb implementation with
the old NS and the new upcoming NS implementation.
Users of the old NS implementation don't have to set the callback as
the default is the old NS implementation.
Only users of the new NS implementation need to set the callback and
the callback data.
Change-Id: I3a498e6a0d68b87fed80c64199b22395796761b4
If a BVC-RESET is sent from SGSN, there must not be a cell ID IE
included. See "Note 1" of TS 48.018 Section 10.4.12.
Change-Id: I11d4e70d510265b9c09dffccdab10b3f0816715a
So far we had a function to allocate a new bssgp_bvc_ctx, but not
the opposite one. Let's finally introduce it, so it will be used
at least in OsmoPCU.
Please note that the new symbol has 'bssgp_' prefix, not 'btsctx_'.
Change-Id: Ia78979379dbdccd6e4628c16f00d0c06d9212172
We have a habit of returning static buffers from some functions,
particularly when generating some kind of string values. This is
convenient in terms of memory management, but it comes at the expense
of not being thread-safe, and not allowing for two calls of the
related function within one printf() statement.
Let's introduce _c suffix versions of those functions where the
caller passes in a talloc context from which the output buffer shall
be allocated.
Change-Id: I8481c19b68ff67cfa22abb93c405ebcfcb0ab19b
We have a number of static buffers in use in libosmo*. This means
the related functions are not usable in a thread-safe way. While
we so far don't have many multi-threaded programs in the osmocom
universe, the static buffers also prevent us from calling the same
e.g. string-ify function twice within a single printf() call.
Let's make sure there's an alternative function in all those cases,
where the user can pass in a caller-allocated buffer + size, and make
the 'classic' function with the static buffer a wrapper around that
_buf() variant.
Change-Id: Ibf85f79e93244f53b2684ff6f1095c5b41203e05
The NS implementation part of the Gb implementation libosmogb
so far implemented a rather classic dialect of Gb, with lots of
heritage to FR (Frame Relay) transports. At least since Release 6
of the NS specification, there's an IP Sub-Network Service (SNS),
which
* permits for dynamic configuration of IP endpoints and their NS-VCs
* abandons the concept of a NSVCI on IP transport
* forbids the use of RESET/BLOCK/UNBLOCK procedures on IP transport
This commit introduces BSS-side IP-SNS support to libosmogb in a
minimally invasive way. It adds a corresponding SNS FSM to each NS
instance, and implements the new SIZE/CONFIG/ADD/DELETE/CHANGE_WEIGHT
procedures very closely aligned with the spec.
In order to use the SNS flavor (rather than the classic one),
a BSS implementation should use gprs_ns_nsip_connect_sns() instead
of the existing gprs_ns_nsip_connect().
This implementation comes with a set of TTCN-3 tests in
PCU_Tests_RAW_SNS.ttcn, see Change-ID
I0fe3d4579960bab0494c294ec7ab8032feed4fb2 of osmo-ttcn3-hacks.git
Closes: OS#3372
Closes: OS#3617
Change-Id: I84786c3b43a8ae34ef3b3ba84b33c90042d234ea
To reset the state of BSSGP allow to flush the BSSGP queues.
When testing (with TTCN3) the test object should be resetted between
each test.
Introduce the functions:
bssgp_fc_flush_queue() - flushs a single flow control object
bssgp_flush_all_queues() - flushs queues of all BSSGP connections
Change-Id: I29b6ad6742ddf9b0b58b4af37d9a1cf18e019325
Add gsm48_encode_ra() which takes appropriate struct as [out] parameter
instead of generic buffer. Using uint8_t buffer instead of proper struct
type prooved to be error-prone - see Coverity CID57877, CID57876.
Old gsm48_construct_ra() is made into tiny wrapper around new
function. The test output is adjusted because of the change in function
return value which was constant and hence ignored anyway.
Related: OS#1640
Change-Id: I31f9605277f4945f207c2c44ff82e62399f8db74
Add value strings for Service Control PDUs according to 3GPP TS 48.016 §9
and use them for logging.
Change-Id: I0ea3a45f35d68619d4cfa9735ef77abd9f9f0d58
Related: SYS#3610
This function originates from openbsc/src/gprs but is just specific
to BSSGP/Gb on the same level like bssgp_msgb_alloc.
This commit puts the former gprs_msgb_copy function beside
bssgp_msgb_alloc.
Renamed function:
gprs_msgb_copy -> bssgp_msgb_copy
Sponsored-by: On-Waves ehf
Currently the return value of the gprs_ns_tx family of functions is
often ignored. This is not a serious issue, since the successful
delivery of the messages is neither guaranteed nor acknowledged by
the network layer anyway.
Nevertheless this commit adds logging (level INFO) to gprs_ns_tx and
gprs_ns_msgb_alloc. The definition of the latter has been moved from
the header file to gprs_ns.c.
Fixes: Coverity CID 1040678, 1040679, 1040680, 1040681, 1040682,
1040683, 1040684, 1040686, 1040687, 1040688, 1111545,
1240203, 1240204
Sponsored-by: On-Waves ehf
Adds the functions gprs_ns_ll_copy() and gprs_ns_ll_clear(). Renames
gprs_ns_format_peer() to gprs_ns_ll_str(). All of these functions
uniformly access the link layer part within the NS-VC objects.
Sponsored-by: On-Waves ehf
Register an osmo signal handler to print a short notice about every
SS_L_NS signal that is generated while processing the tests.
Sponsored-by: On-Waves ehf
Philipp Maier
Alexander Couzens
Harald Welte
Daniel Willmann