When a bad GSM voice frame is received, it's being replaced
by a silence frame. This may cause unpleasant audio effects.
This change implements a functionality to craft a replacement
frame from the last known good frame. Currently, only FR is
supported, support for other codecs may be added latter.
Change-Id: I06a21f60db01bfe1c2b838f93866fad1d53fdcd1
In case of embedded build some tests are failing to link properly. Fix
it:
* do not run fsm_test unless CTRL is enabled
* do not run fr_test unless GB is enabled
* do not link loggingrb_test with libosmovty
Change-Id: Icedad5ba3ed311ccdb97fa3ccd3002f5fda8be68
* remove duplicate code: use function from libosmocore
* use utility function to dump ubits
* reformat for easier reading
* link against libosmocore
Change-Id: I8c31b0954176a2c53305936a025c92a793b6d9b6
The testsuite fails on some specific build machines in the OBS
build cluster. Let's try to figure out which CPU flags they have
to narrow down the cause of this.
Change-Id: Ib23e5bfb3c894206fad62d6cc6151583b1bb75a6
According to
https://www.gnu.org/software/automake/manual/automake.html#Libtool-Flags
the libraries supposed to be added to *_LDADD or *_LIBADD
while *_LDFLAGS should contain additional libtool linking
flags. Previously we used both. Let's unify this and move all the
libraries into proper automake variable. While at it - also add
libosmocore.la for tests to LDADD since all the tests link against it
anyway.
Change-Id: Ia657a66db75df831421af5df1175a992da5ba80f
This function is actively used by OsmoPCU but have not been covered by
tests so far. The test code is based on
Minh-Quang Nguyen <minh-quang.nguyen@nutaq.com> submission with some
modifications.
The test's FIXME will be addressed in follow-up patches.
Change-Id: I2ee544256b8675bc62a42493aab66a8eeee54f90
Related: OS#1526
Add GSM23003_IMSI_MIN_DIGITS definition.
Add regression test gsm23003_test.c to test the two new functions.
Will be used by OsmoHLR to validate VTY and CTRL input.
Change-Id: I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522
The recent exit-by-indent patch breaks a VTY case where a node is entered but
directly followed by a sibling or ancestor without listing any child nodes.
Regression introduced by I24cbb3f6de111f2d31110c3c484c066f1153aac9.
An example is a common usage in osmo-bts, where 'phy N' / 'instance N' is a
parent node that is commonly left empty:
phy 0
instance 0
bts 0
band 1800
Before this patch, this case produces the error:
There is no such command.
Error occurred during reading the below line:
bts 0
Fix indentation parsing logic in command.c to accomodate this case.
Add a unit test for empty parent node.
Change-Id: Ia0880a17ae55accb092ae8585cc3a1bec9986891
Note: This will break users' config files if they do not use consistent
indenting. (see below for a definition of "consistent".)
When reading VTY commands from a file, use indenting as means to implicitly
exit child nodes. Do not look for commands in the parent node implicitly.
The VTY so far implies 'exit' commands if a VTY line cannot be parsed on the
current node, but succeeds on the parent node. That is the mechanism by which
our VTY config files do not need 'exit' at the end of each child node.
We've hit problems with this in the following scenarios, which will show
improved user experience after this patch:
*) When both a parent and its child node have commands with identical names:
cs7 instace 0
point-code 1.2.3
sccp-address osmo-msc
point-code 0.0.1
If I put the parent's command below the child, it is still interpreted in the
context of the child node:
cs7 instace 0
sccp-address osmo-msc
point-code 0.0.1
point-code 1.2.3
Though the indenting lets me assume I am setting the cs7 instance's global PC
to 1.2.3, I'm actually overwriting osmo-msc's PC with 1.2.3 and discarding the
0.0.1.
*) When a software change moves a VTY command from a child to a parent. Say
'timezone' moved from 'bts' to 'network' level:
network
timezone 1 2
Say a user still has an old config file with 'timezone' on the child level:
network
bts 0
timezone 1 2
trx 0
The user would expect an error message that 'timezone' is invalid on the 'bts'
level. Instead, the VTY finds the parent node's 'timezone', steps out of 'bts'
to the 'network' level, and instead says that the 'trx' command does not exist.
Format:
Consistent means that two adjacent indenting lines have the exact
same indenting characters for the common length:
Weird mix if you ask me, but correct and consistent:
ROOT
<space>PARENT
<space><tab><space>CHILD
<space><tab><space><tab><tab>GRANDCHILD
<space><tab><space><tab><tab>GRANDCHILD2
<space>SIBLING
Inconsistent:
ROOT
<space>PARENT
<tab><space>CHILD
<space><space><tab>GRANDCHILD
<space><tab><tab>GRANDCHILD2
<tab>SIBLING
Also, when going back to a parent level, the exact same indenting must be used
as before in that node:
Incorrect:
ROOT
<tab>PARENT
<tab><tab><tab>CHILD
<tab><tab>SIBLING
As not really intended side effect, it is also permitted to indent the entire
file starting from the root level. We could guard against it but there's no
harm:
Correct and consistent:
<tab>ROOT
<tab><tab>PARENT
<tab><tab><tab><tab>CHILD
<tab><tab>SIBLING
Implementation:
Track parent nodes state: whenever a command enters a child node, push a parent
node onto an llist to remember the exact indentation characters used for that
level.
As soon as the first line on a child node is parsed, remember this new
indentation (which must have a longer strlen() than its parent level) to apply
to all remaining child siblings and grandchildren.
If the amount of spaces that indent a following VTY command are less than this
expected indentation, call vty_go_parent() until it matches up.
At any level, if the common length of indentation characters mismatch, abort
parsing in error.
Transitions to child node are spread across VTY implementations and are hard to
change. But transitions to the parent node are all handled by vty_go_parent().
By popping a parent from the list of parents in vty_go_parent(), we can also
detect that a command has changed the node without changing the parent, hence
it must have stepped into a child node, and we can push a parent frame.
The behavior on the interactive telnet VTY remains unchanged.
Change-Id: I24cbb3f6de111f2d31110c3c484c066f1153aac9
These PRBS sequences are specified in ITU-T O.150. They are typically
used as test data to be transmitted for BER (bit error rate) testing.
Change-Id: I227b6a6e86a251460ecb816afa9a7439d5fb94d1
We need to have an architecture-independend way of endian conversion /
byte swapping functions which will also work on embedded (bare iron)
builds. Let's introduce osmocom/core/bytesawp.h for this purpose.
Change-Id: Ibc0cc1e36d4ed63a35cf8ceff3af0f26e5ac7a3d
This change extends the convolutional code test coverage, adding
the GSM 05.03 specific test vectors, generated by the conv_gen.py.
Inspired by Tom's patch:
http://lists.osmocom.org/pipermail/openbsc/2014-April/007364.html
Change-Id: I76d1cd4032d2f74c5bb93bde4fab99aa655b7f1a
* data structure representing 3GPP TS 52.021 §9.4.62 SW Description
* function to serialize it into msgb
* function to deserialize it from buffer
* functions to extract/estimate buffer size for SW Description
* test harness (partially taken from OpenBSC)
There are several similar functions to deal with SW Description in
OpenBSC, there's also need to use similar functionality in
OsmoBTS. Hence it's better to put the code into common library with
proper tests and documentation.
Change-Id: Ib63b6b5e83b8914864fc7edd789f8958cdc993cd
Related: OS#1614
Sometimes (particularly when testing), we may want to parse+execute an
arbitrary control command simply form a string buffer, rather than from
a msgb. Let's add a helper for that.
Change-Id: Iaca748e0d942bb2a1ee7c2776b37485e1439eb0c
Add test for osmo-auc-gen invocations to ensure stability across upcoming SQN
increment scheme changes.
The test comprises of a shell script that invokes the osmo-auc-gen binary with
various milenage parameters, of which the stdout/stderr are verified.
More osmo-auc-gen invocations could be added, but my main focus is on the SEQ
changes. Instead of manually testing that it still works for each SQN patch, I
want this test to do it for me.
To make sure that osmo-auc-gen is build before the tests are launched, place
'utils' before 'tests' in the root Makefile.am.
Related: OS#1968
Change-Id: Ib4af34201cd2e7d76037bcd31dd89ef18c1a9aec
There are some projects, such as GR-GSM and OsmocomBB, which would
benefit from using one shared implementation of GSM 05.03 code. So,
this commit introduces a new sub-library called libosmocoding, which
(for now) provides GSM, GPRS and EDGE transcoding routines, migrated
from OsmoBTS.
The original GSM 05.03 code from OsmoBTS was relicensed under
GPLv2-or-later with permission of copyright holders (Andreas Eversberg,
Alexander Chemeris and Tom Tsou).
The following data types are currently supported:
- xCCH
- PDTCH (CS 1-4 and MCS 1-9)
- TCH/FR
- TCH/HR
- TCH/AFS
- RCH/AHS
- RACH
- SCH
Change-Id: I0c3256b87686d878e4e716d12393cad5924fdfa1
To be able to add some more tests, related to convolutional coding,
without duplication of code, the test logic was separated from the
conv_test.c into conv.c and conv.h.
Change-Id: Idbdc7e19cb9b9a36cd1fccd621cd858e87530d98
Use value_string for enum ctrl_type instead of custom code. Add
corresponding unit tests.
Related: OS#1615
Change-Id: Icd4e96dd9f00876cb70b43cfcf42ab4f10311b28
Configure logging to be deterministic and add stderr checking to testuite.at.
However, exclude the thousands of message modification log lines from the log
to not have a huge test expectation file.
Change-Id: I0dd7112967a64a168556b62e5ec15107b7608ffb
The write queue was always meant to not queue more than the
max_length messages but the implementation never rejected a
message.
Begin to log and enforce the queue size limit, add a testcase
to verify the code and initialize except_cb as part of a fix
for that new test case.
Real applications might now run into the queue limit and drop
messages where they just queued them before. It is unfortunate
but I still think it is good to implement the routine as it was
intended. We need to review osmo_wqueue_enqueue once more to
see that no msgb is leaked.
Change-Id: I1e6aef30f3e73d4bcf2967bc49f0783aa65395ae
Numerous issues caused sim_test to be attempted even though libosmosim was not
built:
In configure.ac, the ENABLE_PCSC variable lacked an AC_SUBST() to be exported.
Furthermore in configure.ac, no value 'yes'/'no' was assigned to the
ENABLE_PCSC variable, only to the enable_pcsc value.
In testsuite.at, encapsulating the sim_test in 'if ENABLE_PCSC' seems to have
no effect, regardless (not even when using a variable that should be defined
accurately).
So fix with these steps, similarly to how we do it in openbsc:
In AC_ARG_ENABLE, directly use 'ENABLE_PCSC' to assign 'yes'/'no'.
Export the same using AC_SUBST().
Add tests/atlocal.in to translate ENABLE_PCSC to enable_sim_test (also add
atlocal to AC_OUTPUT and distclean).
Use enable_sim_test in testuite.at, as seen in openbsc: use AT_CHECK() to
indicate skipping the test if enable_sim_test isn't 'yes'.
Change-Id: I9e8740c7d2dfbd272e22fee85972ef3fda7184a8
Add src/gsm/libosmogsm.la explicitly to some test linkages, because otherwise
the linker would pick the libosmogsm already installed on the system instead of
the one that was just built in the source tree.
I noticed because a libosmogsm needing some more symbols from libosmocodec was
still installed, while the patch that cause it was already removed. Thus I
caught all(?) test binaries that linked libosmogsm from $PREFIX.
Change-Id: Ie61d60e1506f16de20add70fd0f44ebfa7a00a75
Corresponding test code include both official test vectors from the
specs and data from over-the-air tests.
This obsoletes libosmo-crypt-a53 as it was last missing piece
unimplemented in libosmogsm.
Change-Id: I939e4f6b91b4a7c591ef3761fe2d46ed1c2fb2d3
Related: OS#1582
This code is supposed to formalize some of the state machine handling in
Osmocom code.
Change-Id: I0b0965a912598c1f6b84042a99fea9d522642466
Reviewed-on: https://gerrit.osmocom.org/163
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
* add functions to encode/decode various codec paramters from RTP payload with
AMR frame according to RFC 4867
* those functions are extended version based on code from osmo-bts'
amr.c by Andreas Eversberg
* add corresponding enum types and strings for logging
* add regression tests
It's useful both to replace manual parsing in osmo-bts with fuctions
covered by test suite and as a debugging helpers for issues related to
AMR.
Change-Id: Ia217679a07d3fbc970f435e20f6eac33d34bd597
Related: OS#1562
Reviewed-on: https://gerrit.osmocom.org/118
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Move those routines from OpenBSC to libosmogsm, so they can be
re-used from other programs. I think it was a mistake to add them only
inside the openbsc repository in the first place. We need to pay more
attention to this in the future.
Add python utility to generate .c code with convolutional
encoder/decoder based on polynomial description of the code. If argument
given it'll be interpreted as intended output directory, otherwise
current working directory is used.
Codes for *CCH, CS2/3 and TCH/AFS are generated. Corresponding manual
implementations are removed from tests. This introduce build-time
dependency on python.
The main work for this patch was generously contributed by Sylvain
Munaut.
Fixes: OS#1629
Add bit map encoder and decoder functions: decoder is fully functional
while encoder is good enough for testing - no backtracking to find
the best possible compression is implemented. If somebody is willing to
implement MS side of EDGE than this has to be expanded.
Add corresponding tests.
N. B: the encoding is implemented according to ETSI TS 44.060 which is
slightly different from T4 used for fax according to CCITT G31D (RFC 804).
Ticket: OW#2407
Sponsored-by: On-Waves ehf
Signed-off-by: Max <msuraev@sysmocom.de>
This tests several API functions of the msgb by checking the
invariant and by dumping resulting message buffers as hex.
Sponsored-by: On-Waves ehf
Conflicts:
tests/Makefile.am
The new functions bitvec_get_bytes and bitvec_set_bytes copy
byte sequences from bitvecs to uint8_t arrays and vice versa.
While the bytes in the bitvecs do not need to be aligned, the uint8_t
arrays always are. In case the bytes in the bitvec are aligned, the
implementation uses memcpy.
Note that the implementation like the other existing functions assume
MSB first encoding.
[hfreyther: Squash the comment fix into this commit as well]
Sponsored-by: On-Waves ehf
These functions are currently part of openbsc but also needed by
other projects.
The function have been renamed as follows:
gprs_apn_to_str -> osmo_apn_to_str
gprs_str_to_apn -> osmo_apn_from_str
Sponsored-by: On-Waves ehf
Shipping our own private copy of talloc was a good idea in 2008,
when it was not readily available on most target platforms. Today,
the situation is quite different, as it is a standard library on
major Linux distributions.
The addition of libosmovty.la to several test cases as done in
commit 738d9e2210 (stats: Add vty_out_stat_item_group)
is not needed.
This commit removes them.
Sponsored-by: On-Waves ehf
This commit adds instrumentation function to gather measurement
and statistical values similar to counter groups.
Multiple values can be stored per item, which can be retrieved in
FIFO order. Getting values from the item does not modify its state to
allow for multiple independant backends (e.g. VTY and statd).
When a new value is set, the oldest value gets silently overwritten.
Lost values are skipped when getting values from the item.
Sponsored-by: On-Waves ehf
When using configure --disable-static, no libosmogsm.a will be
created, and the tests fail to link because symbols like _a5_3 and
_a5_4 are not exported through the only remaining libosmogsm.so.
A method to overcome this is an intermediate private non-distributed
library, examples of which are present in e.g. libabc, kmod and
systemd.
With this, disable-static can now be the default and practical compile
time be halved.
For some reason the structure is closer to be a LV (length
and value). The value is actually a tag but it is counted
inside the length. Introduce an overload of the parse function
to provide an offset for the length. This will be taken from
the returned length.
In file included from ../../include/osmocom/core/msgb.h:25:0,
from ../../tests/sms/sms_test.c:31:
../../include/osmocom/core/bits.h:6:35: fatal error: osmocom/core/bit16gen.h: No such file or directory
#include <osmocom/core/bit16gen.h>
The loggingrb (ringbuffer) test case was not actually being built or ran, instead still using the normal logging test.
This patch fixes the makefile, then the loggingrb testcase is changed to use the current loggingrb API so that it builds and passes.
Signed-off-by: Michael McTernan <mike.mcternan@wavemobile.com>
When the osmocore package is configured with --disable-static,
building of kasumi_test fails. This seems quite legit, given
the function _kasumi_kgcore is not exported.
Don't try to workaround the build system. Include the code.
CCLD kasumi/kasumi_test
kasumi_test.o: In function `test_expansion':
~tests/kasumi/kasumi_test.c:25: undefined reference to `_kasumi_key_expand'
kasumi_test.o: In function `main':
~tests/kasumi/kasumi_test.c:56: undefined reference to `_kasumi'
~tests/kasumi/kasumi_test.c💯 undefined reference to `_kasumi_key_expand'
~tests/kasumi/kasumi_test.c:112: undefined reference to `_kasumi_kgcore'
[...]
Philipp Maier
Max
Harald Welte
Neels Hofmeyr
Sylvain Munaut