This patch is a fixup or extension of commit
96d348efbf, which only fixed the default
values for "asp" VTY node, but not for the xua server's "listen" node.
As a result, without this patch, by default the SCTP server socket will
only listen on IPv4's "0.0.0.0", since NULL is resolved by getaddrinfo
to it instead of "::" as first candidate.
Fixes: 96d348efbf
Change-Id: Ifbc8df854d1f1e9b07b11911ad5da8cdf9f2080a
Previous commit changed the default bind/listen address of the server
from NULL (0.0.0.0) to 127.0.0.1, hence breaking some setups where no
"local-ip" was defined and hence from then on were only listening on
localhost by default.
Let's instead bind to "::" if IPv6 is available, which covers any IPv6
and/or IPv4 address. If not available, keep binding to 0.0.0.0.
Similarly, if IPv6 is available set default remote to both ::1 and
127.0.0.1 to allow it working against processes listening on IPv4 or
IPv6 addresses.
Change-Id: Id4718267df2390f70cec519042dc12bac0cd2876
This reverts commit 0b39f2cf7b.
Reason for revert:
Breaks ttcn test suites (at least for osmo-bsc) with osmo-stp error log:
"MTP-TRANSFER.req for DPC 187: no route!"
The breakage is fixed by only reverting the NULL -> "localhost" change
back to NULL. But the commit log indicated a reason for this, so rather
reverting the entire commit for now.
Change-Id: Ia97832f4e3ed646457d5c6eeba27352f1153edec
In osmo_ss7_vty_go_parent, "127.0.0.1" is changed to "localhost" to let
local NSS decide whether to use IPv4 or IPv6. In newish systems, IPv6
::1 will be selected since IPv6 takes precedence over IPv4.
Similarly, the default source addr needs to be changed from NULL to "localhost"
since for some yet unknwon reason, getaddrinfo(AF_UNSPEC, NULL) returns
first IPv4 "0.0.0.0" and later "::", which is inconsistent with
getaddrinfo("localhost") result, resulting in src=IPv4(0.0.0.0) and
dst=IPv6(::1), which is incompatible and will fail.
In any case, this change doesn't affect users of osmo_sccp_simple_client
because the APIs set both src and dst addresses.
Change-Id: I69c48819b70635c92fa404cafd917af7802d517c
Depends: libosmo-netif.git Change-Id Ie6bb17a9af6ca21d5e350f9c9d2d74c97c5a00af
As per RFC4666 it is optional whether or not a traffic-mode IE is
part of ASPAC requests from ASP to SG. We implemented that so far
by having none as default, unless the user specified an explicit
traffic-mode in the VTY. However, we had no command to remove that
explicit configuration and return to the implicit one.
Change-Id: Ibe2b298dd76dc4b02521dc411ae9d570eaf5a9a2
When 'cs7' was added, it was generally possible to get the full automatic
configuration spelled out by using 'show running-config'. Later, the vty was
modified so that automatically configured parts were omitted.
Since figuring out the 'cs7' configuration is far from trivial, it is very
convenient to get the program's current configuration spelled out in detail,
whether it is automatic or not. For this purpose, add a new 'show' command
which simply calls the ss7 VTY's write function with a new switch to disable
all omissions.
Change-Id: I84707561a6f54851c5599c39ea9bf1d971a2a1d7
we handle this correctly in not writing the actual "asp" configuration,
but we have a bug when writing the list of asps within one "as". Let's
make sure to skip the dynamically-created ASPs there, too.
Change-Id: I1a184f3ddec2e91ced8c95ada224da8b490407a8
Closes: OS#4284
The ASP role must be saved in lowercas as the parser during config file
reading only understands it in lowercase.
Change-Id: I38b8e4d73121f8bf001037fdd2dd164113544d94
Closes: OS#4270
The code to set the default role (SG) and default SCTP role (server)
must only be executed when the ASP node is first created. Subsequent
times entering the pre-existing ASP node should not overwrite
those role settings [or any other configuration for that matter]
Change-Id: I068996a5e0d870043b652fb69a3c300adc6fda7c
Closes: OS#4271
Similar to what we do with local address. Should fix creating the stream
when no remote address is provided on an ASP configured through VTY.
Related: OS#4260
Change-Id: I33672e76a51a5d5a483906749d30e4c4e08b66ce
The M3UA specification states that either of the two roles should
be the SCTP client and the other the server. It also states that
the default for the SGP is to operate as server. However, it permits
other configurations. Let's allow this to be configured by the VTY.
We need to ensure that while in ASP role, we don't send any NOTIFY
messages to the peer SG.
Change-Id: I7452a862d45da35dcd58654ca17222eb52d26f1f
Closes: OS#2005
So far, we had a static role model:
* SCTP servers (listening, such as OsmoSTP) are role SGW
* SCTP clients (connecting, such as OsmoMSC) are role ASP
While this is customary, it is not actually required by the
specification. The SGW can establish the SCTP connection to an ASP
but still remain "SG" role.
Let's make things more flexible by having the role configurable.
Related: OS#2005
Change-Id: I2df9cd9747ad5c9a05d567d9a71bab6184c53674
RFC 4666 (SS7/MTP3/M3UA) states in isection 4.3.4.3 ASP Active Procedures:
"""
If the traffic handling mode of the Application Server is not already known via
configuration data, then the traffic handling mode indicated in the
first ASP Active message causing the transition of the Application
Server state to AS-ACTIVE MAY be used to set the mode.
"""
In section 3.6.1 Registration Request (REG REQ), no related information
is provided on how to handle it, but still makes sense to apply same
behavior as in 4.3.4.3.
Related: OS#4220
Change-Id: Iaebe3a93ad8d2d84ae01e41b02674f8ece9dfc95
Several parts of the code expect an operative ASP to always have at
least one local ip addr, be it INET_ANY (NULL, 0.0.0.0) or any specific
IP address.
This allows osmo_ss7_asp_find_by_socket_addr() matching incoming
connectiongs against ASPs defined through VTY "asp" node with no
"local-ip" cmd option specified. In that case, we assume the user wants
it to bind/match against INET_ANY.
Related: OS#3608
Fixes: 80b1355819
Change-Id: Id4da0c778890c90cf5bfcf0fd3a7ecf165f2a6df
After this patch, Several "local-ip" and "remote-ip" lines are accepted
under "listen" and "asp" VTY nodes, allowing to configure an SCTP
connection with multiple connections, hence allowing control of SCTP
multi-homing features.
libosmo-sccp clients such as osmo-bsc and osmo-msc also gain support for
this feature with this commit.
Related: OS#3608
Depends: libosmocore.git Ic8681d9e093216c99c6bca4be81c31ef83688ed1
Depends: libosmo-netif.git I0fe62f518e195db4e34f3b0ad1762bb57ba9d92a
Change-Id: Ibd15de7a4e00dbec78ff2e2dd6a686b0f3af22de
Commit 10d4815bb1 already fixed the issue
where binding was done during L_CS7_XUA_NODE (listen) done, meaning
local-ip inside it had no effect. In that comment, binding was moved to
happen during "local-ip" VTY cmd. Furthermore, that commit added a new
osmo_ss7_bind_all_instances() and related APIs to allow osmo-stp to have
all xua servers bound if no "local-ip" was provided.
These APIs have only been used so far by osmo-stp (which lays in the
same git repo that libosmo-sccp) since it's the only program using the
xua server features.
In the present commit, let's drop the APIs added by commit described
above, and instead let libosmo-sccp code to internally bind the xua
server upon exit of the VTY node. As a result, the previously introduced
APIs can be dropped (not used by anyone anymore) and it will provide
ways to support multiple "local-ip" commands in the future, hence
supporting SCTP multi-home features.
It's recommended to require libosmocore.git Ia6d88c0e63d94ba99e950da6efbc4c1871070012
since it fixes a bug where go_parent_cb was not called for nodes at the
end of the file.
Related: OS#3608
Change-Id: I2cff17b5e2e2fbfd4591e23a416e510e94e173d6
The IPA protocol doesn't have the context of routing-keys. We are only
permitting routing key '0' (as the default routing key) when configuring
via VTY.
Change-Id: I3f166f44903d0b93963cc5d0cca73d277d2b7215
Fixes: OS#4234, OS#4233
When receiving SCCP messages from an IPA peer/ASP, osmo-stp so far
unconditionally inserted origin/destination point codes int the SCCP
called / calling party addresses.
This behaviro is now made optional with the introduction of the
following per-AS configuration:
"point-code override patch-sccp (disabled|both)"
The default behavior is switched from 'both' to 'disabled' at the same
time.
Change-Id: I535e2170adadfe755d2bcbf5bbf4556bebb77737
Closes: OS#4219
We were printing the mask of the route, but not the point code itself.
Best would probably be to print both?
Closes: OS#3835
Change-Id: Ifa4fdbad953d40f222beb470a082eed8c20991ef
As osmo_ss7_route_print() returns a static buffer, we cannot use it
twice within a single log/print statement. Rather, we must use
osmo_ss7_route_print2() for the second call, as it uses a separate
static buffer.
Change-Id: Ica32e83cbe8af2317cb07f8d8422a399fa537012
When saving the current VTY config to a configuration file,
do not write out AS/ASP configuration items which are generated
as a fallback by osmo_sccp_simple_client_on_ss7_id().
Since the user did not explicitly configure these configuration
items they should not be saved to the user's configuration file.
Change-Id: Id8a3afc6dee29ae1ee9c862cbe404a61fe979dba
Related: OS#3616
The previous hardcoded SCCP timers may cause SCCP connection releases, if the
peer is configured with far lower timers than libosmo-sccp. Testing with a
specific SCCPlite MSC, I experienced an iar of just over three minutes, meaning
that calls would be cut off by the MSC, since the osmo-bsc failed to send an
Inactivity Timer message until seven minutes have passed.
With this patch, SCCP timers are configurable by the user.
Define constant global default timers, and variable user-configurable timers
with each osmo_sccp_instance.
Add VTY UI to configure the timers. Users must call osmo_sccp_vty_init() to get
the sccp-timer config nodes under the 'cs7' node. Show the new UI in
ss7_asp_test.vty.
Note that even though this function is not new at all, until recently, all of
our SCCP users (osmo-bsc, osmo-msc, osmo-sgsn, osmo-hnbgw) failed to call
osmo_sccp_vty_init(), and thus also missed out on the various 'show' commands
defined in sccp_vty.c. In other words, to benefit from the timer
configurability, the patches to call osmo_sccp_vty_init() must first be merged
to the corresponding master branches.
If a 'sccp-timer' config command occurs, the cs7 instance must allocate an SCCP
instance in order to store the timer config. Do that by calling the recently
added osmo_ss7_ensure_sccp() function.
Hence remove the limitation that the SCCP instance must not be populated from
the "simple" setup function. If we want to configure SCCP timers beforehand,
there must be an SCCP instance for that, and there is no hard reason to require
a NULL SCCP instance, besides the desire to prevent this function from being
invoked twice.
Change-Id: I28a7362aa838e648ecc9b26ee53dbcade81a9d65
The 'show cs7 instance 0 sccp-addressbook' command should not be inside the
'cs7' node. That defies the point of naming the instance again, and it falls
out of place of all the other 'show cs7' commands on the VIEW and ENABLE nodes.
Drop the old command within the 'cs7' node without substitution or deprecation.
At the same time, drop dash from 'show cs7 i 0 sccp-addressbook'
There are various other show cs7 commands already defined in sccp_vty.c, which
have 'sccp' as a separate string. Conform to that.
Change-Id: I80e0bc0a91bcd3fb75372045db34592d2d663d41
Fix typo "to long".
Say 'cs7 instance' instead of 'ss7 instance': we are interacting with a user on
the telnet VTY, and that user is configuring a 'cs7 instance'. Especially a
lowercase 'ss7' is potentially confusing ("is there an 'ss7' node?").
Changes show in ss7_asp_test.vty.
Change-Id: Iebb976531576268d58338895a4baadbca6137b80
Allowing a whole line of characters as address book name would be a lot,
allowing 512 characters is completely ridiculous. That's more than this entire
commit log message! 32 is plenty.
All linking programs should automatically get the limitation in their VTY
parsing without any changes.
Configs with sccp-addr names > 31 chars will no longer work after this.
Change-Id: I3ecf83d620e46f7bf9857fc60a93d4e240ee3b8a
When entering an 'cs7' / 'asp' node, and invoking 'do show cs7 i 0 asp', the
ASP's FSM instance is not yet allocated. Hence attempting to print its status
will result in a segfault.
Spotted this while writing VTY tests that will follow shortly in another patch
(I6a28684fa24d6e7de568623444297028eba2ab8c).
Change-Id: I3ebf498492c6ba69a5dd1c9f36acdabfd6fbdfe1
In osmo-stp, cmd "local-ip" inside node "listen m3ua 2905" was actually
not being applied, because the server was created + bound at "listen" command
time using NULL as IP, and at "local-ip" time the IP was changed but the
server was not re-bound using the new IP, so it kept listening at
0.0.0.0.
With this patch, we defer binding the socket to "local-ip" cmd time,
after the IP has been applied.
As a result, if no "local-ip" command is provided, then the bind never
happens, which means it is now mandatory that users of osmo_ss7_xua_server_create
API not using osmo_ss7_xua_server_set_local_host call new provided API
osmo_ss7_xua_server_bind. Another new API osmo_ss7_bind_all_instances is
provided to easily make sure all servers are bound after configuration
process. This is specially important for servers which doesn't contain
the "local-ip" parameter.
Users of osmo_sccp_simple_server API are not affected by this change,
and they not requrie to call any new API.
Furthermore, using osmo_ss7_xua_server_bind in VTY code ensures the xUA
server is automatically bound to the new address if the operator changes
the "local-ip" cmd at runtime.
Related: OS#2647
Change-Id: I79738963d633bec70705ff159c5b2127cd498aa2
So far, the config would log an error upon config parsing, and then continue to
use defaults, which is super easy to miss. On errors, return CMD_ERR_INCOMPLETE
to abort the program in a config parsing error.
Be fatal for re-using an already defined addressbook entry in another cs7
instance, and for having a too long addressbook entry name.
Though it is mixing in cosmetic changes, add "Error:" to the output and arrange
the erratic name to the end of the message, as is customary for error messages.
Related: osmo-bsc Ia4e58902a2d3757b266cf35ac89f256cfb8f0eec
Change-Id: I2f71b9c4dd30f919d2054da81283dd7035f44f60
vty_install_default() and install_default() will soon be deprecated.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: I185aa3a11cb63c893ed80f326f852bde95217321
We can set the ASP's remote IP (i.e. where to reach osmo-stp), but so far the
only way to specify the local IP address to bind to can only be set from C code
(e.g. the simple client). Allow setting the local address via VTY.
For example, this is desired for the osmo-gsm-tester, to not use arbitrary IP
addresses.
Change-Id: I3f71897dfacafcf3126e51894d6ca756b02dcd7d
The VTY definition for this command is flawed and breaks osmo-msc VTY tests.
The small problem is a stray '}' in the definition, the bigger problem is that
square brackets indicating optional arguments must not enclose more than one
argument.
Split up the command in several separate definitions with si arg, with ssn arg,
with both, and with neither.
If si and/or ssn are not passed, set them to zero.
See https://lists.osmocom.org/pipermail/openbsc/2017-August/011026.html
"optional vty items are stricter than expected"
Change-Id: Idc68bfae5457960a9eae5d9648586d6ce719ad68
A doc element is missing, which fails the VTY tests in osmo-msc at Change-Id
I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77.
Change-Id: I16aa74244ed5332bdc1fddd538e17b86f62ec3b2
The asp->cfg.remote.host is allowed to be NULL in cases where the
localhost is used.
Check if asp->cfg.remote.host is NULL when writing the config file
and omit it when it is set to NULL.
Change-Id: I18f79cc4d4f1db8f2858e8e95098c5821d50594f
The SG (signal gateway) requires an extra set of VTY commands in
order to be fully configurable. These VTY commands do not make
sense in a situation where libosmo-sccp is used to implement an
ASP (application server process).
Detect in which role libosmo-sccp is used by which of the VTY
initalization functions are called:
osmo_ss7_vty_init_asp() ==> ASP
osmo_ss7_vty_init_sg() ==> SG
Prevent writing back of SG specific configuration when in
running as ASP. Only write back the full parameter set when
running as SG.
Change-Id: I707bcd790f4c6d0f618e41163b51d2179ea3aeaf
Pau Espin
Neels Hofmeyr
Harald Welte
Neels Hofmeyr
Philipp Maier