let's avoid messages like
DLSS7 <000c> xua_asp_fsm.c:600 XUA_ASP(asp-client0){ASP_DOWN}: transition to state ASP_DOWN not permitted!
Change-Id: Iabbcf92e3022a4c3f165ce19be929915f92b455c
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I344c49001fba23bdcfdef06ab174c52b60edd01c
If we are running in ASP (client) role, and we are about to transmit an
ASPAC or ASPIA to the SG, we must make sure to include any applicable
routing contexts.
Change-Id: Iee4f0d553d6845a9ae08cb5e4f57fdec443e4ef9
Related: OS#4285
When a client (ASP) sends an ASPAC to the server (SG), it should include
the traffic-mode configured for it's ASs, if any.
Change-Id: Ia850df22df529dab74959e8666f85976002c482c
Related: OS#4285
we handle this correctly in not writing the actual "asp" configuration,
but we have a bug when writing the list of asps within one "as". Let's
make sure to skip the dynamically-created ASPs there, too.
Change-Id: I1a184f3ddec2e91ced8c95ada224da8b490407a8
Closes: OS#4284
The ASP role must be saved in lowercas as the parser during config file
reading only understands it in lowercase.
Change-Id: I38b8e4d73121f8bf001037fdd2dd164113544d94
Closes: OS#4270
The code to set the default role (SG) and default SCTP role (server)
must only be executed when the ASP node is first created. Subsequent
times entering the pre-existing ASP node should not overwrite
those role settings [or any other configuration for that matter]
Change-Id: I068996a5e0d870043b652fb69a3c300adc6fda7c
Closes: OS#4271
This is like osmo_ss7_asp_find_and_create(), i.e. it's doing a full
match for an ASP within the specified SS7 instance, of the specified
port numbers. It just doesn't create it if it is missing.
Change-Id: I1ed3cf2b69ee622d6f9d8b50487f392fe913ae90
Related: OS#4271
In general we want to avoid multiline log messages since they make
parsing more difficult. Also output in VTY over telnet looks strange
(indentation incremented at each new line).
Change-Id: Id9084d0e0f976bb374186db93d6ff8062b99e238
Since it may act sometimes as a server and sometimes as a client, let's
better use one more neutral (2-side arrow) connector, and mark which
address is the local and which is the remote. We already use same
formatting in other osmocom code.
Change-Id: I42feaa16790f02b98bcda65281de8cd9295ddcb6
Since there's no official spec for IPA and some
implementations seem to like sending the IPA ID ACK before
the IPA ID RESP, let's catch it and feed it after we receive
the IPA ID RESP and we are in correct state. Otherwise the connection
would deadlock during the initial handshake.
That's the case with our TTCN3 IPA implementation running STP_Tests
suite.
Change-Id: I99f5346a3854ca07979020245897334197f3cd3b
If AS is configured with Traffic Mode Override, then if a new ASP
becomes active, all previous ASPs are considered to be inactive and new
data is sent to the newly activated ASP.
Remark: It's still unclear which methodology/implementation will follow
when the last activated ASP becomes inactive/shutdown. Then probably
another one should be activated at that time, but that logic is not
there implemented as far as I know.
Change-Id: I4ff246b2f899aaa3cf63bbdb3f3d317dc89b3d15
Similar to what we do with local address. Should fix creating the stream
when no remote address is provided on an ASP configured through VTY.
Related: OS#4260
Change-Id: I33672e76a51a5d5a483906749d30e4c4e08b66ce
This change suspends the warnings about option 'subdir-objects',
by using the existing object file from the build directory.
Change-Id: I4dc2abb19c58fce0a12cc9799019878194c667d1
RFC4666 sec 4.3.4.3. ASP Active Procedures:
"""
In the case of an Override mode AS, receipt of an ASP Active message
at an SGP causes the (re)direction of all traffic for the AS to the
ASP that sent the ASP Active message. Any previously active ASP in
the AS is now considered to be in the state ASP-INACTIVE and SHOULD
no longer receive traffic from the SGP within the AS. The SGP or
IPSP then MUST send a Notify message ("Alternate ASP_Active") to the
previously active ASP in the AS and SHOULD stop traffic to/from that
ASP. The ASP receiving this Notify MUST consider itself now in the
ASP-INACTIVE state, if it is not already aware of this via inter-ASP
communication with the Overriding ASP.
"""
Change-Id: I474f5cc1f6cbab72d010d1f8ac7ed2285e4c1c45
Most likely, we want all dynamically allocated ASPs to play the SG
role by default. Otherwise when using the following configuration:
cs7 instance 0
xua rkm routing-key-allocation dynamic-permitted
listen m3ua 2905
accept-asp-connections dynamic-permitted
both OsmoMSC and OsmoBSC fail to establish connections.
Change-Id: Ib904ecf0e5d192a1024863f6f0fdf79301055655
Fixes: I2df9cd9747ad5c9a05d567d9a71bab6184c53674
Related: OS#4247
This way the AS can be configured to use different traffic modes over
time as long as they don't overlap in time. That is in this case where
no specific traffic mode is specified in AS local configuration (VTY).
Some RFC4666 state similar behvor of deleting data set by ASPs during AS
shutdown. For instance:
"""
Other ASPs may continue to be associated with the Application Server,
in which case the Routing Key data SHOULD NOT be deleted. If a
Deregistration results in no more ASPs in an Application Server, an
SG MAY delete the Routing Key data.
"""
This allows for tests to easily re-use same AS to test different traffic
modes as long as they wait for the recovery timeout (2 secs by default,
configurable via VTY).
Related: OS#4220
Change-Id: I370aa3b5ddfc456c1be5b2585f2f470d5aa8d289
The M3UA specification states that either of the two roles should
be the SCTP client and the other the server. It also states that
the default for the SGP is to operate as server. However, it permits
other configurations. Let's allow this to be configured by the VTY.
We need to ensure that while in ASP role, we don't send any NOTIFY
messages to the peer SG.
Change-Id: I7452a862d45da35dcd58654ca17222eb52d26f1f
Closes: OS#2005
So far, we had a static role model:
* SCTP servers (listening, such as OsmoSTP) are role SGW
* SCTP clients (connecting, such as OsmoMSC) are role ASP
While this is customary, it is not actually required by the
specification. The SGW can establish the SCTP connection to an ASP
but still remain "SG" role.
Let's make things more flexible by having the role configurable.
Related: OS#2005
Change-Id: I2df9cd9747ad5c9a05d567d9a71bab6184c53674
If the AS is e.g. configured as broadcast, then individual ASPs cannot
be activated in loadshare or override. Everyone must agree.
Change-Id: Ic73410fbc88d50710202453f759fa132ce14db4c
IF we cannot activate the ASP in response to an ASPAC, we should
return just the error and not an error + ASPACK_ACK.
Change-Id: I681021a13af9b91d8b2b849bd7149d6b1f783865
RFC 4666 (SS7/MTP3/M3UA) states in isection 4.3.4.3 ASP Active Procedures:
"""
If the traffic handling mode of the Application Server is not already known via
configuration data, then the traffic handling mode indicated in the
first ASP Active message causing the transition of the Application
Server state to AS-ACTIVE MAY be used to set the mode.
"""
In section 3.6.1 Registration Request (REG REQ), no related information
is provided on how to handle it, but still makes sense to apply same
behavior as in 4.3.4.3.
Related: OS#4220
Change-Id: Iaebe3a93ad8d2d84ae01e41b02674f8ece9dfc95
Otherwise default OSMO_SS7_AS_TMOD_OVERRIDE=0 value is always set
regardless of the VTY config "traffic-mode" under AS node.
Related: OS#4220
Change-Id: I5d24772f07e77cc3ba6edfa819bb9bc0266a1064
This function is used for both actual SIGTRAN (M3UA, SUA over SCTP)
as well as for IPA/SCCPLITE (over TCP). Having a static "SCTP"
string in the log lines is confusing.
Change-Id: Ic34ddbcd528cd871d9772665e1d0863896f33203
Several parts of the code expect an operative ASP to always have at
least one local ip addr, be it INET_ANY (NULL, 0.0.0.0) or any specific
IP address.
This allows osmo_ss7_asp_find_by_socket_addr() matching incoming
connectiongs against ASPs defined through VTY "asp" node with no
"local-ip" cmd option specified. In that case, we assume the user wants
it to bind/match against INET_ANY.
Related: OS#3608
Fixes: 80b1355819
Change-Id: Id4da0c778890c90cf5bfcf0fd3a7ecf165f2a6df