Use the new macros to deal with little/big endian. Im a bit
worried to make this change due the little test coverage in
this module but in case of a typo the elements would not be
defined.
Make sure we don't release a osmux handle with an armed batch timer.
==9753== Invalid read of size 4
==9753== at 0x4043CA2: rb_first (rbtree.c:293)
==9753== by 0x403E172: osmo_timers_check (timer.c:256)
==9753== by 0x403E69E: osmo_select_main (select.c:124)
==9753== by 0x804EBD3: main (bsc_nat.c:1613)
==9753== Address 0x4302670 is 56 bytes inside a block of size 108 free'd
==9753== at 0x4023B6A: free (vg_replace_malloc.c:366)
==9753== by 0x40494CF: talloc_free (talloc.c:609)
==9753== by 0x40AB279: osmux_xfrm_input_fini (osmux.c:620)
==9753== by 0x80651FC: osmux_disable_endpoint (mgcp_osmux.c:96)
==9753== by 0x805CAFF: mgcp_release_endp (mgcp_protocol.c:1540)
==9753== by 0x805DD35: handle_delete_con (mgcp_protocol.c:1274)
==9753== by 0x805E998: mgcp_handle_message (mgcp_protocol.c:415)
==9753== by 0x804CFF1: mgcp_do_read (bsc_mgcp_utils.c:972)
==9753== by 0x403F96D: osmo_wqueue_bfd_cb (write_queue.c:48)
==9753== by 0x403E724: osmo_select_main (select.c:158)
==9753== by 0x804EBD3: main (bsc_nat.c:1613)
If it is not possible to put the RTP message into the batch in case that:
1) The message is malformed.
2) The message is duplicated.
3) OOM.
4) The batch is already full.
Osmux releases the messages and gets back to the upper layer with an OK
to give another chance to follow up RTP messages.
This patch also fixes a use-after-free that was possible when the batch
was full. The message was released and osmux_batch_add() was returning 0
osmux_xfrm_input(), which resulted in accessing the released message
when updating the statistics.
This is ugly, with many ifdefs, but they don't want any debug message
that can be spamming. I don't want to remove these because there is
no dissector for osmux, and this can be useful for troubleshooting.
Should be enabled only in case you consider that Osmux should
is lagging when reconstructing RTP messages. I haven't seen
any issue regarding this so far. Let's disable it by default.
This patch adds a new field to the struct osmux_in_handle that allows
you to specify the osmux frame size. If not specified, the default
size assumes your nic uses a mtu of 1500 bytes.
Remove message that is printed twice and reword the messages to
make it more clear the traffic flow when compressing and
decompressing the RTP AMR traffic.
(dc898ab osmux: don't trust AMR FT field) was not correctly
validating the AMR FT field as it was comparing the same
value twice calculated in different ways.
Use osmo_amr_bytes(amrh->ft) to obtain the expected length
and check if it is what we got. Use the output of
osmo_rtp_get_payload() as it also includes the RTP payload
stripping possible extensions.
The ctr field of the osmux header is 3 bits long, make sure we
don't run over that boundary. This should not happen in practise
unless we have to deal with network congestion or broken RTP
stacks, but osmux should not crash in that case.
With this patch, osmux_xfrm_input() returns 0 (means "message has been
processed") instead of 1 (means "retry") if the RTP message is too big
to fit into one osmux batch. This fixes a likely infinite loop in the
caller, which will retry forever for a message does not fit into the
batch.
Unlikely to happen in normal scenario, as RTP+AMR messages are way
smaller than the interface MTU.
The AMR FT field is used to infer the length of the payload, if
a value higher than 8 (SID) is received, skip it.
This fixes a possible crash in osmux_snprintf() in case we receive
a malformed osmux header.
This is also addresses the crash described in c733ae5b6e.
valgrind reports the following crash backtrace:
!<001c> osmux.c:687 No room for OSMUX payload: only 49 bytes
==12800==
==12800== Process terminating with default action of signal 11 (SIGSEGV)
==12800== Access not within mapped region at address 0xDFA8E473
==12800== at 0x4073FD2: osmux_snprintf (osmux.c:628)
==12800== by 0x80524F1: osmux_deliver (osmux.c:50)
==12800== by 0x407371C: osmux_xfrm_input_deliver (osmux.c:302)
==12800== by 0x4073792: osmux_batch_timer_expired (osmux.c:312)
==12800== by 0x405A4A0: osmo_timers_update (timer.c:243)
==12800== by 0x405A79A: osmo_select_main (select.c:133)
==12800== by 0x8049A53: main (mgcp_main.c:307)
The problem is that osmux_snprintf() is not handling multi-batch
messages (ie. messages that contain several osmux batches). More
specifically, the offset to print the osmux batches was reset
when parsing every osmux batch.
The problem also manifested with wrong outputs.
Reported by Mattias Lundstrom.
Valgrind complains about a possible use after free:
==12800== Invalid read of size 4
==12800== at 0x4073DF6: osmux_tx_sched (linuxlist.h:119)
==12800== by 0x8052B0F: osmux_read_from_bsc_nat_cb (osmux.c:261)
==12800== by 0x453F967: ???
==12800== Address 0x453f710 is 48 bytes inside a block of size 145
+free'd
==12800== at 0x402750C: free (vg_replace_malloc.c:427)
==12800== by 0x4064ADE: talloc_free (talloc.c:609)
==12800== by 0x405AAAA: msgb_free (msgb.c:72)
==12800== by 0x8052492: scheduled_tx_bts_cb (osmux.c:196)
==12800== by 0x4072CF8: osmux_tx_cb (osmux.c:554)
==12800== by 0x4073F03: osmux_tx_sched (osmux.c:582)
==12800== by 0x8052B0F: osmux_read_from_bsc_nat_cb (osmux.c:261)
==12800== by 0x453F967: ???
The problem is that osmux_tx_sched may immediately call osmux_tx_cb for
the first extracted RTP message from the osmux batch, which releases the
message after that.
Remove the message from our list of messages to be transmitted before
the message is passed to the tx callback.
Reported by Mattias Lundstrom.
According to RFC3267, AMR FT upper 9 should be discarded. This patch
adds extra validation to make sure that input RTP traffic encapsulating
AMR payload and OSMUX amr_ft field are OK with regards to that
restriction.
rtp.c:154:26: warning: The left operand to '/' is always 0
frame_diff = (usec_diff / 20000);
~~~~~~~~~ ^
rtp.c:157:43: warning: The left operand to '-' is always 0
long int frame_diff_excess = frame_diff - 1;
~~~~~~~~~~ ^
rtp.c:153:39: warning: The right operand to '+' is always 0
usec_diff = tv_diff.tv_sec * 1000000 + tv_diff.tv_usec;
^ ~~~~~~~~~~~~~~~
rtp.c:153:29: warning: The left operand to '*' is always 0
usec_diff = tv_diff.tv_sec * 1000000 + tv_diff.tv_usec;
~~~~~~~~~~~~~~ ^
4 warnings generated.
Reported by Holger Hans Peter Freyther.
osmux.c:622:20: warning: Value stored to 'osmuxh' during its
initialization is never read
struct osmux_hdr *osmuxh = (struct osmux_hdr *)msg->data;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported by Holger Hans Peter Freyther.
If osmux notices a gap between two RTP packets, fill it with
the last RTP packet seen. Without this patch, 10% of packet loss
is enough to get garbage, with it we get glitches in the conversation
with 30%, and pretty much broken conversation with 40% of it.
Holger Hans Peter Freyther
Martin Hauke