Previously recv() returning 0 for UDP socket was considered as error
although it's legitimate return value for empty UDP packets. Relax the
error check to avoid confusing error messages.
The function behavior is the same:
* msg is not altered while receiving 0-length UDP packet
* return value is 0
The only result of the relaxed error check is the absense of error log
message for 0-length UDP packet.
Change-Id: I32e5fcbf5ed92cc923660ac59e6a37fd3f0703a7
Fixes: OS#2219
There's no need for the rs232 code to include a files from
libosmoabis. The only users of libosmoabis left now are the LAPD
examples:
examples/lapd-over-datagram-network.c
examples/lapd-over-datagram-user.c
Change-Id: Ie1bc0dd811362cec546486edc41d632740ed19cd
This patch inconditionally initializes the buffer we get to
nul-terminate it, whenever possible. It's a very simple solution to
catch three overly corner cases:
1) snprintf() returns -1, very much unlikely in practise.
2) msg->len == 0: In such case, I would expect this function is never
called with an empty message, but let's be safe in this case too.
3) If your buffer is empty, it doesn't nul-terminate the buffer.
Change-Id: I97e517f2d98e83894ea707c63489559302ff6bd2
SNPRINTF_BUFFER_SIZE() looks too complex, previous version maintains two
different variables to account for the remaining space in the buffer,
one of them is always decremented based on what snprintf() returns,
which may result in underflow. These variables are swapped - not used
consistently - all over this code.
Replace this macro by a simplified version, with one single parameter to
account for remaining space. This macro also deals with two corner
cases:
1) snprintf() fails, actually never happens in practise, but
documentation indicates it may return -1, so let's catch this case
from here to stick to specs.
2) There is not enough space in the buffer, in that case, keep
increasing offset, so we know how much would have been printed, just
like snprintf() does.
Thanks to Pau Espin for reporting, and Holger for clues on this.
I have run osmux_test and, at quick glance, it looks good.
Change-Id: I5b5d6ec57a02f57c23b1ae86dbd894bad28ea797
The buffer for osmux_test is increased as the former doesn't seem to be
able to cope with the whole output.
Change-Id: Ic838dd9d7ad89b4510ccfa58c0390c69a075b616
We didn't check for cases where setsockopt_nodelay() fails. Let's check
for that and bail out + close the socket.
Change-Id: I0adbc4cec35be7c36bdf01d4d8fefd6097e9be5d
Fixes: coverity CID#166970
We couldn't figure out what "crx" as supposed to mean and assume
it is a typo. Fix the code and call it ctx, this is fixing the
API documentation as well.
Change-Id: I27ed1178fdbbcf3fc0e1070dc19b4ecf9a327a04
According to RFC4867 (RTP payload format for AMR):
"The RTP header marker bit (M) SHALL be set to 1 if the first frameblock
carried in the packet contains a speech frame which is the first in a
talkspurt. For all other packets the marker bit SHALL be set to zero (M=0)."
This information bit provides a way for the receiver to better
synchronize the delay with ther sender.
This is specially useful if AMR DTX features are supported and
enabled on the sender.
Change-Id: I0315658159429603f1d80a168718b026015060e9
This commit should fix a bug present if for instance batch_factor < 8
and osmux_batch_enqueue is called from osmux_replay_lost_packets and
enough packets were lost from last received packet.
Change-Id: I5d643810949aeca4762f0cad05eed534d35087f7
Enabling sender_dry_event in SCTP_FLAGS breaks reliable delivery of DATA
chunks to the scoket user on Linux. Let's avoid enabling that, while
still enabling various other interesting events.
See https://bugzilla.redhat.com/show_bug.cgi?id=1442784 for all related
details.
Change-Id: Ib616cd07a6044ca2ee7e05093b22df3369c62b56
We were using the wrong variable when setting the SCTP_NODELAY,
resulting in the setsoctkopt() fialing.
Change-Id: Ic04cb8bb5ff41f177f7f5b7f7e2a2ecc686dd4c0
So far we seem to assume that the accept_cb does all handling of socket
fd cleanup. However, there are cases where there is no accept_cb set,
the accept_cb returns error, or an earlier sctp_sock_activate_events()
or the activation of non-blocking mode fails.
For those cases, close the socket and return an error code.
Fixes: CID#57915
Change-Id: I3a3ce9194ab7ca5c1921fc79c2a1c9e10a552cf0
In a659590e29 we fixed endianness issues
with the Stream ID field, but at the same time mistook the PPID field
for 16bits. In reality it is 32bits, and hence our 'htons' is rendering
wrong PPID values.
Change-Id: I1b60523044835ee630dba9a43d26af4f1ebd1ced
Using this function, the user can configure if sockets related to the
respective stream client or server should have the NODELAY socket
option set in order to avoid Nagle algorithm or related algorithms
that may introduce packet delay on the transmitter side.
Change-Id: Ibeb9ba227bab18f7f4f16518c0022c4f003cc8e9
In their infinite wisdom, the inventors of SCTP designed an API (the
sockets API described in RFC6458), where some members are in host byte
order (like the stream identifier), while other members are in network
byte order (like the PPID).
Let's handle this properly (we assumed both are network byte order), and
also use 16-bit htons/ntohs fo the PPID, rather than htonl/ntohl.
Change-Id: I777174ca2915c6de0063db41a745c71b4a09bbec
* when using osmo_*_destroy(), always call *_close() internally to
make sure we don't free memory holding references to sockets that are
still open
* when closing the socket, always make sure to set the fd to -1 in all
cases, to avoid attempts to avoid later close() on a new file using
the same fd number as the socket closed previously.
Change-Id: I29c37da6e8f5be8ab030e68952a8f92add146821
during osmo_*_set_addr(), we must make sure to talloc_free() any old
address before copying in the new address. Not all functions did this,
and those that did implemented it manually. Let's use
osmo_talloc_replace_string() which is exactly intended for this case.
Change-Id: Ie1b140a160c66e8b62c745174865d5ba525cb2c2
This uses the new osmo_sock_init2() features introduced in libosmocore
Change-Id Idab124bcca47872f55311a82d6818aed590965e6 to bind *and*
connect a given socket during creation.
Change-Id: I013f4cc10b26d332d52d231f252bb0f03df8c54b
We should have doxygen documentation for all libosmo-* APIs.
libosmo-netif is currently devoid of any API docs. Let's start with the
stream and datagram socket related functions.
Change-Id: I589a5e60d9df2b8a65fbaf68f80e3ae0039d8c2a
without setting the BSC_FD_* flags prior to reconnection, the re-connect
would happen silently and the client program would not be notified via the
connect_cb().
Change-Id: Iaf8ec8662cf83476eee1b76fa41dc57f063f0ad3
In case the application is using the read-callback and a read returns 0,
then the application itself would want to trigger the reconnect. This
is different from the osmo_stream_cli_recv() case where the reconnect
can be handled internally to the library.
Change-Id: I41314bad4a9f44e8a61b9d2ba33d1a76b25bd145
if osmo_stream_cli_destroy() is called while the reconnect timer is
running, we would end up in a crash.
Change-Id: If6597130f472f1e2b8d9682002250ecd54675bb0
We use the magic value '-1' in case the file descriptor is not yet
initialized. If somebody calls osmo_stream_*_close() before this
changes, we used to crash. Let's check for this and avoid a crash.
Also, after close let's change the fd to -1 again to mark the fd
invalidity.
Change-Id: I3aa04999ab01cb7971ee2dad45dfc31ab4142868
The reconnect behavior was likely broken in commit
de3f57a8293a5b39435d6f283da23e0172bad8bb
If the user requests a re-connect, we should start it. Not only in case
the connection drops later, but also if the initial connection itself
fails.
Change-Id: I817e026404cbd9145cae2ce90bc57a1db1d2e12b
osmo_sock_init() never returns -1 + errno EINPROGRESS. It will return a
positive fd in case the connect operation is in progress. Therefore,
the related code in osmo_stream_cli_open2() was impossible to execute.
Change-Id: Id3483d1d1d4d2eabba94729ea29e5c93b33abff0
Fixes: Coverity CID 57861
When the setsockopt() in sctp_sock_activate_events() indicates an error,
let's print an error message in the log about this.
Change-Id: I5920154e23debe6d01eaa156005db0842f1a18cc
Fixes: Coverity CID 57634
Use this function in osmux_batch_del_circuit() since msgs are stored in a list
per circuit. After the circuit is free()d the msgs are lost.
Before this patch any messages enqueued inside a batch when the circiut is
deleted were leaking.
Change-Id: Ib0311652183332d0475bf7347023d518d38487ef
Ticket: OS#1733
Reviewed-on: https://gerrit.osmocom.org/120
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
caught by valgrind:
==3150== Syscall param sendmsg(msg.msg_control) points to uninitialised byte(s)
==3150== at 0x60DC0D0: __sendmsg_nocancel (syscall-template.S:81)
==3150== by 0x5DF3413: sctp_send (in /usr/lib/x86_64-linux-gnu/libsctp.so.1.0.16)
==3150== by 0x65AA066: osmo_stream_srv_write (stream.c:540)
So far, when the first connection attempt failed in
osmo_stream_cli_open(), we returned a terminal errro without any
re-connection attempts. While this may be useful in some cases, our
general idea of the stream client logic is to handle the reconnection
attempts insid the library. We introduce a new osmo_stream_cli_open2()
function while keping the old behavior for backwards compatibility.
Wih this change, osmo_stream_ client and server API can be used not only
for TCP but also for SCTP. The latter is needed in SIGTRAN ad Iuh
applications, for example.