This feature is used to indicate to the BSC that the BTS supports Osmux.
Requires: libosmocore 18c6a8183f92915e77368ecffb1cbf7f555453a3
Related: SYS#5987
Change-Id: Ia402b7514b636750442d0859d5ebc3fcad67dd9f
These files are in .gitignore and get generated at the end of running
'make'. Remove them to have less cluttered 'git grep' output.
Change-Id: Ie5bf05220359ac0941f62cc86ed843363548784a
This is another fixup for [1]. I didn't notice that the sccplite
variant of ttcn3-bsc-test has its own copy of jenkins.sh.
Change-Id: I21219724adbeda4166963b4940b08aad281a62cb
Fixes: [1] Iba4fbd5c9ed59783df4ac64e68b2beef73a812ff
Related: SYS#5460
This should have been done as part of [1] in order to avoid
regressions in ttcn3-bsc-test-sccplite.
Change-Id: I2d0045533814a2bacc384c06287066f2209a5f38
Fixes: [1] Iba4fbd5c9ed59783df4ac64e68b2beef73a812ff
Related: SYS#5460
Add arguments to osmo-bts-omldummy to properly report the features that
were previously assumed for osmo-bts even without reporting them, until
this was changed in osmo-bsc I7fca42a39a4bc98a6ea8b9cfab28c4bad3a6a0aa.
Related: SYS#5922, OS#5538
Change-Id: Ib22f25431330676d59900de7bfb3d89e7872baf1
Allocating a pseudo-TTY (-t, --tty) fails when 'run' is executed
inside of a Jenkins or cron script. This change fixes
ttcn3-bts-test, which invokes 'run' to fetch the config files.
Change-Id: If22f682be4f004c5bb43e65098079a4f4fe6158d
Fixes: If15461240f3037c142c176fc7da745a1701ae3f8
This enables the test suite to obtain talloc reports between the
test case executions, which get stored together with the PCAP files.
Change-Id: I4e5474e8fc51d2ba8a0baca68e11df1346d7d4ab
So far we were executing all our TTCN-3 tests from a container
image with Debian stretch (9) plus a custom more recent eclipse-titan
package from the osmocom feed.
Let's update the container base OS from stretch (9) to bullseye (11)
while using the same packaged eclipse-titan version (8.0.0) for running
the tests. So this should be a low-risk change, as titan runtime
remains identical.
I've executed all test suites locally and couldn't see any regressions.
Related: OS#4969
Change-Id: Ib3bdfa3bec8f8ef42c55ca61cdee8fbca923874f
I don't really see the point of crating 19 MBytes of logs for every
ttcn3-bsc-* test run that consists mainly of debug messages about
sending a message from left to right. osmo-stp is not the IUT here,
but merely a part of the test fixture. Let's reduce log verbosity.
Change-Id: If1d22814d89c4e52b3b7804110256d896b7cc99f
This enables the test suite to obtain talloc reports between the
test case executions, which get stored together with the PCAP files.
Let's see how it works with the mentioned projects first; others
can be configured later. See [1] for more details.
Change-Id: Icd4c2d80db934535d499598282ed9416d8088163
Related: [1] I1b03b17426d8760c55976e3b78ca2f3af248c055
Related: OS#5328
Write a line like 'Misc_Helpers.mp_osmo_repo := "nightly"' into the
TTCN-3 config file (e.g. BSC_Tests.cfg), before starting the testsuite.
This allows executing different code paths in the tests based on the
repository.
Related: OS#5327
Change-Id: Ic06532f7a67e59458652c5cf4c8f6fee8113e703
This module parameter is never set to false anymore, since latest
already supports the feature for a while.
The module parameter will be removed soon in osmo-ttcn3-hacks, so let's
drop using it here too.
Change-Id: Idf459365e9aa42f7efd2a418cadea63ec49bdd7a
With this we'll avoid running the test in latest. This way we'll not
fail after changing the TS for the test and hence other tests won't be
affected.
Related: SYS#5309
Change-Id: If941c110501cd5f9c1d5084cc4d054e1eafb14f4
The test that needs A5/4 enables it dynamically, and a new test requires
a defined value to reset to.
This reverts commit 8005014b55.
Related: OS#4975
Depends: osmo-ttcn3-hacks I3cf36c6ef86a0db050507f3737f4b0c10dcd52ed
Change-Id: I55135ca00ef51de5cf6eaec75cfc20c21beef665
it has been deprecated in libosmocore.git 2.5 years ago:
commit 7e0686c6b4b456ec4e6e15689694b1bcf96c301f
Author: Neels Hofmeyr <neels@hofmeyr.de>
Date: Mon Sep 10 20:58:52 2018 +0200
Change-Id: Ia6946fae497319a894d4e664ac8642340620822e
This param is true by default and there's no one setting it to false
anymore (and soon will be removed).
Related: OS#5042
Change-Id: I1780320c69ec4a9f086677fd4884dec674f8332e
This param is currently set to true by default and will be removed soon.
Related: OS#5042
Depends: osmo-ttcn3-hacks.git Change-Id I4e2049c109986906d3c985ca2282174b1abff581
Change-Id: I3c7e7dc985a339d884dc388b33bf8a6ec986c5b7
Abort the script and trigger the clean up script, whenever any of the
commands below to prepare the testsuite are failing. This saves time
with figuring out why suddenly all or most tests are failing, and avoids
running the entire testsuite on jenkins if it's obviously not going to
work.
Related: OS#3208
Change-Id: Ie68da2affda8c96b3a515a857a921a05f1bf8ef7
Add set_clean_up_trap() in jenkins-common.sh and run it at the beginning
of the jenkins.sh files. Move the common clean up code from the end of
every jenkins.sh file into clean_up_common(), which gets called by the
trap. Add a custom clean_up() function to those jenkins.sh files that
need additional clean up.
Replace explicit container stop commands (for containers attached to the
docker network) with one call to network_clean() in clean_up_common(). It
kills all containers attached to the docker network.
The motivation for this change is the upcoming optional build of initrd
and kernel during ttcn3-ggsn-test/jenkins.sh. After building these, a
short smoke test will be performed to make sure we can boot the kernel
and initrd, before continuing to run the entire testsuite against it. If
building or the smoke test fails, we must do a proper clean up of the
network and fix permissions.
Related: OS#3208
Change-Id: I807c6221d22fec31db23e2516e477a3eb43347fb
These changes are no longer needed since master versions of whole CNI
have been recently released.
Related: OS#5042
Change-Id: I6f491b58d4576b22c8ff3ab56a7b9e17163a8739
Allow jenkins to fetch the image from our private docker registry.
Outside of jenkins, the image is built locally just like before.
Related: OS#5017
Change-Id: I46cc176ea09d8badc359b627d7ce2f459211258c
While I'm at it with tidying up the Dockerfiles, create a
ttcn3-docker-run.sh with shared run code.
Related: OS#5017
Change-Id: Id90769707158f0488eca2313c57b99ea7a4a27c8
Create symlinks to ttcn3-*-start.sh and ttcn3-*-stop.sh in the
prepare.sh script instead of in each of the ttcn3 Dockerfiles.
Related: OS#5017
Change-Id: I634cf71cff7936efe6e0461d21dc1119de922ada
Move the git fetch/checkout code and make call to build the testsuite,
to debian-stretch-titan/ttcn3-docker-prepare.sh. In the next patch, I
will extend the script to update deps right before building too (e.g.
because OSMO_TTCN3_BRANCH changed).
Related: OS#5017
Change-Id: I4b5bedf058dc527e821f9b7204c632820e671af9
Clone the osmo-ttcn3-hacks and all dependency repositories less often by
moving related commands to the shared debian-stretch-titan image.
Remove the 'git checkout -f -B master origin/master' line, because the
master branch is checked out by default.
While at it, move the shared "git config" commands too, and move them
before cloning the repositories, so they don't run again whenever the
deps change (logic to invalidate the cache if deps change will be added
in the next patch).
Related: OS#5017
Change-Id: I2bb142dce061eba4b6a828c4e435510e309989fd
Remove leftover from old TTCN-3 build scripts, before refactoring ttcn3
Dockerfiles. This line has already been removed in 357ec806 from 2017 for
ggsn-test.
In osmo-ttcn3-hacks.git, this is only referenced in the obsolete
bin/install.script (looks like we could remove that, together with the
rest of the bin dir?).
Related: OS#5017
Change-Id: Id23e7fae58ba246916a38aa0a10035d4f67f7588
This part is missing from the already merged
I3394f391a6068ab8afeafa329b69a8ae4ad05cd9
which enabled LCS tests for osmo-bsc.
Change-Id: I873d6e46e00ee0e91b15d719829baff2bf9f115a
Notably LCS tests are still disabled, just routing BSSMAP-LE/SCCP via STP to
the virtual SMLC is now possible.
Change-Id: Ic296291886ce18fd3ff34d45c519de605ba827cc
Introduce this switch for enabling the Lb interface startup, and first off set
to false everywhere. A later patch will enable Lb where it makes sense.
Depends: Idf463c3c2169cad953b4ebc5b5845b31d5efb848 (osmo-ttcn3-hacks)
Change-Id: Id26064931c482c25217bccdeec866e9afc1fd9b5
Adjust osmo-bsc.cfg to work with osmo-bsc
Icaa2775cc20a99227dabe38a775ff808b374cf98 and osmo-ttcn3-hacks
I7eea0dd39de50ed80af79e0f10c836b8685d8644.
Related: Icaa2775cc20a99227dabe38a775ff808b374cf98 (osmo-bsc)
Related: I7eea0dd39de50ed80af79e0f10c836b8685d8644 (osmo-ttcn3-hacks)
Related: OS#4702
Change-Id: I9e9760121265b3661f1c179610e975cf7a0873f1
We previously only allocated IPv4 sub-nets to the network segments
created with 'docker network'. Let's fix that by assigning both
IPv4 and IPv6 address ranges to each docker network.
Related: OS#4700
Change-Id: I8802208fddcce1ffa57e5626575d23d02b320d99
Fix the TC_si2quater_* test fallout.
When adjusting the bsc AoIP test config, forgot to also adjust the SCCPlite
test suite config, which caused fallout in the SCCPlite tests.
Related: Idbcc703ace7012fb395f0eef3e445df28b368d74 (docker-playground)
Related: Iac46ee2cc5bc0978d5f5baa550baf493a7c56b1b (osmo-ttcn3-hacks)
Change-Id: I810ff6f89d722e7274046c360a2cbebf6f6ee53a
The bsc/BSC_Tests_CBSP.ttcn rely on a configuration where the first three BTS
carry out SMSCB messaging, and the fourth BTS does not. That requires a CBCH
channel config on bts 0, 1, 2.
Related: Iac46ee2cc5bc0978d5f5baa550baf493a7c56b1b (osmo-ttcn3-hacks)
Change-Id: Idbcc703ace7012fb395f0eef3e445df28b368d74
Pau Espin
Oliver Smith
Vadim Yanitskiy
Harald Welte
Neels Hofmeyr
Philipp Maier
Daniel Willmann