Allow to pass options to each "docker run" line in the various
jenkins.sh scripts. I'm using this to run the testsuites and Osmocom
components in docker with the same configurations as jenkins, but with
Osmocom and testsuite binaries built outside and mounted into the
containers:
DOCKER_ARGS="-v /usr/local:/usr/local:ro -v $hacks:/osmo-ttcn3-hacks:ro"
This allows very short test cycles without a second set of configs. The
full script that makes use of this feature is in osmo-dev.git,
ttcn3/ttcn3.sh.
Change-Id: I8d1f78aee926f8f6ec0b704e16639bc83f525816
It was removed since latest osmo-ggsn release is nowadays 1.5.0.
Depends: osmo-ttcn3-hacks.git Ie1c3cde2a01e8ea49aadcb1f7384995cb68039cb
Change-Id: I9ffd7549172055e6180a5c3f167dcc1133648243
Configure each osmo-* program to send GSMTAP log output to the IP of the
docker container, which runs the testsuite (and therefore runs tcpdump).
Related: https://lists.osmocom.org/pipermail/openbsc/2019-June/012946.html
Change-Id: I99e74f6ffb5b7d566cec35995bf067df414968d8
Replace 'git checkout -f -B $BRANCH origin/$BRANCH && \' in all
Dockerfiles that accept branch variables ($OSMO_TTCN3_BRANCH,
$OSMO_MGW_BRANCH, ...) with the following:
git checkout $BRANCH && \
(git symbolic-ref -q HEAD && git reset --hard origin/$BRANCH || exit 1); \
This allows using branch names and commit hashes in the $BRANCH
variables. Using commits is needed for the bisect script added in [1].
The second line ("(git symbolic...") checks if we are in detached HEAD
state after the checkout, and if we are not, pulls in all new commits
from origin/$BRANCH. Note that it ends in ';' instead of '&&', because
the command in the next line should be executed even if
"git symbolic-ref" does not exit with 0 (detached HEAD state).
Here is an example, to illustrate that the new command does the right
thing. Clone a repository and be 50 commits behind origin/master:
$ git clone "https://git.osmocom.org/osmo-mgw"
$ cd osmo-mgw
$ git reset --hard origin/master~50
With BRANCH="master":
$ git checkout master && \
(git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); \
echo "done"
Already on 'master'
...
done
$ git status
Your branch is up-to-date with 'origin/master'.
With BRANCH="85978d":
$ git checkout 85978d && \
(git symbolic-ref -q HEAD && git reset --hard origin/85978d || exit 1); \
echo "done"
Note: checking out '85978d'.
...
done
$ git status
HEAD detached at 85978dad
Related previous changes:
* [2] made it work for commit hashes, but broke using branch names other
than master, and pulling in new commits from master
* [3] made branches other than master work again, but did not fix
pulling in new commits from master
* [4] reverted [3] and the git checkout related part from [2]
[1] Change-Id: I11f7e61a9b30d58a0fdfcaf77dde447806bf661f
[2] Change-Id: If3bc5fae07cf63c4fef68306be4c4328660bc869
[3] Change-Id: I2ff745c8d19b777d876170d5717c082ceb68a1f3
[4] Change-Id: Ie6da0f9ea96f11407e38545a6b3cf22ef9cadc25
Related: OS#4015
Change-Id: I4004980baf0b7d6096702b6f3067ccbdb369a28c
Unfortuately this commit will check out *local* master (i.e. the
previous checkout) rather than the origin/master as it's supposed to
be. This means that ever since merging this patch, our ttcn3 tests
were running some "undefined" stale versions and not current master.
This reverts commit 26565bb729.
Change-Id: Ie6da0f9ea96f11407e38545a6b3cf22ef9cadc25
Replace the following statements:
a) "git checkout -f -B $BRANCH origin/$BRANCH"
b) "git checkout -f -B $BRANCH $BRANCH"
with:
c) "git checkout -f $BRANCH"
Regarding a), we don't need to specify 'origin/' for each branch, since
we are cloning the repositories in the same Dockerfile, and therefore we
know for sure that there is only one remote and branch names won't be
ambiguous. Removing the 'origin/' allows to put commit hashes into the
branch variables (like done in the new bisect script [1]).
Version b) does not work with branch names:
$ git checkout -f -B osmith/check-imei-before-lu osmith/check-imei-before-lu
fatal: Cannot update paths and switch to branch 'osmith/check-imei-before-lu' at the same time.
Did you intend to checkout 'osmith/check-imei-before-lu' which can not be resolved as commit?
New version c) works with both commits and branches, and it is shorter.
[1] Change-Id: I11f7e61a9b30d58a0fdfcaf77dde447806bf661f
Change-Id: I2ff745c8d19b777d876170d5717c082ceb68a1f3
This is quite useful when looking at jenkins logs to know which exact
version was built at the time.
Change-Id: Id52c382b454e2beecf46820752aeff15b2c1a0ae
Make the TTNC3 tests pass that were added in Change-Id
I3bab7df5caddc5c8b973c81544f954d5473ac234 (osmo-ttcn3-hacks.git).
Related: OS#2900
Change-Id: Icc1ae87d87f61e2d1d0b8c6b14d28aeed56a6931
Default value "master" of the IMAGE_SUFFIX environment variable can be
changed to "latest" to test the latest stable builds instead of the
nightly ones. Use docker_images_require() to make sure that the required
images are existing and up-to-date before running the tests.
Related: OS#3268
Change-Id: Idbb708ab16cb71bab5069127945b63388222369e
Instead of hardcoding laforge's username in all FROM statements in the
Dockerfiles, make use of the USER variable (as passed through by the
"make/Makefile" with "docker build --build-arg USER=..."). Thanks to
fixeria for proposing this fix!
This requires running docker-ce, old versions of docker (such as the
one in the official repositories of the latest Fedora) don't support
variables in the FROM line. But docker-ce can be installed after
adding docker's 3rd party repositories.
Closes: OS#3457
Change-Id: Ic5f11c8a4e247f632cb6aea6d147e94c53e0130f
Previous to this commit, log messages were not being merged if tests
were resolved as failed (test-suite.sh ending with exit code != 0),
which can happen if at least one test failed.
Change-Id: If293fc2d3182ef2a7b997faa8b41129a9dd89c45
Do not brush over VOL_BASE_DIR with a new temp dir, since jenkins-common.sh has
already figured out where these should run.
Should fix jenkins job build failures for mgw and ggsn, after the merge of
I8cf6014725ae8ba602be5f3ec31dfb8e49ff993e.
Change-Id: Iee034df93bf8e8b995262749cf4654886032af2b
In Change-Id: I1dc299407c61b1c865035add44067b8ab89001b3
a VTY interface was added to osmo-ttcn3-hacks.git, but
it was missed to update the config file here for the dockerized
execution, rendering us with broken test builds ever since.
Change-Id: I9539f7a28cf9214bd73ac9f80d22c71041c47adb
Related: OS#2519
To remove code dup and prepare a change to where logs are written, add
collect_logs() to jenkins_common.sh and call that from each jenkins.sh after
the tests are done.
The 'rm -rf' is already done before a test starts. No need to do that again
after each test.
Change-Id: I5d8472ec36b07c828685b1bd7718e31392d168a3