Vadim Yanitskiy
078717ab2b
ttcn3-bts-test/fh: do not configure CBCH slots statically
...
In BTS_Tests_SMSCB, we dynamically configure the CBCH slots via
the VTY interface, so there is no need to set them here. This
was also the reason of some SMSCB test case failures, because
the BSC would send unexpected LOAD INDICATIONs.
Change-Id: I6e005ca772e26878c7b19df0d854936d7b7718dd
Related: SYS#4868, OS#4708
2020-09-12 20:16:31 +07:00
Vadim Yanitskiy
a21c4f2fac
ttcn3-bts-test/fh: fix: do not run BTS_Tests.control twice
...
Apparently, TITAN concatenates the contents of all sections, so
we end up with the following set of test cases:
[EXECUTE]
BTS_Tests.control
BTS_Tests_SMSCB.control
BTS_Tests_LAPDm.control
BTS_Tests.control
Change-Id: I71802daec4a5591cbf0fce59a4247027f8dfca46
Related: SYS#4868, OS#4546
2020-08-13 19:27:39 +00:00
Vadim Yanitskiy
9619d2355b
ttcn3-bts-test: add configuration with frequency hopping parameters
...
The Physical channel configuration is the same as in the non-hopping
configuration file. Hopping parameters are listed below the table.
== Physical channel configuration (FDMA) ==
+-------+------------------+------------------+------------------+------------------+
| # / # | TRX#0 | TRX#1 | TRX#2 | TRX#3 |
+-------+------------------+------------------+------------------+------------------+
| ARFCN | 871 | 873 | 875 | 877 |
+-------+------------------+------------------+------------------+------------------+
== Physical channel configuration (TDMA) ==
+-------+------------------+------------------+------------------+------------------+
| # / # | TRX#0 | TRX#1 | TRX#2 | TRX#3 |
+-------+------------------+------------------+------------------+------------------+
| TS0 | CCCH+SDCCH4 | TCH/F (a) | TCH/F (a) | TCH/F (a) |
+-------+------------------+------------------+------------------+------------------+
| TS1 | TCH/F | SDCCH8+CBCH | SDCCH8+CBCH (b) | SDCCH8+CBCH (b) |
+-------+------------------+------------------+------------------+------------------+
| TS2 | TCH/F (c) | TCH/H (c) | TCH/F (d) | TCH/H (d) |
+-------+------------------+------------------+------------------+------------------+
| TS3 | TCH/F_PDCH (e) | TCH/F_PDCH (e) | TCH/F_PDCH (e) | TCH/F_PDCH (e) |
+-------+------------------+------------------+------------------+------------------+
| TS4 | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH | TCH/F_TCH/H_PDCH |
+-------+------------------+------------------+------------------+------------------+
| TS5 | TCH/H (f) | TCH/H (f) | TCH/H (f) | TCH/H (f) |
+-------+------------------+------------------+------------------+------------------+
| TS6 | SDCCH8 (g) | PDCH (h) | PDCH (h) | SDCCH8 (g) |
+-------+------------------+------------------+------------------+------------------+
| TS7 | PDCH (i) | PDCH (j) | PDCH (i) | PDCH (j) |
+-------+------------------+------------------+------------------+------------------+
== Hopping configuration ==
a) HSN=0, MAIO=0,1,2
b) HSN=1, MAIO=3,5
c) HSN=2, MAIO=0,1
d) HSN=2, MAIO=2,3
e) HSN=3, MAIO=3,2,1,0
f) HSN=5, MAIO=0,1,2,3
g) HSN=6, MAIO=1,0
h) HSN=6, MAIO=1,0
i) HSN=0, MAIO=1,3
j) HSN=0, MAIO=0,2
Change-Id: I7822c3581fccba3277a63577e740e7486307635d
Related: SYS#4868, OS#4546
2020-07-21 19:46:56 +00:00