This should have been done as part of [1] in order to avoid
regressions in ttcn3-bsc-test-sccplite.
Change-Id: I2d0045533814a2bacc384c06287066f2209a5f38
Fixes: [1] Iba4fbd5c9ed59783df4ac64e68b2beef73a812ff
Related: SYS#5460
This module parameter is never set to false anymore, since latest
already supports the feature for a while.
The module parameter will be removed soon in osmo-ttcn3-hacks, so let's
drop using it here too.
Change-Id: Idf459365e9aa42f7efd2a418cadea63ec49bdd7a
With this we'll avoid running the test in latest. This way we'll not
fail after changing the TS for the test and hence other tests won't be
affected.
Related: SYS#5309
Change-Id: If941c110501cd5f9c1d5084cc4d054e1eafb14f4
The test that needs A5/4 enables it dynamically, and a new test requires
a defined value to reset to.
This reverts commit 8005014b55.
Related: OS#4975
Depends: osmo-ttcn3-hacks I3cf36c6ef86a0db050507f3737f4b0c10dcd52ed
Change-Id: I55135ca00ef51de5cf6eaec75cfc20c21beef665
This param is currently set to true by default and will be removed soon.
Related: OS#5042
Depends: osmo-ttcn3-hacks.git Change-Id I4e2049c109986906d3c985ca2282174b1abff581
Change-Id: I3c7e7dc985a339d884dc388b33bf8a6ec986c5b7
Introduce this switch for enabling the Lb interface startup, and first off set
to false everywhere. A later patch will enable Lb where it makes sense.
Depends: Idf463c3c2169cad953b4ebc5b5845b31d5efb848 (osmo-ttcn3-hacks)
Change-Id: Id26064931c482c25217bccdeec866e9afc1fd9b5
Fix the TC_si2quater_* test fallout.
When adjusting the bsc AoIP test config, forgot to also adjust the SCCPlite
test suite config, which caused fallout in the SCCPlite tests.
Related: Idbcc703ace7012fb395f0eef3e445df28b368d74 (docker-playground)
Related: Iac46ee2cc5bc0978d5f5baa550baf493a7c56b1b (osmo-ttcn3-hacks)
Change-Id: I810ff6f89d722e7274046c360a2cbebf6f6ee53a
Adjust the SCCPlite osmo-bsc.cfg according to changes applied in osmo-bsc.cfg,
which were obviously forgotten to also apply to the SCCPlite test runs.
Do the same logging in both SCCPlite and AoIP osmo-bsc.cfg.
Change-Id: I4a8fe459ec580078228c6775df357b6e0acbbb03
Adjust the SCCPlite osmo-bsc.cfg according to changes applied in osmo-bsc.cfg,
which were obviously forgotten to also apply to the SCCPlite test runs.
Make the SI2quater config reflect that of the AoIP osmo-bsc.cfg.
Change-Id: I4dbabcc28309424a336d2a052a067484d17663ac
Adjust the SCCPlite osmo-bsc.cfg according to changes applied in osmo-bsc.cfg,
which were obviously forgotten to also apply to the SCCPlite test runs.
These handover config changes should fix the TC_ho_* tests in
ttcn3-bsc-sccplite.
Change-Id: I9694863b2db6be6384d1d6ffb35fc477fe774d02
Forgot to also adjust the SCCPlite structure in previous commit
c7b52048e6, which broke SCCPlite testing.
Change-Id: I923e398ccd4bdd31c8325de1a850fe4c3236db79
EGPRS Packet Channel Request cannot be enabled in 'GPRS only' mode
anyway. Moreover, this command was deprecated. Let's just remove it.
Change-Id: I03733490d9c4bf78a748d22874e550e015fbab78
In the recent osmo-bsc master, this configuration parameter has
been removed, so it fails to start due to "unknown parameter".
Change-Id: I8f763a4b35f80f4db637bebdd8e802a835a9fd2d
As of Change-Id Id965295dfe04f8bd5ce831db70c86f67b8dc290b the
bogus 'NAT' log category has been removed from osmo-bsc.
Change-Id: Ie2afacfc15589c26238214cddc00baaf80e993c1
The logging categories cc and mgcp are obsolete. The tests still contain
logging statements with those categories, which makes osmo-bsc
terminate during startup while parsing the configuration file.
Change-Id: Ifd6bf46b73420c0443f997ea953318710544b751
Have the same amount of bts like in the regular (non-sccplite)
osmo-bsc.cfg, so we can make BSC_Tests.TC_ctrl pass for regular and
sccplite again.
Related: I1c57a04747f5ec004ccf4657954dcb0b003c24fc
Related: Ie2c664ba0f845da644e20e2c919c12d8fc2af6ba (osmo-ttcn3-hacks)
Related: OS#4156
Change-Id: I00547dccf8908d46df4730cb513fe577956d7683
Configure each osmo-* program to send GSMTAP log output to the IP of the
docker container, which runs the testsuite (and therefore runs tcpdump).
Related: https://lists.osmocom.org/pipermail/openbsc/2019-June/012946.html
Change-Id: I99e74f6ffb5b7d566cec35995bf067df414968d8
Recent commit added bits to disable "osmux on/off" vty commands on
"-latest" tested, but forgot to add required line in
sccplite/BSC_Tests.cfg for sed command in jenkins.sh script to work.
Fixes: 2cdab85e5f
Change-Id: I9b4ce2d7151d65b4c83417a59fd01672971b3937
Since Ib2335d02ea545aff837aadd49f15b2fdb418c46e, this VTY option
is deprecated in osmo-bsc, so let's actualize the config files.
Change-Id: I709e1afd2a9cccdc92eec312dff607947a10c299
This mirrors osmo-ttcn3-hacks change:
"bsc: inter-BSC HO: add TC_ho_out_of_this_bsc, TC_ho_into_this_bsc"
change-id Id22852d4be7f127d827e7a8beeec55db27c07f03
(As well as removal of the 'add' keyword in change-id
I6a83a8d4ba61b87905c6fae457d4b4eb6078dce9 after osmo-bsc change
I143f21f6069d1a86096cc8240cf69eb7ea9c8ac8.)
Related: OS#2283
Change-Id: I077c2ad2ede900ec43f55655bd740651d3bbe83d
The osmo-sip-connector test is already using 172.18.11.x, let's migrate
sccplite to 172.18.12.x to prevent any conflicts when running both tests
on the same build slave (docker instance).
Change-Id: I96beed1f5e01bdb8e77e20f77a459aa006de10fe
The existing dest config + jenkins.sh test 3GPP AoIP operation,
while the new set of configs + jenkins-sccplite.sh are testing
IPA/SCCPlite operation of osmo-bsc.
Change-Id: Ief0799a8f7d378dc3831e7988c9175166c82eace
Vadim Yanitskiy
Pau Espin
Oliver Smith
Neels Hofmeyr
Daniel Willmann
Harald Welte
Philipp Maier