This proposal adds a new option '-b printname:<filename>' to dumpcap. If
used, dumpcap will print the name of each ring buffer file it creates
after it is closed. Allows the use of '-'/'stdout' and 'stderr'.
Use case: Since the file name is printed after the file is closed for
writing, an automated capture process can do something like the
following with the guarantee that the file in question will not be
changed.
dumpcap -i eth0 -b files:2 -b printname:stdout [-b ...] | \
while read cap_file_name ; do
# Do something with $cap_file_name
done
This sort of scripting is difficult in dumpcap's current form. Dumpcap
prints the names of new files to stderr as it *opens* them, so a script
attempting to use this must sleep for "-b duration:value" seconds plus
some fudge time to be sure it's getting a closed, unchanging file.
Change-Id: Idb288cc7c8c30443256d35c8cd4460a2e3f0861c
Reviewed-on: https://code.wireshark.org/review/37994
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
pcapng has been the compile-time default since 2011. If there are any
users who would like to use the libpcap format, then they should use
runtime options instead (e.g. `tshark -P` or `editcap -F pcap`).
Change-Id: I54b70368cdc3ca78bc8617bc488cc687740a1eb9
Reviewed-on: https://code.wireshark.org/review/36721
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make it possible to remove the "Capture to a permanent file" setting
in Capture Interfaces Output dialog by turning off saving_to_file in
updateInterfaces().
Also make sure to free the old values for save_file and orig_save_file
to avoid memory leaks.
Set orig_save_file to the same as save_file from the '-w' option to
fill in the current "Capture to a permanent file" value correctly.
Change-Id: I1f4df8cfa279f934eff028f32838b9734b627af1
Reviewed-on: https://code.wireshark.org/review/32111
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
cmdarg_err() is for reporting errors for command-line programs and
command-line errors in GUI programs; it's not something for any of the
Wireshark libraries to use.
The various routines for parsing numerical command-line arguments are
not for general use, they're just for use when parsing arguments.
Change-Id: I100bd4a55ab8ee4497f41d9651b0c5670e6c1e7f
Reviewed-on: https://code.wireshark.org/review/31281
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add the ability to rotate files after a specified number of packets (`-b
packets:NUM`). Move some condition checks to capture_loop_write_packet_cb.
Add `-a packets:NUM` in order to be consistent. It is functionally
equivalent to the `-c` flag.
Add a corresponding "packets" option to the Capture Interfaces dialog
Output tab.
Add initial tests for autostop and ringbuffer conditions.
Change-Id: I66eb968927ed287deb8edb96db96d7c73526c257
Reviewed-on: https://code.wireshark.org/review/30534
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
valgrind --tool=memcheck --leak-check=full ./run/tshark -r sctp.pcap -U "OSI layer 3" -w exported.pcap
13 bytes in 1 blocks are definitely lost in loss record 20 of 93
at 0x4C2EBAB: malloc (vg_replace_malloc.c:299)
by 0xB27B3C5: g_malloc (gmem.c:99)
by 0xB294D22: g_strdup (gstrfuncs.c:363)
by 0x117B5D: capture_opts_add_opt (capture_opts.c:889)
by 0x118C0E: main (tshark.c:1112)
Change-Id: I9b794015aa4d2626b43a5743864c2d732c6acaa1
Reviewed-on: https://code.wireshark.org/review/29125
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
capture_opts_add_iface_opt(), when called in a program acting as a
capture child, will fetch the description for the interface, and will
also generate a "display name" for the interface.
In the process, we clean up capture_opts_add_iface_opt() a bit,
combining duplicate code.
We rename console_display_name to just display_name, as it may also be
used in the title bar of Wireshark when capturing.
Change-Id: Ifd18955bb3cb41df4c0ed4362d4854068c825b96
Reviewed-on: https://code.wireshark.org/review/29117
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Iff833bf5c197959c8decb62d6ce794c6d0415fb7
Reviewed-on: https://code.wireshark.org/review/26978
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Document ws_pipe.h. Define invalid PIDs in one place.
Extcap didn't use stdin before 1a0987904f. Make sure we close it.
Change-Id: I7a69cd9b5137ae82435e64628a22e4d812d58f89
Reviewed-on: https://code.wireshark.org/review/26226
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move the contents of extcap_spawn to ws_pipe. Rename various extcap_*
prefixes to ws_pipe_*. Open stdin when we spawn processes.
Change-Id: I9286295443ee955bb6328b0ed6f945ee0bb2a798
Reviewed-on: https://code.wireshark.org/review/26216
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
At one point, I remember a discussion resulting in the official name of
the next-generation replacement for pcap format being changed to
"pcapng", with no hyphen.
Make Wireshark reflect that.
Change-Id: Ie66fb13a0fe3a8682143106dab601952e9154e2a
Reviewed-on: https://code.wireshark.org/review/25214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Fix a regression introduced by I09beab751c9c2917f017b6c082166d86ca693544.
Change-Id: I57b971086470e836f4147500143c35494118e754
Reviewed-on: https://code.wireshark.org/review/24765
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
A while back Graham pointed out the SPDX project (spdx.org), which is
working on standardizing license specifications:
https://www.wireshark.org/lists/wireshark-dev/201509/msg00119.html
Appendix V of the specification describes a short identifier
(SPDX-License-Identifier) that you can use in place of boilerplate in
your source files:
https://spdx.org/spdx-specification-21-web-version#h.twlc0ztnng3b
Start the conversion process with our top-level C and C++ files.
Change-Id: Iba1d835776714deb6285e2181e8ca17f95221878
Reviewed-on: https://code.wireshark.org/review/24302
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
At shutdown the array keeping all interface_options is freed.
The array elements however are not making valgrind and ASAN
complain. Make sure the elements are freed on cleanup.
Ping-Bug: 13864
Change-Id: If8b810ea5f4f11c5ce770a9ffa6c2c791bc561fe
Reviewed-on: https://code.wireshark.org/review/23265
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Change access of ifaces elements from by val to by reference.
With this change unnecessary copying of the whole struct is avoided
but even more important is that elements no longer have to be
removed and inserted whenever data is updated.
This change aims to make it more clear that ifaces elements shall
never directly be removed from the array. Instead use function
capture_opts_del_iface
NOTE: Code for GTK UI not updated
Ping-Bug: 13864
Change-Id: I04b65d5ee36526b30d959b8e5a2a48a3c7c4f15b
Reviewed-on: https://code.wireshark.org/review/23204
Reviewed-by: Anders Broman <a.broman58@gmail.com>
At shutdown the array keeping all network interfaces is freed.
The array elements however are not making valgrind and ASAN
complain. Make sure the elements are freed on cleanup.
Ping-Bug: 13864
Change-Id: I1efeb03f42fb6f0b87dada8ef50d85f47f93e0dc
Reviewed-on: https://code.wireshark.org/review/23202
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change access of all_ifaces elements from by val to by reference.
With this change unnecessary copying of the whole struct is avoided
but even more important is that elements no longer have to be
removed and inserted whenever data is updated.
This change aims to make it more clear that all_ifaces elements
shall never be removed from the array without freeing resources
via the capture_opts_free_interface_t function.
NOTE: Code for GTK UI not updated
Ping-Bug: 13864
Change-Id: I36742cb1d5c8daa136c9d3732a044a7c8e5c7fe7
Reviewed-on: https://code.wireshark.org/review/23201
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for extcap control pipes on Windows.
Improved read loop in InterfaceToolbarReader.
Delay opening control pipes until extcap has opened the fifo pipe.
Make extcap_example.py work on Windows.
Bug: 13833
Change-Id: I4b47d25452637759b8a3be53be48eee5365bc0e4
Reviewed-on: https://code.wireshark.org/review/23211
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
On Windows the pipe names does not get random characters appended.
Add the interface name and pipe type to make it unique.
This partly fixes the issue with capturing from multiple extcap
interfaces on Windows.
Ping-Bug: 13653
Ping-Bug: 13833
Change-Id: I4290b37cf789bf77608993682a803aca29513d28
Reviewed-on: https://code.wireshark.org/review/23158
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The interface_options struct passed to dumpcap is populated
differently when running Wireshark with and without -k.
Previously, only with -k was there a valid pointer in
interface_opts.timestamp_type
Fixes: aca55a2 ("Add hardware timestamping support")
Signed-off-by: Ahmad Fatoum <ahmad.fatoum@siemens.com>
Change-Id: Ic7ecc5a1190c28197d6a7271f1b353f74d43ca61
Reviewed-on: https://code.wireshark.org/review/23160
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
pcap provides a pcap_set_tstamp_type function, which can be used to request
hardware timestamps from a supporting kernel.
This patch adds support for aforementioned function as well as two new
command line options to dumpcap, wireshark and tshark:
--list-time-stamp-types
List time stamp types supported for the interface
--time-stamp-type <type>
Change the interface's timestamp method
Name choice mimics those used by tcpdump(1), which already supports this
feature. However, unlike tcpdump, we provide both options unconditionally.
If Wireshark was configured without pcap_set_tstamp_type being available,
--list-time-stamp-types reports an empty list.
Change-Id: I418a4b2b84cb01949cd262aad0ad8427f5ac0652
Signed-off-by: Ahmad Fatoum <ahmad.fatoum@siemens.com>
Reviewed-on: https://code.wireshark.org/review/23113
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the "interval" option to "-b". Each new capture starts at the
exact start of a time interval. For instance, using -b interval:3600
will start a new capture file at each whole hour.
Changed the duration option in the GUI interfaces to use the new
interval option.
Change-Id: I0180c43843f5d2f0c2f50153c9ce42ac7fa5aeae
Reviewed-on: https://code.wireshark.org/review/22428
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Sake Blok <sake.blok@SYN-bit.nl>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
An extcap utility can provide configuration for controls to use in a
GUI interface toolbar. This controls are bidirectional and can be
used to control the extcap utility while capturing.
This is useful in scenarios where configuration can be done based on
findings in the capture process, setting temporary values or give other
inputs without restarting current capture.
Todo:
- Add support for Windows
Change-Id: Ie15fa67f92eb27d8b73df6bb36f66b9a7d81932d
Reviewed-on: https://code.wireshark.org/review/19982
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
It doesn't belong in libwireshark, as it doesn't affect dissection, but
it *does* belong in libui, as it's helper code for the UIs.
Change-Id: I8a5e0640a299a08e9ec1917dd253197438ebfdbc
Reviewed-on: https://code.wireshark.org/review/20974
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The cleanup routine has been added to exit section of the applications.
Those which required a exit restyle have been patched as well.
Change-Id: I3a8787f0718ac7fef00dc58176869c7510fda7b1
Reviewed-on: https://code.wireshark.org/review/19949
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
This required a restyle of the way the different apps exit.
Change-Id: Iedf728488954cc415b620ff0284d2e60f38f87d2
Reviewed-on: https://code.wireshark.org/review/19780
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Use the get.*guint32 routines to get unsigned values.
Change-Id: I75e83b2d21bdf08c7c995e36e4deb3b1c6d6959d
Reviewed-on: https://code.wireshark.org/review/17651
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This patch reads out the stderr messages from an extcap
utility and displays it to an user. It was tested on Qt
but not on GTK, but should work their as well.
On Mac OS/X and Windows the child_watch does not behave
as it was intended. Therefore in extcap_cleanup, the callbacks
are called manually, if and only if, they have not been
called already.
The reason why it displays two error messages is, that
by the time the first one is being displayed, glib has not
returned from the spawned process on Linux yet. So there
is no way to add the stderr correctly, and putting a handler
to stderr into interface_opts will lead to memory errors,
cause then the code tries to access memory outside of its
protection.
Bug: 11892
Change-Id: I2db60dd480fed3e01428b91a705057e4f088bd15
Reviewed-on: https://code.wireshark.org/review/12954
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move g_spawn to separate file and implement functions to
use Windows based method of spawning, instead of the glib
based version
Change-Id: Ibae03d834ec86531eba37dc8768fbf17ddadf57f
Reviewed-on: https://code.wireshark.org/review/16049
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Really, all the GUI-related options should be pulled out, so they're not
cluttering up dumpcap and tshark.
Change-Id: I0276dee2be48bae3498a819d8c0c2747fe1352e7
Reviewed-on: https://code.wireshark.org/review/16180
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Move ui/filters.[ch] to filter_files.[ch] because dumpcap is using functionality.
Bug: 8091
Change-Id: I195c82fc023f97d6f331b8718c45a2d83d30faea
Reviewed-on: https://code.wireshark.org/review/5925
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Valgrind report leaks of several allocations like these:
590 bytes in 50 blocks are possibly lost in loss record 29,818 of 31,670
at 0x4C2B6CD: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0xCB9C8A7: __vasprintf_chk (vasprintf_chk.c:82)
by 0xA3D8DCA: g_vasprintf (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.3200.4)
by 0xA3B846C: g_strdup_vprintf (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.3200.4)
by 0xA3B850B: g_strdup_printf (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.3200.4)
by 0x6F4B51: scan_local_interfaces (iface_lists.c:254)
by 0x6EF3D8: iface_mon_handler2 (iface_monitor.c:113)
by 0xBE56F1D: ??? (in /lib/libnl-3.so.200.3.0)
by 0xBA16F19: ??? (in /usr/lib/libnl-route-3.so.200.3.0)
by 0xBE54E5E: nl_cache_parse (in /lib/libnl-3.so.200.3.0)
by 0xBE585CA: nl_msg_parse (in /lib/libnl-3.so.200.3.0)
by 0x6EF372: iface_mon_handler (iface_monitor.c:123)
When the list of network interfaces is updated allocations done
for global_capture_opts.all_ifaces elements leak memory. Fixed by
introducing a helper function to be used for removing an interface_t
element from all_ifaces array. While at it also fixed misc leaks when
updating individual allocated records of all_ifaces elements.
Change-Id: I035e6936a44edeef2ebe4780931c14cde99e93a4
Reviewed-on: https://code.wireshark.org/review/12209
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Have wsutil/file_util.h include them on UN*X, just as it includes io.h
on Windows, so we can have a rule of "if you do file operations, include
<wsutil/file_util.h> and use the routines in it".
Remove includes of unistd.h, fcntl.h, and sys/stat.h that aren't
necessary (whether because of the addition of them to wsutil/file_util.h
or because they weren't needed in the first place).
Change-Id: Ie241dd74deff284e39a5f690a297dbb6e1dc485f
Reviewed-on: https://code.wireshark.org/review/11619
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Dumpcap captures packets, and supports the usual capture options, so it
needs this, but it does *not* link with libwireshark (deliberately, so
that the libwireshark code isn't linked into a program that might run
with special privileges), so we must not depend on anything in
libwireshark.
Change-Id: Id975fd6a83a4b2a493c67493e41e69b784a050aa
Reviewed-on: https://code.wireshark.org/review/11546
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It ends up dragging in libwireshark headers, which programs not linking
with libwireshark shouldn't do. In particular, including
<epan/address.h> causes some functions that refer to libwireshark
functions to be defined if the compiler doesn't handle "static inline"
the way GCC does, and you end up requiring libwireshark even though you
shouldn't require it.
Move plurality() to wsutil/str_util.h, so that non-libwireshark code can
get it without include epan/packet.h. Fix includes as necessary.
Change-Id: Ie4819719da4c2b349f61445112aa419e99b977d3
Reviewed-on: https://code.wireshark.org/review/11545
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Extcap parameters must be saved when doing the interface number/name matching,
otherwise extcap program is not launched and pipe is not created
Change-Id: Iaa0c9ad145049ee6e7a285dfca904ceb0baf417f
Reviewed-on: https://code.wireshark.org/review/8017
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
It can be set if either 1) this is Windows (where we're assumed to be
using WinPcap, which includes calls to set the buffer size) or 2) we
have pcap_create() (in which case we also have pcap_set_buffer_size(),
at least in a normal libpcap release).
Use that rather than testing "defined(_WIN32) ||
defined(HAVE_PCAP_CREATE)"; that makes it a bit more obvious what's
being tested.
Change-Id: Id9f8455019d19206b04dd6820a748cb97ae5ad12
Reviewed-on: https://code.wireshark.org/review/7816
Reviewed-by: Guy Harris <guy@alum.mit.edu>
g_ascii_isXXX() can be handed a char value safely; they won't try to use
it as an index into a table before checking it.
Change-Id: Icf80163fb5f9dccd0b97917e318b1db0bf3e0cf8
Reviewed-on: https://code.wireshark.org/review/4801
Reviewed-by: Guy Harris <guy@alum.mit.edu>