1. Use "exec:" ADB command to get raw (non-PTY) tcpdump output
This is also supported on Android devices before Android 7, and is a
much easier approach than testing the new "shell,raw:" command and
falling back if unsupported. This basically undoes commit 5ebc3277.
2. Pass "-U" to tcpdump to prevent on-target buffering
Before using the "shell,raw" approach in commit 5ebc3277, I tried the
"exec:" command already, but experienced extreme buffering of the
tcpdump output, which is unacceptable for live trace viewing.
Turns out, the buffering is determined "automatically" by libpcap:
- When running in a PTY, output is flushed fast for viewing
- When _not_ in a PTY, output is not flushed and thus heavily buffered.
The "exec" command obviously doesn't use a PTY.
Fortunately, tcpdump has a "-U" option to flush the output after each
catpured packet, which is exactly what we need.
3. Ignore tcpdump stderr output
Enabling "-U" caused androiddump to fail, because it happened that the
tcpdump stderr logs were mixed with the stdout data. (We were probably
lucky this didn't happen without -U as well).
To fix this, we just ignore stderr completely by adding "2>/dev/null" to
the tcpdump command.
4. Get linktype from pcap global header
The stderr logs were previously parsed to get the textual linktype.
This is now replaced by a simpler & less fragile approach: tcpdump
prints the global pcap header, which contains precicesly the linktype
info we need.
5. Parse pcap global header magic correctly for timestamps & endianness
The previous code only supported the "classic" pcap header magic and
might also been incorrect on big-endian host machines.
Now, endian handling is simplified and we can detect the "nanosecond
timestamp" magic values as well.
This fixes the problem that extcap_dumper_dump expects *nano*second
timestamps, but the previous code supplied *micro*seconds if on-target
tcpdump outputs microseconds.
6. The parsing simplifications above allowed the main loop for tcpdump
capture to be simplified considerably.
Change-Id: Id66791e700a8943b86128f044f080bee60a9fa79
Reviewed-on: https://code.wireshark.org/review/25713
Petri-Dish: Michael Mann <mmann78@netscape.net>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Running "tcpdump -D" on target seems to be a expensive operation in some
cases, not finishing within the 500ms timeout on several devices (~1000 ms
in one of our cases).
Change-Id: I57e4d31f12c4e393ff84e79b64cb024b74a11f0e
Reviewed-on: https://code.wireshark.org/review/24719
Reviewed-by: Michal Labedzki <michal.labedzki@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
g995812c5f1 moved wiretap plugins registration from applications to
wiretap library init function.
As we do not want to load plugins for all users of libwiretap, let's
make it configurable.
Bug: 14314
Change-Id: Id8fdcc484e2d0d31d3ab0bd357d3a6678570f700
Reviewed-on: https://code.wireshark.org/review/25194
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If there's a network interface on the device without the 'flags'
field and at the same time exist other network interfaces
with the 'flags' field present a null-dereference happens accessing
the non-matched regex flags field.
Fix crash by adding explicit null check to ensure (optional) regex
group really matched.
Fixes: 7dcf57719f ("androiddump: Support older on-target tcpdump versions")
Change-Id: Ia08dd8547c9cdda96b3c62b99d98ff1d85bd6cd2
Reviewed-on: https://code.wireshark.org/review/25198
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
The output of 'tcpdump -D' only outputs interface flags from Android 7
onwards. Since it would be sad to lose the great androiddump support for
all older devices because of this, the logic is extended so that it
lists all interfaces if no '[' and ']' is found in the output.
Also, the used regex seemed to require an interface description, which
might not exist (even with new tcpdump versions). Now, interfaces
without description are not filtered.
Change-Id: I92b550a37b9bc0d0142aed68ee98f26de79be759
Reviewed-on: https://code.wireshark.org/review/24720
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Devices running Android >= 7 have a different adb shell handling than
before:
- Before Android 7, adb always runs shell commands in a PTY
(pseudoterminal), which automatically converts all \n to \r\n
- Since Android 7, adb no longer uses a PTY if a command is directly
started (like 'tcpdump' in our case).
The original androiddump code reversed the PTY \r\n handling as for
older devices. Commit 66507b9 for bug 13510 removed that which supported
newer devices while breaking all older devices.
This fix tries to support both by first trying to use the new
"shell,raw:" adb command syntax. If that succeeds, adb/device must
support non-PTY shells and we don't reverse any \r\n.
If that fails, it's most likely an older device, and we fall back to the
original "shell:" command and enable \r\n reversal.
(To prevent misleading error popups in Wireshark, the warning log in
adb_send when the first attempt fails is changed to a debug log).
Ping-Bug: 13510
Change-Id: I7e0a4f594ebe5dde682cceb667330459337a0c9c
Reviewed-on: https://code.wireshark.org/review/24721
Reviewed-by: Mikael Kanstrup <mikael.kanstrup@gmail.com>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Put different types of plugins (libwiretap, libwireshark) in different
subdirectories, give libwiretap and libwireshark init routines that
load the plugins, and have them scan the appropriate subdirectories
so that we don't even *try* to, for example, load libwireshark plugins
in programs that only use libwiretap.
Compiled plugins are stored in subfolders of the plugin folders, with
the subfolder name being the Wireshark minor version number (X.Y). There is
another hierarchical level for each Wireshark library (libwireshark, libwscodecs
and libwiretap).
The folder names are respectively plugins/X.Y/{epan,codecs,wiretap}.
Currently we only distribute "epan" (libwireshark) plugins.
Change-Id: I3438787a6f45820d64ba4ca91cbe3c8864708acb
Reviewed-on: https://code.wireshark.org/review/23983
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
This looked a bit odd since the capture filter is variable length.
Removing it makes sshdump work.
Change-Id: I454c6263c04019d5e8ecbecd2490dd10185f5c67
Reviewed-on: https://code.wireshark.org/review/24531
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This sets the scope of the static build option to Wireshark support
libraries only.
Before the patch:
Static plugins don't work with CMake and autotools.
autotools static build is broken, and most likely will always be, as
building Wireshark all-static is difficult and time-consuming.
After the patch:
For CMake Wireshark will be built with static or shared libraries and
dynamic plugins. Everything just works. CMake apparently doesn't want
you building static and shared libraries at the same time.
For autotools Wireshark will be built with shared libraries by default.
--disable-shared and --enable-static options work as usual. Dlopened
plugins are not built if --disable-shared is given to configure (to
disable shared libraries). This is a limitations imposed by libtool.
Tested on Linux. This removes broken support for building plugins
statically.
Change-Id: Ib8e8176976f136eea93a2ce8f9857b6cf9bec64c
Reviewed-on: https://code.wireshark.org/review/24241
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Error checking omitted like in original code.
Change-Id: If8b4181d30ddf5717951aaf7ec61db25c0bc5322
Reviewed-on: https://code.wireshark.org/review/24309
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Change-Id: Id3d9229f5d61390f2f4127c8dfdf445935297e85
Reviewed-on: https://code.wireshark.org/review/24300
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
According to README.extcap documentation all extcap tools must
support the --extcap-dlts option. For performance reasons support
for this option was removed by commit:
9328eb6 androiddump: Register interfaces when list interfaces
A side effect of not implementing the option is that dumpcap is
then also called to try to retrieve interface capabilities
for all androiddump interfaces. As extcap interfaces are not
local network interfaces errors like these are logged
whenever the interface list is refreshed:
Capture Dbg sync_if_capabilities_open
Capture Info sync_pipe_run_command() starts
Capture Dbg argv[0]: /usr/local/bin/wireshark/dumpcap
Capture Dbg argv[1]: -i
Capture Dbg argv[2]: android-tcpdump-wlan0...
Capture Dbg argv[3]: -L
Capture Dbg argv[4]: -Z
Capture Dbg argv[5]: none
Capture Dbg sync_pipe_open_command
Capture Dbg read 25 ok indicator: E len: 333 msg: E
Capture Dbg sync_pipe_wait_for_child: wait till child closed
Capture Dbg sync_pipe_wait_for_child: capture child closed after 0.000s
Capture Info sync_pipe_run_command() ends, taking 0.012s, result=-1
Capture Msg Capture Interface Capabilities failed. Error -1, The
capabilities of the capture device "android-tcpdump-wlan0..."
could not be obtained (android-tcpdump-wlan0...:
SIOCETHTOOL(ETHTOOL_GET_TS_INFO) ioctl failed: No such device).
Please check to make sure you have sufficient permissions, and
that you have the proper interface or pipe specified. ()
To avoid error prints and to fulfil the documented equirements for extcap
tools register a fake interface with what would be the properties of such
an interface.
Change-Id: If174adbb64c66132be4225f854bbf9f66d2f5ed1
Reviewed-on: https://code.wireshark.org/review/23093
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The packet-per.c intialisation of ext_length is not really
needed - idx could be -1 with or without extension_flag
being set. But it'd be best not to have someone need to
think this through again.
Change-Id: If07f98ac7d7f2619149e35a2a0d75b765839a7ba
Reviewed-on: https://code.wireshark.org/review/23905
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
struct timeval is defined in <sys/time.h>, include it.
It should fix building with musl:
udpdump.c: In function 'setup_listener':
udpdump.c:126:9: error: variable 'timeout' has initializer but incomplete type
struct timeval timeout = { 1, 0 };
Change-Id: Id9be579e50ea2845ca609708e8ec4d1a3858ecc0
Reviewed-on: https://code.wireshark.org/review/23728
Petri-Dish: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
For a sane plugin build environment. Include config.h as the first
header in the .c file instead.
Fix by moving required compiler attribute macros to a new
"ws_attributes.h" API header.
Change-Id: I34f58a927f68c1a0e59686c14d214825149749e1
Reviewed-on: https://code.wireshark.org/review/23400
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Bug: 13847
Change-Id: I3a706db25204fe4c1fd1b7be3b17b8c55365dccf
Reviewed-on: https://code.wireshark.org/review/23169
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Some Android devices support 802.11 monitor mode and nlmon
interfaces. Add linktype defines to be able to capture frames
from such interfaces.
Change-Id: I8b8b444ac2821542fc946694b71c8d9fb7ba1238
Reviewed-on: https://code.wireshark.org/review/23080
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Recent changes had the bt snoop capturing function stop working for
Android API versions >= 21. One of the command strings used for
detecting btsnoop server socket interface got messed up when
refactoring code. Fix by using the correct command strings again.
Fixes: faf100ec ("androiddump: Introduce adb_connect_transport helper function")
Change-Id: Id645d24cfb0cb23f36484cfd6416768c89bce51b
Reviewed-on: https://code.wireshark.org/review/23106
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Let androiddump's internal definition of encap types directly
use linktype values from libpcap/wiretap. This way back and forth
conversion between internal and public values can be avoided.
Change-Id: I67522283cc3eb15cbdb1bfdd829bb1ff0031bb82
Reviewed-on: https://code.wireshark.org/review/23079
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This function is helpful to debug the interaction between the
calling UI and the extcap itself.
All extcaps have been changed accordingly.
Change-Id: I358caf4c50797501672bf77fdd91f7276897078c
Reviewed-on: https://code.wireshark.org/review/22806
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Some more repeated code patterns identified. Reduce code duplication
by adding some helper functions.
Change-Id: I0fecd511fd56049e9eae111cdad08252dffff6cb
Reviewed-on: https://code.wireshark.org/review/22480
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Fix a few cases where socket is not closed on failure path.
Change-Id: Id116a8e5f14979f962fdf725c62999758b79109e
Reviewed-on: https://code.wireshark.org/review/22481
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
If linktype cannot be determined from tcpdump output the
lookup function is handed a NULL which is then strcmp:ed.
Handle NULL parameter by explicit check.
Fixes Coverity CID 1413923
Change-Id: I290c116991d15cef0a1e954a9f8b76722a5f450c
Reviewed-on: https://code.wireshark.org/review/22483
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The regex matching for linktype might be performed multiple
times. Make sure string is freed before fetched again.
Change-Id: Ice7812ff4a3a8e6a1497ab2ef5aa94976502c16f
Reviewed-on: https://code.wireshark.org/review/22482
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
androiddump used to start tcpdump without specifying the interface
to capture packets on. This works when only one interface is up
but when multiple interfaces are up the output might be empty.
This change let tcpdump list all available network interfaces
and adds a unique extcap interface for each interface that is 'up'
on the device.
Change-Id: Icf0d7fa8f38320092579d4163dcdbcf2b687d8cc
Reviewed-on: https://code.wireshark.org/review/22402
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Instead of treating all output from Android tcpdump as Ethernet
data link type parse what tcpdump acually tells it to be.
This is needed as there are cases when the output is not Ethernet.
For example when starting packet capture on a device with multiple
interfaces up.
NOTE: As translation between tcpdump reported DLT and androiddump's
internal type was needed for now support is only added for types
used by network interfaces of tested devices (i.e. ETHERNET and
LINUX_SSL).
Change-Id: Ie3f9167176c336cb31f6e681f1daac6135a78883
Reviewed-on: https://code.wireshark.org/review/22401
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make the variable used for it an int; that's large enough, and, on
Windows, not so large that it provokes warnings.
Change-Id: I00600d816f69d79f7a42eb09b1290ff7708b0bfc
Reviewed-on: https://code.wireshark.org/review/22420
Reviewed-by: Guy Harris <guy@alum.mit.edu>
All strings sent to adb are prefixed with the length as a 4 byte
hex string. The length info prefix was manually hard coded into
strings. To avoid mistakes when updating code and to simplify
reading the source code instead let the various adb_send functions
calculate string lengths and generate the 4 byte hex string
prefixes.
Change-Id: I4178e9df5930a1c7904053e5a7750c943efddc84
Reviewed-on: https://code.wireshark.org/review/22399
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Same code pattern is used over and over when connecting to an adb
server. Introduce a helper function that perform the function of
connecting to specified adb server and transport.
Change-Id: Id2f72f1eb976fa0d742a6db1ef6d592264990ba1
Reviewed-on: https://code.wireshark.org/review/22398
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Comments in code claim:
"The data we are getting from the tcpdump stdoutput stream as the
stdout is the text stream it is convertinng the 0A=0D0A; So we
need to remove these extra character."
This is not true on non-Windows systems at least so avoid the filter
when not built for Windows.
NOTE: A problem with the filter is that it operates on all bytes
received on the socket, including packet data(!). Capturing
data with CR/LFs (for example an HTTP request) will fail. Ideally
the filter should be replaced with some other mechanism but as I
don't have a Windows system to verify that the comment claims are
valid, this change will at least make androiddump work on
non-Windows systems.
Bug: 13510
Change-Id: Ic00f44fa7516c0db7fc015ed8685deb365a347db
Reviewed-on: https://code.wireshark.org/review/22397
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
udpdump has local copies of the tag values from exported_pdu.h, so the
dependency isn't needed. exported_pdu.h required tv_buff.h and packet_info.h,
whose inclusion caused link errors on SPARC.
Bug: 13801
Change-Id: Icbf7b59b8af0d3a0fc73599baad6932e76dc3462
Reviewed-on: https://code.wireshark.org/review/22131
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Have a header file that defines HAVE_REMOTE if HAVE_PCAP_REMOTE is
defined, and then includes pcap.h. Replace all other includes of
pcap.h, and the definition of HAVE_REMOTE, with includes of that file.
Check for anything other than wspcap.h including pcap.h in checkAPIs.pl.
Change-Id: I3cbee8208944ad6f006f568b3fe3134e10b2a883
Reviewed-on: https://code.wireshark.org/review/21605
Reviewed-by: Guy Harris <guy@alum.mit.edu>
WinPcap made the mistake of having stuff in its public header fines
depend on a configuration #define, HAVE_REMOTE; this means that we need
to forcibly define it when building with remote capture support.
The tip of the libpcap master branch does not have that botch; hopefully
future versions of libpcap-for-Windows will be based on that libpcap and
thus lack that botch as well.
Defining HAVE_REMOTE in config.h is not the right fix, as it makes it
look like a *Wireshark* configuration option that code in Wireshark
should test, rather than a *WinPcap* configuration option that the
pcap.h that ships with the WinPcap SDK should have been changed, as part
of the build process, to correctly define or not, so that users of
WinPcap don't have to define it themselves.
Change-Id: I62d1eca6d3c900d0dcc9fbc011db77f595a86313
Reviewed-on: https://code.wireshark.org/review/21593
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I1d82c62dd30497db6a88ba3d3c973799ba7631ab
Reviewed-on: https://code.wireshark.org/review/20730
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
androiddump reads data from tcpdump in chunks that not necessarily
match packet sizes. Whenever a partly read packet is found in buffers
more data is read and the number of used bytes in buffer is updated.
The calculation of used_buffer_length is wrong though leading to most
packets are read and thrown away.
Problem fixed by correcting an operator precedence mistake where
used_buffer_length would only be increaded with 0 or 1 insted of
actual number of read bytes.
Change-Id: Ib5c4e1d96e7ba499f26796ffa5d7ce6a116b9a6e
Reviewed-on: https://code.wireshark.org/review/20666
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Logcat Text interfaces have now two new options:
1. Ignore log-buffer - this means you start capturing immediately
and there will no logs from buffer
2. Custom-options - pass command line parameters to logcat, like tags
For example:
adb logcat -v threadtime -b main #now custom parameters starts# -T 20 -s Ads Wireshark
Please note that some custom options are banned to avoid unexpected
behaviour (like "not working")
Change-Id: I015d1aeae35cfed712de59138288d82d3a491c38
Reviewed-on: https://code.wireshark.org/review/20358
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Ia88d00593163b1c1e9a0e120aeff5e36f0135474
Reviewed-on: https://code.wireshark.org/review/20319
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Architecture of androiddump based on "blocking" sockets,
however for start-up it is better to use non-bloking connect()
to avoid long waiting time then fail.
Change-Id: I2bb8ea51e24db4dd1f5a6b97e1d2bc0156342d97
Reviewed-on: https://code.wireshark.org/review/20293
Petri-Dish: Michal Labedzki <michal.tomasz.labedzki@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bug: 13104
Change-Id: I05248dad8e72272cf0933c766ec0bf5160075e1e
Reviewed-on: https://code.wireshark.org/review/20275
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Release as version 1.0.5:
All connects to ADB are now non-blocking.
Try to connect up to 10 times with 1ms delays,
so in worst-case it takes ~10ms (for example 14ms)
Bug: 13104
Change-Id: I791909c9c951b62195b48acd82490e1b9ebf2be0
Reviewed-on: https://code.wireshark.org/review/19968
Petri-Dish: Michal Labedzki <michal.tomasz.labedzki@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.tomasz.labedzki@gmail.com>
Tested-by: Michal Labedzki <michal.tomasz.labedzki@gmail.com>
The cleanup routine has been added to exit section of the applications.
Those which required a exit restyle have been patched as well.
Change-Id: I3a8787f0718ac7fef00dc58176869c7510fda7b1
Reviewed-on: https://code.wireshark.org/review/19949
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
That should squelch some warnings on Windows.
Change-Id: I55b394be12203e14af023fdcc5d46564d0fcfa34
Reviewed-on: https://code.wireshark.org/review/19797
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have a wsutil/socket.h file, for inclusion by everything that uses
sockets, that contains the UN*X-vs-Windows #includes and #defines to
hide some UN*X-sockets vs. Winsock API differences. That stuff mostly
comes from from extcap/extcap-base.h; have that file just include
wsutil/socket.h rather than defining that stuff itself.
Include it in sharkd_daemon.c. Use socklen_t for the size of things to
pass to bind() as the last argument; wsutil/socket.h defines it as int
on Windows.
Ignore sharkd in Git.
Change-Id: I3f2171b7aa613717f52305f62bfd7d43e0172dc6
Reviewed-on: https://code.wireshark.org/review/19796
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Basic installation of tcpdump (the default remote capture binary)
don't have setcap option. Give the user the option to run tcpdump
with sudo (already possible with a custom remote capture command).
Change-Id: I273798b5f7dc63b468b03eb633bfc60f53e30743
Reviewed-on: https://code.wireshark.org/review/19672
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Change-Id: If7c790c25ed24da1b1442ee86e3a2f75bd3f8856
Reviewed-on: https://code.wireshark.org/review/19658
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.tomasz.labedzki@gmail.com>
Tested-by: Michal Labedzki <michal.tomasz.labedzki@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Commit v2.1.0rc0-2181-ga4e2263ac4 introduced a helppage parameter, but
all callers were NULL. In a later change, callers would use the
data_file_url() function, but this needs to be freed, so do that.
Fixes: v2.3.0rc0-1825-ge5596b74bd ("extcap: set help page for all extcaps.")
Change-Id: I967c0f8c6b50d9e78ac227575de24a81f97d376a
Reviewed-on: https://code.wireshark.org/review/19570
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
struct timeval requires sys/time.h. Fixes the following musl libc build error:
androiddump.c: In function 'useSndTimeout':
androiddump.c:262:18: error: variable 'socket_timeout' has initializer but incomplete type
const struct timeval socket_timeout = {
^
Change-Id: I52e204f32a012aabea2e54877e564576c072fe08
Reviewed-on: https://code.wireshark.org/review/19460
Reviewed-by: Michal Labedzki <michal.tomasz.labedzki@gmail.com>
Petri-Dish: Michal Labedzki <michal.tomasz.labedzki@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Don't narrow values until it's necessary, and then put in explicit casts
to indicate that the narrowing is intentional.
Change-Id: I8afc2a457822febbed33cee573953993013a7185
Reviewed-on: https://code.wireshark.org/review/19423
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Export pdu routines have been rewritten here on purpose.
Change-Id: If4879de4c98b6f20a75df158cae0cf9a80ffae57
Reviewed-on: https://code.wireshark.org/review/19384
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
They've been set to the manpage of the local filesystem.
Ping-Bug: 13218
Change-Id: Iacd5d2ba7ae39ee1718b59747c245d1c07785e8f
Reviewed-on: https://code.wireshark.org/review/19179
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Now "ps" command does not support process name as parameter,
use grep instead.
Change-Id: I0c35bc7d560e237e4140000e67af097744cb2c1b
Reviewed-on: https://code.wireshark.org/review/19087
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Have programs that use libwiretap call that routine rather than
separately calling some or all of init_open_routines(),
wtap_register_plugin_types(), and wtap_opttypes_initialize().
Also don't have routines internal to libwiretap call those. Yes, this
means doing some initialization work when it isn't necessary, but
scattering on-demand calls throughout the code is a great way to forget
to make those calls.
Change-Id: I5828e1c5591c9d94fbb3eb0a0e54591e8fc61710
Reviewed-on: https://code.wireshark.org/review/19069
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This should avoid neverending or long time to obtain timeout
in some cases like firewall's drop rules, etc.
Bump version to 1.0.4
Bug: 13104
Ping-Bug: 13114
Change-Id: I9bef714b6d92b3516a2a95ebdbe1ba594fa60e34
Reviewed-on: https://code.wireshark.org/review/18728
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This allow to capture without any filter.
Bug: 13048
Change-Id: I29fb1a7367375b9f3d83a4f610789ae159735198
Reviewed-on: https://code.wireshark.org/review/18561
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Fix help output that describes interfaces provided by tool
to reflect reality - add missed DEVICE_ID that is part of interface.
Change-Id: Ib6374db28d8d4696ce27c5358da49d3ebfcf31e1
Reviewed-on: https://code.wireshark.org/review/18267
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Tested-by: Michael Mann <mmann78@netscape.net>
"--debug" and "--extcap-version" are part of extcap-base helper,
do not hide them.
Change-Id: I287b68dbed5344c188fede69d112ab007a6ee18b
Reviewed-on: https://code.wireshark.org/review/18279
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
This new option adds the chance to use a custom capture command.
It must produce a PCAP stream that will be read by Wireshark,
written to STDOUT.
Change-Id: I34a72465eb369194f24ecf0594df143b8ad6555f
Reviewed-on: https://code.wireshark.org/review/18037
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
This removes the option to specify a custom capture binary due to
incompatibilities between different binaries options. A following
change will add the chance to use a custom capture command that
will cover all the cases that the default doesn't.
Bug: 12952
Change-Id: Idbde3e27f34c28f4ce622c3a860994e25ce5f92f
Reviewed-on: https://code.wireshark.org/review/18040
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Using %lu for ssize_t throws an error. This commit change it to %zd.
Change-Id: I19ae72fe0836424bcb93e912e9b1757df4ae5fb1
Reviewed-on: https://code.wireshark.org/review/17900
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Use size_t for sizes. Do checks to make sure we don't overflow ints.
Change-Id: Id0846cc5c6348d67a23064517ad1c432cf1cb61a
Reviewed-on: https://code.wireshark.org/review/17742
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make the reply length unsigned - there's no reason for it to be signed.
Change-Id: I5f4d1f027eeddee939547c052220efb89800f4b1
Reviewed-on: https://code.wireshark.org/review/17740
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Udpdump is a generic UDP receiver that exports datagram in PCAP format.
Change-Id: I52620a92b12530b6f9b5449c43e692663acdfc14
Reviewed-on: https://code.wireshark.org/review/17195
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Most of the actions (e.g. `androiddump --extcap-interfaces`) return
immediately without cleaning up. Fix this by adding a common exit path.
Change-Id: If02b18da49d866fb5525306e52fbf4590d98ecd2
Reviewed-on: https://code.wireshark.org/review/17634
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Change-Id: I51769e2427b0119aefe57ebcc08406434ffbfead
Reviewed-on: https://code.wireshark.org/review/16918
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This prevents the user to run
extcap_base_set_util_info(extcap, "1", NULL, "0", NULL);
that would result in version = 1.0.
Change-Id: I67532459c852bdceb16693553e90da88a1043435
Reviewed-on: https://code.wireshark.org/review/16858
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Change-Id: Ic8e9634c9568d32fdeca8cc84a9c2f5b9757a5ae
Reviewed-on: https://code.wireshark.org/review/16806
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
ws_close just calls _close(); that doesn't close sockets. closesocket()
is the API to close a socket on Windows, and is defined as close()
on UN*X, so using closesocket() will close sockets on Windows and UN*X.
This way, we close the pipe socket correctly on Windows.
Change-Id: I6d50e26bfabac5618c74a180cbe94d444b591bd4
Reviewed-on: https://code.wireshark.org/review/16582
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I5669e2442582f899643fae4a9f86ab6d505dde07
Reviewed-on: https://code.wireshark.org/review/16505
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
1. Check sscanf return value
2. Take large "packet" byte array off of stack and onto heap.
Change-Id: I8ade76359f1b0739ec31d7f3b688d212f21357ba
Reviewed-on: https://code.wireshark.org/review/16498
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
1. Take large "packet" byte arrays off of stack and onto heap.
2. Cast away an shift operation that should have been identified as safe anyway.
Change-Id: I159c4a7452744763f667336cf4824d5ac3472343
Reviewed-on: https://code.wireshark.org/review/16500
Reviewed-by: Michael Mann <mmann78@netscape.net>
This is for appeasing VS Code Analysis.
Change-Id: Ib7b3d8a3025dd764da283335051d0f77b45f6dee
Reviewed-on: https://code.wireshark.org/review/16499
Reviewed-by: Michael Mann <mmann78@netscape.net>
VS Code analysis considers them hardcoded values so the if statement is either
always true or always false.
Change-Id: Iad04add9391c515873e2e00d2c6cbd682fbf5b3f
Reviewed-on: https://code.wireshark.org/review/16419
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Now that nmake build system has been removed they are not needed anymore.
Change-Id: I88075f955bb4349185859c1af4be22e53de5850f
Reviewed-on: https://code.wireshark.org/review/16050
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
extcap_base_register_interface duplicates the memory, so there is no
need to keep it around.
Change-Id: I2bac8be519b659504c512d4eb29be8f7ef6dbd59
Reviewed-on: https://code.wireshark.org/review/15919
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Done for performance improvements.
This could probably be done in checkAPIs.pl, but this was just
a quick manual check with grepping.
Change-Id: I91ff102cb528bb00fa2f65489de53890e7e46f2d
Reviewed-on: https://code.wireshark.org/review/15751
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
This can speed up searching for interface specified to model of Android
device - in most cases it is its market name.
Change-Id: Ib5a3b96d9a2a8cf325f62614d395508b4ec58199
Reviewed-on: https://code.wireshark.org/review/15454
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use libSSH 0.7.2 compiled with MinGW(32|64) and linked with zlib and gcrypt support
Change-Id: I7c17d1ba3dd1890e2f83c119f5ea851834807e43
Reviewed-on: https://code.wireshark.org/review/12117
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
There is 68 generic error exit codes + 45 specific error codes.
Total: 113 error codes, so it is possible to have all specific
exit codes in future - max is 254 (UNIX limitation).
Change-Id: I798bf77b03031a701e90272d01e90b04e7e31940
Reviewed-on: https://code.wireshark.org/review/14763
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If extcap tool run on not existing interfaces it will fail.
There is no need to register ALL interfaces while only one is
needed. Extcap tool check it in other way (aka try to capture
but cannot for some reasons).
Change-Id: I6d60da97ce4175f19656d8c18ad8cacd25b0e99a
Reviewed-on: https://code.wireshark.org/review/14765
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Fixes a NULL-deref when no interface addresses are discovered.
Remove NULL interface from list (an empty GSList is represented by NULL
while g_slist_alloc returns a list with a single NULL data).
Change-Id: I2eded40bb697e051445a526d1f34d8a50ef9ccd4
Reviewed-on: https://code.wireshark.org/review/14888
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Wiretap require registration right now. Do it.
Change-Id: I7ec4c4a4c6d3fa6625fff970f7f39f1ab74e3ef5
Reviewed-on: https://code.wireshark.org/review/14761
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Trying to find interfaces every androiddump run use
a lot of system resources so Wireshark can hang for a while.
Back to old behaviour and register interfaces only when
list them.
Change-Id: Ib63cad05fb47722d3b9de24abf28a86e614417cd
Reviewed-on: https://code.wireshark.org/review/14764
Reviewed-by: Michael Mann <mmann78@netscape.net>
Fix mismatching emacs and vi modelines.
Change-Id: I5cab8c5b7692746a5fa731c977cef903ad19a6f6
Reviewed-on: https://code.wireshark.org/review/14688
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Fix a bunch of memory leaks, mainly because extcap_base_cleanup is not
called on most execution paths and because memory allocated for options
were not freed.
Additionally, randpkt will now fail if no option is given (it previously
returned 0 if --capture was missing). Logic using "goto" is introduced
with the idea that a program should fail (ret = EXIT_FAILURE) unless
proven otherwise.
Now none of the extcap programs are leaking:
for what in ssh cisco; do
for arg in '' --help --extcap-interfaces --extcap-interface=$what; do
extcap/${what}dump $arg; done; done
./tshark -D
Change-Id: I6df1027ed0c32bd53fe87e6c54d355bc8ddd01f5
Reviewed-on: https://code.wireshark.org/review/14671
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Add SOCKET_LIBS and NSL_LIBS to global LIBS variables on platforms
where it is required.
Make configure checks for getaddrinfo/gethostname unconditional,
that is handled with #ifdefs if necessary.
Change-Id: Ia874038454fb9cf3bdbf8e6fd829f319e331837e
Reviewed-on: https://code.wireshark.org/review/14560
Reviewed-by: João Valverde <j@v6e.pt>
That should squelch some warnings from the compiler on the OS X
buildbot.
Change-Id: I0da16469fb48e26677c5366d6fe290db2bf52a10
Reviewed-on: https://code.wireshark.org/review/14619
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Ciscodump is a new extcap that allows packet capture
on Cisco routers (IOS 12.4 and later) through SSH.
Change-Id: Ic9c5be01d3bd0112116f7fc9fa10e26c1552b007
Reviewed-on: https://code.wireshark.org/review/13886
Reviewed-by: Roland Knall <rknall@gmail.com>
Add pkg-config 0.29.1 macros to our distribution. This makes the
aclocal-flags script obsolete, since we are already not using GLib
autoconf macros.
ACLOCAL_AMFLAGS need only be defined on the top-level Makefile.am.
Change-Id: Idd868dcfeb8f279517970d0f96d9d53e3a7e4d5c
Reviewed-on: https://code.wireshark.org/review/14568
Reviewed-by: João Valverde <j@v6e.pt>
To comply with the procedure in README.developer.
Change-Id: If68da7b5ff27c3b250200cd17c80a005d51c631d
Reviewed-on: https://code.wireshark.org/review/14573
Reviewed-by: João Valverde <j@v6e.pt>
When no interfaces are available (as with androiddump when adb
is not running) version is not printed anymore, for a cleaner
output.
Change-Id: Ia150a58ff1c04e412ff29a540f18e1fe9612f633
Reviewed-on: https://code.wireshark.org/review/14289
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
recv() can return negative value or 0 in "error cases".
There is need to check it. This also solved empty interfaces
list if there is unauthenticated device.
Bug: 12080
Change-Id: If6cd0e0933b64e9ac9bbb66b3b8138f7177451d1
Reviewed-on: https://code.wireshark.org/review/14316
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
To quote Icf0831717de10fc615971fa1cf75af2f1ea2d03d:
HT tab stops are set every 8 spaces on UN*X; UN*X tools that treat an HT
character as tabbing to 4-space tab stops, or that even are configurable
but *default* to 4-space tab stops (I'm looking at *you*, Xcode!) are
broken. tab-width: 4, tabstop=4, and tabSize=4 are errors if you ever
expect anybody to look at your file with a UN*X tool, and every text
file will probably be looked at by a UN*X tool at some point, so Don't
Do That.
Adjust indentation to reflect the mode lines.
Change-Id: Ic829541c696e0ddbc45cc109009319859c799066
Reviewed-on: https://code.wireshark.org/review/14340
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
This error occurs every run of wireshark if adb is not running.
This is a bit noisy, so androiddump is made less verbose.
Bug: 12185
Change-Id: Ia7d0b0aba95e90a7f602c2e340f6344d09205b32
Reviewed-on: https://code.wireshark.org/review/14288
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
This new function abstracts the creation of a list of the local
interfaces that will be used by future extcaps to generate specific
filters. Sshdump now uses it to create a pcap filter.
Change-Id: I5b75a266f81104b3c9bcb3e51de246b7cc8785ce
Reviewed-on: https://code.wireshark.org/review/14092
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Also add the extcap-version parameter to enable parsing of
version and helppage separately
Change-Id: I35ba5aa992940ffbb0cd9ebea8b7c3a1e8629d74
Reviewed-on: https://code.wireshark.org/review/14094
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
HT tab stops are set every 8 spaces on UN*X; UN*X tools that treat an HT
character as tabbing to 4-space tab stops, or that even are configurable
but *default* to 4-space tab stops (I'm looking at *you*, Xcode!) are
broken. tab-width: 4, tabstop=4, and tabSize=4 are errors if you ever
expect anybody to look at your file with a UN*X tool, and every text
file will probably be looked at by a UN*X tool at some point, so Don't
Do That.
Adjust indentation to reflect the mode lines.
Change-Id: Icf0831717de10fc615971fa1cf75af2f1ea2d03d
Reviewed-on: https://code.wireshark.org/review/14150
Reviewed-by: Guy Harris <guy@alum.mit.edu>
(Is there some reason why automake doesn't make this happen by default?)
Change-Id: I1a4fff32696012d0fd83faf86a2f40df4ea5fa80
Reviewed-on: https://code.wireshark.org/review/14085
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Remove mostly obsolete aclocal macros. Make GTK build flags a strict superset
of GLib flags. Use GTK build variables for GTK GUI and GLib elsewhere. Add
dependency flags explicitly instead of using WS_CPPFLAGS.
Some minor improvements and fixes for missing/unnecessary variables (no impact
on our test builds).
Change-Id: I3e1f067a875f79d6516c1fa7af986f17a7a6b671
Reviewed-on: https://code.wireshark.org/review/14005
Reviewed-by: João Valverde <j@v6e.pt>
If you include something from the wiretap directory, always precede it
with wiretap/.
Fix some includes of files in the top-level directory to use a path
relative to the current directory, not relative to the wiretap
directory.
This makes it a bit clearer what's being included.
Change-Id: Ib99655a13c6006cf6c3112e9d4db6f47df9aff54
Reviewed-on: https://code.wireshark.org/review/13990
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That lets the version of Wireshark built with autotools find the extcap
programs.
Don't install the extcap programs under ${datadir} - that puts it under
a share directory, and share directories are for platform-independent
files, which executable images aren't (they're instruction-set
dependent, hence platform-dependent).
Change-Id: I992eeb984bdbe6b3476777f7114628c83df6080f
Reviewed-on: https://code.wireshark.org/review/13943
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Found by clang. Compiler warning:
warning: format specifies type 'void *' but the argument has type 'char *' [-Wformat-pedantic]
Change-Id: I7f370b06f98490cd6e363a9679a449420c8c8021
Reviewed-on: https://code.wireshark.org/review/13602
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Copy pointer is enough.
Change-Id: I51188a8434f6e4ba1d9bf3456bd29e027dd40f35
Reviewed-on: https://code.wireshark.org/review/13393
Reviewed-by: Michael Mann <mmann78@netscape.net>
This allows an option to be masked (like a password), by using
the argument-type password.
Change-Id: I2eae1be2e6672bff28ba5f749d7a3f687ebd4631
Reviewed-on: https://code.wireshark.org/review/13385
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Add a version to each utility, displayed in the about dialog of Wireshark
Change-Id: I64936072b13116b3e173c50411e9fff45d5fbf4c
Reviewed-on: https://code.wireshark.org/review/13290
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I8512cfa1d424f82a873a0e0e1d22c7b075fdd7f3
Reviewed-on: https://code.wireshark.org/review/13069
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
An option may now use the "required=true" argument (see sshdump.c)
which will ensure, that the capture can only be started via the
dialog, if the option has been provided. To ensure, that this is
working properly, multiselect has been moved to a separate source
file.
Renamed one method so it may not interfere with a future save
functionality, and cleaned up the interface to use only default
buttons and roles
ONLY the Qt interface is being supported.
Change-Id: Ie1c9a63c1bba2e557d55b1de6f4775d8b9fce515
Reviewed-on: https://code.wireshark.org/review/12912
Reviewed-by: Roland Knall <rknall@gmail.com>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This new extcap is for testing and educational purpose.
It relies on rankpkt-core functions to generate random packets.
Change-Id: If6890f0673545682995a2079458108edc0913b30
Reviewed-on: https://code.wireshark.org/review/11764
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 626
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 661
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 678
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 689
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 700
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 711
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 728
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 739
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 750
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 761
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 810
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 867
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 889
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 949
V814 Decreased performance. The 'strlen' function was called multiple times inside the body of a loop. androiddump.c 971
V804 Decreased performance. The 'strlen' function is called twice in the specified expression to calculate length of the same string. androiddump.c 1876
V512 A call of the 'memcpy' function will lead to underflow of the buffer 'packet + exported_pdu_headers_size'. androiddump.c 1950
V804 Decreased performance. The 'strlen' function is called twice in the specified expression to calculate length of the same string. androiddump.c 2053
V804 Decreased performance. The 'strlen' function is called twice in the specified expression to calculate length of the same string. androiddump.c 2056
V512 A call of the 'memcpy' function will lead to underflow of the buffer 'packet + exported_pdu_headers_size'. androiddump.c 2122
V590 Consider inspecting this expression. The expression is excessive or contains a misprint. androiddump.c 2207
V590 Consider inspecting this expression. The expression is excessive or contains a misprint. androiddump.c 2227
V530 The return value of function 'freopen' is required to be utilized. androiddump.c 2275
V530 The return value of function 'freopen' is required to be utilized. androiddump.c 2279
V808 'name' object of 'QString' type was created but was not utilized. bluetooth_devices_dialog.cpp 201
V807 Decreased performance. Consider creating a pointer to avoid using the 'ui->tableTreeWidget->headerItem()' expression repeatedly. bluetooth_devices_dialog.cpp 337
V807 Decreased performance. Consider creating a pointer to avoid using the 'item->child(i_item)' expression repeatedly. bluetooth_hci_summary_dialog.cpp 648
V807 Decreased performance. Consider creating a pointer to avoid using the 'ui->tableTreeWidget->headerItem()' expression repeatedly. bluetooth_hci_summary_dialog.cpp 669
Change-Id: Ia81b5f867b2b1e0ee58eed0bd297800774bc37f9
Reviewed-on: https://code.wireshark.org/review/12683
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Removing all malloc improve reliability, simplify code,
reduces memory usage...
Bug: 11608
Change-Id: Ie56312a1afdf298e926bb242825565b52dbd85d3
Reviewed-on: https://code.wireshark.org/review/12682
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
As explained in https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6695#c2
g_frpintf unfortunately crashed on Windows. Let's go back to fprintf instead.
It will create warnings with MSVC2015 but we do not use it officially yet and
at least androiddump will be working correctly again.
Change-Id: Idfdb608576e18af63650af80e01bcda36dd81ac4
Reviewed-on: https://code.wireshark.org/review/12435
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
In real it is a fix, because the only change is new name of
process of the same application on Android.
Change-Id: I69d1362e9f11967ec1127ff89c7b45299d291fe8
Reviewed-on: https://code.wireshark.org/review/11984
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
sshdump is an extcap module that allows dumping from a remote host using an ssh connection.
It goes with the existing extcap plugin interface.
Change-Id: I8987614fdd817b8173a50130812bc643a4833bca
Reviewed-on: https://code.wireshark.org/review/11402
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Added the option --extcap-capture-filter to extcap to send the capture filter
from the main screen to the extcap binary.
Change-Id: I75f0d7dbec810551225377f9221053298488cdd5
Reviewed-on: https://code.wireshark.org/review/11423
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Added the wifi capturing feature in the Androiddump.
Wifi packet capturing is done by making use of tcpdump in android devices.
Android wifi will appear as a capture interface in the interface window.
This will be an added support for android devices for device network bandwidth analysis.
Change-Id: I71d24ae5d1764d3ee7e50f09cd0b530ee9654844
Reviewed-on: https://code.wireshark.org/review/10414
Reviewed-by: ronnie sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
I guess using glib's gssize instead of ssize_t should be enough for:
extcap/androiddump.c(736): error C2220: warning treated as error - no 'object' f
ile generated
extcap/androiddump.c(736): warning C4477: 'fprintf' : format string '%I64i' requ
ires an argument of type '__int64', but variadic argument 3 has type 'ssize_t'
extcap/androiddump.c(736): note: to simplify migration, consider the temporary
use of /Wv:18 flag with the version of the compiler with which you used to
build without warnings
extcap/androiddump.c(736): note: consider using '%i' in the format string
extcap/androiddump.c(736): note: consider using '%I32i' in the format string
Change-Id: I1030694aed61d413be1aad54531f99db45e99c9d
Reviewed-on: https://code.wireshark.org/review/9876
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
unsigned type is required in call to 'printf'.
Change-Id: I3076454502e1c98ac225d33d520be5bbe5172c2a
Reviewed-on: https://code.wireshark.org/review/9451
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Try to fix Coverity issues in Bluetooth HCI and androiddump.
Change-Id: Id2ed35130eb4dbb0698b7a54afccdba56af62bfd
Reviewed-on: https://code.wireshark.org/review/8983
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Be careful when use char buffer [aka signed char] with arithmetic and thinking
in unsigned logic. Also add missing rules for SCO.
Change-Id: I3fbb0407c74215719103e08344be8f673a7deedf
Reviewed-on: https://code.wireshark.org/review/8895
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
If verbose mode is off, then androiddump is quite.
Change-Id: Ib0b2d10acf05487a971e2bf7cbc27fd2666ec262
Reviewed-on: https://code.wireshark.org/review/8516
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Change boolean options to accept lower- and uppercase TRUE as
positive result
Change-Id: I858918f7591bb7daf94444fb6c82f9aa37168d01
Reviewed-on: https://code.wireshark.org/review/8283
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Value from strtol is not needed in this case, but compiler
complains about it, so check if value range is valid and other
possible error that can be detected.
Change-Id: I6a8eeb6d2cb62c155772201000eca4c16bc8a555
Reviewed-on: https://code.wireshark.org/review/8172
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
It does not work as expected.
Change-Id: Ibbfce9fdbb3e1aae747101a576fbe32c979b42c9
Reviewed-on: https://code.wireshark.org/review/8033
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Add missing androiddump stuff like:
- release notes
- documentation
- Windows nmake support
- running androiddump as a windows application instead of console on Windows
- addition of androiddump to the Windows installer
Change-Id: I3bc6cc70e4dc96c0cd776f3d965dd2aa0309995d
Reviewed-on: https://code.wireshark.org/review/7981
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
That's how we do it elsewhere.
Change-Id: Icd44d8bdec2425b58a4479cd60f08788c85c4d71
Reviewed-on: https://code.wireshark.org/review/8023
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make exported_pdu_headers_size a size_t to make it big enough. Make
used_buffer_length a size_t as it doesn't go negative and gets compared
with unsigned values. Cast length to size_t when comparing it with
used_buffer_length - by that time, we've ensured that it's not negative.
Change-Id: Ie192eee55914ebe548865d46575768964353ea2d
Reviewed-on: https://code.wireshark.org/review/8021
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Don't assume "UL" is good enough; long is 32 bits on ILP32 platforms.
Change-Id: If235e2e49afcbfff7d5289cafe24cf5cc01358e4
Reviewed-on: https://code.wireshark.org/review/8019
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Cast some sizeofs, make a variable size_t.
Change-Id: I439a9f2a584535597e6ac92ccdf243ae07e870b3
Reviewed-on: https://code.wireshark.org/review/8018
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Either it's Windows and not Cygwin (__WIN32 suffices for both 32-bit and
64-bit Windows, and this code is unlikely to work on 16-bit Windows, not
that much of anybody cares about it any more), or it's UN*X or Windows-
pretending-to-be-UN*X-with-Cygwin. That way we don't have to pile on
new defined(XXX)'s for every UN*X out there.
Change-Id: Ia1df3378a88f2cf8bd1cc8f1a74b51adfe668370
Reviewed-on: https://code.wireshark.org/review/8016
Reviewed-by: Guy Harris <guy@alum.mit.edu>
GINT32_FROM_BE() and GINT32_TO_BE() both declare local variables, and
they collide, so warnings are issued if you use them both in the same
statement.
Change-Id: I87df6cf7f180316692ab5164e25263ff28d5d760
Reviewed-on: https://code.wireshark.org/review/8015
Reviewed-by: Guy Harris <guy@alum.mit.edu>
By remove duplicate code...
Change-Id: I247c64864c112b08e912d4738478a22e65470eb4
Reviewed-on: https://code.wireshark.org/review/7988
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Ib244ec9a94d99a3589d411a4e3bcb1b03212b82e
Reviewed-on: https://code.wireshark.org/review/7987
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Remove malloc
Change-Id: I12a7f76026336853a50bc5277404c44aa715b8d2
Reviewed-on: https://code.wireshark.org/review/7986
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add sys/socket.h as well as arpa/inet.h and the definition
of closesocket.
Change-Id: I3986a1cd019c40e7c27cecb3752fd8b7374de6da
Reviewed-on: https://code.wireshark.org/review/7980
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
androiddump is extcap program that can be used with Android devices
(need Android SDK in system PATH). Supported is Logcat/Logger logs and
Bluetooth interfaces for all Android to this day (Lollipop).
Please note that it will work also for FirefoxOS.
Interfaces:
1. Logcat Main (binary or text)
2. Logcat System (binary or text)
3. Logcat Events (binary or text)
4. Logcat Radio (binary or text)
5. Logcat Crash (text; Lollipop)
6. Bluetooth Hcidump (<Kitkat)
7. Bluetooth Bluedroid External Parser (Kitkat)
8. Bluetooth BtsnoopNet (Lollipop)
Change-Id: I26e4cd1a37a6af805f8b932399b4aa44ee7b5a80
Reviewed-on: https://code.wireshark.org/review/7475
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Florian Bezold