From Tom Cook and Tom Alexander.
1. A VWR encapsulation that reads VeriWave capture files (*.vwr)
generated from
WaveTest test hardware
2. Dissectors that display the VeriWave tap headers (both 802.11 and
Ethernet)
3. A dissector for the WaveAgent protocol. The WaveAgent dissector is
heuristic and parses the WaveAgent packet (a UDP payload).
The WaveAgent dissector has been Fuzz tested.
The VWR ENCAP and dissectors have been used extensively by VeriWave
customers in a special version of WireSark compiled by VeriWave.
svn path=/trunk/; revision=42155
Here is a dissector for ActiveMQ OpenWire protocol.
A few words about the protocol :
OpenWire has two wire formats :
- "loose" : more verbose, less CPU-intensive, less network-intensive (1-pass)
- "tight" : more compact, more CPU-intensive, more network-intensive (2-pass)
This dissector only supports the "loose" syntax, which is not the default.
This dissector only supports version 6 of the protocol.
It can be changed on the broker in the activemq.xml file by specifying
"tightEncodingEnabled=false" :
svn path=/trunk/; revision=41919
This patch adds support for the DVB Bouquet Association Table (BAT) from ETSI
EN 300 468.
With this last patch, the support for the DVB SI table is quite complete.
svn path=/trunk/; revision=41836
This patch adds support for the DVB Time Offset Table and the related
descriptor.
It also contains the Stuffing Descriptor as an added bonus.
svn path=/trunk/; revision=41766
This patch adds support for DVB Network Information Table as documented in
ETSI EN 300 468.
The patch also contains additional mpeg descriptors usually found in NIT plus
a few minor bugfix for other descriptors.
svn path=/trunk/; revision=41754
I'm contributing a new dissector for the HART/IP protocol. This
protocol is specified by the HART Conformance Foundation (HCF). It is
a standard protocol used in the process control industry. It
essential wraps the multip-drop serial HART packets in TCP or UDP
packets. The standard has been approved by the HCF and has been
assigned UDP/TCP port 5094 by IANA.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6961
--This line, and those below,
will be ignored--
M AUTHORS
M epan/CMakeLists.txt
M epan/dissectors/Makefile.common
AM epan/dissectors/packet-hartip.c
M ui/gtk/main_menubar.c
svn path=/trunk/; revision=41644
Support for DCCP Simultaneous-Open for NAT Traversal, RFC 5596. A new packet
format is supported. I did a little code cleanup too.
svn path=/trunk/; revision=41543
Move Y.1711 out of MPLS dissector
ITU-T Y.1711 code was "embedded" into the MPLS dissector in 2006.
This patch moves it into its own dissector.
From me :
Fix a Clang warning
svn path=/trunk/; revision=41486
A new dissector for IEEE 1722.1.
From me: some code cleanup, including:
- Get rid of some unnecessary local variable initializations.
- Put all of 1722.1 under one subtree.
- Just put if(tree)s in the top-level function rather than scattered throughout.
- Remove a couple "set but not used" warnings (a couple are #if'd out).
- Don't use deprecated functions.
svn path=/trunk/; revision=41282
Support for MPLS Packet Loss and Delay Measurement, RFC 6374
Support for MPLS Packet Loss and Delay Measurement, RFC 6374.
Any packetformat is supported: DLM, ILM, DM, DLM+DM and ILM+DM.
From me :
* Prefer proto_tree_add_item when it is possible
* add Modelines information
svn path=/trunk/; revision=41260
Dissector for Alcatel-Lucent Enterprise Universal Alcatel- and NOE protocol
families.
Meant as a replacement for existing UA-dissector in trunk because of better
feature set:
- latest protocol specifiaction
- more detailed dissection and filtering possibilities on subprotocols
- RTP stream setup
- NOE over SIP
Lars Ruoff
On behalf of Alcatel-Lucent Enterprise
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6844
svn path=/trunk/; revision=41134
Enable decryption of TLS 1.2.
Add some cipher suites from RFC5246 and RFC5289.
Fixed a bug in the handling of stream cipher.
(The explicit IV field in the application record doesn't exist when stream ciphers are used. But the original code handles it as if one-byte IV exists.)
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6688
svn path=/trunk/; revision=40273
- ... and make that distinction configurable for capture files that do not have padding in small frames, but do have trailers
- Add VSS-Monitoring dissector to show by the TAP inserted time- and portstamps
svn path=/trunk/; revision=40108
This patch covers following -
i) Support for detecting OSPFv2 Opaque RI LSA. (RFC4970)
ii) Support for detecting OSPFv2 RI Capabilities TLV (RFC4970)
iii) Support for detecting OSPF Dynamic Hostname TLV (RFC5642)
iv) As per RFC4970, support for detecting RI LSA for OSPFv3 as well.
svn path=/trunk/; revision=40073
- Removed some mpls preferences which are no longer relevant/needed like
decode PWAC payloads as PPP traffic and assume all channel types except 0x21
are raw BFD.
- MPLS extension from PW-ACH to MPLS Generic Associated Channel as per RFC 5586
- Updated Pseudowire Associated Channel Types as per
http://www.iana.org/assignments/pwe3-parameters
- Updated the VCCV bitmaps as per RFC 5885
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6574
svn path=/trunk/; revision=40026
kNet (KristalliNet) dissector for Wireshark
kNet is a connection-oriented network protocol for transmitting arbitrary application-specific messages between network hosts. It is designed primarily for applications that require a method for rapid space-efficient real-time communication. kNet is an application-level protocol which can be ran either over UDP, TCP or SCTP transports.
From me :
* Add Modelines information and fix trailing whitespace
* Merge packet-knet.h in packet-knet.c
* Make Checkhf happy
* Fix Clang/GCC Warning about unused variable
* Add Authors info & CMakeList.txt
svn path=/trunk/; revision=40010
Enhance XMPP Dissector
XMPP is communication protocol that is based on XML.
Existing Jabber dissector has only few filtering possibilities and displays packets in inconvenient way.
This dissector is a result of cooperation with Jitsi community as Google Summer of Code project (http://www.jitsi.org/index.php/GSOC2011/XmppWireshark).
From me :
Add Mariusz Okrój in AUTHORS File
Add Modelines information
svn path=/trunk/; revision=39799
Dissector for HSR and PRP-1
Here is a patch that adds a dissector for HSR and for PRP-1. Both protocols are defined in IEC62439 Part 3. (High-availability Seamless Redundancy / Parallel Redundancy Protocol)
The existing PRP dissector has been refactored to support both the old PRP (now called PRP-0) and the new PRP-1.
There are three distinct dissectors:
- HSR (ethertype 892F)
- HSR/PRP supervision (ethertype 88FB)
- PRP-0 and PRP-1 (trailer dissector; disabled by default)
From me :
* Fix Clang Warning
* Add modification for CMakeLists.txt
svn path=/trunk/; revision=39692
dissector for HDCP (High bandwidth Digital Content Protection)
HDCP can run on top of TCP, there's no fixed port number assigned. I created a heuristic dissector that's disabled by default and can be enabled by setting a preference (similar to the hilscher dissector). The idea behind this is that some HDCP messages are hard to recognize (e.g. one byte message id + 8 random bytes). Having the dissector enabled at all times may generate false positives.
svn path=/trunk/; revision=39480
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5929
From me:
packet-cipmotion.c:
FT_BOOLEAN fields with bitmasks need a bit-fieldwidth in the hf[] entry 'display' field;
Define attribute_size as guint32 since it has to store guint8*guint16;
Use ENC_NA as encoding arg in proto_tree_add_item() for FT_BYTES field types;
Remove trailing whitespace from lines;
Other minor cleanup and reformatting.
packet-enip.c:
Use ENC_NA as encoding arg in proto_tree_add_item() for FT_BYTES field types;
svn path=/trunk/; revision=39396
Re-write of the EIGRP dissector to support Multi-Protocol (TLV 2.0) and
Multi-Topology (TLV 3.0). This version also support Service Advertisement
Framework(SAF) extensions to EIGRP
Dissector includes:
- Dissection of all EIGRP Opcodes and TLVs
- Decode of EIGRP Flags and bitfields
- Decode of EIGRP Communities
- Decode of latest EIGRP "wide metric" formats
- Decode of EIGRP Extended Metrics
- Decode of SAF packets with XML client data handed off to XML dissector
From me:
Fix checkapi errors/warnings use G_GINT64_CONSTANT and G_GINT64_MODIFIER
svn path=/trunk/; revision=39339
Update 802.11s packet dissecting to the ratified standard (v12.0)
[PATCH 8/9] add support for Root Announcement (RANN) IEs
svn path=/trunk/; revision=38281
Vuze, called Azureus before, is a great BT client and has a lot of users,
while its DHT implementation is different from the official one.
From me: New-style dissectors are supposed to to always return
"bytes dissected" (not just when tree != NULL);
svn path=/trunk/; revision=37755
Attached is a dissector for CN/IP protocol described in EIA-852. It is mainly
used to encapsulate and send Lontalk (EIA-709.1) or EIA-600 frames over UDP (or
TCP).
This dissector can only decode the common header and data frames can be decoded
by further dissectors.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5907
svn path=/trunk/; revision=37596
The two patches attached allow the dissection of the Homeplug AV Ethernet MAC
management frames between a controlling device and a Homeplug AV Ethernet to
PLC adapter. This protocol is pretty similar to the previous generation
Homeplug protocol (dissected by packet-homeplug.c) but a couple of noticeable
differences make it require its own dissector handler.
This dissector is based on the work done by Nicolas Thill, Xavier Carcelle and
myself in the Faifa project (https://dev.open-plc.org).
The dissector handles the standard Homeplug AV Ethernet MAC management frames
(called public) as well as the Intellon specific management frames (vendor).
From me:
Remove unnecessary global variables.
Add to COL_INFO even when !tree.
Remove gotos.
Remove unnecessary includes.
svn path=/trunk/; revision=37403
* Remove proto_tree_add_eui64 function from 802.15.4 Dissector
* Replace print_eui64/print_eui64 by eui64_to_str/get_eui64_name
* Update Documentation (README.dev)
* Add new function in libwireshark.def
* Support of encoding for tvb_eui64_to_str
* Use FT_EUI64 for ICMPv6, CAPWAP, Zbee ... dissector
svn path=/trunk/; revision=37015
This patch incorporates the following fixes from the patch attached to
bug 5671 with changes as noted below:
1.) Files where the packet header and packet data are noncontiguous are
handled improperly, resulting in read misalignment and ultimately the
error message, "Observer: bad record: Invalid magic number 0xXXXXXXXX."
This bug is caused by not obeying the packet_entry_header.offset_to_frame
field.
2.) Daylight savings time is not properly accounted for in files using
local time encoding.
3.) As of Observer/GigaStor v13.10 (bug 5671 incorrectly stated v14),
timestamps in the file format changed from local time encoding to GMT
encoding. Wiretap has been changed to support reading both formats.
Patch submitted with bug 5671 added a separate file type to allow
writing local format. This patch does not add the separate file type
and always writes GMT.
4.) The wtap_dumper.bytes_dumped field is not being properly incremented
as data is written to files.
This patch also incorporates the following additional enhancements /
fixes not in bug 5671:
1.) Support for reading BFR files which contain Fibre Channel captures.
Test file Fibre_Channel_Capture.bfr attached.
2.) Support for modified file header used in upcoming v15. New header
file format takes an unused byte from the version string to allow for a
larger offset to the first packet to be specified. Test file
V15_Lrg_Hdr_Test.bfr is attached, it is also a fuzz test as the number
of TLV items given in the header is less then the actual.
3.) It was found that if the number of TLV items given in the header was
larger then present it would fail to open the file. Test file
V9_Num_TLVs_Too_Big.bfr is attached.
svn path=/trunk/; revision=36970
The Locator/ID Separation Protocol [1] is being standardized within the IETF,
and it is nearing RFC status (pending security review). I have been maintaining
a dissector patch for about a year, see [2]. Feedback received indicates that,
among others, it is widely used by the developers of a large router vendor,
without issues.
In January I submitted the dissector for data plane packets as bug #5602, which
was committed as r35615. The patch attached to this bug adds support for
dissection of control plane packets.
[1] http://tools.ietf.org/html/draft-ietf-lisp
[2] http://lisp.ccaba.upc.edu/wireshark/
svn path=/trunk/; revision=36845
zran.c example in the zlib source.
This means that problems in the file's contents might not be reported
when a packet is read, as long as there's no problem in the contents of
the file up to the last bit of compressed data for the packet; we now
check for errors after finishing the sequential read of the file, at
least in some programs, so that shouldn't be an issue (the other
programs need to be changed to do so as well). This is necessary in
order to be able to read all the packets we saw in the sequential pass;
it also lets us get a few more packets from truncated files in some
cases.
svn path=/trunk/; revision=36577
file_read(buf, bsize, count, file) macro is compilant with fread
function and takes elements count+ size of each element, however to make
it compilant with gzread() it always returns number of bytes.
In wiretap file_read() this is not really used, file_read is called
either with bsize set to 1 or count to 1.
Attached patch remove bsize argument from macro.
svn path=/trunk/; revision=36491
This patch adds the capability to create BACnet statistics trees.
Find the respective menu items under 'Statistics->BACnet'.
Packets can be sorted by different criteria:
- Src/Dst IP adresses
- Instance ID
- Object Type
- Service
From me:
- Don't use C++/C99-style comments.
- Name variables for tick_stat_node() don't need to be static.
- Change updateBacnetInfoValue() to require 'data' to be ep_ allocated. Change
the couple of calls that did not send in ep_ allocated data to do so.
- Change one or two functions to be static.
- Do not use (memory-unsafe) g_sprintf().
- Use ep_strconcat() instead of leaking memory with g_strconcat().
- Put back one if(tree) that doesn't appear to do any harm.
- Remove variable declarations and #includes from the header file.
svn path=/trunk/; revision=36468
A patch to add ATM over TCP Dissector.
The dissector dissect only the ATMTCP header (VCI, VPI, Payload Length)
The data are not yet dissect, it is necessary to add a "UAT" (As with the K12
dissector) to indicate the type (ILMI, AAL, ATM...) of data (based on VCI/VPI)
svn path=/trunk/; revision=36354
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5654
From me:
- Entry for DVBCI added to wtap.c encap_table_base[];
- Some code simplification with respect to the use of col_...() for COL_INFO;
- Certain tests for "enough bytes available" not really needed;
- (Other minor tweaks);
- #include<stdio.h> not req'd;
- Minor reformatting and whitespace cleanup;
svn path=/trunk/; revision=36149
Enhance RIPng
* Replace tvb_memcpy/proto_tree_add_text by proto_tree_add_item
* Remove dependency to packet-ipv6.h
* Remove packet-ripng.h (not needed)
Also update AUTHORS file
From me:
Put a check_col() back and reword (shorten) a couple of the new blurbs.
svn path=/trunk/; revision=36033
Update of packet-e212.c dissector according to local national regulatory
MNC assignment document.
www.uke.gov.pl/uke/redir.jsp?place=galleryStats&id=24439
svn path=/trunk/; revision=35889
Add Bearer Control Mode selection support in gtpv1 dissector.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5634
Sligtly reworked by me:
- prefix names with gtp
- Use proto_tree_add_item()
- remove ref to specific protocol version, as it's probably a mix.
- Changed the update to the AUTHORS file.
svn path=/trunk/; revision=35699
- add new PROTECTION obj c-type 2 (RFC4872)
- add new TLVs for IF_ID (RFC4920)
- add Path Key subobj in ERO (RFC5520)
- add new ASSOCIATION obj c-type 4 (oif2008.389)
- add new LSP_ATTRIBUTES and LSP_REQUIRED_ATTRIBUTES objects (RFC5420)
- improved ERROR object dissection and new error values added
- ADMIN_STATUS transformed to filter and new flags added
- minor fix to conversation (not applied to ACK, SREFRESH and HELLO messages)
to resolv displaying of "Unknown session type" string in such messages
Moreover, I've deleted some "enum" statements for error values that I thought
they were useless since they were used only once throughout the RSVP dissector
code.
See https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5518
From me: fix two typos.
svn path=/trunk/; revision=35681
From me: add 0_9 to names for #defines and routines for 0-9, add expert
info for the "you ran past the end of the field table" error.
svn path=/trunk/; revision=35380
ICMPv6 Enhancements : make ICMP option filterable (Part 2)
*Merge (and update) FMIPv6 Option with ND Option
*Make ICMP option filterable (use proto_tree_add_item..)
*Reorder ND Option
*Add dissector for RA Flags Extension (RFC5075)
*Add dissector for Handover Key Request/Reply (RFC5269)
*Add dissector for Handover Assist Info / Mobile Node ID (RFC5271)
*Add dissector for DNS Search List (RFC6106
From me removed a c++ style comment and changed
to tvb_memcpy(tvb, (guint8 *)&prefix.bytes in a couple of places.
svn path=/trunk/; revision=35272
Add a bunch of NetFlow/IPFIX extensions from Plixer and ntop.
A little cleanup as well.
From me: remove duplicate blurbs.
svn path=/trunk/; revision=35142
I'd like to share my enhancements to the TDS dissector with everyone.
The list of improvements follows:
- nearly complete dissection of RPC calls,
- detection and dissection of the ALL_HEADERS rule,
- corrected some existing proto_tree fields to support filters,
- other minor fixes where the interpretation of data conflicted with the
official documentation from MS.
I tested the new code on a variety of different TDS captures with many diverse
RPC calls. The code compiles and works on 32-bit Linux, I didn't check those
changes on other platforms though.
From me:
- terminate all value_strings
- change ++*offset to *offset += 1 (I think that's more readable)
- replace all the dissector assertions which could be caused by malformed
packets with expert infos
- Don't throw ReportedBoundsError when the packets have unexpected data in
them, just report an expert info and continue on
svn path=/trunk/; revision=35007
This is a dissector for reload framed message:
ReLOAD packets can be inserted in frame message, as described in
draft-ietf-p2psip-base-10
From me: remove some unnecessary includes.
svn path=/trunk/; revision=35005
Several fixes that make Tight VNC negotiation properly parsed.
It was not parsed correctly previously, for multiple reasons.
svn path=/trunk/; revision=34976
Add a configuration parameter of the NWG version for WiMAX ASN CP dissector.
The format and meaning of TLVs, as well as function types and messages changed
between the different NWG versions.
Added support for the version number of TLVs in the dictionary xml, its parser,
and of course in the packet itself.
Added support for the version number of function-types and message-types by
extending the value_string structure to contain also a "since" version number.
Successfully tested with a live capture and capture file, containing WiMAX ASN
packets (full Network entry).
Also fuzzed 500 passes successfully.
The XML doesn't contain all existing NWG versions, only selected ones. This is
a little tedious work to go over all TLVs of each version, so I'll add some
newer versions later on. can add a short how-to of adding a new version, for
others to use, if needed.
svn path=/trunk/; revision=34919
This patch adds to Wireshark the ability to dissect Infiniband SDP (Socket
Direct Protocol) and CM MADs traffic.
It also contains various other bug-fixes and enhancements. SDP traffic can be
identified automatically (analyzing SDP CM MADs) or manually.
SDP, or Sockets Direct Protocol, is a protocol developed by the Infiniband
Trade Association which enables existing socket-based applications to
transparently utilize the Infiniband capabilities.
This patch is submitted on behalf of Mellanox Technologies Ltd.
svn path=/trunk/; revision=34918
This patch adds support for displaying OPC UA ExtensionObjects.
An ExtensionObject is a mechanism to transport user defined structures as
serialized blobs. Some types of ExtensionObjects are already defined by the OPC
Foundation's OPC UA Specifications.
These types can be implemented by this dissector, because they are well-known.
Real user-defined or vendor-defined types are unlikely to be implemented by a
passive dissector, because this would require browsing of the UA server's
address space to retrieve the type information.
Currently only the following types are supported:
* DataChangeNotification
* EventNotification
Others OPC defined types will follow.
From me: fix warnings: "format not a string literal and no format arguments"
svn path=/trunk/; revision=34906
The attached patch adds many more DAAP codes to be parsed properly by the DAAP
dissector.
In addition, it fixes some prints.
svn path=/trunk/; revision=34899
The company I work for uses two proprietary protocols, for which I initially
developed wireshark plugins. Now we would like to integrate them into the
public wireshark repository.
I followed the READMEs and converted the plugins into a static dissectors. I
cleaned up the code until checkAPI.pl was silent, translated all terms to
english and ran randpkt and fuzz-testing for a long time. All that I found was
a bug in a different dissector.
From me:
- Fold the header files into the dissectors
- Clean up some memory leaks
- Strengthen the heuristics of adwin-config (the TCP heuristics are still pretty
weak)
- Make packet-adwin.c a "new style" dissector
- Use find_or_create_conversation()
- Remove most of the check_col()'s
svn path=/trunk/; revision=34640
BACnet has a private transfer service which is vendor specific. The start of
each request and response contains the vendor identifier. I've added a way for
vendors to provide their own dissectors by registering their vendor identifier.
The packet-bacapp.c method fConfirmedPrivateTransfer has been modified to look
for a vendor specified dissector. If found it will be run. If not found we
default to running the standard dissection included in packet-bacapp.c.
I modified the summary column display for private transfer messages so that the
summary now displays the Vendor Identifier (V=xx) and the Service Number (SN=xx).
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5250
From me: Rename sub-dissector tablle to "bacapp.vendor_identifier"
Change subdissector ui_name to "BACapp Vendor Identifier"
svn path=/trunk/; revision=34625
RFC 4447 describes new TLV called Generalised PWid FEC in LDP messages with the
id 0x81. This is related to PsuedoWire setup and maintenance.
Related to this, following are the TLVs which are defined in RFC 4447 and RFC 4446.
1. PW Status TLV
2. PW Interface parameters
3. PW Group TLV
From me: remove some unused variables; Mark fcn arg as unused.
svn path=/trunk/; revision=34606
It is a rework of PAP PPP dissector
- Replace proto_tree_add_text by proto_tree_add_item
- add col_append_fstr to show information (Peer-ID, Password...)
svn path=/trunk/; revision=34604
Add dissector for PAPI (Aruba AP Control Protocol), used by Aruba WLAN
Controller).
There is no documentation on this protocol, the dissector is based on my
analysis ...
There is also an experimental "debug dissector" (not enable by default) for
dissecting the rest of data.
Changes by me:
- make it a new-style dissector
- change the name of the "debug" preference
- other minor changes
svn path=/trunk/; revision=34587
The attached patch begins to add support for RPL to the ICMPv6 file. All
locations that RPL code have been added are marked with a comment allowing this
patch to be reverted at a future time if it is decided to e.g. move all the RPL
code to it's own dissector.
A few values await IANA assignment and are also clearly marked (in
packet-ipv6.h).
Only the 'metric' option is left unsupported, as it is primarily defined in
another I-D.
svn path=/trunk/; revision=34579
See: https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5095
From me: Fix a bug in add_symbol which caused occasional Wireshark crashes;
Add additional checking during parse of symbol hash file;
Improve "directory not found" error message;
Do misc code cleanup and simplification.
svn path=/trunk/; revision=34558
Hi a patch to enchance the PPTP Dissector
It is a rework of PPTP dissector
- Replace proto_tree_add_text by proto_tree_add_item
- Replace not standard table and function by standard value_string
- ....
The code is checked and fuzzed (more 200 pass) ! with personnal PPTP Sample and
PPTP Sample from pcapr.net
svn path=/trunk/; revision=34504
The NFS dissector (all versions) show access types that have not been requested
to be checked as "not allowed" in the call and reply. This is incorrect and
misleading. At present one must manually compare what was requested in order
to assess if access was actually denied for that type. When there are hundreds
or thousands of these ACCESS requests in a capture, it is not possible or
practical to manually check each one.
The submitted patch does the following:
* Passes the access mask in the call to the reply for comparison
* Adds filterable fields for each supported (v4) and access type
* Adds a pseudo field, nfs.access_denied
* Lists the access types to be checked in the summary and tree
* Separately lists the supported, denied, and allowed access types in the
summary and tree
The changes are applied to all NFS versions.
From me: a couple of small changes to make it compile without warnings.
svn path=/trunk/; revision=34141
See: https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5067
From me: - Fix one bug;
- Add a comment about some code which doesn't display info
in COL_INFO as intended due to what seems to be a Wireshark bug in
tcp_dissect_pdus() when there are multiple records in a
TCP frame.
svn path=/trunk/; revision=33824
See: https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5051
From me:
- Move proto_register... and proto_reg_handoff.. to the end of the file;
- Define a function as static;
- Minor reformatting and whitespace cleanup.
svn path=/trunk/; revision=33747
so we give a non-zero exit status for invalid interfaces or capture
filters.
From me: don't exit immediately if dumpcap failed, print out information
from taps and the like.
svn path=/trunk/; revision=33393
From me: A few minor changes:
- col-clear() not req'd;
- Use 'gint32 length' rather than 'guint8 length';
- Use ENC_NA instead of FALSE/TRUE in two cases;
- Move global tdmoe_handle to be local to proto_reg_handoff...
svn path=/trunk/; revision=33307
This functionality keeps track of all SMB objects contained in a capture,
and is able to export to a file a full or partial captured file that has
been transfered through the SMB protocol. In a partial capture, the holes
produced by the non-captured information are filled out with zeros.
It includes the needed modifications of the SMB dissector in the way it keeps
track of the opened SMB files and also to feed the eo_smb tap listener.
svn path=/trunk/; revision=33227
Add a new dissector for the NexusWare C7 MTP over UDP/TCP protocol. One of
NexusWare's example applications provide a way to forward MTP Level 3 messages
via UDP/TCP. This is a dissector for this protocol (which is lacking an IANA
assigned port).
svn path=/trunk/; revision=33082
The wireless meshing protocol B.A.T.M.A.N. Advanced changed their packet format
in such a way that now versions can be identified and so correct dissection of
the packets can be supported by wireshark.
Since it is a ever moving target it is very possible that the packet format is
changing slightly. The dissector was written in such a way that new version can
be supported relative easy.
I hope that it sufficient for the inclusion in wireshark.
I tried to fuzzing it some hours and no error was reported.
From me:
Initialize our dissector handles.
Merge packet-batadv.h into packet-batadv.c. It isn't included anywhere else.
Fuzz 500 passes using attached capture files.
svn path=/trunk/; revision=33052
This patch adds a new '-S' option to editcap that will rewrite timestamps of
packets to insure that the new capture file is in strict chronological order.
This option's primary use case is to fixup the occasional timestamps that have
a negative delta time relative to previous packet.
This feature is related to (but does not depend on) capinfos enhancement
submitted in bug #4315 which helps identify tracefiles with "out-of-order"
packets.
svn path=/trunk/; revision=33042
This patch adds a new '-o' option to capinfos (enabled by default) to report if
the packets within a particular capture file are in strict chronological time
order or not.
svn path=/trunk/; revision=33041
I've created a ASN.1 dissector for the IEC 61850 Sampled Values protocol. It
dissects ethernet frames of the IEC 61850-9-2LE specification form the UCA
International User Group.
There is also a new TAP for tshark (-R sv) which extracts the important
information of the frame and allows to create plots (with external tools) of
the sampled values.
I've developed under Linux (Ubuntu 8.10) but everything should be in place for
successful compilation under Windows.
It would be great if this dissector could be included in wireshark. I'm looking
forward for your comments.
svn path=/trunk/; revision=33039
This is an extension to the Wireshark context sensitive protocol help. Rows in
TreeView window are analyzed and suitable help file (as HTML) is opened in a
browser.
The help part (large file, 23 MB) of the Protocol Help can be downloaded under
www.inacon.com/dowload/stuff/protocol_help.tar.gz
This protocol help "light" provides descriptive content for the most frequently
used standard protocols, including IP, TCP or SMTP.
From me:
Changes:
Rename "ph_" in some function names to "proto_help_". Move the protocol
help code to its own module.
Make a bunch of functions static. Remove unused code.
Use browser_open_url() instead of a custom function.
Increase the logging levels. Don't clobber the normal log handler.
Update some Doxygen comments to match the format in the rest of the code
base.
Removed GTK version checks. We've been 2.x only for a while.
Move ph_replace_string to string_replace() in epan/strutil.[ch].
Fix a bunch of memory leaks.
Add a NULL pointer check.
Reformat the overview menu label.
Document the file format and locations.
Add Edgar to AUTHORS.
svn path=/trunk/; revision=32995
Call the various flavors of OS X integration just "OS X integration",
not anything with "IGE" in it - it appears that, in some places,
"ige-mac-integration" refers only to the older Carbon-based functions,
although the library still appears to be called -ligemacintegration.
Update the URLs for the information about the OS X integration
libraries.
Clean up help message for --with-pcap-remote.
Clean up white space a bit.
Speaking of white space, it's "Mac OS X", not "MacOS X".
svn path=/trunk/; revision=32941
Support PPP-over-USB.
Don't remove the USB pseudo-header from the packet data for
Linux USB packets, just byte-swap it if necessary and have the
USB dissector fetch the pseudo-header from the raw packet data.
Update USB language ID values.
svn path=/trunk/; revision=32534
see: https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4590
From me: A few minor changes:
- Make ancp_info a local variable rather than a static global variable;
- Use Stats ! ANCP rather than Stats ! ANCP ! Packet Types.
svn path=/trunk/; revision=32353
See: https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4611
From me:
- Remove #if 0'd #includes;
- Use tvb_reported_length_remaining (instead of tvb_length_remaining)
- Other minor cleanup (including whitespace).
svn path=/trunk/; revision=32319
See: http://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4584
From me:
- Change dissect_sasp_pdu() to return void: tcp_dissect_pdus() ignores
any return value when it calls a dissector and thus trying to register/use
the dissector as a 'new-style' dissector doesn't work as intended;.
- Add some 'expert' messages for invalid SASP Header Type and unknown Message Type.
- Use consistent indentation & cleanup whitespace;
- (A few other minor changes).
svn path=/trunk/; revision=32266
(real and simulated) BMW cars for all kinds of gadget communication.
My plugin only dissects the high level infrastructure and not any particular
messages. It uses a heuristic dissector to detect INTERLINK packets.
svn path=/trunk/; revision=32202
add support for ERROR_STRING IF_ID TLV (see RFC 4783)
add support for generalized label interpretation: SUKLM
format for SONET/SDH label (RFC 4606), t3t2t1 format for G.709 ODUk label
(RFC 4328), G.694 format for lambda label (draft-ietf-ccamp-gmpls-g-694-lamb
da-labels-05). Add related user preference option.
svn path=/trunk/; revision=32127
Add ETSI ts101671 dissector
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4543
I added dissection of
UmtsQos,
IMSevent,
LDIevent,
TARGETACTIVITYMONITOR-1
TARGETACTIVITYMONITORind,
TARGETCOMMSMONITORind,
TTRAFFICind,
CTTRAFFICind
And used the original HI2Operations ASN1 file.l
svn path=/trunk/; revision=32053
Aruba Wireless Controller support a Remote Monitoring of Access Point
The code is based en HP ERM/Cisco ERSPAN dissectors
svn path=/trunk/; revision=31645