Remove dependencies on xmllint. We don't write DocBook by hand any more
and we haven't used it in a long time in the CMake builds.
Change-Id: Ic07f03b00c4554c058eece0462b0925d565b6da1
Reviewed-on: https://code.wireshark.org/review/14506
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Initial import of source code for the dissector of the ISO 8583-1
'financial transaction card originated messages - Interchange
message specification' standard.
Bug: 12244
Change-Id: I24804cab4a93131ec9afa307844ad62eb2e01089
Reviewed-on: https://code.wireshark.org/review/14311
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Lightweight M2M is a protocol on top of CoAP that is used for
device management. The specification contains a custom payload
format - a simple type, length, value binary encoding.
This patch adds support for dissecting this payload format.
While not yet officially registered, the main open source
implementation of the lwm2m protocol - eclipse's leshan - uses this
content type 1542 for its messages.
Bug: 12110
Change-Id: Ib022d1f485c706f1d69ceec7200790448d080965
Reviewed-on: https://code.wireshark.org/review/13835
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
- Add ShowAsASCIIandControl to keep ShowAsASCII only ASCII printable.
- Enable show selected when ShowAsRAW.
- Use QString::fromLatin1() when ShowAs8859_1.
- Don't replace null with symbol for null when ShowAsUTF8.
Change-Id: I25750247160e33d342fde12e6a998e3198270acf
Reviewed-on: https://code.wireshark.org/review/14220
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Bug: 12160
Change-Id: I00771df346893c1112599f8affb9a47f9d793a87
Reviewed-on: https://code.wireshark.org/review/14199
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Let targets depend on the generate_developer-guide.xml target instead of
the developer-guide.xml output file.
Change-Id: I66106ad69c9baedbd58a008b4dbbbf93b787c2c2
Reviewed-on: https://code.wireshark.org/review/14156
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Dissector for the USB3 Vision machine vision camera protocol.
* Descriptors
* Bootstrap registers
* Control (GenCP)
* Stream data
A sample capture (usb_u3v_sample.pcapng) has been uploaded to
https://wiki.wireshark.org/SampleCapture
USB3 Vision a standard developed under the sponsorship
of the AIA for the benefit of the machine vision industry.
U3V stands for USB3 Vision (TM) Protocol
Change-Id: If1206df7974c6a91cf18f59ddecf9d38b9827934
Reviewed-on: https://code.wireshark.org/review/14008
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Documentation changes only (comments and docbook).
Update WSDG with the fragment_add_seq_check API that was introduced in
Wireshark 1.10.
Fix typos and clarify the many functions we have for adding reassembling
fragments.
Change-Id: I38715a8f58e9cf1fe3e34ee4b1a4ae339630282b
Reviewed-on: https://code.wireshark.org/review/14066
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for using regular expressions in the Search Frame
when searching in packet list, packet details and packet bytes.
This search is in many cases faster than plain string search.
Change-Id: I2d8a709046f90d7b278fb39547fc4e2e420623bc
Reviewed-on: https://code.wireshark.org/review/13981
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add an option to decode the packet bytes from base64 or zlib compressed.
Also add configurable start byte and end byte to make it possible to
decode a subset of bytes. It's also possible to select a range in ASCII
view and select "Show selected" from the context menu to make a subset.
In ASCII view a null terminator is replaced by UTF8 symbol for NULL,
and a CR is replaced by UTF8 symbol for carriage return. This is done
to make it possible to "Show selected" from the context menu.
Change-Id: Ie03c9912c304c121af6ca9e998a6e8445b5382c5
Reviewed-on: https://code.wireshark.org/review/13958
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Bug: 12033
Change-Id: I04ad97933639b1c6192608d12a1fb72f4c3725e2
Reviewed-on: https://code.wireshark.org/review/13576
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Show selected packet bytes as ASCII, HTML, Image, ISO 8859-1, Raw or UTF-8.
Images supported are what's supported by QImage, and HTML supported
is what's supported by QTextEdit.
Change-Id: I96fc5c5d222c5389078576463cf78d82cf55528d
Reviewed-on: https://code.wireshark.org/review/13807
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
For historiacal reasons OBEX protocol was implemented as
"Bluetooth OBEX", that means it is OBEX + Bluetooth related stuff.
However Bluetooth related stuff does not caused any issue right now,
so allow to use this dissector in non-Bluetooth cases.
Bug: 11724
Change-Id: Ic645308bc854602d009f254ebbfd1b703a4c6a25
Reviewed-on: https://code.wireshark.org/review/13740
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Userlog is user flow logs of H3C device.
Flow logging records users' access to the extranet. The device classifies and
calculates flows through the 5-tuple information, which includes source IP address,
destination IP address, source port, destination port, and protocol number,
and generates user flow logs. Flow logging records the 5-tuple information of
the packets and number of the bytes received and sent. With flow logs, administrators
can track and record accesses to the network, facilitating the availability and
security of the network.
examplecapture: https://wiki.wireshark.org/SampleCaptures#UserLog
Bug: 11878
Change-Id: If3b5ca75bdd6cd8dc12af4a35401c5a6aa193a73
Reviewed-on: https://code.wireshark.org/review/8148
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move ui/filters.[ch] to filter_files.[ch] because dumpcap is using functionality.
Bug: 8091
Change-Id: I195c82fc023f97d6f331b8718c45a2d83d30faea
Reviewed-on: https://code.wireshark.org/review/5925
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
IPOS is the networking operating system used in
Ericsson's SSR 8000, Router 6000, and SP routers, etc..
This change added the IPOS kernel packet header dissector.
The change creates a new file for IPOS protocol named "packet-ipos.c".
IPOS will register sub dissectors with the dissect
table "sll_linux_dissector_table" for IPOS internal ethernet
packet types. IPOS dissector also calls the existing REDBACK
dissector.
Change-Id: I642b932010be6aa05314f21ea8596d1c45eacf5b
Reviewed-on: https://code.wireshark.org/review/13408
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update images and describe related packets and the intelligent
scrollbar. Suggest a way to make it easier to get a screenshot of
related packets.
Change-Id: I5bf27b0c53fb62f3e567765400141a374a465e4e
Reviewed-on: https://code.wireshark.org/review/13159
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Update link to Gerrit.
Update Windows Git section with info on install options
and updated links.
Fix CMake section header level.
Change-Id: I24769534e07e79a0608201e103cb8f1b8625cf86
Reviewed-on: https://code.wireshark.org/review/13158
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
1. Pump Configuration and Control
2. Fan Control
3. Dehumidification Control
4. Thermostat User Interface Configuration
Change-Id: I854f992a0c6e8a5714f308e97f30e7bc26fb73fc
Reviewed-on: https://code.wireshark.org/review/13102
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for Generic Framing Procedure. Generic Framing Procedure (GFP)
is used to map octet-aligned variable length payloads (e.g. Ethernet, MPLS,
octet-aligned PPP, IP) into octet-synchronous signals such as SONET/SDH
(ITU-T G.707) and OTN (ITU-T G.709). GFP is a telecommunications industry
standard defined in ITU-T G.7041/Y.1303.
(https://www.itu.int/rec/T-REC-G.7041/)
Bug: 11961
Change-Id: Idf5b311e82b051b1ee65bde5149b3de405537b02
Reviewed-on: https://code.wireshark.org/review/13043
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
* tvb_*_length mentioned in README.dissector
* fixed typos in README.dissector
* using stats_tree_register_plugin in the stats_tree examples both in README.stats_tree and the dev guide
* removed the version information and the #endif from the stats tree section in README.dissector
Change-Id: I27df0b5dfd66a7c0ac5b0fe1bdc882b3e9ffda74
Reviewed-on: https://code.wireshark.org/review/12908
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This dissector was mostly code-reviewed in a previous change:
https://code.wireshark.org/review/#/c/11305
But it had an issue with a pointer using a sequence number (8 Bytes).
This change is meant to correct that, as well as a small formatting
error I found in the text shown.
Change-Id: Ib7e27eb2734c46e970b99161bd04438b5675bde4
Reviewed-on: https://code.wireshark.org/review/12660
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Qt already has a menu item for this in Statistics -> Capture File Properties
Bug: 9628
Change-Id: I85dd6f85d43fbfb60c2f4db82d9a02d91866127c
Reviewed-on: https://code.wireshark.org/review/12725
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This dissector shows the information related to the RTI TCP Control
messages used to manage the TCP connections, but also dissects the
RTPS data that is sent on top of RTI TCP. This only happens with
RTI's DDS implementation.
Bug: 11640
Change-Id: I89fcb620256aeed7cae5829b70d92c6868d94929
Reviewed-on: https://code.wireshark.org/review/11305
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Developed by Emerson Industrial Automation (Control Techniques Division)
eCMP is a protocol for setting up and controlling the devices in a factory
automation system. eCMP has about 30 commands; most are embedded into TCP/IP
messages, but cyclic data messages use the UDP protocol.
Bug: 10562
Change-Id: I9a421f39dfbdbc9e28d8f7cba72c22e270064641
Reviewed-on: https://code.wireshark.org/review/3157
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Try to clarify 2003 and XP support in the User's and Developer's guides.
Change-Id: Id08b21374485bf7655b83bb20b7c3d70f8871499
Reviewed-on: https://code.wireshark.org/review/12275
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Almost all replacements were done awhile ago, just put the final nail in the coffin.
Change-Id: I0a708d886da5a500c2a1e2c9ee2736794bdb9411
Reviewed-on: https://code.wireshark.org/review/12206
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The typedef for the "old style" has been removed as well as any old vs new style checks.
The release notes have been updated to reflect the API change, even though the search/replace of the "new style" function names hasn't happen yet. But it will be coming shortly...
Change-Id: I6d1eeb51d30e3b2b27f0eafd85fe0ddc0ca25b14
Reviewed-on: https://code.wireshark.org/review/12153
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove references to nmake, add references to CMake.
Change-Id: Iea2d2b2fbdbab131bae823d5d6a5306630a70347
Reviewed-on: https://code.wireshark.org/review/12079
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Fix a bunch of typos.
Commented out Strawberry Perl section on Windows, CMake no longer
uses it.
Removed commented out svn commit section.
Change-Id: Ied53c1b9aed69dc2c99449ef198f69a8cba42d5e
Reviewed-on: https://code.wireshark.org/review/12011
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Do not remove "ws.css" when doing a build in the source tree. Ignore
files that were automatically generated with cmake and the Ninja
generator (cmake -GNinja).
Change-Id: I24cae27eb8ae9664e3354ba646fd5503649349b1
Reviewed-on: https://code.wireshark.org/review/12007
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Update the docs to indicate the modified -G parameter required for
CMake when building an x64 version.
Change-Id: I9cc75ca99daf248111242c2962df313de32ca0d1
Reviewed-on: https://code.wireshark.org/review/11992
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Id0c583eacbef01d9dbdb54c27893d44cc32d9a31
Reviewed-on: https://code.wireshark.org/review/11680
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The one from official CMake (3.3.2) does not look for the default 64bits installation path. Let's add it.
Also add a WIRESHARK_CYGWIN_INSTALL_PATH environment variable allowing to force it.
For reference, registry based detection fails to detect a 64bits installation because it gets redirected to the Wow6432 node.
Change-Id: If3172494e3ab232e094389b493e6b67023662ae5
Reviewed-on: https://code.wireshark.org/review/11769
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
CMake generated CHM supports it properly, contrary to NMake. As this is the future, let's put it back!
Change-Id: Ifc5ea84942043c04808546df75ae956effa16747
Reviewed-on: https://code.wireshark.org/review/11763
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Specify which ./configure options are passed into the RPM.
Describe the 3 package RPM package names and their contents.
Describe how to enable parallel builds when making RPMs.
RPM now stands for "RPM Package Manager."
Fix some markup problems.
Change-Id: I1664aa0956719e872d302a4af2c092318f5eea6d
Reviewed-on: https://code.wireshark.org/review/11737
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This is a dissector for the ISO14443 protocols between a contactless
smartcard and a card reader.
The overall approach is similar to DVB-CI. We have a pseudo-header in
front of the captured data that has information about the type of the
captured data and the direction.
For now, the dissector registers itself by name so it can be linked to a
user-DLT. I am applying for an official DLT.
Change-Id: I9c4a28ef5b220f205baf58381bf1962996887a9d
Reviewed-on: https://code.wireshark.org/review/11663
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: I16280d3fd4023c5a16026e8e10f1d12dfca45641
Reviewed-on: https://code.wireshark.org/review/11657
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Updated the WSDG Windows build instructions to use CMake.
Change-Id: I5006c07e09ec6f628e8bc44006a3f1086e831a3c
Reviewed-on: https://code.wireshark.org/review/11485
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Updated the main window and main menu screenshots. Update the markup for
the File and Edit menus.
Change-Id: I31282e3913692895a35e749c54c77c8069c7167a
Reviewed-on: https://code.wireshark.org/review/11487
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Also reword the "reload of the current capture file as MIME or capture file"
item a bit.
Lastly, these release notes are a preview of 2.2 now (not 2.0).
Change-Id: Ie0ad7573b0df56534d02b8942b7a6376546bedc5
Reviewed-on: https://code.wireshark.org/review/11287
Reviewed-by: Michael Mann <mmann78@netscape.net>
The title "New File Format Support" containing a list that included PCAP and
PCAPNG caught my eye: Wireshark has supported those for years. (Attempt to)
explain what it means.
Change-Id: I472fabcca00befee9032cd7ef11bf30257b8ff8e
Reviewed-on: https://code.wireshark.org/review/11076
Reviewed-by: Anders Broman <a.broman58@gmail.com>
(cherry picked from commit 1a434143693a7f9ce103dfcf53e60c63415c81e8)
Reviewed-on: https://code.wireshark.org/review/11147
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
You can switch now between Capture mode and FileFormat of it.
This works only if there is MIME FileFormat dissector of opened file.
Change-Id: I9e98e972775561cfbe731ee1a1b99300d119efc6
Reviewed-on: https://code.wireshark.org/review/10090
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
For it shall cast a blight upon xmllint validation.
Change-Id: I3d39f1ace960aba738e494190dad1f15da2e39d9
Reviewed-on: https://code.wireshark.org/review/10990
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Neighborhood Watch Protocol (NWP) is an XIA protocol for resolving network
addresses to link-layer addresses. Hosts on a LAN send NWP Announcement
packets with their host identifiers (HIDs), and neighbors in the LAN respond
with NWP Neighbor List packets containing their HIDs and associated link-layer
addresses.
Bug: 11492
Change-Id: Ib1e801474b1aa72f5dd3d8303eeec36b96ee0a99
Reviewed-on: https://code.wireshark.org/review/10316
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This replaces a question (recently remarked upon on -users) with a link to
someplace where we already have documentation on the subject.
Change-Id: I6c5cf2b0f674c129aaa017da0ca44176c5be665f
Reviewed-on: https://code.wireshark.org/review/10677
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Its time has finally come.
Technically I just renamed it to proto_tree_add_text_internal and removed the WS_DLL_PUBLIC (so it shouldn't link outside of epan). It's still (legitimately) used by expert.c otherwise I would have made it static within proto.c (and the rename wouldn't have been necessary).
Change-Id: I9bdf888d5e92bc7b70a3f5461b9297a66d994b80
Reviewed-on: https://code.wireshark.org/review/10594
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
TCPROS is a transport layer for ROS Messages and Services.
It uses standard TCP/IP sockets for transporting message data.
Inbound connections are received via a TCP Server Socket with a header containing message data type and routing information.
For more information, see: http://wiki.ros.org/ROS/TCPROS
Bug: 11404
Change-Id: If8810dbb2cb6d6522eb035fd0fa1cf49933bad3d
Reviewed-on: https://code.wireshark.org/review/9807
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Added the wifi capturing feature in the Androiddump.
Wifi packet capturing is done by making use of tcpdump in android devices.
Android wifi will appear as a capture interface in the interface window.
This will be an added support for android devices for device network bandwidth analysis.
Change-Id: I71d24ae5d1764d3ee7e50f09cd0b530ee9654844
Reviewed-on: https://code.wireshark.org/review/10414
Reviewed-by: ronnie sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Added a new relational test: 'x in {a b c}'. The only LHS entity
supported at this time is a field. The generated DFVM operations are
equivalent to an OR'ed series of =='s, but with the redundant existence
tests removed.
Change-Id: Iddc89b81cf7ad6319aef1a2a94f93314cb721a8a
Reviewed-on: https://code.wireshark.org/review/10246
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Copied from the RTP Analysis dialog, just like the GTK+ version.
Change-Id: I111020bc4073a3a3ba583bdace51a91ee5fef300
Reviewed-on: https://code.wireshark.org/review/10447
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Serval is a service-centric architecture that has been ported to XIA to
allow applications to communicate using service names. This change adds
a dissector for XIP Serval, which sits between layers 3 and 4, and
also amends the XIP dissector to be able to invoke it.
Bug: 11491
Change-Id: I11299ddbd0fb9eaf8728f8b3fde2a63656963114
Reviewed-on: https://code.wireshark.org/review/10315
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add ProgressFame::addToButtonBox, which violates the UX guidelines on
every platform we support by inserting a ProgressFrame into a
QDialogButtonBox.
Call addToButtonBox in the constructors of a bunch of dialogs.
Change-Id: I33ac5fd7a976ee6e0527de569a5c4b528980dae1
Reviewed-on: https://code.wireshark.org/review/10242
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This adds a dissector Concise Binary Object Representation (CBOR) (RFC 7049).
CBOR is a binary data format designed for implementations with small
code size as used in the IoT. It uses a structure similar to JSON, but
encodes the data in binary format. This is used on top of CoAP for
example.
Change-Id: I9d7b7d4f7609c899bfc68250cdfebd5dc64e0402
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-on: https://code.wireshark.org/review/9848
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
They have educational values and can be used to debugging some issues.
Now Wireshark can open three files (BTSNOOP, PCAP, PCAPNG)
in two modes: Capture (Traditional) and File-Format.
Change-Id: I833b2464d11864f170923dc989a1925d3d217943
Reviewed-on: https://code.wireshark.org/review/10089
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add custom {developer,user}_guide_docbook targets for docbook output. Make
sure the HTML, PDF, and CHM outputs depend on their associated docbook
target and not on the output .xml file. This keeps us from running a2x
instances in parallel.
Change-Id: I73b0db50ae92f62eb08ae284d498cdf2d697ac00
Reviewed-on: https://code.wireshark.org/review/9920
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Improve consistency when referring to 3GPP TS 32.423:
- The standard name is "3GPP TS 32.423" (with "TS", and "." separator).
- Fix typo in number series ("32" not "34").
- The standard refers to "Trace", not "Nettrace".
Change-Id: If9994b9c6de69b6e1bdfc6679fbaabe698971949
Reviewed-on: https://code.wireshark.org/review/9795
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move the boolean flag for using captured DNS packet info for name resolution
to the Name Resolution preferences settings, as it was rather surprising to
disable Name Resolution preferences and still have names being resolved. Also
disble them all if the '-n' command line switch is used, and re-enable it for
a 'd' character in the '-N' option.
Bug: 10337
Change-Id: Ie4d47bab0100db3360cc447cd3e446b2e39aa917
Reviewed-on: https://code.wireshark.org/review/9786
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
This changeset is a forward port of Gregors ms-wsp branch from his
repo http://repo.or.cz/w/wireshark-wip.git. Most of the messages of
the MS-WSP protocol are implemented here and as such consists of the
majority of the changes for the dissector.
In addition to the forward porting Gregors work I added some extra bits
1) cater for SMB2 Read Response and Write Request msgs that can also
contain MSWSP messages
2) update property specifications with info extracted from MS-WSP protocol
doc
3) store some basic data about previously seen messages that are needed
for dissecting CPMGetRows request
4) expand/update dissect_CPMSetBindings & parse_CTableColumn routines
5) parse and store CTableColumn & CPMSetBindingsIn structures in conversation
related data for use later.
6) fully dissect/parse SeekDesciption of CPMGetRowsOut
7) dissect CPMGetRows out message specifically the Rows & Columns
8) flesh out the boolean properties of uBooleanOptions field
9) flesh out various other dissectors:
CPMRatioFinished
CPMRestartPosition
CPMCompareBmkIn/CPMCompareBmkOut
CPMGetApproximatePosition
CPMGetSendNotifyOut
FindIndicesIn/Out
FetchValue
Bug: 11321
Change-Id: I68b5c2f3e63874c1dbb271feab89b2b8aa65ac39
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-on: https://code.wireshark.org/review/9440
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Ia31326105cf559c2196d45369270552fb78da6c7
Reviewed-on: https://code.wireshark.org/review/9692
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
HCI Summary dialogue collect HCI Opcodes, HCI Events, Hardware Errors,
Statuses and Reasons. Also show occurrence of them. The top level item
is group of items (by OGF or types), the second level item is in real
command, event, hardware error, status or reason. The third level items
are direct link to packet that contains second level item type.
Change-Id: I6b6bd02533c4605a2dd2c1f5dfee46f72a0f3fdc
Reviewed-on: https://code.wireshark.org/review/9676
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Future: Allow multiple protocols to be disabled in one option statement
(perhaps using a comma or colon delmited set of names in <proto_name>)
instead of having to specify --disable-protocol <proto_name> multiple times.
Change-Id: I9b8f960acf75298ebb098d9b667fca49dca52306
Reviewed-on: https://code.wireshark.org/review/9631
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The size of some of the wslua source files has grown large, and it's hard
to quickly find things. So split them up based on class name, as much as
seems reasonable. Also have the make-wsluarm.pl Perl script handle this.
Change-Id: Ib495ec5c2a4df90495c0a05504856288a0b09213
Reviewed-on: https://code.wireshark.org/review/9579
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
The eXpressive Internet Protocol (XIP) is the network layer
protocol for the eXpressive Internet Architecture (XIA), a
future Internet architecture project. The addresses in XIP are
directed acyclic graphs, so much of the code included in this
addition verifies the correctness of the DAGs and displays them
in human-readable form.
Bug: 11265
Change-Id: I948aaa73b927f8afc162d89689d184c5657f60b1
Reviewed-on: https://code.wireshark.org/review/8881
Reviewed-by: Evan Huus <eapache@gmail.com>
Petri-Dish: Evan Huus <eapache@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Fix a typo ("and and") while we're at it.
Change-Id: Ib68bbdf0b358f56b36cf53906f105c5ee6493ec4
Reviewed-on: https://code.wireshark.org/review/9446
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The pathnames have spaces, so they must be quoted.
At least on my VM, I had to run it as Administrator.
Change-Id: I7600edbdbe3205c7f766cc651bd6b86340efa0ff
Reviewed-on: https://code.wireshark.org/review/9429
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Split the nsis_package target into nsis_package_prep which has
dependencies and nsis_package which has no dependencies and as a result
blindly builds the package. Remove the nsis_uninstaller target since
that's now handled by nsis_package_prep. Nsis_package_prep *should*
also take care of the dependencies for portableapps_package, but that
hasn't been tested.
Update the Developer's Guide.
This requires coordination with the Windows buildbots.
Change-Id: Ib9e3141832c782355135a1637fba5a07c2ca4ba1
Reviewed-on: https://code.wireshark.org/review/9217
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Please found it under Bluetooth menu. It shows all devices found
in logs, not only connected, all that its address can be found in
logs. Show if device is local (in most cases: capturing on it side)
and manufacturer and LMP version what should answer the question what
version of Bluetooth is used by Bluetooth device chip.
Also firmware version.
Change-Id: I32e3b7100cdebcaa850b6541de0ab89dff41c0e1
Reviewed-on: https://code.wireshark.org/review/8901
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Add support for RPCoRDMA and as a result support NFSoRDMA protocol
Bug:11251
Change-Id: I1a4af1b4e6b344224f5ce0efa77d7dbfca8aae46
Signed-off-by: Slava Shwartsman <slavash@mellanox.com>
Signed-off-by: Yan Burman <yanb@mellanox.com>
Reviewed-on: https://code.wireshark.org/review/8758
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Implements dissection for the Performance Co-Pilot proxy protocol. Its a
simple protocol that exchanges host and port information and then passes
all traffic via the usual PCP protocol.
Change-Id: I54fbf6b7755b7b1c60e0e1696ac9c4f0d98d8fe7
Reviewed-on: https://code.wireshark.org/review/8704
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes from the GTK+ UI:
- The display filter is built on the fly with immediate syntax feedback.
- Slightly different layout.
- You can search for fields.
Make the plain SyntaxLineEdit a bit more plain.
Bug: 11128
Change-Id: I06a48cd7b9ba7b9dc193b0199540aede4eb62fa7
Reviewed-on: https://code.wireshark.org/review/8742
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I6c5405beef4e8d880d73d9706e61e953431cce4f
Reviewed-on: https://code.wireshark.org/review/8504
Reviewed-by: Michael Mann <mmann78@netscape.net>
A IRC user was asking about the meaning of `my.username` and noted that
information is scattered over places. This patch tries to make the
documentation more friendly for newcomers which are unfamiliar with
Gerrit (and maybe OpenID?).
The login page already recommends Launchpad, so no need to write it
here.
Change-Id: Ic55c9a2073d0045c6367f3efc8c842e53215f2dd
Reviewed-on: https://code.wireshark.org/review/8288
Reviewed-by: Mark <launchpad@markcunningham.ie>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Bug: 11063
Change-Id: I3daa9e6a75e52df1587678bd78f42e4e46fe4509
Reviewed-on: https://code.wireshark.org/review/7557
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Remove check_git_version.sh and its associated targets. We haven't used
git_version.xml since the AsciiDoc conversion.
Change-Id: I480f0094c4355d71201f2dd285198581bbbfc415
Reviewed-on: https://code.wireshark.org/review/8104
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
- GIAS dissector
- Netscaler 3.5 support
- GUI menu API for plugins
Change-Id: I88f52a73e1149de6fe0588c1316b27fac9af59ce
Reviewed-on: https://code.wireshark.org/review/8090
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add win-setup.ps1, which duplicates the following tasks performed by
config.nmake + Makefile.nmake + win-setup.sh:
- Create the windows library directory.
- Download files.
- Download and unpack zip files.
- Check and set current-tag.txt
Don't verify applications or libraries. CMakeLists.txt does that.
Update the Developer's Guide.
Have POWERSHELL_COMMAND use dot sourcing instead of "-File", which
appears to be a synonym for "-IgnoreTheExitStatusReturnedByThisScript".
This removes our dependencies on unzip and wget and reduces our dependency
on bash.
Change-Id: Ia9def24acbe183d81b9d477fa42e655e4a3a6614
Reviewed-on: https://code.wireshark.org/review/7990
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add missing androiddump stuff like:
- release notes
- documentation
- Windows nmake support
- running androiddump as a windows application instead of console on Windows
- addition of androiddump to the Windows installer
Change-Id: I3bc6cc70e4dc96c0cd776f3d965dd2aa0309995d
Reviewed-on: https://code.wireshark.org/review/7981
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Update the PA section of the Developer's Guide.
Change-Id: I383d2a2405e742eb353390f5a43fd6d6d32cb25b
Reviewed-on: https://code.wireshark.org/review/8012
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Bug: 5553
Change-Id: If297036b6d7a7afe163d97b05bc4a319d6cf2e97
Reviewed-on: https://code.wireshark.org/review/7949
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Its CA certificate configuration appears to be incomplete. Recommend
Cygwin's instead.
Change-Id: I0e7ddbfbb2a37f2872a820442e2d185f20ef551e
Reviewed-on: https://code.wireshark.org/review/7948
Reviewed-by: Gerald Combs <gerald@wireshark.org>
A recent commit broke compilation with Python 3. The original author of
html2text.py is deceased and the fork has increased the number of files
for this "simple" helper.
The html2text.py script in this patch was rewritten and its output
matches with lynx (except for a few newlines around lists). This means
that indentation has been added for headings, paragraphs and lists.
Also, since it was written from scratch, a new license could be chosen
that matches Wireshark.
Since now the in-tree html2text.py script provides nicer output, remove
detection of the alternative programs (elinks, links). lynx/w3m is
somehow still necessary for asciidoc though.
(I also looked into reusing html2text.py for the release notes to
replace asciidoc, but the --format=html output produces different output
(HTML adds a ToC and section numbers). For now still require lynx for
release notes)
Tested with Python 2.6.6, 2.7.9, 3.2.6 and 3.4.3 under LC_ALL=C and
LC_ALL=en_US.UTF-8 on Linux. Tested reading from stdin and file, writing
to file, pipe and tty. Tested with cmake (Ninja) and autotools on Arch
Linux x86_64. Test:
# For each $PATH per python version, execute (with varying LC_ALL)
help/faq.py -b | tools/html2text.py /dev/stdin | md5sum
help/faq.py -b | tools/html2text.py | md5sum
help/faq.py -b | tools/html2text.py
help/faq.py -b | tools/html2text.py >/dev/null
Change-Id: I6409450a3e6c8b010ca082251f9db7358b0cc2fd
Reviewed-on: https://code.wireshark.org/review/7779
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Most of our sites are now HTTPS-only. Update URLs accordingly. Update
other URLs while we're at it. Remove or comment out dead links.
Change-Id: I7c4f323e6585d22760bb90bf28fc0faa6b893a33
Reviewed-on: https://code.wireshark.org/review/7621
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Took the original patch from bug 5116 and made the dissector "human readable".
Bug: 5116
Change-Id: Ic5cc35f919865bc84ee8a3d0589f498ef13e8f6f
Signed-off-by: Michael Mann <mmann78@netscape.net>
Signed-off-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-on: https://code.wireshark.org/review/7605
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Originally suggested by Bill Meier for the MQTT protocol[1], but the
Websocket protocol can also benefit from this. Since
DESEGMENT_ONE_MORE_SEGMENT is a valid packet length, use the zero length
instead as an indicator that the length is not yet known.
Updated documentation too and remove the function documentation from
packet-tcp.c since it is duplicated in packet-tcp.h.
A noteworthy WSDG change is that the get_pdu_len parameter of
tcp_dissect_pdus gained another void pointer since
v1.99.2rc0-890-gceb8d95 ("Lua: Expose tcp_dissect_pdus() to Lua").
[1]: https://www.wireshark.org/lists/wireshark-dev/201405/msg00044.html
Change-Id: I4eba380e00cd757635eb5639c2857356dae3171e
Reviewed-on: https://code.wireshark.org/review/7279
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
* Support per draft-ietf-grow-bmp-07
Change-Id: Iadb833157e7832077429c048e28e9814da29e2c6
Reviewed-on: https://code.wireshark.org/review/7192
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
... with some changes from Jeff Morriss:
- Change how SSTP is "registered": rather than trying something complicated,
just put the intelligence for recognizing SSTP into the HTTP dissector.
(This does mean the SSTP dissector needs to do its own desegmentation now
but it makes things much cleaner.)
- Use proto_tree_add_subtree_format() instead of proto_tree_add_text() +
proto_item_add_subtree().
- The messagetype is 16 bits, use tvb_get_guint16() instead of tvb_get_guint8()
(fixes COL_INFO display)
- A few other few misc. cleanups
(I didn't update NEWS because I can no longer build NEWS without adding UTF8
fancy quotes and so forth.)
Bug: 8239
Change-Id: I3631ae65f67bea69815ccf43472fdbcac3ca3499
Reviewed-on: https://code.wireshark.org/review/7227
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add QNEX6 (QNET) and add description for some other protocol (GVSP, corosync...)
Change-Id: Ia515a134e73835e6d2c81e8ccc210e9fcc424701
Reviewed-on: https://code.wireshark.org/review/7134
Reviewed-by: Michael Mann <mmann78@netscape.net>
Update the protocol hierarchy, conversation, and endpoint sections of
the User's Guide. When everything is an admonition nothing stands out.
Make a series of "NOTE"s plain old paragraphs. Scale the new
conversation and endpoint images to fit the page width. This looks funny
in my browser but I'm not sure about the best way to fix it.
Move image/compress-pngs to the tools directory. Use it to reduce the
size of the WSUG and WSDG images.
Fixup traffic table column names and window titles.
Change-Id: I674342ed901fc64563b384ee5e1f35413736cb19
Reviewed-on: https://code.wireshark.org/review/7122
Reviewed-by: Gerald Combs <gerald@wireshark.org>
You can open a new packet window in the GTK+ UI by holding down the
shift key and double-clicking on a frame link in the protocol tree. Add
this behavior to the Qt UI. Document the different ways of opening a new
packet window and update the image.
Change-Id: I55caf6cc8089a6c305fafd47b4870e7c69dbfb10
Reviewed-on: https://code.wireshark.org/review/7101
Reviewed-by: Gerald Combs <gerald@wireshark.org>
There is still a little more work to do here, especially we should call the
SCSI dissector for handling SCSI CDBs etc ...
This is a potential fix for bug 10913.
Ping-Bug: 10913.
Change-Id: Ia8ff1a8207bb5b1cd18079086ff8c472ae3f8736
Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com>
Reviewed-on: https://code.wireshark.org/review/7022
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Move the release-notes-*.pdf targets to a release_notes_pdf metatarget
which must be built manually.
Change-Id: I067a4e248e6e68d1ff60aafad5d75c1180536e0f
Reviewed-on: https://code.wireshark.org/review/7088
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move some text from README.qt to the Developer's Guide. Add an overview.
Change-Id: Ia20ed837939e34871b157566c38cd0c6e590bc38
Reviewed-on: https://code.wireshark.org/review/7087
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We tend to clobber the reader with admon blocks. Make the preceding and
succeeding ones normal paragraphs.
Change-Id: I0c70af93feb586d2e8f6120e2842fab52379b76f
Reviewed-on: https://code.wireshark.org/review/6970
Reviewed-by: Gerald Combs <gerald@wireshark.org>
from building as well as a hint about downloading the vcredist_xYY.exe file.
Change-Id: I6ae9a045939a77ba2c9584f05124fdc8f355f11c
Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com>
Reviewed-on: https://code.wireshark.org/review/6916
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Change-Id: Ib13d9391b64dad19321a4399c95b95d7fb791284
Reviewed-on: https://code.wireshark.org/review/6421
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Move PowerShell and Chocolatey to the top of the quick setup since most
of the instructions now have a "Chocolatey" example.
Use "choco install" instead of "cinst" to match the pages at
chocolatey.org/packages.
Show how to install Cygwin and Python using Chocolatey.
MAC = Media Access Control (among other things). Mac = Macintosh.
Change-Id: Ic6aabacdd3a86b4e8ca556cc6f3daa62c3e5986b
Reviewed-on: https://code.wireshark.org/review/6924
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Further removal of older style build environment.
Change-Id: I499ba50f55620ad627de3dc4316051985d00a7f5
Reviewed-on: https://code.wireshark.org/review/6918
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Added comment about VS2013 being the preferred option.
Added instructions for Win32.Mak.
Change-Id: Ic2cca5123c471d9a806d0f4a387f82ad30ace9f6
Reviewed-on: https://code.wireshark.org/review/6886
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Change-Id: I256fd5395b062fa954ebd60598721323ea1d7ff1
Bug: 10875
Reviewed-on: https://code.wireshark.org/review/6713
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The format of the API chapter was a bit screwed up, as was the
indentation level of attributes. Also, some functions introduced
in 1.11.3 were not documented as being since that version.
Change-Id: I7912488c6da5b5ae72933e4c5ce49f8fbf0b0e34
Reviewed-on: https://code.wireshark.org/review/6753
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove in NEWS by gca174999
Change-Id: I000b7d6421db247dcafacfa73ef049e938d42cc5
Reviewed-on: https://code.wireshark.org/review/6650
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
this is a protocol between payment terminals and
electronic cash-register systems / vending machines
Change-Id: Ieac87c0af8e15f2dfe8b4a6274f3b56d652a5b1f
Reviewed-on: https://code.wireshark.org/review/6531
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Martin Kaiser <wireshark@kaiser.cx>
FOP is only required for generating PDF output and HHC is only needed
for CHM output. Don't look for them unconditionally.
Change-Id: I7bec7d061c9e9e8b99431cab873e8c719469552c
Reviewed-on: https://code.wireshark.org/review/6539
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Corrected info about paths to built executable.
Cross referenced empty debugger sections to the section with info.
Change-Id: I4366825990f1a5286c7292c9f00e540160c1b5d0
Reviewed-on: https://code.wireshark.org/review/6520
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
(This change also brings NEWS up to date with release-notes.asciidoc)
Change-Id: Ie61c27901947210ddf95bbb1bb8c36e489bc0c8c
Reviewed-on: https://code.wireshark.org/review/6456
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This gives a more structured layout in Visual Studio
Change-Id: I0da87a3e5ec759c69aeee031366cf287485cdac2
Reviewed-on: https://code.wireshark.org/review/6485
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Graham Bloice <graham.bloice@trihedral.com>
Add a wrapper script and CMake macros which lets us run Cygwin's a2x
from Windows. Add *another* wrapper script that ignores the return value
of hhc.exe.
Move the ASCIIDOC2DOCBOOK macro to FindASCIIDOC.cmake. Add FindHHC.cmake.
Add hints to FindFOP.cmake.
Use unique file names in the HTML Help chain in an attempt to avoid a
race condition.
To do:
- Fix curly quote in HHC title.
Change-Id: I9b154b7fbd02703656e2ab380199ec0a6db4e36d
Reviewed-on: https://code.wireshark.org/review/6379
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I4f1078b20f41800f72a751612703ad0d4c2ae87b
Reviewed-on: https://code.wireshark.org/review/6323
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Drop references to long obsolete compilers.
Added Chocolatey installer instructions for some packages.
Change-Id: I416d4091b6acaa1ed0d5e586f0427708c4b2d646
Reviewed-on: https://code.wireshark.org/review/5986
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Use by MACSec
Change-Id: I27eee40ddc476435aecd57711c1b3597c2049901
Reviewed-on: https://code.wireshark.org/review/5751
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Add convenience targets for generating the release notes and the NEWS
file. Make sure we don't run multiple instances of a2x + AsciiDoc at the
same time.
Add the docbook directory to the build by default unless we're running
Windows. Explain why we don't yet build docs on Windows. Make each
docbook makefile target optional.
Split the ENABLE_GUIDES option into ENABLE_HTML_GUIDES and
ENABLE_PDF_GUIDES. Add a default "all_guides" target if either is on.
Remove the Debian patch that hacked around the PDF requirement.
Copy ws.css to the docbook build directory. Don't build PDF release
notes. I'm not sure we ever used them and I don't want to install Java
and FOP just to make a release.
Change-Id: Ia2f710000c17f9e0b4b514fd373d9a5902889553
Reviewed-on: https://code.wireshark.org/review/5712
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a note about HiDPI / retina. Remove the Kerberos known problem.
Change-Id: I452bc5ed9db51f7bf32b25eab39371fafd3102aa
Reviewed-on: https://code.wireshark.org/review/5708
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add Telephony menu items for VoIP Calls and SIP Flows. Put VoIP Calls at
the top, since that seems to be the primary item.
Add configure-time checks for QtMultimediaWidgets in anticipation of
adding a VoIP playback dialog.
Add an icon for the playback button. (Yes, I've been avoiding
GNOME-level gratuitous icons so far but this is one of the rare
occiasions where it makes sense.)
Add a help link define for the VoIP calls dialog.
Change-Id: I5d0799685c598ad9af76fe9667f8ea7d14b66050
Reviewed-on: https://code.wireshark.org/review/5674
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Go back to a single view similar to the GTK+ UI. Apply layouts using Qt
Designer.
Rename the menu item and class to "Capture File Properties". It's not
really a summary if it contains details such as "marked average bits
per second". We might want to move this to a "Properties" item under
the "File" menu similar to other applications.
Add the GTK+ summary icon (for now) to the toolbar and open the
properties dialog on clicking.
Singleton dialogs delenda est[1]. Let the user open as many summaries on
as many capture files as he or she wishes. Also, global cfile delenda
est[2].
Don't blindly include QtGui. Add specific components instead.
Use consistent method names, variable names, and patterns. Try to
document what "consistent" means.
Adjust the way we display some statistics to match the summary bar, e.g.
displayed = captured if we don't have a filter applied.
[1] Not really.
[2] Yes, really.
Change-Id: I11793b1d79dd0c3f70414ac8592b86181da59916
Reviewed-on: https://code.wireshark.org/review/5274
Reviewed-by: Gerald Combs <gerald@wireshark.org>
RFC draft http://www.ietf.org/id/draft-fox-tcpm-shared-memory-rdma-05.txt
used as reference for packet dissection.
A small change was made to packet-infiniband, to add the Queue Number to the
info column. This allows for easy indentification of session traffic for a
particular QP.
Also: infiniband: tvb_length() --> tvb_captured_length()
Bug: 10715
Change-Id: I774ceffaa5c271cb6a28ab4ed21e53cd42f2547b
Reviewed-on: https://code.wireshark.org/review/5386
Petri-Dish: Bill Meier <wmeier@newsguy.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Provides dissection for the elasticsearch protocol. This includes full
dissection of the multicast discovery protocol, the HTTP query interface
and partial dissection of the binary protocol.
Change-Id: I738fb498976e44fa05168c2bc3a7e842a9e96df9
Reviewed-on: https://code.wireshark.org/review/4948
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
As with the Developer's Guide, add user-guide-docinfo.xml, which lets us
carry over DocBook front matter. Remove the meta_info chapter. Most of
its contents are now in user-guide-docinfo.xml. Add a DocBook revision
history based on hints from the Git/SVN/CVS revision history.
Remove the various makefile targets for converting AsciiDoc files to
DocBook chapters. Remove GPL_appendix.xml. We use the AsciiDoc version.
Change-Id: I543fa2a92f2c735c5f00c97ec65cff2187e09e3a
Reviewed-on: https://code.wireshark.org/review/5216
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
João Valverde