protocol tree text for the control field - that protocol tree entry is
added by "dissect_xdlc_control()", which uses
"proto_tree_add_uint_format()" - and it's not a simple enumerated field
(which is why "proto_tree_add_uint_format()" is used, to show all the
various bits of the field). Eliminate it.
svn path=/trunk/; revision=1825
protocol tree text for the control field - that protocol tree entry is
added by "dissect_xdlc_control()", which uses
"proto_tree_add_uint_format()" - and it's not a simple enumerated field
(which is why "proto_tree_add_uint_format()" is used, to more fully
describe the field). Eliminate it.
svn path=/trunk/; revision=1824
UDP and into the handoff registration routines for the protocols in
question.
Make the dissectors for those protocols static if they're not called
outside the dissector's source file.
Get rid of header files if all they did was declare dissectors that are
now static; remove declarations of now-static dissectors from header
files that do more than just declare the dissector.
svn path=/trunk/; revision=1823
compilers support, and at least some versions of HP's PA-RISC C
compiler, for example (which people do use to compile Ethereal), don't
support them.
svn path=/trunk/; revision=1818
shouldn't stop the search as soon as we get back to the starting frame,
we should stop the search if the filter expression doesn't match and the
frame we tried it on was the starting frame - it's OK if we find the
starting frame, it's just not OK to continue if we don't find that
frame.
svn path=/trunk/; revision=1815
"proto_tree_add_item_format()" into multiple routines for different item
types, and to note that a subtree can be added under any item.
svn path=/trunk/; revision=1809
standard output, in the rules to get Flex to produce scanner code; that
way, if Flex fails to run for some reason, we don't leave around a
zero-length or otherwise incorrect "XXX-scanner.c" file that might
keep a subsequent make from thinking it has to generate that file.
svn path=/trunk/; revision=1808
"dfilter-grammar.h".
Use the "-o" flag, rather than using the "-t" flag and redirecting the
standard output, in the rules to get Flex to produce scanner code; that
way, if Flex fails to run for some reason, we don't leave around a
zero-length or otherwise incorrect "XXX-scanner.c" file that might
keep a subsequent make from thinking it has to generate that file.
svn path=/trunk/; revision=1807
Makefile.nmake clean" when "nmake -f Makefile.nmake clean" is done in
the top-level directory, so that "nmake -f Makefile.nmake clean" cleans
everything up.
svn path=/trunk/; revision=1792
be built as multi-threaded programs; add "/MT" to the list of compiler
flags.
Add "clean" rules in subdirectories, and run subdirectory "nmake -f
Makefile.nmake clean" when "nmake -f Makefile.nmake clean" is done in
the top-level directory, so that "nmake -f Makefile.nmake clean" cleans
everything up.
svn path=/trunk/; revision=1791
"dissect_init()" and "dissect_cleanup()", in "packet.c", so that we
don't duplicate those routines in Ethereal and Tethereal (and so on),
and don't have to remember to update N different versions of them if we
have to change the way we do one-time initialization and cleanup.
svn path=/trunk/; revision=1790
registration routines to get rid of the special handling of ONC RPC
protocols - dissectors for ONC RPC-based protocols should register their
protocol, fields, and ETT values in a protocol registration routine, and
register themselves with the ONC RPC dissector in their protocol handoff
routine, so that the latter is done after the ONC RPC dissector's
protocol registration routine is called, so that the data structures
needed when dissectors for ONC RPC protocols register themselves with
the ONC RPC dissector have been initialized.
Get rid of "init_dissect_rpc()", which initializes said data structures;
do that in "proto_register_rpc()" instead.
svn path=/trunk/; revision=1789
routine, which calls all routines found in the dissector source files
with names that match " proto_reg_handoff_[a-z_0-9A-Z]*".
Call "register_all_protocol_handoffs()" after calling
"register_all_protocols()" - "register_all_protocols()" needs to be
called first, so that all protocols can register their fields, because
registering a dissector as being called if field "proto.port" is equal
to N requires that "proto.port" be a registered field.
Give DNS a handoff registration routine, and register its dissector to
be called if "udp.port" is UDP_PORT_DNS; remove the registration of DNS
from "packet-udp.c", and make "dissect_dns()" static (as nobody else
need know that it exists).
svn path=/trunk/; revision=1788
pd/offset/fd/tree arguments, looks up the port number in the dissector
table, and:
if it finds it, call the corresponding dissector routine with
the pd/offset/fd/tree arguments, and return TRUE;
if it doesn't find it, return FALSE.
Use that in the TCP and UDP dissectors.
Don't add arbitrary UDP ports for which a dissector is found in the
table as ports that should be dissected as TFTP; this should only be
done if we find a packet going from port XXX to the official TFTP port.
Don't register TFTP in UDP's dissector table, as it has to be handled
specially (i.e., we have to add the source port as a TFTP port, although
we really should register the source port *and* IP address); eventually,
we should move that registration to the TFTP dissector itself, at which
point we can register TFTP normally.
svn path=/trunk/; revision=1785
hash table attached to "udp.port" out of "init_dissect_udp()" into
"proto_register_udp()", so that it's done the way TCP does it, and then
get rid of "init_dissect_udp()".
svn path=/trunk/; revision=1781
the check for plugins after the check for ONC RPC protocols, so that we
do the checks in the same order for TCP and UDP (ONC RPC first, as we
expect the RPC heuristics not to get false hits, and ONC RPC protocols
could well use ports that are nominally assigned to other protocols).
svn path=/trunk/; revision=1780
field, to allow dissectors to register their dissection routine in a
particular field's hash table with a particular "port" value, and to
make the TCP and UDP dissectors support that for their "port" field and
to look up ports in that hash table.
This replaces the hash table that the UDP dissector was using.
There's still more work needed to make this useful - right now, the hash
tables are attached to the protocol field in the register routines for
the TCP and UDP protocols, which means that the register routines for
protocols that run atop TCP and UDP can't use this unless their register
routines happen to be called after those for TCP and/or UDP, and several
other protocols need to attach hash tables to fields, and there's no
single global field for Ethernet types so we can't even attach a hash
table to such a field to allow protocols to register themselves with a
particular Ethertype - but it's a start.
svn path=/trunk/; revision=1779
reduces the memory required for one big capture file I have by about 10
megabytes, and speeds up the reading in of that file, presumably because
it amortizes the memory-allocator space and CPU time overhead over
a set of several "frame_data" structures.
svn path=/trunk/; revision=1776
One of those improvements adds an "exit now" after we've filled in the
protocol and info columns if we're not building a protocol tree,
obviating the need for the "parse only the first request in the sequence
if we're not building a protocol tree" code I stuck in, so remove the
latter code.
svn path=/trunk/; revision=1775
"global" dialog box when "Edit:Filters" is selected, so that the list of
filters can be edited, and "filter_browse_cb()", which pops up a dialog
box associated with a "Filter:" button and a text entry widget attached
to that button, so that a filter can be selected or saved (although it
also supports the same editing that the "global" dialog box does).
Have "filter_dialog_cb()" connect the window in which the "Filter:"
button lives and the filter dialog box, so that:
if the window in which the "Filter:" button lives goes away, so
does the filter dialog box (as it no longer has a text widget
into which it can stuff the selected filter);
if the "Filter:" button is clicked when there's already a filter
dialog box open, we just reactivate that existing dialog box
rather than popping up a new one.
Also keep a pointer to the "global" filter dialog box, so that we also
arrange that there's only one of them (by reactivating the existing on
if "Edit:Filters" is selected when there's already a "global" filter
dialog box open).
Keep around pointers to the dialog boxes that contain the "Filter:"
buttons, so that we can arrange that there be only one of them (that was
a side-effect of an earlier attempt at fixing the problems described
above, but it's still useful for keeping multiple competing dialog boxes
from being open - there's more of that to be done).
Make the pointer to the "Open Capture File" dialog box widget static to
"file_dlg.c" - nobody outside of "file_dlg.c cares about it.
svn path=/trunk/; revision=1774
