pinfo addresses are supposed to be valid after the routine that sets
them exits; therefore, the data mustn't be on the stack.
Change-Id: I7db48065b2cacad200fa6b18e19b68e130e535a5
Reviewed-on: https://code.wireshark.org/review/29492
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That removes most of the uses of the frame number field in the
frame_data structure.
Change-Id: Ie22e4533e87f8360d7c0a61ca6ffb796cc233f22
Reviewed-on: https://code.wireshark.org/review/13509
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Ie39ef054a4a942687bd079f3a4d8c2cc55d5f22c
Reviewed-on: https://code.wireshark.org/review/12485
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Replace CMP_ADDRESS, COPY_ADDRESS, et al with their lower-case
equivalents in the asn1 and epan directories.
Change-Id: I4043b0931d4353d60cffbd829e30269eb8d08cf4
Reviewed-on: https://code.wireshark.org/review/11200
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It is used to distinguish SCO streams.
Stream Number increase any time when new SCO connection is created.
Change-Id: I6cf68914112980cdbad345e52469bf2baf214551
Reviewed-on: https://code.wireshark.org/review/8510
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Specifically:
- Set packet.h to be the first wireshark #include after
config.h and "system" #includes.
packet.h added as an #include in some cases when missing.
- Remove some #includes included (directly/indirectly) in
packet.h. E.g., glib.h.
(Done only for those files including packet.h).
- As needed, move "system" #includes to be after config.h and
before wireshark #includes.
- Rework various #include file specifications for consistency.
- Misc.
Change-Id: Ifaa1a14b50b69fbad38ea4838a49dfe595c54c95
Reviewed-on: https://code.wireshark.org/review/5923
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Bill Meier <wmeier@newsguy.com>
Bluetooth dissector is used to add ability to filter all bluetooth
payload from capture files (there are many transport like:
hci_h4, hci_h1, hci_usb, hci_mon, btle). Also it is used to placeholder for
all data tree used to store additional informations like bd_addrs, names, etc.
Finally it is used to be one point for Bluetooth
Endpoints/Conversation filtering what is enabled now.
Also add Master/Slave Role and Connection Mode tracking.
Change-Id: I67048080fb8ee16fa0f4ec429c1257de81ddd737
Reviewed-on: https://code.wireshark.org/review/5771
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Bluetooth: SCO: Add Source/Destination addresses
Bluetooth: HCRP: Use information from SDP to decoding PSM payload
From Michal Labedzki
svn path=/trunk/; revision=53816
- when the text parameter is constant col_add_str() and col_set_str() are equivalent but col_set_str() is faster.
- same for replace col_append_fstr and col_append_str
- remove col_clear() when it's redundant:
+ before a col_set/col_add if the dissector can't throw an exception.
- replace col_append() after a col_clear() with faster col_add... or col_set
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9344
svn path=/trunk/; revision=52948
Bluetooth: Add support for source/destination addresses
Within resolving devices names. Also make header file more generic,
packet-hci_h4.h renamed to packet-bluetooth-hci.h.
Part of:
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5032
svn path=/trunk/; revision=46278
Specifically: Replace FALSE|0 and TRUE|1 by ENC_BIG_ENDIAN|ENC_LITTLE_ENDIAN as
the encoding parameter for proto_tree_add_item() calls which directly reference
an item in hf[] which has a type of:
FT_UINT8
FT_UINT16
FT_UINT24
FT_UINT32
FT_UINT64
FT_INT8
FT_INT16
FT_INT24
FT_INT32
FT_INT64
FT_FLOAT
FT_DOUBLE
svn path=/trunk/; revision=39288
FT_NONE
FT_BYTES
FT_IPV6
FT_IPXNET
FT_OID
Note: Encoding field set to ENC_NA only if the field was previously TRUE|FALSE|ENC_LITTLE_ENDIAN|ENC_BIG_ENDIAN
svn path=/trunk/; revision=39260
keys to have _uint in their names, to match the routines that handle
dissector tables with string keys. (Using _port can confuse people into
thinking they're intended solely for use with TCP/UDP/etc. ports when,
in fact, they work better for things such as Ethernet types, where the
binding of particular values to particular protocols are a lot
stronger.)
svn path=/trunk/; revision=35224
(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
Added support for Symbian OS btsnoop.
The bluetooth HCI layer in Symbian OS can be configured to log all packets to a
file. The log format, "btsnoop" is based on the RFC1761 "snoop" format - but
differences in the header make it incompatible.
The btsnoop format supports logging of these formats:
"H1" (raw HCI packets without framing)
"H4" (HCI UART packets including packet type header)
"H5" (HCI 3 wire UART packets including framing)
"BCSP" (HCI bluecore serial protocol including framing)
"H1" and "H4" are section numbers in the original v1 bluetooth specifications,
but still used colloquially - wireshark's existing support for Linux bluez HCI
logs uses the "H4" name.
In practice, the "H1" format is used for H5,BCSP and USB HCI logs, as the HCI
packet logs are mainly useful for debugging higher layers, bluetooth profiles
and bluetooth applications.
From me:
Deleted some unused prototypes.
Mark an unused parameter.
svn path=/trunk/; revision=24263
Gerald Combs