Move doc/README.packaging to the Developer's Guide and update the
content.
Change-Id: I25fda6cade8f3cfd11af865745bedd0fb5a7c86f
Reviewed-on: https://code.wireshark.org/review/31474
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: If49baf3e2b4e01f4ca4ea85415a3a291f8c04c92
Reviewed-on: https://code.wireshark.org/review/31354
Petri-Dish: Jim Young <jim.young.ws@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This allows taps that can fail to report an error and fail; a failed
tap's packet routine won't be called again, so they don't have to keep
track of whether they've failed themselves.
We make the return value from the packet routine an enum.
Don't have a separate type for the per-packet routine for "follow" taps;
they're expected to act like tap packet routines, so just use the type
for tap packet routines.
One tap packet routine returned -1; that's not a valid return value, and
wasn't one before this change (the return value was a boolean), so
presume the intent was "don't redraw".
Another tap routine's early return, without doing any work, returned
TRUE; this is presumably an error (no work done, no need to redraw), so
presumably it should be "don't redraw".
Clean up some white space while we're at it.
Change-Id: Ia7d2b717b2cace4b13c2b886e699aa4d79cc82c8
Reviewed-on: https://code.wireshark.org/review/31283
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When generating a capture file from a text file it can be helpfull
to be able to set the capture interface name in the generated IDB.
This can be especially true if later on the generated captures are
merged and the individual IDB's have to be compared. Without a name
every IDB of the same datalink type will be equal and subject to
merge. Also it keeps the individual streams identifiable for the
end user.
Change-Id: I70224379d88f516a0a356bf0b46aebafb69665f0
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/31015
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
1) The default build configuration is to select PCAPNG as
output format, but it can be selected as PCAP. Some of the
command line tools have the option to select the output
format and default towards the build configuration.
This has to be reflected in their help output also.
2) Various documentation files are still stating that PCAP is
the default format of various tools. With the default build
configuration being PCAPNG these have to be adjusted as well.
(with lack of dynamic content the documentation can only refer
to the default build configuration format).
Change-Id: I51d19642a7ed8c99817971c1f25d20972095021e
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/30951
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
With the introduction of the ip command (from iproute2) on modern
Linux systems it becomes common to see this tool available,
gradually replacing tools like netstat and ifconfig.
Change-Id: I1fb309e741c07c93271b61a35c4833d36bcc5cb8
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/30924
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Various parts of the text2pcap documentation need some fixing up.
This change brings them back in line and up to date with current
features.
Change-Id: I038cf5c4943d2a4bbcc3d0fbd8f5e111dcf0d0a9
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/30754
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add a new option to insert decryption secrets into a pcapng file.
Change-Id: I0e024585cac9a8a328e88d32f9eb03d37d350e2a
Ping-Bug: 15252
Reviewed-on: https://code.wireshark.org/review/30693
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make sure the -i <pipe> documentation is consistent and correct.
Change-Id: I9019effb658f914ac754e4ae893eafbe7c4b4da1
Reviewed-on: https://code.wireshark.org/review/30675
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Previously 'tshark -z expert' was failing with abort when a packet
contains a comment
- Add a new comment parameter and update the tshark's manual page
- Add a new comment_level severity and change the default lavel to it.
- Add various 'tshark -z expert' tests
Change-Id: I188317da5e00019b8f2b725f0fe84942f774520f
Reviewed-on: https://code.wireshark.org/review/30610
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add the ability to rotate files after a specified number of packets (`-b
packets:NUM`). Move some condition checks to capture_loop_write_packet_cb.
Add `-a packets:NUM` in order to be consistent. It is functionally
equivalent to the `-c` flag.
Add a corresponding "packets" option to the Capture Interfaces dialog
Output tab.
Add initial tests for autostop and ringbuffer conditions.
Change-Id: I66eb968927ed287deb8edb96db96d7c73526c257
Reviewed-on: https://code.wireshark.org/review/30534
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This adds val64_string_ext to parallel value_string_ext in the
same way that val64_string parallels value_string.
Change-Id: Iadbfc49f5a4540000ed92fd0469e8d273911e97e
Reviewed-on: https://code.wireshark.org/review/30385
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Register the follow_free as a finish callback.
Call the tap's finish callback in free_tap_listener which is called from
both remove_tap_listener and tap_cleanup.
Describe the finish callback in README.tapping
Change-Id: Ie79ce8f39b0ca6d84810d2e3307dcff38b18d3ac
Reviewed-on: https://code.wireshark.org/review/29309
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add 'v' option for VLAN ID resolving and get rid of
deprecated 'C' option.
Bug: 14826
Change-Id: I63104f4a465d251048693ad02882ea7eb2c4d926
Reviewed-on: https://code.wireshark.org/review/30029
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add an sdjournal extcap, which reads journal entries using the
sd-journal API and dumps them as journal Export Format records.
Change-Id: I17ccfa88ab5d053c16c869cd26e580d84022502e
Reviewed-on: https://code.wireshark.org/review/29479
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rename the "ssl" protocol to "tls" and add an "ssl" alias. Prefer "TLS"
over "SSL" in user interface text and in the documentation.
Fix the test_tls_master_secret test while we're here.
Bug: 14922
Change-Id: Iab6ba2c7c4c0f8f6dd0f6d5d90fac5e9486612f8
Reviewed-on: https://code.wireshark.org/review/29649
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
- It cannot support IPv6.
- Non-standard use (specifically recommended against in the RFCs)
of the IPv4 fragment ID field.
- Has a narrow and non-obvious use case, IMO.
- It is not supported in the Qt GUI.
- Significant maintenance burden for an obscure feature.
Change-Id: Icaf429269dc42f78c38b8d20001508132499faf8
Reviewed-on: https://code.wireshark.org/review/29239
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Implement a --seed option to be used in conjunction with -E. The option
allows the user to set the seed for the pseudo-random number generator,
which can be useful for recreating a particular sequence of errors.
Change-Id: Id427ab5fd7711652ad56c72271b2e0acb7380858
Reviewed-on: https://code.wireshark.org/review/29306
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
A CMake config-file package provides support for downstreams using
CMake and Wireshark libraries to easily configure the libwireshark
dependency with:
find_package(Wireshark CONFIG [REQUIRED])
target_link_libraries(foo epan)
The FindWireshark.cmake file is no longer needed.
See cmake-package(7) for more details on CMake's package system.
Change-Id: Ie8af1d44417a99dd08d37959f7b2ffca88572ec2
Reviewed-on: https://code.wireshark.org/review/29208
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Change the plugin compatibility check to make it more convenient to
define and check the major.minor Wireshark version.
Change-Id: I2a6d2a746682c29504311cce5c457e0a852c3daf
Reviewed-on: https://code.wireshark.org/review/29224
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Fix combination of pkg-config and CMake variables for feature
detection.
Remove non-system installation option. Just copy it manually for now.
Change-Id: Ia80c703c6ec3df0a49f8d56f1bd6da69471c523f
Reviewed-on: https://code.wireshark.org/review/29223
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Switch the AUTHORS heading markup from underscores to equals. This makes
it easier to transform to Pod headings.
Update the AUTHORS-SHORT-FORMAT output so that the author lists are
verbatim paragraphs. Add a style for the author lists instead of
wrapping everything in a <pre>.
The AUTHORS files are UTF-8 and wireshark.pod sets "=encoding utf8".
There's no need to translate characters.
Change-Id: I43cf18ff86774421b08edb84d968a9410be177fe
Reviewed-on: https://code.wireshark.org/review/29181
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We've set "=encoding utf8" in wireshark.pod for a long time. Do so in
the rest of our .pod files.
Change-Id: I3ef0fb3a88ed63275b4ff4362b6afbf13d79a0bc
Reviewed-on: https://code.wireshark.org/review/29182
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
This is useful when processing packets that were captured by multiple radios on the same channel.
Change-Id: I9dacc35294a4ed4e817014e563e7c9a54ee05e40
Reviewed-on: https://code.wireshark.org/review/28843
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move the information from README.extcap into docbook.
Change-Id: Ic6504787750d04fe6c66479896cba8d6148d804d
Reviewed-on: https://code.wireshark.org/review/28690
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Add ENC_TIME_SECS_NSECS and ENC_TIME_SECS_USECS; they make it more
explicit (especially to those not familiar with UN*X data types) what
the representation is, allow for ENC_TIME_SECS_MSECS etc. if they're
needed, and match names such as ENC_TIME_SECS and ENC_TIME_MSECS.
Change-Id: I6ab36fb4da70563587141cd65ffff8523477b0c4
Reviewed-on: https://code.wireshark.org/review/28564
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For testing live capture mode in the Qt UI, it is useful to have a
continous capture source with some dummy packets.
Change-Id: Id76ecbf24828dd3212b208c96679524e4c25b00f
Reviewed-on: https://code.wireshark.org/review/28537
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Set symbol visibility properly.
Add -Wall -Wextra GCC flags that were there previosuly.
Remove duplicate -I compiler flags. Remove useless "hello_EXPORTS" definition while at it.
Change-Id: Iac173f02e41b3b4f2999e5d71b95b910a9c2da11
Reviewed-on: https://code.wireshark.org/review/27744
Reviewed-by: João Valverde <j@v6e.pt>
This file was erroneously removed in 4a156da068.
This file is not part of Wireshark's (the application) build system.
We may want to convert the example to use CMake instead (purely for consistency) but until then configure.ac and Makefile.am are required files.
Change-Id: I7902ff71a44bba798e8dc7083103d4785095b374
Reviewed-on: https://code.wireshark.org/review/27684
Reviewed-by: João Valverde <j@v6e.pt>
Group arguments together to better present them, as well as to
have the possibility to better facilitate settings categories.
The order of tabs is defined by the numbering of arguments and
their appearance. If no tab can be found or no group has been
defined for the argument, a default tab will be added.
Change-Id: I032881193e09d4ad5d65c9f73fede87695acdace
Reviewed-on: https://code.wireshark.org/review/27054
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
They've been replaced by the Python scripts.
Change-Id: I8add9c9ea0a6bdd68b2fa3841977863c0ea9a761
Reviewed-on: https://code.wireshark.org/review/27243
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add missing section on display filter functions to WSUG and make it
consistent with the wireshark-filter(4) manual. "count" was added in
Wireshark 1.12 (bug 9480). "len" was added in Wireshark 1.6.x.
"size" (added in 1.8.x) is not documented since it works like "len",
except that it is not limited to strings and byte arrays. I think that
"len" should be extended to other types while removing "size".
Change-Id: I2c8e2b4a11f007de7852a797bed971af86840b47
Reviewed-on: https://code.wireshark.org/review/27146
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Now that we only support CMake, that file would be reduced to
Wireshark is built using CMake.
which doesn't justify keeping it around.
Change-Id: I07d0ce0689ab274fd6c7dff3d8e5a8b31e110cbb
Reviewed-on: https://code.wireshark.org/review/27139
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Gerald Combs