This allows cancelling connecting if e.g. the OCSP server is not
reachable. Previously this caused some delay in disconnecting state but
even worse it cause an ANR if the user tried reconnecting during that
time as the main thread would get struck in setNextProfile() (we could
probably find a better solution there too in the future).
It's reinstalled when reconnecting (or during error recovery) and
eventually uninstalled after disconnecting.
Only on Android 5+, otherwise we'd block our fetcher (and Android 4.4 is
stupid in regards to overlapping TUN devices anyway).
Note that Android 8's blocking feature blocks everything that passes by
the VPN, so this only works when tunneling everything (i.e. neither subnets,
nor apps can be excluded from the VPN if that feature is enabled).
Otherwise, a blocking VPN interface would prevent our fetcher from working
as we currently rely on an interface that doesn't allow access to the
underlying socket/FD, which would be required to call VpnService.protect().
Removing and readding the entry to a potentially different row/segment,
while driving out waiting and new threads, could prevent threads from
acquiring the SA even if they were waiting to check it out by unique
ID (which doesn't change), or if they were just trying to enumerate it.
With this change the row and segment doesn't change anymore and waiting
threads may acquire the SA. However, those looking for an IKE_SA by SPIs
might get one back that has a different SPI (but that's probably not
something that happens very often this early).
This was noticed because we check out SAs by unique ID in the Android
app to terminate them after failed retransmits if we are not reestablishing
the SA (otherwise we continue), and this sometimes failed.
Fixes: eaedcf8c00 ("ike-sa-manager: Add method to change the initiator SPI of an IKE_SA")
The button to view the log is now below the status info. And since the
IMC results are just below that we don't need a special handling for
that anymore.
This can happen on systems (e.g. Android 7.x) where Always-on VPNs are
triggered right after booting before the KeyChain is unlocked by the user.
Retrieving the certificate chain or private key then fails with
"KeyChainException: IllegalStateException: keystore is LOCKED" until the
user unlocks the screen once.
The built-in client actually also fails in this situation (e.g. with XAuth
RSA), it tries three times then stops and shows an error notification.
With Android 8.1 this isn't triggered after a reboot until the device
has been unlocked once (solving the issue with the key store) and traffic
may optionally be blocked by the user until the VPN is established.
There are still some issues (e.g. password prompts and fatal errors), and we
might need some workaround for older Android releases.
Only if there is no currently active (or previously active) profile does
this currently operate on the configured (or stored most recently used)
profile. This way it's possible to use a different connection and
quickly disable and re-enable it again. When unlocked the profile name
is shown, when locked a generic text is used (this detection doesn't seem
to work 100% reliably). To disconnect, the user is forced to unlock the
device, connecting is possible without, if the credentials are available
and no fatal error occurs (it even works with the system credential store,
at least on Android 8.1).
Note that the tile is not available right after a reboot. It seems that
the system has to be unlocked once to activate third-party tiles (will
be interesting to see how this works together with Always-on VPN).
Unfortunately, setLockscreenVisibility() doesn't seem to have any
effect. So the full notification is shown unless the user manually
configures the notification settings.
This allows us to add tiles to Quick Settings and enabling the Always-on
VPN feature in the VPN settings (both require API level 24, but 26 will
be required as targetSdkVersion later this year).
Unless there are profiles created with old versions of the app (< 1.8.0)
that were never updated since, all profiles should already have a UUID
assigned. If not, we do that now with a DB migration.
This is either because a third-party VPN app has the always-on feature
enabled, or because the user denied the permission in the system's confirmation
dialog.
If the always-on feature is enabled for a connection of the built-in VPN
client we get an IllegalStateException, for which we show an updated and
clearer error message.
The type of the value was incorrect (void**) if NULL was passed to cas_ptr()
as expected value, which caused a compiler warning with Clang because
__atomic_compare_exchange_n() expects the types of the first two arguments
to be the same.
armeabi has been superseded by armeabi-v7a and the MIPS ABIs were removed
with the latest NDK (r17), after being marked deprecated for a while.
By not specifying APP_ABI we build for all non-deprecated ABIs.
Instead of logging the search parameters for IKE configs (which were already
before starting the lookup) we log the configured settings.
The peer config lookup is also changed slightly by doing the IKE config
match first and skipping some checks if that or the local peer identity
doesn't match.
Although being already logged on level 2, these messages are usually just
confusing if they pop up randomly in the log when e.g. querying the configs
or installing traps. So after this the log messages will only be logged when
actually proposing or selecting traffic selectors during IKE.
This way we don't rely on the order of equally matching configs as
heavily anymore (which is actually tricky in vici) and this also doesn't
require repeating weak algorithms in all configs that might potentially be
selected if there are some clients that require them.
There is currently no ordering, so an explicitly configured exactly matching
proposal isn't a better match than e.g. the default proposal that also
contains the proposed algorithms.
In some scenarios we might find multiple usable peer configs with different
IKE proposals. This is a problem if we use a config with non-matching
proposals that later causes IKE rekeying to fail. It might even be a problem
already when creating the CHILD_SA if the proposals of IKE and CHILD_SA
are consistent.
There was a potential chance for a race condition if the ensured section
was purged for some reason before using it later.
This also changes the behavior for NULL/empty strings via load_string*
with merge == FALSE, which now purges the config/section.
Similar to the `also` keyword in ipsec.conf, the new syntax allows adding
one or more references to other sections, which means all the settings and
subsections defined there are inherited (values may be overridden, even
with an empty value to clear it).
It's important to note that all subsections are inherited, so if this is
used to reference a connection in swanctl.conf all auth rounds and
children are inherited. There is currently no syntax to limit the
inclusion level or clear inherited sections (but as mentioned, settings
in those inherited sections may be overridden).
Another property is that inherited settings or sections always follow
explicitly defined entries in the current section when they are enumerated.
This is relevant if the order is important (e.g. for auth rounds if `round`
is not specified).
References are evaluated dynamically at runtime, so referring to
sections later in the config file or included via other files is no
problem.
The colon used as separator to reference other sections may be used in
section names by writing :: (e.g. for Windows log file paths).
This is based on a patch originally written in 2016.
This way we get early log messages during plugin loading (including
integrity check results).
Instead of the fallback we could also remove the `customlog` namespace,
which was added to avoid conflicts with other settings/sections.
This was quite confusing previously: While calling insert_before()
and then remove_at() properly replaced the current item, calling them the
other way around inserted the new item before the previous item because
remove_at() changed the enumerator's position to the previous item.
The behavior in corner cases (calling the methods before or after
enumeration) is also changed slightly.
This allows switching to probing mode if the client is on a public IP
and this is the active task and connectivity gets restored. We only add
NAT-D payloads if we are currently behind a NAT (to detect changed NAT
mappings), a MOBIKE update that might follow will add them in case we
move behind a NAT.
Allow charon to start as a non-root user without CAP_CHOWN and still be
able to change the group on files that need to be accessed by charon
after capabilities have been dropped. This requires the user charon starts
as to have access to socket/pidfile directory as well as belong to the
group that charon will run as after dropping capabilities.
Closesstrongswan/strongswan#105.
Stater will lose update/reload commands when there is a second signal
coming in when the previous is still processed. This can happen more
easily with big configurations.
Closesstrongswan/strongswan#101.
In case the PRF's set_key() or allocate_bytes() method failed, skeyseed
was not initialized and the chunk_clear() call later caused a crash.
This could have happened with OpenSSL in FIPS mode when MD5 was
negotiated (and test vectors were not checked, in which case the PRF
couldn't be instantiated as the test vectors would have failed).
MD5 is not included in the default proposal anymore since 5.6.1, so
with recent versions this could only happen with configs that are not
valid in FIPS mode anyway.
Fixes: CVE-2018-10811
Tobias Brunner