electronics
/
osmo-small-hardware
10
0
Fork 2
Code Pull Requests Releases Activity

mv-uart: use Seeed Studio DRU

This commit is contained in:
Harald Welte 2016-10-08 22:04:08 +02:00
parent 1031c99873
commit 8da77d2d52
1 changed files with 34 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
multivoltage-uart/mv-uart.brd
View File

@ -765,7 +765,7 @@ Copyright: Würth Elektronik</description>
<class number="0" name="default" width="0" drill="0"> <class number="0" name="default" width="0" drill="0">
</class> </class>
</classes> </classes>
<designrules name="sysmocom-basista-4layer-prototype *"> <designrules name="SeeedStudio_2layer_DRU_no_angle_20140221 *">
<description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt; <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
&lt;p&gt; &lt;p&gt;
Die Standard-Design-Rules sind so gewählt, dass sie für Die Standard-Design-Rules sind so gewählt, dass sie für
@ -773,31 +773,35 @@ die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.</description> einem neuen Namen ab.</description>
<description language="en">&lt;b&gt;sysmocom Design rules for Basista 4-layer prototype&lt;/b&gt; <description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
&lt;p&gt; &lt;p&gt;
Please note that the minimum drill distance is &quot;two times diameter plus 10-20% between the The default Design Rules have been set to cover
center of the two drills&quot;. This cannot be expressed in EAGLE DRU, but has been computed a wide range of applications. Your particular design
for the minimum (VIA) drill of 0.3mm as 0.36mm.</description> may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.</description>
<description language="zh">&lt;b&gt;Seeed Studio EAGLE Design Rules&lt;/b&gt;
</description>
<param name="layerSetup" value="(1*16)"/> <param name="layerSetup" value="(1*16)"/>
<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/> <param name="mtCopper" value="0.035mm 0.0175mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.0175mm 0.035mm"/>
<param name="mtIsolate" value="1.55mm 0.55mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.46mm"/> <param name="mtIsolate" value="1.5mm 1.1mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
<param name="mdWireWire" value="0.15mm"/> <param name="mdWireWire" value="6mil"/>
<param name="mdWirePad" value="0.15mm"/> <param name="mdWirePad" value="6mil"/>
<param name="mdWireVia" value="0.15mm"/> <param name="mdWireVia" value="6mil"/>
<param name="mdPadPad" value="0.15mm"/> <param name="mdPadPad" value="6mil"/>
<param name="mdPadVia" value="0.15mm"/> <param name="mdPadVia" value="6mil"/>
<param name="mdViaVia" value="0.15mm"/> <param name="mdViaVia" value="6mil"/>
<param name="mdSmdPad" value="0.15mm"/> <param name="mdSmdPad" value="0mil"/>
<param name="mdSmdVia" value="0.15mm"/> <param name="mdSmdVia" value="0mil"/>
<param name="mdSmdSmd" value="0.15mm"/> <param name="mdSmdSmd" value="0mil"/>
<param name="mdViaViaSameLayer" value="8mil"/> <param name="mdViaViaSameLayer" value="8mil"/>
<param name="mnLayersViaInSmd" value="2"/> <param name="mnLayersViaInSmd" value="2"/>
<param name="mdCopperDimension" value="0.5mm"/> <param name="mdCopperDimension" value="10mil"/>
<param name="mdDrill" value="0.36mm"/> <param name="mdDrill" value="10mil"/>
<param name="mdSmdStop" value="0mil"/> <param name="mdSmdStop" value="0mil"/>
<param name="msWidth" value="0.15mm"/> <param name="msWidth" value="6mil"/>
<param name="msDrill" value="0.3mm"/> <param name="msDrill" value="0.3mm"/>
<param name="msMicroVia" value="9.99mm"/> <param name="msMicroVia" value="12mil"/>
<param name="msBlindViaRatio" value="0.5"/> <param name="msBlindViaRatio" value="0.5"/>
<param name="rvPadTop" value="0.25"/> <param name="rvPadTop" value="0.25"/>
<param name="rvPadInner" value="0.25"/> <param name="rvPadInner" value="0.25"/>
@ -806,15 +810,15 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description>
<param name="rvViaInner" value="0.25"/> <param name="rvViaInner" value="0.25"/>
<param name="rvMicroViaOuter" value="0.25"/> <param name="rvMicroViaOuter" value="0.25"/>
<param name="rvMicroViaInner" value="0.25"/> <param name="rvMicroViaInner" value="0.25"/>
<param name="rlMinPadTop" value="0.15mm"/> <param name="rlMinPadTop" value="10mil"/>
<param name="rlMaxPadTop" value="20mil"/> <param name="rlMaxPadTop" value="20mil"/>
<param name="rlMinPadInner" value="0.15mm"/> <param name="rlMinPadInner" value="10mil"/>
<param name="rlMaxPadInner" value="20mil"/> <param name="rlMaxPadInner" value="20mil"/>
<param name="rlMinPadBottom" value="0.15mm"/> <param name="rlMinPadBottom" value="10mil"/>
<param name="rlMaxPadBottom" value="20mil"/> <param name="rlMaxPadBottom" value="20mil"/>
<param name="rlMinViaOuter" value="0.15mm"/> <param name="rlMinViaOuter" value="6mil"/>
<param name="rlMaxViaOuter" value="20mil"/> <param name="rlMaxViaOuter" value="20mil"/>
<param name="rlMinViaInner" value="0.15mm"/> <param name="rlMinViaInner" value="6mil"/>
<param name="rlMaxViaInner" value="20mil"/> <param name="rlMaxViaInner" value="20mil"/>
<param name="rlMinMicroViaOuter" value="4mil"/> <param name="rlMinMicroViaOuter" value="4mil"/>
<param name="rlMaxMicroViaOuter" value="20mil"/> <param name="rlMaxMicroViaOuter" value="20mil"/>
@ -822,16 +826,16 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description>
<param name="rlMaxMicroViaInner" value="20mil"/> <param name="rlMaxMicroViaInner" value="20mil"/>
<param name="psTop" value="-1"/> <param name="psTop" value="-1"/>
<param name="psBottom" value="-1"/> <param name="psBottom" value="-1"/>
<param name="psFirst" value="-1"/> <param name="psFirst" value="0"/>
<param name="psElongationLong" value="100"/> <param name="psElongationLong" value="100"/>
<param name="psElongationOffset" value="100"/> <param name="psElongationOffset" value="100"/>
<param name="mvStopFrame" value="1"/> <param name="mvStopFrame" value="1"/>
<param name="mvCreamFrame" value="0"/> <param name="mvCreamFrame" value="0"/>
<param name="mlMinStopFrame" value="0.15mm"/> <param name="mlMinStopFrame" value="2mil"/>
<param name="mlMaxStopFrame" value="0.15mm"/> <param name="mlMaxStopFrame" value="2mil"/>
<param name="mlMinCreamFrame" value="0mil"/> <param name="mlMinCreamFrame" value="0mil"/>
<param name="mlMaxCreamFrame" value="0mil"/> <param name="mlMaxCreamFrame" value="0mil"/>
<param name="mlViaStopLimit" value="0mil"/> <param name="mlViaStopLimit" value="100mil"/>
<param name="srRoundness" value="0"/> <param name="srRoundness" value="0"/>
<param name="srMinRoundness" value="0mil"/> <param name="srMinRoundness" value="0mil"/>
<param name="srMaxRoundness" value="0mil"/> <param name="srMaxRoundness" value="0mil"/>
@ -842,7 +846,7 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description>
<param name="checkGrid" value="0"/> <param name="checkGrid" value="0"/>
<param name="checkAngle" value="0"/> <param name="checkAngle" value="0"/>
<param name="checkFont" value="1"/> <param name="checkFont" value="1"/>
<param name="checkRestrict" value="1"/> <param name="checkRestrict" value="0"/>
<param name="useDiameter" value="13"/> <param name="useDiameter" value="13"/>
<param name="maxErrors" value="50"/> <param name="maxErrors" value="50"/>
</designrules> </designrules>