dect
/
linux-2.6
Archived
13
0
Fork 0
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/arch/arm/mach-omap2
Balaji T K 1fcecf281b ARM: OMAP4: MMC: increase delay for pbias
4 micro seconds is not enough for PBIAS if MMC regulator is
enabled from MMC regulator OFF.
Increase the delay for PBIAS to stabilize.
Wait for PBIAS and timeout if not.

Resolves MMC/SD failure on OMAP4
"Pbias Voltage is not same as LDO"

Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by:  Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 04:48:15 -07:00
..
include/mach Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linux 2011-05-24 15:35:54 +09:00
Kconfig omap: drop board-igep0030.c 2011-05-17 03:31:24 -07:00
Makefile Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-05-26 12:11:54 -07:00
Makefile.boot
board-2430sdp.c ARM: OMAP2: Add missing include of linux/gpio.h 2011-05-31 06:17:01 -07:00
board-3430sdp.c OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o 2011-05-31 06:17:02 -07:00
board-3630sdp.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-03-17 19:28:15 -07:00
board-4430sdp.c ARM: OMAP4: MMC: no regulator off during probe for eMMC 2011-06-01 02:25:04 -07:00
board-am3517crane.c arm: omap2plus: GPIO cleanup 2011-05-12 02:52:06 -07:00
board-am3517evm.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-05-26 12:11:54 -07:00
board-apollon.c ARM: OMAP2: Add missing include of linux/gpio.h 2011-05-31 06:17:01 -07:00
board-cm-t35.c arm: omap2plus: move NAND_BLOCK_SIZE out of boards 2011-06-01 02:25:05 -07:00
board-cm-t3517.c arm: omap2plus: move NAND_BLOCK_SIZE out of boards 2011-06-01 02:25:05 -07:00
board-devkit8000.c arm: omap2plus: move NAND_BLOCK_SIZE out of boards 2011-06-01 02:25:05 -07:00
board-flash.c omap: Fix compile if MTD_NAND_OMAP2 is not selected 2011-02-25 10:19:21 -08:00
board-flash.h omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-generic.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-h4.c omap: Fix H4 init_irq to not call h4_init_flash 2011-03-10 09:51:29 -08:00
board-igep0020.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-05-26 12:11:54 -07:00
board-ldp.c omap: musb: introduce default board config 2011-05-09 08:15:31 -07:00
board-n8x0.c arm: omap2plus: GPIO cleanup 2011-05-12 02:52:06 -07:00
board-omap3beagle.c arm: omap2plus: move NAND_BLOCK_SIZE out of boards 2011-06-01 02:25:05 -07:00
board-omap3evm.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-05-26 12:11:54 -07:00
board-omap3logic.c omap: use common initialization for PMIC i2c bus 2011-05-03 02:51:45 -07:00
board-omap3pandora.c arm: omap2plus: move NAND_BLOCK_SIZE out of boards 2011-06-01 02:25:05 -07:00
board-omap3stalker.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-05-26 12:11:54 -07:00
board-omap3touchbook.c arm: omap2plus: move NAND_BLOCK_SIZE out of boards 2011-06-01 02:25:05 -07:00
board-omap4panda.c ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init 2011-06-01 02:25:04 -07:00
board-overo.c arm: omap2plus: move NAND_BLOCK_SIZE out of boards 2011-06-01 02:25:05 -07:00
board-rm680.c omap: musb: introduce default board config 2011-05-09 08:15:31 -07:00
board-rx51-peripherals.c omap: rx51: Don't power up speaker amplifier at bootup 2011-06-01 02:25:05 -07:00
board-rx51-video.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-05-26 12:11:54 -07:00
board-rx51.c OMAP3: clean-up mach specific cpuidle data structures 2011-05-20 17:15:53 +02:00
board-ti8168evm.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-zoom-debugboard.c arm: omap2plus: GPIO cleanup 2011-05-12 02:52:06 -07:00
board-zoom-display.c OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o 2011-05-31 06:17:02 -07:00
board-zoom-peripherals.c arm: omap2plus: GPIO cleanup 2011-05-12 02:52:06 -07:00
board-zoom.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-03-17 19:28:15 -07:00
clkt2xxx_apll.c OMAP2xxx: clock: add clockfw autoidle support for APLLs 2011-03-07 20:02:13 -07:00
clkt2xxx_dpll.c OMAP2: clock: add DPLL autoidle support 2011-03-07 20:02:05 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control 2011-03-07 20:02:21 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c OMAP3: set the core dpll clk rate in its set_rate function 2011-05-13 07:08:18 -07:00
clkt_clksel.c arm: omap2: clksel: fix compile warningOrganization: Texas Instruments\n 2011-02-16 17:49:35 -08:00
clkt_dpll.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
clkt_iclk.c OMAP2430/3xxx: clock: add modem clock autoidle support 2011-03-07 20:03:12 -07:00
clock.c perf: add OMAP support for the new power events 2011-03-11 07:21:44 -08:00
clock.h OMAP2xxx: clock: remove dsp_irate_ick 2011-03-07 20:21:17 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP: clock: fix compile warning 2011-03-09 18:44:28 -07:00
clock3xxx.c OMAP2+: clock: disable autoidle on all clocks during clock init 2011-02-25 16:10:42 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3xxx_data.c Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linux 2011-03-22 14:27:36 +09:00
clock34xx.c OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock34xx.h OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clock data: Change DSS clock aliases 2011-04-20 12:43:56 -06:00
clock2420_data.c Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linux 2011-03-22 14:27:36 +09:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock2430_data.c Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linux 2011-03-22 14:27:36 +09:00
clock3517.c OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP2xxx: clock: remove dsp_irate_ick 2011-03-07 20:21:17 -07:00
clockdomain.c Fix common misspellings 2011-03-31 11:26:23 -03:00
clockdomain.h Fix common misspellings 2011-03-31 11:26:23 -03:00
clockdomain2xxx_3xxx.c OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable 2011-02-25 16:06:48 -07:00
clockdomain44xx.c OMAP4: clockdomain: Add wkup/sleep dependency support 2011-02-25 16:09:05 -07:00
clockdomains2xxx_3xxx_data.c omap2/3: clockdomains: fix compile-time warnings 2011-03-07 20:21:17 -07:00
clockdomains44xx_data.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
cm-regbits-24xx.h OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:02:57 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL 2011-04-20 12:43:56 -06:00
cm2xxx_3xxx.h OMAP2xxx: clock: add clockfw autoidle support for APLLs 2011-03-07 20:02:13 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP4: clockdomain: Add wkup/sleep dependency support 2011-02-25 16:09:05 -07:00
cminst44xx.c OMAP4: CM: Add CM accesor api for bitwise control 2011-02-25 16:09:05 -07:00
cminst44xx.h OMAP4: CM: Add CM accesor api for bitwise control 2011-02-25 16:09:05 -07:00
common-board-devices.c arm: omap2plus: fix ads7846 pendown gpio request 2011-06-01 02:25:04 -07:00
common-board-devices.h arm: omap2plus: move NAND_BLOCK_SIZE out of boards 2011-06-01 02:25:05 -07:00
common.c Merge branch 'for_2.6.39/pm-misc' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-10 18:54:14 -08:00
control.c OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL 2011-04-20 12:43:56 -06:00
control.h treewide: fix a few typos in comments 2011-05-10 10:16:21 +02:00
cpuidle34xx.c OMAP3: cpuidle: change the power domains modes determination logic 2011-05-20 17:15:54 +02:00
devices.c OMAP4: fix return value of omap4_l3_init 2011-06-01 02:25:04 -07:00
devices.h [media] omap3: Add function to register omap3isp platform device structure 2011-03-22 04:53:42 -03:00
display.c OMAP2PLUS: DSS2: Clean up omap_display_init() 2011-05-11 14:20:11 +03:00
dma.c Fix common misspellings 2011-03-31 11:26:23 -03:00
dpll3xxx.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
dpll44xx.c omap4: dpll: Enable auto gate control for all MX postdividers 2011-02-25 16:10:17 -07:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpio.c Fix common misspellings 2011-03-31 11:26:23 -03:00
gpmc-nand.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
gpmc-onenand.c OMAP: OneNAND: let boards determine OneNAND frequency 2011-02-17 15:44:46 -08:00
gpmc-smc91x.c arm: omap2plus: GPIO cleanup 2011-05-12 02:52:06 -07:00
gpmc-smsc911x.c arm: omap2plus: GPIO cleanup 2011-05-12 02:52:06 -07:00
gpmc.c arm: Cleanup the irq namespace 2011-03-29 14:47:57 +02:00
hsmmc.c ARM: OMAP4: MMC: increase delay for pbias 2011-06-01 04:48:15 -07:00
hsmmc.h ARM: OMAP4: MMC: no regulator off during probe for eMMC 2011-06-01 02:25:04 -07:00
hwspinlock.c omap: add hwspinlock device 2011-02-17 09:52:43 -08:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 2011-03-14 11:12:54 -07:00
io.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c omap: IOMMU: add support to callback during fault handling 2011-02-24 14:23:17 -08:00
irq.c arm: omap2/3: Use generic irq chip 2011-05-16 02:28:58 -07:00
mailbox.c Merge branch 'for_2.6.39/pm-misc' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-10 18:54:14 -08:00
mcbsp.c Fix common misspellings 2011-03-31 11:26:23 -03:00
mux.c ARM: omap2+: mux: Allow board mux settings to be NULL 2011-06-01 02:25:04 -07:00
mux.h ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init 2011-06-01 02:25:04 -07:00
mux34xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux44xx.c ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init 2011-06-01 02:25:04 -07:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h Fix common misspellings 2011-03-31 11:26:23 -03:00
omap-headsmp.S ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL 2011-03-09 16:38:36 -08:00
omap-hotplug.c ARM: CPU hotplug: remove bug checks in platform_cpu_die() 2010-12-20 15:09:10 +00:00
omap-iommu.c OMAP: iommu: make iva2 iommu selectable 2010-12-15 11:33:31 -06:00
omap-smp.c ARM: consolidate SMP cross call implementation 2011-05-23 16:53:17 +01:00
omap4-common.c ARM: 6755/1: omap4: l2x0: Populate set_debug() function and enable Errata 727915 2011-03-09 00:18:47 +00:00
omap44xx-smc.S ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL 2011-03-09 16:38:36 -08:00
omap_hwmod.c OMAP2+: mux: fix compilation warnings 2011-06-01 00:16:04 -07:00
omap_hwmod_3xxx_data.c OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup. 2011-04-20 12:43:56 -06:00
omap_hwmod_44xx_data.c omap4: hwmod: Enable the keypad 2011-06-01 02:25:05 -07:00
omap_hwmod_2420_data.c OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup. 2011-04-20 12:43:56 -06:00
omap_hwmod_2430_data.c OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup. 2011-04-20 12:43:56 -06:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_l3_noc.c OMAP3/4: l3: minor cleanup for parenthesis and extra spaces 2011-05-03 02:38:01 -07:00
omap_l3_noc.h OMAP4: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:58 +05:30
omap_l3_smx.c Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-next 2011-05-17 03:44:50 -07:00
omap_l3_smx.h OMAP3: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:57 +05:30
omap_opp_data.h OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
omap_phy_internal.c ARM: OMAP2: Add missing iounmap in omap4430_phy_init 2011-06-01 02:25:04 -07:00
omap_twl.c Fix common misspellings 2011-03-31 11:26:23 -03:00
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
opp3xxx_data.c Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-11 09:39:58 -08:00
opp4xxx_data.c Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-11 09:39:58 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm-debug.c mach-omap2: pm: world-writable debugfs timer files 2011-02-04 12:08:12 -08:00
pm.c OMAP4: Intialize IVA Device in addition to DSP device. 2011-04-26 02:45:32 -07:00
pm.h OMAP3: cpuidle: change the power domains modes determination logic 2011-05-20 17:15:54 +02:00
pm24xx.c Merge branch 'integration-2.6.39-for-tony' of git://git.pwsan.com/linux-integration into omap-for-linus 2011-03-11 09:20:03 -08:00
pm34xx.c OMAP3: PM: Boot message is not an error, and not helpful, remove it 2011-05-20 17:15:54 +02:00
pm44xx.c OMAP4: PM: remove redundant #ifdef CONFIG_PM 2011-05-03 02:38:03 -07:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c Fix common misspellings 2011-03-31 11:26:23 -03:00
powerdomain.h Fix common misspellings 2011-03-31 11:26:23 -03:00
powerdomain2xxx_3xxx.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: fix bank power state bitfields 2011-03-07 19:28:15 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
powerdomains3xxx_data.c Fix common misspellings 2011-03-31 11:26:23 -03:00
powerdomains44xx_data.c OMAP2+: powerdomain: fix bank power state bitfields 2011-03-07 19:28:15 -07:00
prcm-common.h Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
prcm.c ARM: OMAP: Allow platforms to hook reset cleanly 2011-01-27 16:39:48 -08:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h omap4: clockdomain: Fix the CPUx domain name 2011-03-01 16:36:20 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm2xxx_3xxx.c OMAP2+: hwmod: use status bit info for reset line 2011-03-10 03:23:56 -07:00
prm2xxx_3xxx.h OMAP2+: hwmod: use status bit info for reset line 2011-03-10 03:23:56 -07:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
serial.c OMAP2+: hwmod: rename some init functions 2011-02-28 12:04:35 -07:00
sleep24xx.S ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM 2011-02-04 14:26:08 +00:00
sleep34xx.S Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-03-17 19:28:15 -07:00
smartreflex-class3.c OMAP: smartreflex: move plat/smartreflex.h to mach-omap2/smartreflex.h 2011-03-07 20:05:08 -07:00
smartreflex.c OMAP3+: smartreflex: delete debugfs entries on probe error 2011-05-03 02:38:03 -07:00
smartreflex.h OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h 2011-03-07 20:05:08 -07:00
sr_device.c OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h 2011-03-07 20:05:08 -07:00
sram34xx.S Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-03-17 19:28:15 -07:00
sram242x.S ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM 2011-02-04 14:26:08 +00:00
sram243x.S ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM 2011-02-04 14:26:08 +00:00
timer-gp.c Merge branch 'devel-cleanup' into omap-for-linus 2011-03-02 17:07:14 -08:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception 2011-02-23 17:54:55 +00:00
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-host.c arm: omap: usb: cleanup ehci and ohci resources and devices 2011-03-01 17:02:44 +02:00
usb-musb.c Merge branch 'for-tony' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb into omap-for-linus 2011-05-24 00:04:49 -07:00
usb-tusb6010.c arm: omap2plus: GPIO cleanup 2011-05-12 02:52:06 -07:00
vc.h OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vc3xxx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vc44xx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
voltage.c Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-next 2011-05-17 03:44:50 -07:00
voltage.h OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
voltagedomains3xxx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
voltagedomains44xx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vp.h OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vp3xxx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vp44xx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
wd_timer.c omap2+: wdt: trivial sparse fixes 2011-01-06 19:58:28 -08:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00