752451f01c
Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ... |
||
|---|---|---|
| .. | ||
| i2c-at91.txt | ||
| i2c-cbus-gpio.txt | ||
| i2c-davinci.txt | ||
| i2c-designware.txt | ||
| i2c-gpio.txt | ||
| i2c-imx.txt | ||
| i2c-mpc.txt | ||
| i2c-mux-gpio.txt | ||
| i2c-mux-pinctrl.txt | ||
| i2c-mux.txt | ||
| i2c-mv64xxx.txt | ||
| i2c-mxs.txt | ||
| i2c-nomadik.txt | ||
| i2c-ocores.txt | ||
| i2c-octeon.txt | ||
| i2c-omap.txt | ||
| i2c-pnx.txt | ||
| i2c-pxa-pci-ce4100.txt | ||
| i2c-pxa.txt | ||
| i2c-s3c2410.txt | ||
| i2c-sirf.txt | ||
| i2c-versatile.txt | ||
| i2c-xiic.txt | ||
| trivial-devices.txt | ||